Evaluation of anti-tumor effects of crocin on a novel 3D tissue-engineered tumor model based on sodium alginate/gelatin microbead

Hyaluronan-based Hydrogels for 3D Modelling of Tumour Tissues

Although routine 2D cell culture techniques have advanced basic cancer research owing to their simplicity, cost-effectiveness, and reproducibility, they have limitations that necessitate the development of advanced 3D tumour models that better recapitulate the tumour microenvironment. Various biomaterials have been used to establish these 3D models, enabling the study of cancer cell behaviour within different matrices. Hyaluronic acid (HA), a key component of the extracellular matrix in tumour tissues, has been widely studied and employed in the development of multiple cancer models. This review first examines the role of HA in tumours, including its function as an extracellular matrix (ECM) component and regulator of signalling pathways that affect tumour progression. It then explores HA-based models for various cancers, focusing on HA as a central component of the 3D matrix and its mobilization within the matrix for targeted studies of cell behaviour and drug testing. The tumour models discussed included those for breast cancer, glioblastoma, fibrosarcoma, gastric cancer, hepatocellular carcinoma, and melanoma. The review concludes with a discussion of future prospects for developing more robust and high-throughput HA-based models to more accurately mimic the tumour microenvironment and improve drug testing.

The effect of saffron and its extracts on the treatment of breast cancer: A narrative review

Breast cancer (BC) is the most prevalent malignancy in women and the second most common disease worldwide, affecting approximately one million individuals annually. Despite the efficacy of conventional chemotherapy, medication resistance and adverse effects limit its effectiveness, leading researchers to explore alternative treatments, including herbal remedies. Saffron, a well-known spice derived from the Crocus sativus L. plant, has shown potential as a BC treatment. The active components of saffron exhibit anti-cancer properties by inducing apoptosis, inhibiting cell division, and modulating signaling pathways implicated in cancer development, such as PI3K/AKT, NF-κB, and MAPK. Clinical findings suggest that saffron can alleviate chemotherapy-induced symptoms, reduce serum tumor marker levels, and enhance quality of life. Preliminary clinical trials are investigating the safety and efficacy of saffron in treating BC, with recent evidence indicating that recommended doses of saffron supplementation are well-tolerated and safe. This review provides an overview of the anti-tumor effects of saffron and its unique chemical composition in BC. However, further research and clinical studies are imperative to fully comprehend the potential of saffron in adjuvant therapy for BC patients.

A comprehensive review on 3D tissue models: Biofabrication technologies and preclinical applications

The limitations of traditional two-dimensional (2D) cultures and animal testing, when it comes to precisely foreseeing the toxicity and clinical effectiveness of potential drug candidates, have resulted in a notable increase in the rate of failure during the process of drug discovery and development. Three-dimensional (3D) in-vitro models have arisen as substitute platforms with the capacity to accurately depict in-vivo conditions and increasing the predictivity of clinical effects and toxicity of drug candidates. It has been found that 3D models can accurately represent complex tissue structure of human body and can be used for a wide range of disease modeling purposes. Recently, substantial progress in biomedicine, materials and engineering have been made to fabricate various 3D in-vitro models, which have been exhibited better disease progression predictivity and drug effects than convention models, suggesting a promising direction in pharmaceutics. This comprehensive review highlights the recent developments in 3D in-vitro tissue models for preclinical applications including drug screening and disease modeling targeting multiple organs and tissues, like liver, bone, gastrointestinal tract, kidney, heart, brain, and cartilage. We discuss current strategies for fabricating 3D models for specific organs with their strengths and pitfalls. We expand future considerations for establishing a physiologically-relevant microenvironment for growing 3D models and also provide readers with a perspective on intellectual property, industry, and regulatory landscape.

Characterization and comparison of cardiomyocyte protection activities of non-starch polysaccharides from six ginseng root herbal medicines

Ginseng is rich of polysaccharides, however, the evidence supporting polysaccharides to distinguish various ginseng species is rarely reported. Focusing on six root ginseng (e.g., Panax ginseng-PG, P. quinquefolius-PQ, P. notoginseng-PN, red ginseng-RG, P. japonicus-PJ, and P. japonicus var. major-PJM), the contained non-starch polysaccharides (NPs) were structurally characterized and compared by both the chemical and biological evaluation. Holistic fingerprinting at three levels (the NPs and the acid hydrolysates involving oligosaccharides and monosaccharides) utilized various chromatography methods, and the treatment of H9c2 cells with the NPs by OGD and H2O2-induced injury models was used to assess the protective effect. NPs from six Panax herbal medicines occupied about 20 % of the total polysaccharides, which were of the highest content in RG and the lowest in PN. NPs from six ginseng exhibited weak differentiations in the molecular weight distribution, while marker oligosaccharides were found to distinguish PN and RG from the others. Glc and GalA were more abundant in the NPs for PG and RG, respectively. NPs from PQ (100/200 μg/mL) showed significant cardiomyocyte protection effect by regulating the mitochondrial functions. This work further testifies the role of polysaccharides in quality control of herbal medicine, with new markers discovered beneficial to distinguish the ginseng.

Multi compartmental 3D breast cancer disease model–recapitulating tumor complexity in in-vitro

Breast cancer is the most common ailment among women. In 2020, it had the highest incidence of any type of cancer. Many Phase II and III anti-cancer drugs fail due to efficacy, durability, and side effects. Thus, accelerated drug screening models must be accurate. In-vivo models have been used for a long time, but delays, inconsistent results, and a greater sense of responsibility among scientists toward wildlife have led to the search for in-vitro alternatives. Stromal components support breast cancer growth and survival. Multi-compartment Transwell models may be handy instruments. Co-culturing breast cancer cells with endothelium and fibroblasts improves modelling. The extracellular matrix (ECM) supports native 3D hydrogels in natural and polymeric forms. 3D Transwell cultured tumor spheroids mimicked in-vivo pathological conditions. Tumor invasion, migration, Trans-endothelial migration, angiogenesis, and spread are studied using comprehensive models. Transwell models can create a cancer niche and conduct high-throughput drug screening, promising future applications. Our comprehensive shows how 3D in-vitro multi compartmental models may be useful in producing breast cancer stroma in Transwell culture.

Therapeutic implications of crocin in Parkinson's disease: A review of preclinical research

Parkinson's disease is among the most common forms of neurodegenerative illness, with present treatment being primarily symptomatic and frequently coming with substantial adverse effects. Neuronal degeneration may arise due to a variety of pathological events, like inflammatory responses, neurotransmitter dysregulation, oxidative damage, mitochondrial malfunction, apoptosis, and genetic factors. The health issue and financial burden brought on by Parkinson's disease can worsen as the population ages. In the search for new and secure therapeutic agents for Parkinson's disease, several natural compounds have been shown to exert considerable neuroprotective benefits. Crocin, a naturally occurring carotenoid molecule, was found to have neuroprotective potential in the therapy of this disorder. Taking into account, the outcomes of various studies and the restorative actions of crocin, the present study emphasized the protective ability of crocin in this disease. Given the strong evidence supporting the neuroprotective ability of crocin, it is inferred that crocin inhibits inflammatory, apoptotic, and antioxidant processes through multiple mechanisms. Therefore, this compound is considered a safe and effective therapeutic choice for neurodegenerative illnesses like Parkinson's disease. However, more research on its efficacy as a treatment of Parkinson's disease is needed, specifically examining its mechanisms and the results obtained in clinical trials.

Fabrication and detection of a novel hybrid conductive scaffold based on alginate/gelatin/carboxylated carbon nanotubes (Alg/Gel/mMWCNTs) for neural tissue engineering

Carbon nanotubes (CNTs), as kinds of conductive carbon nanomaterials, were widely applied in neural tissue engineering due to their excellent electrical conductivity and good biocompatibility. In this study, the carboxyl-modified multi-walled carbon nanotubes (mMWCNTs) were introduced into sodium alginate/gelatin (Alg/Gel) scaffolds to optimize the function of the hybrid scaffolds. The Alg/Gel/mMWCNTs conductive scaffolds with mMWCNTs content of 1%, 3%, and 5% were prepared by freeze-drying, respectively. Following this, the physicochemical properties and biocompatibility of the hybrid scaffolds at different magnetic field intensities were evaluated. The conductive scaffolds were characterized by Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). In general, the mMWCNTs addition improved the hydrophilic, electrical conductivity and mechanical properties of the composite scaffold, and PC12 cells showed a trend of gradual increase over culture time. Particularly, the Alg/Gel-1%C scaffold exhibited the best cell proliferation behavior. Briefly, the surface contact angle decreased from 74 ± 1° to 60 ± 3°, the electrical conductivity and compressive modulus increased to 1.32 × 10^-3 ± 2.1 × 10^-4 S/cm and 1.40 ± 0.076 Mpa, the G1 phase from 55.67 ± 1.86% to 59.77 ± 0.94% and the G2 phase from 10.32 ± 0.35% to 13.93 ± 1.26%，respectively. In the SEM images, PC12 cells were well-shaped and densely distributed. Therefore, the Alg/Gel/mMWCNTs conductive scaffold has potential as a tissue engineering scaffold in nerve regeneration.

Sodium alginate based drug delivery in management of breast cancer

Among women, breast cancer (B·C.) is a common form of cancer that can strike either developed or developing countries. In addition to pregnancy-related variables, hormone therapy lifestyle factors (e.g., physical inactivity, smoking, and alcohol use) may all influence the progression of B·C. The creation of anti-B·C. medication carriers with better stability, controlled and targeted administration, and the goal of minimizing unwanted effects has taken a lot of time and effort. Naturally generated biopolymers-based pharmaceutical delivery techniques have attracted attention for their potential use in treating B·C. It's been shown that natural polymers can deliver high medication concentrations to the desired place and provide prolonged release of pharmaceuticals useful in treating B.C. Alginate is one of the most commonly used drug carriers for delayed and targeted release. In present review will discuss the utilization of sodium alginate as an carrier of anticancer drug, such as paclitaxel, doxorubicin, tamoxifen, curcumin, and others.

Mechanochemical preparation of triptolide-loaded self-micelle solid dispersion with enhanced oral bioavailability and improved anti-tumor activity

Triptolide (TP), a compound isolated from a Chinese medicinal herb, possesses potent anti-tumor, immunosuppressive, and anti-inflammatory properties, but was clinically limited due to its poor solubility, bioavailability, and toxicity. Considering the environment-friendly, low-cost mechanochemical techniques and potential dissolution enhancement ability of Na₂GA, an amorphous solid dispersion (Na₂GA&TP-BM) consisting of TP and Na₂GA were well-prepared to address these issues. The performance of Na₂GA&TP-BM was improved through ball milling, such as from crystalline state to an amorphous solid dispersion, suitable nano micelle size and surface potential, and increased solubility. This change had a significant improvement of pharmacokinetic behavior in mice and could be able to extend the blood circulation time of the antitumor drug. Moreover, in vitro and in vivo anti-tumor study showed that Na₂GA&TP-BM displayed more potent cytotoxicity to tumor cells. The work illustrated an environment-friendly and safe preparation of the TP formulation, which was promising to enhance the oral bioavailability and antitumor ability of TP, might be considered for efficient anticancer therapy.

Characterization of Tuna Gelatin-Based Hydrogels as a Matrix for Drug Delivery

The skin of yellowfin tuna is one of the fishery industry solid residues with the greatest potential to add extra value to its circular economy that remains yet unexploited. Particularly, the high collagen content of fish skin allows generating gelatin by hydrolysis, which is ideal for forming hydrogels due to its biocompatibility and gelling capability. Hydrogels have been used as drug carriers for local administration due to their mechanical properties and drug loading capacity. Herein, novel tuna gelatin hydrogels were designed as drug vehicles with two structurally different antitumoral model compounds such as Doxorubicin and Crocin to be administrated locally in tissues with complex human anatomies after surgical resection. The characterization by gel permeation chromatography (GPC) of purified gelatin confirmed their heterogeneity composition, exhibiting three major bands that correspond to the β and α chains along with high molecular weight species. In addition, the Fourier Transform Infrared (FT-IR) spectra of gelatin probed the secondary structure of the gelatin showing the simultaneous existence of α helix, β sheet, and random coil structures. Morphological studies at different length scales were performed by a multi-technique approach using SAXS/WAXS, AFM and cryo-SEM that revealed the porous network formed by the interaction of gelatin planar aggregates. In addition, the sol-gel transition, as well as the gelation point and the hydrogel strength, were studied using dynamic rheology and differential scanning calorimetry. Likewise, the loading and release profiles followed by UV-visible spectroscopy indicated that the novel gelatin hydrogels improve the drug release of Doxorubicin and Crocin in a sustained fashion, indicating the structure-function importance in the material composition.

Decellularized Pig Kidney with a Micro-Nano Secondary Structure Contributes to Tumor Progression in 3D Tumor Model

In spite of many anti-cancer drugs utilized in clinical treatment, cancer is still one of the diseases with the highest morbidity and mortality worldwide, owing to the complexity and heterogeneity of the tumor microenvironment. Compared with conventional 2D tumor models, 3D scaffolds could provide structures and a microenvironment which stimulate native tumor tissues more accurately. The extracellular matrix (ECM) is the main component of the cell in the microenvironment that is mainly composed of three-dimensional nanofibers, which can form nanoscale fiber networks, while the decellularized extracellular matrix (dECM) has been widely applied to engineered scaffolds. In this study, pig kidney was used as the source material to prepare dECM scaffolds. A chemical crosslinking method was used to improve the mechanical properties and other physical characteristics of the decellularized pig kidney-derived scaffold. Furthermore, a human breast cancer cell line (MCF-7) was used to further investigate the biocompatibility of the scaffold to fabricate a tumor model. The results showed that the existence of nanostructures in the scaffold plays an important role in cell adhesion, proliferation, and differentiation. Therefore, the pig kidney-derived matrix scaffold prepared by decellularization could provide more cell attachment sites, which is conducive to cell adhesion and proliferation, physiological activities, and tumor model construction.

Photo-crosslinked hyaluronic acid hydrogel as a biomimic extracellular matrix to recapitulate in vivo features of breast cancer cells

2D cell culture is widely utilized to develop anti-cancer drugs and to explore the mechanisms of cancer tumorigenesis and development. However, the findings obtained from 2D culture often fail to provide guidance for clinical tumor treatments since it cannot precisely replicate the features of real tumors. 3D tumor models capable of recapitulating native tumor microenvironments have been proved to be a promising alternative technique. Herein, we constructed a breast tumor model from novel hyaluronic acid (HA) hydrogel which was prepared through photocrosslinking of methacrylated HA. The hydrogel was used as a biomimetic extracellular matrix to incubate MCF-7 cells. It was found that methacrylation degree had great effects on hydrogel's microstructure, mechanical performances, and liquid-absorbing and degradation abilities. Optimized hydrogel exhibited highly porous morphology, high equilibrium swelling ratio, suitable mechanical properties, and hyaluronidase-responsive degradation behavior. The results demonstrated that the HA hydrogel facilitated MCF-7 cell proliferation and growth in an aggregation manner. Furthermore, 3D-cultured MCF-7 cells not only up-regulated the expression of VEGF, bFGF and interleukin-8 but exhibited greater invasion and tumorigenesis capabilities compared with 2D-cultured cells. Therefore, the HA hydrogel is a reliable substitute for tumor model construction.

Heterogeneous microenvironmental stiffness regulates pro-metastatic functions of breast cancer cells

Besides molecular and phenotypic variations observed in cancer cells, intratumoral heterogeneity also occurs in the tumor microenvironment. Correlative stiffness maps of different intratumor locations in breast tumor biopsies show that stiffness increases from core to periphery. However, how different local ECM stiffness regulates key functions of cancer cells in tumor progression remains unclear. Although increased tissue stiffness is an established driver of breast cancer progression, conclusions from 2D cultures do not correspond with newer data from cancer cells in 3D environments. Many past studies of breast cancer in 3D culture fail to recapitulate the stiffness of a real breast tumor or the various local stiffnesses present in a tumor microenvironment. In this study, we developed a series of collagen/alginate hybrid hydrogels with adjustable stiffness to match the core, middle, and peripheral zones of a breast tumor. We used this hydrogel system to investigate effects of different local stiffness on morphology, proliferation, and migration of breast cancer cells. RNA sequencing of cells in hydrogels with different stiffness revealed changes in multiple cellular processes underlying cancer progression, including angiogenesis and metabolism. We discovered that tumor cells in a soft environment enriched YAP1 and AP1 signaling related genes, whereas tumor cells in a stiff environment became more pro-angiogenic by upregulating fibronectin 1 (FN1) and matrix metalloproteinase 9 (MMP9) expression. This systematic study defines how the range of environmental stiffnesses present in a breast tumor regulates cancer cells, providing new insights into tumorigenesis and disease progression at the tumor-stroma interface. STATEMENT OF SIGNIFICANCE: Applied a well-defined hybrid hydrogel system to mimic the tumor microenvironment with heterogeneous local stiffness. Breast cancer cells tended to proliferate in soft core environment while migrate in stiff peripheral environment. Breast cancer cells shift from glycolysis to OXPHOS and fatty acid metabolism responding to stiff matrix microenvironment. The transcriptomic profile of breast cancer cells altered due to microenvironmental stiffness changes.