Modulating layer-by-layer assembled sodium alginate-chitosan film properties through incorporation of cellulose nanocrystals with different surface charge densities

Carbon dots-loaded cellulose nanofibrils hydrogel incorporating Bi2O3/BiOCOOH for effective adsorption and photocatalytic degradation of lignin

A novel photocatalytic adsorbent, a cellulose nanofibrils based hydrogel incorporating carbon dots and Bi2O3/BiOCOOH (designated as CCHBi), was developed to address lignin pollution. CCHBi exhibited an adsorption capacity of 435.0 mg/g, 8.9 times greater than that of commercial activated carbon. This enhanced adsorption performance was attributed to the 3D porous structure constructed using cellulose nanofibrils (CNs), which increased the specific surface area and provided additional sorption sites. Adsorption and photocatalytic experiments showed that CCHBi had a photocatalytic degradation rate constant of 0.0140 min-1, 3.1 times higher than that of Bi2O3/BiOCOOH. The superior photocatalytic performance of CCHBi was due to the Z-scheme photocatalytic system constructed by carbon dots-loaded cellulose nanofibrils and Bi2O3/BiOCOOH, which facilitated the separation of photoinduced charge carriers. Additionally, the stability of CCHBi was confirmed through consecutive cycles of adsorption and photocatalysis, maintaining a removal efficiency of 85 % after ten cycles. The enhanced stability was due to the 3D porous structure constructed by CNs, which safeguarded the Bi2O3/BiOCOOH. This study validates the potential of CCHBi for high-performance lignin removal and promotes the application of CNs in developing new photocatalytic adsorbents.

Alginate-based active and intelligent packaging: Preparation, properties, and applications

Alginate-based packaging materials have emerged as promising alternatives to conventional petroleum-based plastics due to their biodegradability, renewability, and versatile functionalities. This review provides a comprehensive analysis of the recent advances in the development and application of alginate-based films and coatings for food packaging. The composition and fabrication methods of alginate-based packaging materials are discussed, highlighting the incorporation of various functional compounds to enhance their physicochemical properties. The mechanisms of action and the factors influencing the release and migration of active compounds from the alginate matrix are explored. The application of alginate-based packaging materials for the preservation of various food products, including meat, fish, dairy, fruits, and vegetables, is reviewed, demonstrating their effectiveness in extending shelf-life and maintaining quality. The development of alginate-based pH-sensitive indicators for intelligent food packaging is also discussed, focusing on the colorimetric response of natural pigments to spoilage-related pH changes. Furthermore, the review highlights the challenges and future perspectives of alginate-based packaging materials, emphasizing the need for novel strategies to improve their performance, sustainability, and industrial adoption.

Nanocellulose-assisted mechanically tough hydrogel platforms for sustained drug delivery

The controlled delivery of the desired bioactive molecules is required to achieve the maximum therapeutic effects with minimum side effects. Biopolymer-based hydrogels are ideal platforms for delivering the desired molecules owing to their superior biocompatibility, biodegradability, and low-immune response. However, the prolonged delivery of the drugs through biopolymer-based hydrogels is restricted due to their weak mechanical stability. We developed mechanically tough and biocompatible hydrogels to address these limitations using carboxymethyl chitosan, sodium alginate, and nanocellulose for sustained drug delivery. The hydrogels were cross-linked through calcium ions to enhance their mechanical strength. Nanocellulose-added hydrogels exhibited improved mechanical strength (Young's modulus; 23.36 → 30.7 kPa, Toughness; 1.39 → 5.65 MJm-3) than pure hydrogels. The composite hydrogels demonstrated increased recovery potential (66.9 → 84.5 %) due to the rapid reformation of damaged polymeric networks. The hydrogels were stable in an aqueous medium and demonstrated reduced swelling potential. The hydrogels have no adverse effects on embryonic murine fibroblast (3 T3), showing their biocompatibility. No bacterial growth was observed in hydrogels-treated groups, indicating their antibacterial characteristics. The sustained drug released was observed from nanocellulose-assisted hydrogel scaffolds compared to the pure polymer hydrogel scaffold. Thus, hydrogels have potential and could be used as a sustained drug carrier.

Development and characterization of starch/PVA antimicrobial active films with controlled release property by utilizing electrostatic interactions between nanocellulose and lauroyl arginate ethyl ester

The two nanocellulose (nanofibrillated cellulose (NFC) and carboxylated nanofibrillated cellulose (C-NFC)) could interact with lauryl arginine ethyl ester hydrochloride (LAE) through electrostatic bonding. The zeta potential (absolute value) of C-NFC (-27.80 mV) was higher than that of NFC (-10.07 mV). The starch/polyvinyl alcohol active films with controlled release property by utilizing electrostatic interactions between nanocellulose and LAE were prepared and their properties were investigated. For incorporation of the NFC or C-NFC, the cross-section of the films became slightly uneven and some fibrils were observed, the films exhibited an increase in strength, while the film water vapor and oxygen barrier properties decreased. The release of LAE from the films to food simulants (10 % ethanol) decelerated with increasing of NFC or C-NFC. These might be mainly attributed to the enhanced electrostatic interaction between NFC or C-NFC and LAE. It demonstrated that nanocellulose with higher negative charges would exhibit stronger electrostatic interaction with LAE, thus slowing the release of LAE. The film with highest C-NFC content exhibited smallest inhibition zone among LAE-containing films, which was related with its slowest release rate of LAE. It showed a great prospect to develop controlled release active packaging films by utilizing electrostatic interactions between substances.

Physicochemical Characterization and Antioxidant Properties of Chitosan and Sodium Alginate Based Films Incorporated with Ficus Extract

Aqueous extract of fruit obtained from Ficus racemosa enriched with phenolic components was used for the first time to fabricate chitosan (CS) and sodium alginate (SA)-based edible films. The edible films supplemented with Ficus fruit aqueous extract (FFE) were characterized physiochemically (using Fourier transform infrared spectroscopy (FT-IR), Texture analyser (TA), Thermogravimetric analysis (TGA), scanning electron microscopy (SEM), X-ray diffraction (XRD), and colourimeter) and biologically (using antioxidant assays). CS-SA-FFA films showed high thermal stability and high antioxidant properties. The addition of FFA into CS-SA film decreased transparency, crystallinity, tensile strength (TS), and water vapour permeability (WVP) but ameliorate moisture content (MC), elongation at break (EAB) and film thickness. The overall increase in thermal stability and antioxidant property of CS-SA-FFA films demonstrated that FFA could be alternatively used as a potent natural plant-based extract for the development of food packaging material with improved physicochemical and antioxidant properties.

A recognition strategy combining effective boron affinity technology and surface imprinting to prepare highly selective and easily recyclable polymer membrane for separation of drug molecule

Cellulose acetate membrane (CAM) has become one of the most widely used membrane materials by virtue of stability and hydrophilicity. In this work, to achieve the aim of selective recognition and separation of drug molecule shikimic acid (SA), an effective recognition tactics was proposed by combining boron affinity technology with surface imprinting strategy based on cellulose acetate membrane with low price and biocompatibility. The supporting CAM material was prepared through the phase inversion technique by continuous adjustment of different factors including solvent type and kinds of pore-forming agents, and the optimal CAM with multistage structure and highly porosity was applied for the imprinting of SA. Then the imprinted polymer membrane (MIPs-CAM) was developed via boron affinity surface imprinting polymerization. Various methods (FT-IR, UV-vis, SEM, XPS, AFM and TGA) were used to characterize the structure, morphology, elemental composition, surface roughness and thermal property of the obtained membrane. The as-prepared MIPs-CAM showed homogeneous and abundant imprinted layer, good thermal stability. The batch adsorption results showed that the MIPs-CAM had fast adsorption kinetics, specific recognition ability, and the adsorption capacity could obtain 63.598 mg g^-1, which was two times higher than that of non-imprinted membrane (NIPs-CAM). The adsorption isotherms conformed to the Langmuir isotherm and the adsorption processes were spontaneous and endothermic. Additionally, the adsorption capacity of MIPs-CAM still reached 85% of the initial result after five cycles. The experimental results revealed that the molecularly imprinted membrane possessed the advantages of high selectivity and easy recovery compared with the traditional molecular imprinted polymers for SA separation. These results indicate that boron affinity MIPs-CAM with high performance will provide a promising platform for the separation and purification of other cis-diol drug molecules from environmental resources.

Multilayer photonic films based on interlocked chiral-nematic cellulose nanocrystals in starch/chitosan

In this study, a new approach to employ and control cellulose nanocrystal (CNC) chiral nematic structure as a biodegradable, intelligent material was investigated. Tuned CNC self-assembled films were interlocked between two layers of citric acid, cross-linked starch/chitosan (1:1) films through the solvent casting process. This method increased the mechanical properties of produced films and created a selective reflection band from UV to near-IR depending on the helical pitch of the chiral nematic CNC layer. The features of these intelligent films have potential for different applications, from UV protective packaging to biomedical uses. The water vapor permeability (WVP) of the produced films decreased considerably by adding a CNC layer into the cross-linked starch/chitosan structure. Also, the WVP was different for the different helical pitches of the CNC layer. The starch/chitosan (outer layer) also showed a remarkable antibacterial property against E. coli, P. fluorescens, S. Enteritidis, and S. aureus which could be useful for biomedical applications or antibacterial packaging.

Nanocomposites Assembled via Electrostatic Interactions between Cellulose Nanocrystals and a Cationic Polymer

On account of their high strength and stiffness and their renewable nature, cellulose nanocrystals (CNCs) are widely used as a reinforcing component in polymer nanocomposites. However, CNCs are prone to aggregation and this limits the attainable reinforcement. Here, we show that nanocomposites with a very high CNC content can be prepared by combining the cationic polymer poly[(2-(methacryloyloxy)ethyl) trimethylammonium chloride] (PMETAC) and negatively charged, carboxylated CNCs that are provided as a sodium salt (CNC-COONa). Free-standing films of the composites can be prepared by simple solvent casting from water. The appearance and polarized optical microscopy and electron microscopy images of these films suggest that CNC aggregation is absent, and this is supported by the very pronounced reinforcement observed. The incorporation of 33 wt % CNC-COONa into PMETAC allowed increasing the storage modulus of this already rather stiff, glassy amorphous matrix polymer from 1.5 ± 0.3 to 6.6 ± 0.1 GPa, while the maximum strength increased from 11 to 32 MPa. At this high CNC content, the reinforcement achieved in the PMETAC/CNC-COONa nanocomposite is much more pronounced than that observed for a reference nanocomposite made with unmodified CNCs (CNC-OH).

Photocross-Linked Antimicrobial Amino-Siloxane Elastomers

Mechanically robust bulk antimicrobial polymers are one way to address disease transmission via contaminated surfaces. Here, we demonstrate the visible light photo-oxidative cross-linking of amine-containing PDMS using a single-component, solvent-free system where amines have a dual role as antimicrobial functionalities and cross-linking sites. Rose Bengal, a xanthene dye used as a fluorescent stain, is thermally reacted with the polymer to give a solvent-free liquid siloxane that can generate reactive singlet oxygen upon aerobic green light irradiation, coupling the amine functionalities into imine cross-links. Photorheological experiments demonstrate that light intensity is the largest kinetic factor in the photo-oxidative curing of these polymers. Room temperature irradiation under an ambient atmosphere results in free-standing elastic materials with mechanical properties that depend on the amount of Rose Bengal present. An ultimate elongation strain of 117% and Young's modulus of 2.15 MPa were observed for the highest dye loading, with both mechanical properties found to be higher than those for the same solution-based dye amounts. We demonstrate that the solvent-free nature of the material can be exploited to generate 3D structures using low-temperature deposition as well as direct-write patterning and photolithography on glass substrates. The antimicrobial activity was investigated, with the cross-linked material demonstrating greater efficacy against E. coli (Gram negative) compared with MRSA (Gram positive) bacterial strains and inducing complete cell lysis of incubated CHO-K1 mammalian cells, demonstrating applicability as a mechanically robust single-component antimicrobial elastomer.