Development of a cellulose-based scaffold for sustained delivery of curcumin

Improving the physicochemical stability and release properties of curcumin using κ-carrageenan/scallop hydrolysates hydrogel beads

Scallop (Patinopecten yessoensis) male gonad hydrolysates (SMGHs)/κ-carrageenan (KC)/KCl beads with SMGHs:KC ratios (0:10-5:5) were investigated. SMGHs/KC/KCl-Cur bead (5:5) exhibited the most intact spherical morphology and highest Cur loading content of 0.063 mg/0.1 g bead, ascribing to a shortened T23 from 1607.9 to 966.4 ms, and red and blueshifts of OH, NH, amide I and II bands. The undetected fingerprint region within 7.82°-28.90° of SMGHs/KC/KCl-Cur beads indicated successful Cur entrapment. Moreover, SMGHs/KC/KCl-Cur beads exhibited shrinkage network backbones and larger void pores as SMGHs increased, with vessel percentage area, total number of junctions, total vessel length decreasing from 52.1, 1446.8, 57931.4 to 39.7, 530.5, 34458.4, and lacunarity increasing from 0.048 to 0.111, respectively. Furthermore, Cur showed approximately 50% release contents in colon phase and above 90% retention rate during 30 days of storage at 4 °C. These results suggested that SMGHs/KC/KCl-Cur beads exhibited sustained-release of Cur and promised stable Cur preservation.

Enhanced osteogenesis on proantocyanidin-loaded date palm endocarp cellulosic matrices: A novel sustainable approach for guided bone regeneration

Developing inexpensive, biocompatible natural scaffolds that can support the differentiation and proliferation of stem cells has been recently emphasized by the research community to faster obtain the FDA approvals for regenerative medicine. In this regard, plant-derived cellulose materials are a novel class of sustainable scaffolding materials with high potentials for bone tissue engineering (BTE). However, low bioactivity of the plant-derived cellulose scaffolds restricts cell proliferation and cell differentiation. This limitation can be addressed though surface-functionalization of cellulose scaffolds with natural antioxidant polyphenols, e.g., grape seed proanthocyanidin (PCA)-rich extract (GSPE). Despite the various merits of GSPE as a natural antioxidant, its impact on the proliferation and adhesion of osteoblast precursor cells, and on their osteogenic differentiation is an as-yet unknown issue. Here, we investigated the effects of GSPE surface functionalization on the physicochemical properties of decellularized date (Phoenix dactyliferous) fruit inner layer (endocarp) (DE) scaffold. In this regard, various physiochemical characteristics of the DE-GSPE scaffold such as hydrophilicity, surface roughness, mechanical stiffness, porosity, and swelling, and biodegradation behavior were compared with those of the DE scaffold. Additionally, the impact of the GSPE treatment of the DE scaffold on the osteogenic response of human mesenchymal stem cells (hMSCs) was thoroughly studied. For this purpose, cellular activities including cell adhesion, calcium deposition and mineralization, alkaline phosphatase (ALP) activity, and expression levels of bone-related genes were monitored. Taken together, the GSPE treatment enhanced the physicochemical and biological properties of the DE-GSPE scaffold, thereby raising its potentials as a promising candidate for guided bone regeneration.

Nanocellulose-gellan cross-linked scaffolds for vaginal delivery of fluconazole

The objective of this research is to formulate lyophilized fluconazole-loaded nanocellulose-gellan scaffolds cross-linked using trisodium trimetaphosphate as a vaginal drug delivery system. The effect of polymers (nanocellulose and gellan gum) and cross-linking agents on drug release and mucoadhesive strength were determined by approaching a two-factor three-level central composite experimental design. The optimal formulation of the fluconazole-loaded cross-linked rice or wheat nanocellulose-gellan based scaffolds comprised of the concentration of polymers (4.91 % w/v or 4.99 % w/v) and trisodium trimetaphosphate (16.43 % w/v or 15.83 % w/v), respectively. The infrared spectra confirmed the cross-linking of nanocellulose and gellan gum while the thermal graph revealed the higher thermal stability of cross-linked scaffolds. The diffractogram of the scaffolds unveiled their amorphous nature while the electron micrographs depict the porous nature of the fluconazole-loaded nanocellulose-gellan scaffolds. The phosphorylated cross-linked nanocellulose-gellan scaffolds represent more swelling (8-fold higher), porosity (>83 %), tensile strength (>34 MPa), and mucoadhesive strength (>1940 mN), and less enzymatic degradation rate over the non cross-linked scaffolds. The optimal batch of cross-linked nanocellulose-gellan scaffolds provided a sustained release of 99 % of fluconazole over 24 h with 1.19-fold higher ex-vivo vaginal permeation over the native scaffolds. In addition, the phosphorylated nanocellulose-gellan based scaffolds exhibit improved antifungal activity and non-cytotoxicity.

3D printing of cellulose nanocrystals based composites to build robust biomimetic scaffolds for bone tissue engineering

Cellulose nanocrystals (CNC) are drawing increasing attention in the fields of biomedicine and healthcare owing to their durability, biocompatibility, biodegradability and excellent mechanical properties. Herein, we fabricated using fused deposition modelling technology 3D composite scaffolds from polylactic acid (PLA) and CNC extracted from Ficus thonningii. Scanning electron microscopy revealed that the printed scaffolds exhibit interconnected pores with an estimated average pore size of approximately 400 µm. Incorporating 3% (w/w) of CNC into the composite improved PLA mechanical properties (Young's modulus increased by ~ 30%) and wettability (water contact angle decreased by ~ 17%). The mineralization process of printed scaffolds using simulated body fluid was validated and nucleation of hydroxyapatite confirmed. Additionally, cytocompatibility tests revealed that PLA and CNC-based PLA scaffolds are non-toxic and compatible with bone cells. Our design, based on rapid 3D printing of PLA/CNC composites, combines the ability to control the architecture and provide improved mechanical and biological properties of the scaffolds, which opens perspectives for applications in bone tissue engineering and in regenerative medicine.

Hyaluronic Acid Micelles for Promoting the Skin Permeation and Deposition of Curcumin

Background

The poor skin permeation and deposition of topical therapeutic drugs is a major issue in topical drug delivery, improving this issue is conducive to improving the topical therapeutic effect of drugs.

Methods

In this study, octadecylamine modified hyaluronic acid (OHA) copolymer was synthesized by amide reaction technique to prepare curcumin (CUR)-loaded micelles (CUR-M) for topical transdermal administration. CUR-M was successfully prepared by dialysis, and the formulation was evaluated for particle size, zeta potential, surface morphology, entrapment effciency (EE%), drug loading (DL), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and the in vitro drug release. Additionally, in vitro skin permeation and retention, in vivo topical analgesic and anti-inflammatory activity, and skin irritation were assessed.

Results

The mean drug loading (DL), drug entrapment efficiency (EE), hydrodynamic diameter and zeta potential of CUR-M were 8.26%, 90.86%, 165.64 nm and −26.85 mV, respectively. CUR-M was characterized by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR), it was found that there was an interaction between CUR and OHA, and CUR existed in CUR-M in an amorphous form. CUR-M exhibited sustained release in 48 h and good stability at 4 °C for 21days. CUR-M could significantly increase the skin penetration and retention of CUR and had better analgesic and anti-inflammatory activities in vivo when compared with CUR solution. Hematoxylin-eosin staining results revealed that the transdermal penetration mechanism of CUR-M might be related to the hydration of stratum corneum by HA. In addition, CUR-M showed no skin irritation to mouse skin.

Conclusion

CUR-M might be a promising and safe drug delivery system for the treatment of topical diseases.

Smart active-targeting of lipid-polymer hybrid nanoparticles for therapeutic applications: Recent advances and challenges

The advances in producing multifunctional lipid-polymer hybrid nanoparticles (LPHNs) by combining the biomimetic behavior of liposomes and architectural advantages of polymers have provided great opportunities for selective and efficient therapeutics delivery. The constructed LPHNs exhibit different therapeutic efficacies for special uses based on characteristics of different excipients. However, the high mechanical/structural stability of hybrid nano-systems could be viewed as both a negative property and a positive feature, where the concomitant release of drug molecules in a controllable manner is required. In addition, difficulties in scaling up the LPHNs production, due to involvement of several criteria, limit their application for biomedical fields, especially in monitoring, bioimaging, and drug delivery. To address these challenges bio-modifications have exhibited enormous potential to prepare reproducible LPHNs for site-specific therapeutics delivery, diagnostic and preventative applications. The ever-growing surface bio-functionality has provided continuous vitality to this biotechnology and has also posed desirable biosafety to nanoparticles (NPs). As a proof-of-concept, this manuscript provides a crucial review of coated lipid and polymer NPs displaying excellent surface functionality and architectural advantages. We also provide a description of structural classifications and production methodologies, as well as the biomedical possibilities and translational obstacles in the development of surface modified nanocarrier technology.

Microorganism-derived biological macromolecules for tissue engineering

According to literature, certain microorganism productions mediate biological effects. However, their beneficial characteristics remain unclear. Nowadays, scientists concentrate on obtaining natural materials from live creatures as new sources to produce innovative smart biomaterials for increasing tissue reconstruction in tissue engineering and regenerative medicine. The present review aims to introduce microorganism-derived biological macromolecules, such as pullulan, alginate, dextran, curdlan, and hyaluronic acid, and their available sources for tissue engineering. Growing evidence indicates that these materials can be used as biological material in scaffolds to enhance regeneration in damaged tissues and contribute to cosmetic and dermatological applications. These natural-based materials are attractive in pharmaceutical, regenerative medicine, and biomedical applications. This study provides a detailed overview of natural-based biomaterials, their chemical and physical properties, and new directions for future research and therapeutic applications.

The latest achievements in plant cellulose-based biomaterials for tissue engineering focusing on skin repair

The present work reviews recent developments in plant cellulose-based biomaterial design and applications, properties, characterizations, and synthesis for skin tissue engineering and wound healing. Cellulose-based biomaterials are promising materials for their remarkable adaptability with three-dimensional polymeric structure. They are capable of mimicking tissue properties, which plays a key role in tissue engineering. Besides, concerns for environmental issues have motivated scientists to move toward eco-friendly materials and natural polymer-based materials for applications in the tissue engineering field these days. Therefore, cellulose as an appropriate substitute for common polymers based on crude coal, animal, and human-derived biomolecules is greatly considered for various applications in biomedical fields. Generally, natural biomaterials lack good mechanical properties for skin tissue engineering. But using modified cellulose-based biopolymers tackles these restrictions and prevents immunogenic responses. Moreover, tissue engineering is a quick promoting field focusing on the generation of novel biomaterials with modified characteristics to improve scaffold function through physical, biochemical, and chemical tailoring. Also, nanocellulose with a broad range of applications, particularly in tissue engineering, advanced wound dressing, and as a material for coupling with drugs and sensorics, has been reviewed here. Moreover, the potential cytotoxicity and immunogenicity of cellulose-based biomaterials are addressed in this review.