Quaternary ammonium N,N,N-trimethyl chitosan derivative and povidone‑iodine complex as a potent antiseptic with enhanced wound healing property

Oral ulcer treatment using human tonsil-derived mesenchymal stem cells encapsulated in trimethyl chitosan hydrogel: an animal model study

BACKGROUND

Oral ulcers are a common side effect of chemotherapy and affect patients' quality of life. While stem cell transplantation is a potential treatment for oral ulcers, its efficacy is limited as the stem cells tend to remain in the affected area for a short time. This study aims to develop a treatment for oral ulcers by using trimethyl chitosan (TMC) hydrogel with human tonsil-derived stem cells (hTMSCs) to increase the therapeutic effect of stem cells and investigate their effectiveness.

METHODS

Animals were divided into four experimental groups: Control, TMC hydrogel, hTMSCs, and hTMSCs loaded in TMC hydrogel (Hydrogel + hTMSCs) (each n = 8). Oral ulcers were chemically induced by anesthetizing the rats followed by injection of dilute acetic acid in the right buccal mucosa. After confirming the presence of oral ulcers in the animals, a single subcutaneous injection of 100 µL of each treatment was applied to the ulcer area. Histological analyses were performed to measure inflammatory cells, oral mucosal thickness, and fibrosis levels. The expression level of inflammatory cytokines was also measured using RT-PCR to gauge therapeutic the effect.

RESULTS

The ulcer size was significantly reduced in the TMC hydrogel + hTMSCs group compared to the control group. The stem cells in the tissue were only observed until Day 3 in the hTMSCs treated group, while the injected stem cells in the TMC Hydrogel + hTMSCs group were still present until day 7. Cytokine analysis related to the inflammatory response in the tissue confirmed that the TMC Hydrogel + hTMSCs treated group demonstrated superior wound healing compared to other experimental groups.

CONCLUSION

This study has shown that the adhesion and viability of current stem cell therapies can be resolved by utilizing a hydrogel prepared with TMC and combining it with hTMSCs. The combined treatment can promote rapid healing of oral cavity wounds by enhancing anti-inflammatory effects and expediting wound healing. Therefore, hTMSC loaded in TMC hydrogel was the most effective wound-healing approach among all four treatment groups prolonging stem cell survival. However, further research is necessary to minimize the initial inflammatory response of biomaterials and assess the safety and long-term effects for potential clinical applications.

Fabrication of diosmin loaded food-grade bilayer nanoparticles with modified chitosan and soy peptides and antioxidant properties examination

Diosmin is a flavonoid derived from plants, possessing anti-inflammatory, antioxidant, antidiabetic, neuroprotective and cardiovascular protective properties. However, diosmin has low solubility in water, leading to low bioavailability. In this study, we constructed bilayer nanoparticles with trimethyl chitosan and soy peptides to improve the oral bioaccessibility and bioavailability of diosmin, and determined the characteristics and antioxidant properties of the diosmin-loaded nanoparticles. The results showed that the size of the nanoparticles was around 250 nm with the encapsulation efficiency higher than 97 %, and the nanoparticles were stable under regular conditions. In vitro digestion suggested the nanoparticles could protect diosmin from releasing in gastric digestion but promote the bioaccessibility of diosmin in intestine. Furthermore, the diosmin-loaded nanoparticles presented excellent antioxidant activities in vitro and significantly decreased the Lipopolysaccharides-induced brain Malondialdehyde (MDA) level by oral administration. Therefore, the reported nanoparticles may be an effective platform for improving the oral bioavailability of diosmin.

Chitosan‑iodine complexes: Preparation, characterization, and antibacterial activity

Bacterial infections have always been a major threat to public health, and the development of effective antibacterial substances from natural polymers is crucial. 2-Aminoisonicotinic acid (AN) was grafted onto chitosan by 1-ethyl-(3-dimethylaminopropyl)carbodiimide-mediated coupling reactions, and then modified chitosan‑iodine (CSAN-I) complexes were prepared by solvent-assisted grinding. The samples were characterized using ultraviolet-visible spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, proton nuclear magnetic resonance spectroscopy, and X-ray diffraction, confirming that CSAN-I complexes had been successfully prepared. Thermogravimetric (TG) analysis indicated that the chemical modification of chitosan and iodine complexation reduced the thermal stability; X-ray photoelectron spectroscopy (XPS) analysis revealed that 81 % of the iodine in CSAN-I complex was in the form of triiodide ions. The iodine contents of three CSAN-I complexes (CSAN-I-1, CSAN-I-2 and CSAN-I-3) were 1.59 ± 0.22 %, 3.18 ± 0.26 %, and 5.56 ± 0.41 %, respectively. The antibacterial effects were evaluated in vitro, and the results indicated that CSAN-I complexes had strong antibacterial activities against both E. coli and S. aureus. In particular, CSAN-I-3 exhibited the best antibacterial effect. In addition, CSAN-I-3 was nontoxic to L929 cells with good cytocompatibility. Therefore, CSAN-I complexes can be considered as promising candidates for wound management in clinical applications.

Antiseptic, Hemostatic, and Wound Activity of Poly(vinylpyrrolidone)-Iodine Gel with Trimethyl Chitosan

Wound management practices have made significant advancements, yet the search for improved antiseptics persists. In our pursuit of solutions that not only prevent infections but also address broader aspects of wound care, we investigated the impact of integrating trimethyl chitosan (TMC) into a widely used poly(vinylpyrrolidone)-iodine gel (PVP-I gel). Our study assessed the antimicrobial efficacy of the PVP gel with TMC against Escherichia coli, Staphylococcus aureus, multidrug-resistant S. aureus MRSA, and Candida albicans. Additionally, we compared hemostatic effects using a liver puncture bleeding model and evaluated wound healing through histological sections from full-thickness dermal wounds in rats. The results indicate that incorporating TMC into the commercially available PVP-I gel did not compromise its antimicrobial activity. The incorporation of TMC into the PVP-I gel markedly improves its hemostatic activity. The regular application of the PVP-I gel with TMC resulted in an increased blood vessel count in the wound bed and facilitated the development of thicker fibrous tissue with a regenerated epidermal layer. These findings suggest that TMC contributes not only to antimicrobial activity but also to the intricate processes of tissue regeneration. In conclusion, incorporating TMC proves beneficial, making it a valuable additive to commercially available antiseptic agents.

Biodegradable trimethyl chitosan nanofiber mats by electrospinning as bioabsorbable dressings for wound closure and healing

The paper aimed to prepare quaternary chitosan-based nanofibers as bioabsorbable wound dressings. To this aim, fully biodegradable chitosan/N,N,N-trimethyl chitosan (TMC) nanofibers were designed and prepared via electrospinning, using poly(ethylene glycol) as sacrificial additive. The new biomaterials were structurally and morphologically characterized by FTIR and NMR spectroscopy, thermogravimetric analysis, X-ray diffraction and scanning electron microscopy, and their properties required for wound dressings application were investigated and discussed in detail. Thus, the nanofiber behavior was investigated by swelling, dynamic vapor sorption, and in vitro biodegradation in media mimicking the wound exudate. The mechanical properties were analysed from the stress-strain curves, the bioadhesivity from the texture analysis and the mucoadhesivity from the Zeta potential and transmittance measurements. The antimicrobial activity was assessed against S. aureus and E. coli strains, and the biocompatibility was tested in vitro on normal human dermal fibroblasts, and in vivo on rats. The application of the fiber mats with the best balance of properties as dressings on deep burn wound models in rats showed wound closure and active healing, with fully restoration of epithelia. It was concluded that the combination of chitosan with TMC into nanofibers provides new potential bioabsorbable wound dressing, opening new perspectives in regenerative medicine.

Innovative Functional Biomaterials as Therapeutic Wound Dressings for Chronic Diabetic Foot Ulcers

The imbalance of local and systemic factors in individuals with diabetes mellitus (DM) delays, or even interrupts, the highly complex and dynamic process of wound healing, leading to diabetic foot ulceration (DFU) in 15 to 25% of cases. DFU is the leading cause of non-traumatic amputations worldwide, posing a huge threat to the well-being of individuals with DM and the healthcare system. Moreover, despite all the latest efforts, the efficient management of DFUs still remains a clinical challenge, with limited success rates in treating severe infections. Biomaterial-based wound dressings have emerged as a therapeutic strategy with rising potential to handle the tricky macro and micro wound environments of individuals with DM. Indeed, biomaterials have long been related to unique versatility, biocompatibility, biodegradability, hydrophilicity, and wound healing properties, features that make them ideal candidates for therapeutic applications. Furthermore, biomaterials may be used as a local depot of biomolecules with anti-inflammatory, pro-angiogenic, and antimicrobial properties, further promoting adequate wound healing. Accordingly, this review aims to unravel the multiple functional properties of biomaterials as promising wound dressings for chronic wound healing, and to examine how these are currently being evaluated in research and clinical settings as cutting-edge wound dressings for DFU management.

Natural Compounds and Biopolymers-Based Hydrogels Join Forces to Promote Wound Healing

Rapid and complete wound healing is a clinical emergency, mainly in pathological conditions such as Type 2 Diabetes mellitus. Many therapeutic tools are not resolutive, and the research for a more efficient remedial remains a challenge. Wound dressings play an essential role in diabetic wound healing. In particular, biocompatible hydrogels represent the most attractive wound dressings due to their ability to retain moisture as well as ability to act as a barrier against bacteria. In the last years, different functionalized hydrogels have been proposed as wound dressing materials, showing encouraging outcomes with great benefits in the healing of the diabetic wounds. Specifically, because of their excellent biocompatibility and biodegradability, natural bioactive compounds, as well as biomacromolecules such as polysaccharides and protein, are usually employed in the biomedical field. In this review, readers can find the main discoveries regarding the employment of naturally occurring compounds and biopolymers as wound healing promoters with antibacterial activity. The emerging approaches and engineered devices for effective wound care in diabetic patients are reported and deeply investigated.

Progress in Research of Chitosan Chemical Modification Technologies and Their Applications

Chitosan, which is derived from chitin, is the only known natural alkaline cationic polymer. Chitosan is a biological material that can significantly improve the living standard of the country. It has excellent properties such as good biodegradability, biocompatibility, and cell affinity, and has excellent biological activities such as antibacterial, antioxidant, and hemostasis. In recent years, the demand has increased significantly in many fields and has huge application potential. Due to the poor water solubility of chitosan, its wide application is limited. However, chemical modification of the chitosan matrix structure can improve its solubility and biological activity, thereby expanding its application range. The review covers the period from 1996 to 2022 and was elaborated by searching Google Scholar, PubMed, Elsevier, ACS publications, MDPI, Web of Science, Springer, and other databases. The various chemical modification methods of chitosan and its main activities and application research progress were reviewed. In general, the modification of chitosan and the application of its derivatives have had great progress, such as various reactions, optimization of conditions, new synthetic routes, and synthesis of various novel multifunctional chitosan derivatives. The chemical properties of modified chitosan are usually better than those of unmodified chitosan, so chitosan derivatives have been widely used and have more promising prospects. This paper aims to explore the latest progress in chitosan chemical modification technologies and analyze the application of chitosan and its derivatives in various fields, including pharmaceuticals and textiles, thus providing a basis for further development and utilization of chitosan.

Facile formation of injectable quaternized chitosan/tannic acid hydrogels with antibacterial and ROS scavenging capabilities for diabetic wound healing

The wound healing process of the diabetic wound is often hindered by excessive oxygen free radicals and infection. An ideal wound dressing should possess great reactive oxygen species (ROS) scavenging property and considerable antibacterial ability. In this study, we facilely constructed a novel hydrogel dressing with excellent ROS scavenging property and outstanding antibacterial performance by introducing tannic acid (TA) into quaternized chitosan (QCS) matrix. Attributing to the suitable physical crosslinking between TA and QCS, this QCS/TA hydrogel was endowed with injectable and self-healing properties, which could avoid the various external squeezing on the irregular shape by wound dressing. The results showed that it could promote coagulation, suppress inflammation and expedite collagen deposition in the skin defect model of diabetic rats. This study provides a facile and convenient method for constructing injectable hydrogel dressing, which has application potentials in the clinical management of diabetic wounds.

Optimized preparation and performance evaluation of a bifunctional chitosan-modified flocculant

In view of the diversification of pollutants in current sewage, further improving the application efficiency of water treatment agents and realizing multi-functionalization are important directions for the research of water treatment agents.

Self-Assembly of Soluble Chitosan Derivatives Nanoparticles for Vaccine: Synthesis, Characterization and Evaluation

Herein, a novel chitosan derivative nanoparticle was proposed to function as a delivery carrier. First of all, an improvement was made to the way N-2-hydroxypropyl trimcthyl ammonium chloride chitosan (N-2-HACC) was synthesized. Moreover, the solution to one-step synthesis of N-2-HACC from chitosan (CS) was developed. Different from the previous report, the synthesis process was simplified, and there was a reduction in the amount of 2,3-epoxypropyl trimethyl ammonium chloride (EPTAC) used. With its excellent water solubility maintained, the relatively low degree of substitution was controlled to facilitate the cross-linking reaction. The results obtained from 1H-NMR, FTIR spectroscopy, and XRD indicated a smooth EPTAC onto CS for the formation of N-2-HACC with 59.33% the degree of substitution (DS). According to our results, N-2-HACC could be dissolved in various organic solvents, deionized water, 1% acetic acid aqueous solution, and others at room temperature. Finally, a novel chitosan nanoparticle material was prepared using the self-assembly method with β-glycerophosphate sodium (β-GC), with excellent immune properties achieved, thus providing a new strategy for chitosan self-assembled nanoparticles.