Structural and digestion properties of potato starch modified using an efficient starch branching enzyme AqGBE

New Derivatives of Modified Starch for Food Technology

The food industry extensively uses chemically modified starches and their hydrolysates, which is mainly due to their emulsification ability. Therefore, it becomes inevitable to develop new starch derivatives, including modified starch hydrolysates, and effective preparation methods to meet the increasing demands of producers, consumers, and technology. This study comprehensively researches the physical, chemical, and functional properties (such as the water-binding capacity, swelling power, solubility, and fat absorption capacity) of chemically modified biopolymers and their enzymatic hydrolysis products. We utilized oxidized and acetylated potato and waxy-corn starches with varying degrees of substitution by carboxyl and acetyl groups in our research. The process of enzymatic hydrolysis was performed in a recirculated membrane reactor (CRMR). Our findings indicated that the physicochemical properties of starch derivatives and their hydrolysates depended on the biological origin of the biopolymer and the type and degree of modification. However, the presence of carboxyl groups in the modified starch molecules is critical and affects the rheological properties and water-binding capacity of the starch preparations. For example, in the case of waxy-corn starch preparations with a lower content of carboxyl groups (i.e., derivatives with a low degree of oxidation), the water-binding capacity (WBC) increases when compared to native starch. The highest WBC value of 206.3% was noted for the doubly modified waxy-corn starch with an oxidation degree of 0.2% and an acetylation degree of 2.5%, while native waxy-corn starch shows a WBC of 161.4%. In contrast, it was observed that preparations with a higher content of carboxyl groups, i.e., derivatives with an oxidation degree of 2.5%, show a lower swelling power compared to native waxy starch.

Enzymatic modification lowers syneresis in corn starch gels during freeze-thaw cycles through 1,4-α-glucan branching enzyme

The current research in the food industry regarding enzymatic modification to enhance the freeze-thaw (FT) stability of starch is limited. The present study aimed to investigate the FT stability of normal corn starch (NCS) modified using 1,4-α-glucan branching enzyme (GBE) derived from Geobacillus thermoglucosidans STB02. Comprehensive analyses, including syneresis, scanning electron microscopy, and low-field nuclear magnetic resonance, collectively demonstrated the enhanced FT stability of GBE-modified corn starch (GT-NCS-30) in comparison to its native form. Its syneresis was 66.4 % lower than that of NCS after three FT cycles. Notably, GBE treatment induced changes in the pasting properties and thermal resistance of corn starch, while simultaneously enhancing the mechanical strength of the starch gel. Moreover, X-ray diffractograms and microstructural assessments of freeze-thawed gels indicated that GBE treatment effectively hindered the association of corn starch molecules, particularly amylose retrogradation. The enhanced FT stability of GBE-modified starch can be attributed to alterations in the starch structure induced by GBE. This investigation establishes a foundation for further exploration into the influence of GBE treatment on the FT stability of starch and provides a theoretical basis for further research in this area.

Physicochemical properties and in vitro digestibility of ginseng starches under citric acid-autoclaving treatment

In this study, the effects of citric acid-autoclaving (CA-A) treatment on physicochemical and digestive properties of the native ginseng starches were investigated. The results showed that ginseng starch exhibited a B-type crystal structure with a low onset pasting temperature of 44.23 ± 0.80 °C, but high peak viscosity and setback viscosity of 5897.34 ± 53.72 cP and 692.00 ± 32.36 cP, respectively. The granular morphology, crystal and short-range ordered structure of ginseng starches were destroyed after CA-A treatment. The more short-chain starches were produced, resulting in the ginseng starches solubility increased. In addition, autoclaving, citric acid (CA) and CA-A treatment promoted polymerization and recrystallization of starch molecules, increased the proportion of amylopectin B1, and B3 chains, and improved molecular weight and resistant starch (RS) content of ginseng starches. The most significant multi-scale structural change was induced by CA-A treatment, which reduced the relative crystallinity of ginseng starch from 28.26 ± 0.24 % to 2.75 ± 0.08 %, and increased the content of RS to 54.30 ± 0.14 %. These findings provided a better understanding of the structure and properties of Chinese ginseng starches and offered new ideas for the deep processing of ginseng foods.

Impact of starch chain length distributions on physicochemical properties and digestibility of starches

Changing starch structure at different levels is a promising approach to promote desirable metabolic responses. Chain length distribution (CLD) is among the starch structural characteristics having a potential to determine properties of starch-based products. Therefore, the objective of the current review is to summarize recent findings on CLD and its impact on physicochemical properties and digestion. Investigations undertaken to enhance understanding of starch structure have shown clearly that CLD is a significant determining factor in modulating starch digestibility. Enzymatic modifications and processing treatments alter the CLD of starch, which in turn affects the rate of digestion, but the underlying molecular mechanisms have yet to be fully elucidated. Even though advances have been made in manipulating CLD using different methods and to correlate the changes with various functional properties, in general the area needs further investigations to open new awareness for enhancing healthiness of starchy foods.

A Comparative Study of Resistant Dextrins and Resistant Maltodextrins from Different Tuber Crop Starches

The anti-digestibility of resistant dextrin (RD) and resistant maltodextrin (RMD) is usually significantly affected by processing techniques, reaction conditions, and starch sources. The objective of this investigation is to elucidate the similarities and differences in the anti-digestive properties of RD and RMD prepared from three different tuber crop starches, namely, potato, cassava, and sweet potato, and to reveal the associated mechanisms. The results show that all RMDs have a microstructure characterized by irregular fragmentation and porous surfaces, no longer maintaining the original crystalline structure of starches. Conversely, RDs preserve the structural morphology of starches, featuring rough surfaces and similar crystalline structures. RDs exhibite hydrolysis rates of approximately 40%, whereas RMDs displaye rates lower than 8%. This disparity can be attributed to the reduction of α-1,4 and α-1,6 bonds and the development of a highly branched spatial structure in RMDs. The indigestible components of the three types of RDs range from 34% to 37%, whereas RMDs vary from 80% to 85%, with potato resistant maltodextrin displaying the highest content (84.96%, p < 0.05). In conclusion, there are significant differences in the processing performances between different tuber crop starches. For the preparation of RMDs, potato starch seems to be superior to sweet potato and cassava starches. These attributes lay the foundation for considering RDs and RMDs as suitable components for liquid beverages, solid dietary fiber supplements, and low glycemic index (low-GI) products.

Effect of modification by maltogenic amylase and branching enzyme on the structural and physicochemical properties of sweet potato starch

Sweet potato starch (SPSt) was treated sequentially with the combination of maltogenic amylase (MA) and branching enzyme (BE) (MA → BE) or BE and MA (BE→MA) to modify its structural and physicochemical properties. Following the MA → BE and BE→MA modifications, the degree of branching was increased from 12.02 % to 44.06 %; whereas, the average chain length decreased from 18.02 to 12.32. Fourier-transform infrared spectroscopy and digestive performance analysis indicated that the modifications reduced hydrogen bonds and increased resistant starch in SPSt. Rheological analysis revealed that the storage and loss moduli of the modified samples were lower than those of the control samples, except for starch treated with MA alone. X-ray diffraction measurements suggested that the re-crystallisation peak intensities of the enzyme-modified starches were lower than those of the untreated sample. The retrogradation resistance ability of the analysed samples followed the order: BE→MA-starches > MA → BE-starches > untreated starch. The relationship between the crystallisation rate constant and short branched chains (DP_6-9) was well described by linear regression. This study provides a theoretical foundation for retarding the retrogradation of starch, which can improve food quality and extend the shelf-life of enzymatically modified starchy foods.

Biochemical characteristics and potential application of a thermostable starch branching enzyme from Bacillus licheniformis

Slowly digestible starch (SDS) has attracted increasing attention for its function of preventing metabolic diseases. Based on transglycosylation, starch branching enzymes (1,4-α-glucan branching enzymes, GBEs, EC 2.4.1.18) can be used to regulate the digestibility of starch. In this study, a GBE gene from Bacillus licheniformis (bl-GBE) was cloned, expressed, purified, and characterized. Sequence analysis and structural modeling showed that bl-GBE belong to the glycoside hydrolase 13 (GH13) family, with which its active site residues were conserved. The bl-GBE was highly active at 80 °C and a pH range of 7.5-9.0, and retained 90% of enzyme activity at 70 °C for 16 h. bl-GBE also showed high substrate specificity (80.88 U/mg) on potato starch. The stability and the changes of the secondary structure of bl-GBE at different temperature were determined by circular dichroism (CD) spectroscopy. The CD data showed a loss of 20% of the enzyme activity at high temperatures (80 °C), due to the decreased content of the α -helix in the secondary structure. Furthermore, potato starch treated with bl-GBE (300 U/g starch) showed remarkable increase in stability, solubility, and significant reduction viscosity. Meanwhile, the slowly digestible starch content of bl-GBE modified potato starch increased by 53.03% compared with native potato starch. Our results demonstrated the potential applications of thermophilic bl-GBE in food industries.

Butyl Group Distribution, Intestinal Digestion, and Colonic Fermentation Characteristics of Different Butyrylated Starches

Despite being a promising butyrate carrier, butyrylated starch remains poorly understood in terms of the correlation between starch structure and fermentation characteristics. Herein, three butyrylated starches derived from different botanical sources were prepared with a similar degree of substitution. Raman microscopy and water contact angle analysis suggested that a relatively large proportion of butyl group substitutions occurred within the interior of butyrylated waxy maize starch (B-WMS) granules. In vitro digestion results showed that branch points provided butyl groups with a specific protection from enzymatic hydrolysis, whereas butyl groups significantly increased the resistant starch content of butyrylated starch. Moreover, the porous morphology with less distributed butyl groups on the granular surface contributed to a faster fermentation rate in B-WMS. The current study reveals the influence of botanical origin on butyl group distribution, which in turn plays a pivotal role in regulating the intestinal digestion and colonic fermentation of butyrylated starch.

Properties and digestibility of a novel porous starch from lotus seed prepared via synergistic enzymatic treatment

The objective was to investigate the effect of synergistic enzymatic treatment on the properties and digestibility of a novel C-type lotus seed porous starch (LPS). Scanning electron microscopy showed that the densest and most complete pores were formed on the surface of LPS when the concentration of enzymes added was 1.5% (LS-1.5E). With increases in enzyme addition, the oil and water absorption of the porous starch increased and reached maxima at 1.5% of enzyme. Increased in the specific surface area, total pore volume and average pore diameter of LPS were determined by low-temperature nitrogen adsorption, while when the enzymes exceeded 1.5%, there were no significant changes. Compared to lotus seed starch (LS), the particle size of LPS also decreased. With the increases in enzyme addition, LPS exhibited higher relative crystallinity and ordering structure by XRD and FTIR. The results by SAXS confirmed that LPS had higher ordered semi-crystalline lamellar and denser lamellar structure compared to LS. Low-field ¹H NMR spectroscopy indicated that the proportion of bound water in LPS increased, while the proportion of bulk water decreased. Moreover, the degree of hydrolysis of LPS was lower than that of LS, and the content of rapidly digestible starch decreased, while the content of slowly digestible starch and resistant starch increased with the enzyme addition, which was consistent with the structural properties.