Temperature-resistant and solvent-tolerant lipases as industrial biocatalysts: Biotechnological approaches and applications

Artificial antibody-antigen-directed immobilization of lipase for consecutive catalytic synthesis of ester: Benzyl acetate case study

A strategy based on artificial antibody-antigen recognition was proposed for the specific directed immobilization of lipase. The artificial antibody was synthesized using catechol as a template, α-methacrylic acid as a functional monomer, and Fe3O4 as the matrix material. Lipase was modified with 3,4-dihydroxybenzaldehyde as an artificial antigen. The artificial antibody can specifically recognize catechol fragment in the enzyme structure to achieve the immobilization of lipase. The immobilization amount, yield, specific activity, and immobilized enzyme activity were 13.2 ± 0.2 mg/g, 78.9 ± 0.4 %, 7.9 ± 0.2 U/mgprotein, and 104.6 ± 1.7 U/gcarrier, respectively. Moreover, the immobilized lipase exhibited strong reusability and regeneration ability. Additionally, the immobilized lipase successfully catalyzed the synthesis of benzyl acetate and demonstrated robust continuous catalytic activity. These results fully demonstrate the feasibility of the proposed artificial antibody-antigen-directed immobilization of lipase.

Lipase-catalyzed solvent-free synthesis of monoglycerides from biodiesel-derived crude glycerol: Optimized using response surface methodology

The growth of the biodiesel industry has resulted in significant quantity of crude glycerol. It is necessary to explore the synthesis of high-value-added products from crude glycerol. In this study, the enzymatic synthesis of monoglycerides under solvent-free conditions, employing crude glycerol as the primary feedstock, had been investigated. The analysis showed that the highest yield of monoglycerides was obtained after 12 h, and Novozym 435 showed the highest monoglyceride yield of 18.41 % among the three lipases tested, followed by Lipozyme TL IM and Lipozyme RM IM. Monoglycerides were synthesized from biodiesel-derived crude glycerol using Novozym 435 as the catalyst under solvent-free conditions at different parameters, which were catalyst concentration, substrate molar ratio, and temperature. The yield of monoglycerides was examined in single-factor experiments. Response surface methodology (RSM) was subsequently employed to optimize the synthesis conditions based on the single-factor experimental results. The optimal conditions were at an enzyme concentration of 12.7 wt% and a molar ratio of crude glycerol:oil of 5.7:1 at a reaction temperature of 65.2 °C. The experimental yield of monoglycerides under the optimal conditions was 28.93 %, which is close to the value predicted from the RSM model (29.02 %).

Recent insight into the advances and prospects of microbial lipases and their potential applications in industry

Enzymes play a crucial role in various industrial sectors. These biocatalysts not only ensure sustainability and safety but also enhance process efficiency through their unique specificity. Lipases possess versatility as biocatalysts and find utilization in diverse bioconversion reactions. Presently, microbial lipases are gaining significant focus owing to the rapid progress in enzyme technology and their widespread implementation in multiple industrial procedures. This updated review presents new knowledge about various origins of microbial lipases, such as fungi, bacteria, and yeast. It highlights both the traditional and modern purification methods, including precipitation and chromatographic separation, the immunopurification technique, the reversed micellar system, the aqueous two-phase system (ATPS), and aqueous two-phase flotation (ATPF), moreover, delves into the diverse applications of microbial lipases across several industries, such as food, vitamin esters, textile, detergent, biodiesel, and bioremediation. Furthermore, the present research unveils the obstacles encountered in employing lipase, the patterns observed in lipase engineering, and the application of CRISPR/Cas genome editing technology for altering the genes responsible for lipase production. Additionally, the immobilization of microorganisms' lipases onto various carriers also contributes to enhancing the effectiveness and efficiencies of lipases in terms of their catalytic activities. This is achieved by boosting their resilience to heat and ionic conditions (such as inorganic solvents, high-level pH, and temperature). The process also facilitates the ease of recycling them and enables a more concentrated deposition of the enzyme onto the supporting material. Consequently, these characteristics have demonstrated their suitability for application as biocatalysts in diverse industries.

An archaeal nitrile hydratase from the halophilic archaeon A07HB70 exhibits high tolerance to 3-cyanopyridine and nicotinamide

Nitrile hydratase (NHase, EC 4.2.1.84) is widely used in the industrial production of biosynthetic amide compounds. NHases obtained from prokaryotic and eukaryotic sources have been widely studied, while the NHases derived from archaeal sources have not been reported. Here, we focused on a distinctive NHase derived from a halophilic archaeon (archaeon A07HB70, A.r NHase) that thrives in high-salt environments. A notable feature of this enzyme is the natural fusion of the α subunit with the activator. A.r NHase retained 89.14 % of its activity after exposure to 4.0 M substrate and 97.52 % of its activity after exposure to 4.0 M product. These findings indicate that A.r NHase exhibits significantly higher tolerance to both substrate and product compared to NHases derived from other sources, which may be due to its unique genetic structure. The investigation of such highly stable archaeal NHase can offer a theoretical foundation for modifying NHase derived from other sources. This, in turn, would enhance the potential industrial application of NHase.

Construction of molecular enrichment accelerators via assembly of enzyme surface grafted polymer and cyclodextrin achieving rapid and stable ester catalysis for biodiesel synthesis

Efficient and stable catalysis has always been the core concept of enzyme catalysis in industrial processes for manufacturing. Here, we constructed molecular enrichment accelerators to synergistically enhance enzyme activity and stability by assembling enzyme surface grafted polymer and cyclodextrin. At 40 °C, the enzyme activity of CalB-PNIPAM212/β-CD was 2.9 times that of CalB-PNIPAM212. The enzyme activity of CalB-PNIPAM428/γ-CD had reached 1.61 times that of CalB. At the same time, the stability of CalB-PNIPAM212/β-CD and CalB-PNIPAM428/γ-CD are slightly better than that of CalB under high temperature, organic solution and extreme pH conditions. The synergistic increase in activity and stability of the lipase-polymer assembly was achieved due to the structure of assembly, in which the role of cyclodextrin could enrich substrate affecting molecular diffusion. In addition, the lipase-polymer assembly proved to be an efficient catalyst for biodiesel synthesis, with a biodiesel conversion 1.4 times that of CalB at 60 °C. Therefore, this simple and low-cost lipase-polymer assembly provides new possibilities for the construction of high-efficiency industrial biocatalytic catalysts.

Potential of Antarctic lipase from Acinetobacter johnsonii Ant12 for treatment of lipid-rich wastewater: screening, production, properties and applications

The present study aimed to screen and optimize lipase production by the Antarctic strain Acinetobacter johnsonii Ant12 for lipid-rich wastewater treatment. Lipase production was successfully enhanced threefold through optimization of culture conditions. The optimum crude lipase activity was observed at 50 °C with high stability in a wide temperature range. The lipase also exhibited high activity and stability in the presence of solvents, metal ions, and surfactants. The crude lipase was used for the treatment of lipid-rich wastewater, which poses a significant challenge, as traditional removal methods are often inefficient or non-eco-friendly. In this study, bioaugmentation with Ant12 resulted in substantial lipid reduction in synthetic as well as real-world wastewater. Multiple linear regression analysis showed that lipid concentration and time were the most significant factors influencing lipid degradation. Bioaugmentation of real-world wastewater with Ant12 cells resulted in 84% removal of lipids in 72 h, while its crude lipase degraded 73.7% of lipids after 24 h. Thus, the specific rate of lipid degradation was higher for crude lipase (0.095/h) than the whole cell treatment (0.031/h). Economic analysis revealed that crude lipase production was much cheaper, faster and more eco-friendly than purified or partially purified lipase production, which justifies its use in wastewater treatment. The high activity of enzyme also implicates its application as a detergent additive. In our knowledge, it is the first study to establish A. johnsonii isolate from Antarctica for lipid-rich wastewater treatment.

A thermostable organic solvent-tolerant lipase from Brevibacillus sp.: production and integrated downstream processing using an alcohol-salt-based aqueous two-phase system

Lipases are used for the synthesis of different compounds in the chemical, pharmaceutical, and food industries. Most of the reactions are carried out in non-aqueous media and often at elevated temperature, requiring the use of organic solvent-tolerant thermostable lipases. However, most known lipases are not stable in the presence of organic solvents and at elevated temperature. In this study, an organic solvent-tolerant thermostable lipase was obtained from Brevibacillus sp. SHI-160, a moderate thermophile isolated from a hot spring in the East African Rift Valley. The enzyme was optimally active at 65°C and retained over 90% of its activity after 1 h of incubation at 70°C. High lipase activity was measured in the pH range of 6.5 to 9.0 with an optimum pH of 8.5. The enzyme was stable in the presence of both polar and non-polar organic solvents. The stability of the enzyme in the presence of polar organic solvents allowed the development of an efficient downstream processing using an alcohol-salt-based aqueous two-phase system (ATPS). Thus, in the presence of 2% salt, over 98% of the enzyme partitioned to the alcohol phase. The ATPS-recovered enzyme was directly immobilized on a solid support through adsorption and successfully used to catalyze a transesterification reaction between paranitrophenyl palmitate and short-chain alcohols in non-aqueous media. This shows the potential of lipase SHI-160 to catalyze reactions in non-aqueous media for the synthesis of valuable compounds. The integrated approach developed for enzyme production and cheap and efficient downstream processing using ATPS could allow a significant reduction in enzyme production costs. The results also show the potential of extreme environments in the East African Rift Valley as sources of valuable microbial genetic resources for the isolation of novel lipases and other industrially important enzymes.

Short Peptides for Hydrolase Supramolecular Mimicry and Their Potential Applications

Hydrolases are enzymes that have found numerous applications in various industrial sectors spanning from pharmaceuticals to foodstuff and beverages, consumers' products such as detergents and personal care, textiles, and even for biodiesel production and environmental bioremediation. Self-assembling and gelling short peptides have been designed for their mimicry so that their supramolecular organization leads to the creation of hydrophobic pockets for catalysis to occur. Catalytic gels of this kind can also find numerous industrial applications to address important global challenges of our time. This concise review focuses on the last 5 years of progress in this fast-paced, popular field of research with an eye towards the future.

Characterization of a New Thermostable and Organic Solution-Tolerant Lipase from Pseudomonas fluorescens and Its Application in the Enrichment of Polyunsaturated Fatty Acids

The search for and characterization of new lipases with excellent properties has always been urgent and is of great importance to meet industrial needs. In this study, a new lipase, lipB, from Pseudomonas fluorescens SBW25, belonging to the lipase subfamily I.3, was cloned and expressed in Bacillus subtilis WB800N. Enzymatic properties studies of recombinant LipB found that it exhibited the highest activity towards p-nitrophenyl caprylate at 40 °C and pH 8.0, retaining 73% of its original activity after incubation at 70 °C for 6 h. In addition, Ca²⁺, Mg²⁺, and Ba²⁺ strongly enhanced the activity of LipB, while Cu²⁺, Zn²⁺, Mn²⁺, and CTAB showed an inhibiting effect. The LipB also displayed noticeable tolerance to organic solvents, especially acetonitrile, isopropanol, acetone, and DMSO. Moreover, LipB was applied to the enrichment of polyunsaturated fatty acids from fish oil. After hydrolyzing for 24 h, it could increase the contents of polyunsaturated fatty acids from 43.16% to 72.18%, consisting of 5.75% eicosapentaenoic acid, 19.57% docosapentaenoic acid, and 46.86% docosahexaenoic acid, respectively. The properties of LipB render it great potential in industrial applications, especially in health food production.

Aggregation Interface and Rigid Spots Sustain the Stable Framework of a Thermophilic N-Demethylase

Enzymes from thermophilic microorganisms usually show high thermostability, which is of great potential in industrial application; to understand the structural logic of these enzymes is helpful for the construction of robust biocatalysts. In this study, based on the crystal structure of an N-demethylase─TrSOX─with outstanding thermostability from Thermomicrobium roseum, substitutions were introduced on the aggregation interface and rigid spots to reduce the aggregation ratio and the rigidity. Four substitutions on the aggregation interface─V162S, M308S, F170S, and V306S─considerably reduced the thermostability and slightly enhanced the catalytic efficiency. In addition, the thermostable framework was considerably disrupted in several multiple P → G substitutions in several local motifs (P129G/P134G, P237G/P259G, and P259G/P276G). These structural fluctuations were in good accordance with whole-structure or partial root-mean-square deviation, radius of gyration H-bonds, and solvent-accessible surface area values in molecular dynamics simulation. Furthermore, these key spots were introduced into an unstable homolog from Bacillus sp., resulting in a dramatical increase in the half-life at 60 °C from <10 to 1440 min. These results could help understand the natural stable framework of thermophilic enzymes, which could be references for the construction of robust enzymes in industrial applications.

An Appraisal on Prominent Industrial and Biotechnological Applications of Bacterial Lipases

Microbial lipases expedite the hydrolysis and synthesis of long-chain acyl esters. They are highly significant commercial biocatalysts to biotechnologists and organic chemists. The market size of lipase is anticipated to reach $590 million by 2023. This is all owing to their versatility in properties, including stability in organic solvents, interfacial activation in micro-aqueous environments, high substrate specificity, and activity in even non-aqueous milieu. Lipases are omnipresent and synthesized by various living organisms, including animals, plants, and microorganisms. Microbial lipases are the preferred choice for industrial applications as they entail low production costs, higher yield independent of seasonal changes, easier purification practices, and are capable of being genetically modified. Microbial lipases are employed in several common industries, namely various food manufactories (dairy, bakery, flavor, and aroma enhancement, etc.), leather tanneries, paper and pulp, textiles, detergents, cosmetics, pharmaceuticals, biodiesel synthesis, bioremediation and waste treatment, and many more. In recent decades, circumspection toward eco-friendly and sustainable energy has led scientists to develop industrial mechanisms with lesser waste/effluent generation, minimal overall energy usage, and biocatalysts that can be synthesized using renewable, low-cost, and unconventional raw materials. However, there are still issues regarding the commercial use of lipases which make industrialists wary and sometimes even switch back to chemical catalysis. Industrially relevant lipase properties must be further optimized, analyzed, and explored to ensure their continuous successful utilization. This review comprehensively describes the general background, structural characteristics, classifications, thermostability, and various roles of bacterial lipases in important industries.

Employing non-canonical amino acids towards the immobilization of a hyperthermophilic enzyme to increase protein stability

A carboxylesterase derived from Sulfolobus solfataricus P1 was immobilized onto an epoxy-activated Sepharose resin via non-canonical amino acids. The immobilized enzyme exhibited heightened performance in organic solvents, recyclability, and stability at room temperature for over two years. The incorporation of a non-canonical amino acid afforded a high degree of control over the bioorthogonal immobilization reaction. These results indicate that the specificity conferred by genetic code expansion produces advantages in protein immobilization and broadens the utility of such proteins to non-biological settings.

The Recent Advances in the Utility of Microbial Lipases: A Review

Lipases are versatile biocatalysts and are used in different bioconversion reactions. Microbial lipases are currently attracting a great amount of attention due to the rapid advancement of enzyme technology and its practical application in a variety of industrial processes. The current review provides updated information on the different sources of microbial lipases, such as fungi, bacteria, and yeast, their classical and modern purification techniques, including precipitation and chromatographic separation, the immunopurification technique, the reversed micellar system, aqueous two-phase system (ATPS), aqueous two-phase flotation (ATPF), and the use of microbial lipases in different industries, e.g., the food, textile, leather, cosmetics, paper, and detergent industries. Furthermore, the article provides a critical analysis of lipase-producing microbes, distinguished from the previously published reviews, and illustrates the use of lipases in biosensors, biodiesel production, and tea processing, and their role in bioremediation and racemization.

N-Amidation of Nitrogen-Containing Heterocyclic Compounds: Can We Apply Enzymatic Tools?

Amide bond is often seen in value-added nitrogen-containing heterocyclic compounds, which can present promising chemical, biological, and pharmaceutical significance. However, current synthesis methods in the preparation of amide-containing N-heterocyclic compounds have low specificity (large amount of by-products) and efficiency. In this study, we focused on reviewing the feasible enzymes (nitrogen acetyltransferase, carboxylic acid reductase, lipase, and cutinase) for the amidation of N-heterocyclic compounds; summarizing their advantages and weakness in the specific applications; and further predicting candidate enzymes through in silico structure-functional analysis. For future prospects, current enzymes demand further engineering and improving for practical industrial applications and more enzymatic tools need to be explored and developed for a broader range of N-heterocyclic substrates.

TiO2 nanotube immobilised 5-lipoxygenase-mediated screening and isolation of anti-inflammatory active compounds from the leaves of lonicera japonica thunb

In this work, a highly effective separation approach mediated by 5-Lipoxygenase (5-LOX) was established for screening and isolation of anti-inflammatory ingredients from leaves of Lonicera japonica Thunb. (LLJT). Using 5-LOX immobilised on TiO₂ nanotubes as a microreactor, the targeted screening was exploited by combining with HPLC-MS system. Four compounds confirmed as luteolin, luteoside, lonicerin, and isochlorogenic acid C and a fraction (M1) were screened out to be potent inhibitors of 5-LOX. Their anti-inflammatory activities were further investigated and confirmed by RAW 264.7 cells inflammation model and rat foot swelling model. Furthermore, M1 was prepared by MCI GEL CHP20P column chromatography, and further separated by Pre-HPLC. One new compound confirmed to be 5,7,3′,4′-tetrahydroxyflavone-7-O-sambubioside was first isolated from LLJT. The results provide a new method for the effective separation of active components derived from natural products.

Highlights

A 5-LOX mediated separation method was established for isolation of anti-inflammatory compounds.

An anti-inflammatory ingredient was separated by MCI GEL CHP20P column chromatography.

One new compound was first isolated from leaves of Lonicera japonica Thunb.

5-LOX was immobilised on TiO₂ nanotubes and exploited by combining with HPLC-MS system.

The anti-inflammatory activity of screened components was evaluated.

Hotspots and Mechanisms of Action of the Thermostable Framework of a Microbial Thermolipase

The lipase TrLipB from Thermomicrobium roseum is highly thermostable. However, its thermostable skeleton and mechanism of action should be investigated for industrial applications. Toward this, TrLipB was crystallized using the hanging-drop vapor diffusion method and subjected to X-ray diffraction at 2.0 Å resolution in this study. The rigid sites, such as the prolines on the relatively flexible loops on the enzyme surface, were scanned. Soft substitutions of these sites were designed using both molecular dynamics (MD) simulation and site-directed mutagenesis. The thermostability of several substitutions decreased markedly, while the catalytic efficiencies of the P9G, P127G, P194G, and P300G mutants reduced substantially; additionally, the thermostable framework of the double mutant, P194G/P300G, was considerably perturbed. However, the substitutions on the lid of the enzyme, including P49G and P48G, promoted the catalytic efficiency to approximately 150% and slightly enhanced the thermostability below 80 °C. In MD simulations, the P100G, P194G, P100G/P194G, P194G/P300G, and P100G/P194G/P300G mutants showed high B-factors and RMSD values, whereas the secondary structures, radius of gyration, H-bonds, and solvent accessible surface areas of these mutants were markedly affected. Our observations will assist in understanding the natural framework of a stable lipase, which might contribute to its industrial applications.

A Convenient U-Shape Microreactor for Continuous Flow Biocatalysis with Enzyme-Coated Magnetic Nanoparticles-Lipase-Catalyzed Enantiomer Selective Acylation of 4-(Morpholin-4-yl)butan-2-ol

This study implements a convenient microreactor for biocatalysis with enzymes immobilized on magnetic nanoparticles (MNPs). The enzyme immobilized onto MNPs by adsorption or by covalent bonds was lipase B from Candida antarctica (CaLB). The MNPs for adsorption were obtained by covering the magnetite core with a silica shell and later with hexadecyltrimethoxysilane, while for covalent immobilization, the silica-covered MNPs were functionalized by a layer forming from mixtures of hexadecyl- and 3-(2-aminoethylamino)propyldimethoxymethylsilanes in 16:1 molar ratio, which was further activated with neopentyl glycol diglycidyl ether (NGDE). The resulting CaLB-MNPs were tested in a convenient continuous flow system, created by 3D printing to hold six adjustable permanent magnets beneath a polytetrafluoroethylene tube (PTFE) to anchor the MNP biocatalyst inside the tube reactor. The anchored CaLB-MNPs formed reaction chambers in the tube for passing the fluid through and above the MNP biocatalysts, thus increasing the mixing during the fluid flow and resulting in enhanced activity of CaLB on MNPs. The enantiomer selective acylation of 4-(morpholin-4-yl)butan-2-ol (±)-1, being the chiral alcohol constituent of the mucolytic drug Fedrilate, was carried out by CaLB-MNPs in the U-shape reactor. The CaLB-MNPs in the U-shape reactor were compared in batch reactions to the lyophilized CaLB and to the CaLB-MNPs using the same reaction composition, and the same amounts of CaLB showed similar or higher activity in flow mode and superior activity as compared to the lyophilized powder form. The U-shape permanent magnet design represents a general and easy-to-access implementation of MNP-based flow microreactors, being useful for many biotransformations and reducing costly and time-consuming downstream processes.

Listeria monocytogenes is a solvent tolerant organism secreting a solvent stable lipase: potential biotechnological applications

Purpose

The emerging biobased economy will require robust, adaptable, organisms for the production and processing of biomaterials as well as for bioremediation. Recently, the search for solvent tolerant organisms and solvent tolerant enzymes has intensified. Resilient organisms secreting solvent stable lipases are of particular interest for biotechnological applications.

Methods

Screening of soil samples for lipase-producing organisms was carried out on Rhodamine B plates. The most productive lipase-producing organisms were further screened for their resistance to solvents commonly used in biotechnological applications.

Results

In the course of screening, one of the isolated organisms that exhibited extracellular lipase activity, was identified as the human pathogen Listeria monocytogenes through 16S rRNA sequencing. Further exploration revealed that this organism was resistant to solvents ranging from log P − 0.81 to 4.0. Moreover, in the presence of these solvents, L. monocytogenes secreted an extracellular, solvent tolerant, lipase activity. This lipase retained approximately 80% activity when incubated in 30% (v/v) methanol for 24 h.

Conclusion

These findings identify L. monocytogenes as a potentially useful organism for biotechnological applications. However, the fact that Listeria is a pathogen is problematic and it will require the use of non-pathogenic or attenuated Listeria strains for practical applications. Nonetheless, the ability to adapt to rapidly changing environmental conditions, to grow at low temperatures, to resist solvents and to secrete an extracellular solvent tolerant lipase are unique and highly useful characteristics. The potential application of L. monocytogenes in wastewater bioremediation and plastics degradation is discussed.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10529-022-03284-5.

Immobilization of Interfacial Activated Candida rugosa Lipase Onto Magnetic Chitosan Using Dialdehyde Cellulose as Cross-Linking Agent

Candidarugosa lipase (CRL) was activated with surfactants (sodium dodecyl sulfate [SDS]) and covalently immobilized onto a nanocomposite (Fe₃O₄-CS-DAC) fabricated by combining magnetic nanoparticles Fe₃O₄ with chitosan (CS) using polysaccharide macromolecule dialdehyde cellulose (DAC) as the cross-linking agent. Fourier transform infrared spectroscopy, transmission electron microscope, thermogravimetric analysis, and X-ray diffraction characterizations confirmed that the organic–inorganic nanocomposite support modified by DAC was successfully prepared. Enzymology experiments confirmed that high enzyme loading (60.9 mg/g) and 1.7 times specific enzyme activity could be obtained under the optimal immobilization conditions. The stability and reusability of immobilized CRL (Fe₃O₄-CS-DAC-SDS-CRL) were significantly improved simultaneously. Circular dichroism analysis revealed that the active conformation of immobilized CRL was maintained well. Results demonstrated that the inorganic–organic nanocomposite modified by carbohydrate polymer derivatives could be used as an ideal support for enzyme immobilization.

Producing Natural Flavours from Isoamyl Alcohol and Fusel Oil by Using Immobilised Rhizopus oryzae Lipase

Enzymatic synthesis of short-chain esters (flavours) might enable their labelling as natural, increasing their value. Covalently immobilised Rhizopus oryzae lipase (EO-proROL) was used to synthesise isoamyl butyrate and acetate. In cyclohexane, the best performer reaction solvent, 1.8 times higher yield of isoamyl butyrate (ca. 100%) than isoamyl acetate (ca. 55%) was obtained. Optimum initial acid concentration (410 mM) and acid:alcohol mole ratio (0.5) were established by a central composite rotatable design to maximise isoamyl butyrate single-batch and cumulative production with reused enzyme. These conditions were used to scale up the esterification (150 mL) and to assess yield, initial esterification rate, productivity and enzyme operational stability. Commercial isoamyl alcohol and fusel oil results were found to be similar as regards yield (91% vs. 84%), initial reaction rate (5.4 µM min−1 with both substrates), operational stability (40% activity loss after five runs with both) and productivity (31.09 vs. 28.7 mM h−1). EO-proROL specificity for the structural isomers of isoamyl alcohol was also evaluated. Thus, a successful biocatalyst and product conditions ready to be used for isoamyl ester industrial production are here proposed.

Extremophilic lipases for industrial applications: A general review

With industrialization and development in modern science enzymes and their applications increased widely. There is always a hunt for new proficient enzymes with novel properties to meet specific needs of various industrial sectors. Along with the high efficiency, the green and eco-friendly side of enzymes attracts human attention, as they form a true answer to counter the hazardous and toxic conventional industrial catalyst. Lipases have always earned industrial attention due to the broad range of hydrolytic and synthetic reactions they catalyse. When these catalytic properties get accompanied by features like temperature stability, pH stability, and solvent stability lipases becomes an appropriate tool for use in many industrial processes. Extremophilic lipases offer the same, thermostable: hot and cold active thermophilic and psychrophilic lipases, acid and alkali resistant and active acidophilic and alkaliphilic lipases, and salt tolerant halophilic lipases form excellent biocatalyst for detergent formulations, biofuel synthesis, ester synthesis, food processing, pharmaceuticals, leather, and paper industry. An interesting application of these lipases is in the bioremediation of lipid waste in harsh environments. The review gives a brief account on various extremophilic lipases with emphasis on thermophilic, psychrophilic, halophilic, alkaliphilic, and acidophilic lipases, their sources, biochemical properties, and potential applications in recent decades.

An encodable multiplex microsphere-phase amplification sensing platform detects SARS-CoV-2 mutations

SARS-CoV-2 variants of concern (VOCs) contain several single-nucleotide variants (SNVs) at key sites in the receptor-binding region (RBD) that enhance infectivity and transmission, as well as cause immune escape, resulting in an aggravation of the coronavirus disease 2019 (COVID-19) pandemic. Emerging VOCs have sparked the need for a diagnostic method capable of simultaneously monitoring these SNVs. To date, no highly sensitive, efficient clinical tool exists to monitor SNVs simultaneously. Here, an encodable multiplex microsphere-phase amplification (MMPA) sensing platform that combines primer-coded microsphere technology with dual fluorescence decoding strategy to detect SARS-CoV-2 RNA and simultaneously identify 10 key SNVs in the RBD. MMPA limits the amplification refractory mutation system PCR (ARMS-PCR) reaction for specific target sequence to the surface of a microsphere with specific fluorescence coding. This effectively solves the problem of non-specific amplification among primers and probes in multiplex PCR. For signal detection, specific fluorescence codes inside microspheres are used to determine the corresponding relationship between the microspheres and the SNV sites, while the report probes hybridized with PCR products are used to detect the microsphere amplification intensity. The MMPA platform offers a lower SARS-CoV-2 RNA detection limit of 28 copies/reaction, the ability to detect a respiratory pathogen panel without cross-reactivity, and a SNV analysis accuracy level comparable to that of sequencing. Moreover, this super-multiple parallel SNVs detection method enables a timely updating of the panel of detected SNVs that accompanies changing VOCs, and presents a clinical availability that traditional sequencing methods do not.

The combination of covalent and ionic exchange immobilizations enables the coimmobilization on vinyl sulfone activated supports and the reuse of the most stable immobilized enzyme

The coimmobilization of lipases from Rhizomucor miehei (RML) and Candida antarctica (CALB) has been intended using agarose beads activated with divinyl sulfone. CALB could be immobilized on this support, while RML was not. However, RML was ionically exchanged on this support blocked with ethylendiamine. Therefore, both enzymes could be coimmobilized on the same particle, CALB covalently using the vinyl sulfone groups, and RML via anionic exchange on the aminated blocked support. However, immobilized RML was far less stable than immobilized CALB. To avoid the discarding of CALB (that maintained 90% of the initial activity after RML inactivation), a strategy was developed. Inactivated RML was desorbed from the support using ammonium sulfate and 1% Triton X-100 at pH 7.0. That way, 5 cycles of RML thermal inactivation, discharge of the inactivated enzyme and re-immobilization of a fresh sample of RML could be performed. In the last cycle, immobilized CALB activity was still over 90% of the initial one. Thus, the strategy permits that enzymes can be coimmobilized on vinyl sulfone supports even if one of them cannot be immobilized on it, and also permits the reuse of the most stable enzyme (if it is irreversibly attached to the support).

Constitutive Expression in Komagataella phaffii of Mature Rhizopus oryzae Lipase Jointly with Its Truncated Prosequence Improves Production and the Biocatalyst Operational Stability

Rhizopus oryzae lipase (ROL) containing 28 C-terminal amino acids of the prosequence fused to the N-terminal mature sequence in ROL (proROL) was successfully expressed in the methylotrophic yeast Komagataella phaffii (Pichia pastoris) under the constitutive glyceraldehyde-3-phosphate dehydrogenase promoter (PGAP). Although the sequence encoding the mature lipase (rROL) was also transformed, no clones were obtained after three transformation cycles, which highlights the importance of the truncated prosequence to obtain viable transformed clones. Batch cultures of the K. phaffii strain constitutively expressing proROL scarcely influenced growth rate and exhibited a final activity and volumetric productivity more than six times higher than those obtained with proROL from K. phaffii under the methanol-inducible alcohol oxidase 1 promoter (PAOX1). The previous differences were less marked in fed-batch cultures. N-terminal analysis confirmed the presence of the 28 amino acids in proROL. In addition, immobilized proROL exhibited increased tolerance of organic solvents and an operational stability 0.25 and 3 times higher than that of immobilized rROL in biodiesel and ethyl butyrate production, respectively. Therefore, the truncated prosequence enables constitutive proROL production, boosts bioprocess performance and provides a more stable biocatalyst in two reactions in which lipases are mostly used at industrial level, esterification (ethyl butyrate) and transesterification (biodiesel).