Effective adsorption of methylene blue dye from water solution using renewable natural hydrogel bionanocomposite based on tragacanth gum: Linear-nonlinear calculations

Advances in gum-based hydrogels and their environmental applications

Gum-based hydrogels (GBHs) have been widely employed in diverse water purification processes due to their environmental properties, and high absorption capacity. More desired properties of GBHs such as biodegradability, biocompatibility, material cost, simplicity of manufacture, and wide range of uses have converted them into promising materials in water treatment processes. In this review, we explored the application of GBHs to remove pollutants from contaminated waters. Water resources are constantly being contaminated by a variety of harmful effluents such as heavy metals, dyes, and other dangerous substances. A practical way to remove chemical waste from water as a vital component is surface adsorption. Currently, hydrogels, three-dimensional polymeric networks, are quite popular for adsorption. They have more extensive uses in several industries, including biomedicine, water purification, agriculture, sanitary products, and biosensors. This review will help the researcher to understand the research gaps and drawbacks in this field, which will lead to further developments in the future.

Green and Superior Adsorbents Derived from Natural Plant Gums for Removal of Contaminants: A Review

The ubiquitous presence of contaminants in water poses a major threat to the safety of ecosystems and human health, and so more materials or technologies are urgently needed to eliminate pollutants. Polymer materials have shown significant advantages over most other adsorption materials in the decontamination of wastewater by virtue of their relatively high adsorption capacity and fast adsorption rate. In recent years, "green development" has become the focus of global attention, and the environmental friendliness of materials themselves has been concerned. Therefore, natural polymers-derived materials are favored in the purification of wastewater due to their unique advantages of being renewable, low cost and environmentally friendly. Among them, natural plant gums show great potential in the synthesis of environmentally friendly polymer adsorption materials due to their rich sources, diverse structures and properties, as well as their renewable, non-toxic and biocompatible advantages. Natural plant gums can be easily modified by facile derivatization or a graft polymerization reaction to enhance the inherent properties or introduce new functions, thus obtaining new adsorption materials for the efficient purification of wastewater. This paper summarized the research progress on the fabrication of various gums-based adsorbents and their application in the decontamination of different types of pollutants. The general synthesis mechanism of gums-based adsorbents, and the adsorption mechanism of the adsorbent for different types of pollutants were also discussed. This paper was aimed at providing a reference for the design and development of more cost-effective and environmentally friendly water purification materials.

Elucidating the adsorption mechanism of Rhodamine B on mesoporous coconut coir-based biosorbents through a non-linear modeling and recycling approach

The search for renewable adsorbent materials has increased continuously, being the agro-wastes an interesting alternative. This work aimed to elucidate the mechanism of adsorption of Rhodamine B on crude and modified coconut fibers from aqueous systems and the feasibility of reusing the biosorbents. The chemical modification of crude coconut fiber was carried out by the organosolv process. The biosorbents were characterized by lignocellulosic composition, FTIR, TGA, WCA, SEM, nitrogen adsorption/desorption (BET-BJH), and pH of zero point of charge (pHPZC) analyses. The batch adsorption tests evaluated the effects of the adsorbent and adsorbate dosages, contact time, and temperature on Rhodamine B adsorption. For elucidating the adsorption mechanisms involved in the process, the non-linear forms of kinetic and isotherm models were used. The regeneration of the biosorbents was evaluated by carrying out the desorption experiments. Modified coconut fiber had an increase in the amount of α-cellulose, which influenced its structural, morphological, surface, and porous properties. The removal efficiency of Rhodamine B was about 90% for modified coconut fiber and 36% for crude coconut fiber. The dye adsorption was spontaneous and endothermic for both biosorbents, showing higher spontaneity and affinity with the adsorbate for biosorbent modified. Therefore, the coconut fiber can be considered an alternative to the traditional adsorbent materials that allows the reuse by four times without performance loss, in which its adsorptive capacity has increased through its chemical modification by a biorefinery process.

Structure and Adsorption Performance of Cationic Entermorpha prolifera Polysaccharide-Based Hydrogel for Typical Pollutants: Methylene Blue, Cefuroxime, and Cr (VI)

Hydrogels with polysaccharides as high polymer substrates have surprising advantages in wastewater treatment with complex components. Therefore, in this study, polysaccharides named EPS were extracted from Enteromorpha prolifera, a coastal pollutant with a wide range of sources, and cationic modification was performed to obtain CAEPS, the hydrogel with a double network structure was prepared based on EPS and CAEPS. Meanwhile, the structural characteristic of EPS and CAEPS-based hydrogel were identified by HPLC, AFM, FT-IR, TGA, SEM-EDS, Pore size distribution, and WCA, which showed that the porosity, apparent (skeletal) density, and hydrophilicity of CAEPS-hydrogels. We used nonlinear isotherms to uncover the adsorption mechanism of hydrogel applied to the water environment containing three typical pollutants (Methylene blue, Cefuroxime, and Cr (VI)). The results showed that the adsorption isotherm of the two hydrogels fit the Langmuir isotherm model, which indicated the monolayer adsorption of the pollution factor onto EPS- and CAEPS-hydrogels. The maximum adsorption capacities of CAEPS-hydrogels were higher than EPS-hydrogels, which indicated the microstructure and adsorption performance of the CAEPS-hydrogel are strengthened.

Carboxylate-functionalized dragon fruit peel powder as an effective adsorbent for the removal of Rhodamine B (cationic dye) from aqueous solution: adsorption behavior and mechanism

In this study, we used a simple and low-toxicity chemical treatment to make a carboxylate-functionalized dragon fruit peel powder (CF-DFPP) from dragon fruit peel to improve its capacity for adsorbing Rhodamine B (RhB) from an aqueous medium. Field Emission-Scanning Electron Microscopy/Energy-Dispersive X-ray (FE-SEM/EDX), point of zero charges (pH_PZC), Brunauer-Emmett-Teller (BET), and Fourier Transform Infrared (FT-IR) analyses were performed to characterize the adsorbent materials. The adsorption performance and mechanism for the removal of RhB were examined. The kinetic, isotherm and thermodynamic parameters were employed to evaluate the adsorption mechanism. Compared to other models, the Langmuir isotherm and PSO kinetic models better defined the experimental data. CF-DFPP adsorbent exhibited a maximum adsorption efficiency of 228.7 mg/g at 298 K for RhB adsorption. Thermodynamic analysis revealed that the adsorption of RhB by CF-DFPP was spontaneous (ΔG^o < 0) and exothermic (ΔH^o < 0) nature of the process. Different eluting agents were used in desorption tests, and NaOH was revealed to have greater desorption efficiency (96.8%). Furthermore, regeneration examinations revealed that the biosorbent could effectively retain RhB, even after six adsorption/desorption cycles. These findings demonstrated that the CF-DFPP might be a novel material for removing RhB from an aqueous medium.

Facile fabrication of semi-IPN hydrogel adsorbent based on quaternary cellulose via amino-anhydride click reaction in water

Clean and safe water resources play a key role in environmental safety and human health. Recently, hydrogels have attracted extensive attention due to their non-toxicity, controllable performance, and high adsorption. Herein, a semi- interpenetrating network hydrogel (semi-IPN-Gel) adsorbent based on quaternary cellulose (QC) was prepared by the amino-anhydride click reaction between maleic anhydride copolymer and polyacrylamine hydrochloride (PAH), and its adsorption properties for Eosin Y were studied. First, a binary copolymer (PAM) of acrylamide and maleic anhydride was synthesized by free radical polymerization. Then, the PAM, QC and PAH were dissolved in water, and the pH of the solution was adjusted to alkaline. Semi-IPN-Gel was successfully prepared by fast anhydride-amino click reaction. The preparation conditions of hydrogels were optimized by single-factor experiments. Finally, taking Eosin Y as a model pollutant, the adsorption performance of Eosin Y was studied. The factors influencing the adsorption capacity of the absorbents such as initial concentration of the Eosin Y, temperature, the amount of absorbent, ionic strength and pH of the Eosin Y solutions were investigated. And adsorption data were analyzed via the kinetic model and the isothermal model, indicating that the adsorption process of the hydrogel is a single layer chemisorption process.