Pickering emulsifiers based on enzymatically modified quinoa starches: Preparation, microstructures, hydrophilic property and emulsifying property

Spatially selective catalysis of OSA starch for preparation of Pickering emulsions with high emulsification properties

The traditional strategies of chemical catalysis and biocatalysis for producing octenyl succinic anhydride modified starch can only randomly graft hydrophobic groups on the surface of starch, resulting in unsatisfactory emulsification performance. In this work, a lipase-inorganic hybrid catalytic system with multi-scale flower like structure is designed and applied to spatially selective catalytic preparation of ocenyl succinic anhydride modified starch. With the appropriate floral morphology and petal density, lipases distributed in the "flower center" can selectively catalyze the grafting of hydrophobic groups in a spatial manner, the hydrophobic groups are concentrated on one side of starch particles. The obtaining OSA starch exhibits excellent emulsifying property, and the pickering emulsion has good protective effect on the embedded curcumin. This work provides a direction for the development of high-performance starch-based emulsifiers for the food and pharmaceutical industries, which is of great significance for improving the preparation and emulsification theory research of modified starch.

In vitro fecal fermentation of acylated porous Canna edulis starch and corresponding stabilized Pickering emulsions

In this study, acylated porous Canna edulis starch with varying degrees of substitution (DS) were prepared and employed for stabilizing Pickering emulsions. Subsequently, the fermentation characteristics of them were investigated. Enzymatically produced porous starch (PS) was esterified with acetic, propionic, butyric, or valeric anhydrides, yielding acetylated (PSA-0.116), propionylated (PSP-0.163), butyrylated (PSB-0.304), and valerylated PS (PSV-0.462) with different DS. Scanning electron microscopy revealed the presence of pores and surface micro-particles in the modified PS, confirming successful esterification through characteristic peaks in 1H NMR and a CO peak at 1736 cm-1 in the FT-IR spectrum. With increasing DS, starch exhibited reduced crystallinity (PSV, 26.61 %), elevated resistant starch content (PSV, 91.63 %), and a higher contact angle (PSV, 87.13°). Acylated PS particles effectively stabilized Pickering emulsions. Pickering emulsions stabilized by acylated PS with higher DS exhibited higher emulsification index and smaller droplet sizes. In vitro fermentation of acylated PS and corresponding stabilized Pickering emulsions fostered short-chain fatty acid production, boosted the relative abundance of beneficial bacteria (Bifidobacterium, Prevotella, etc.) while inhibited the growth of harmful bacteria (Escherichia-Shigella, Comamonas, etc.), maintaining the intestinal microbiota balance. These findings support the potential applications of acylated PS and corresponding stabilized Pickering emulsions in functional foods and drug delivery.

Potato starch/naringenin complexes for high-stability Pickering emulsions: Structure, properties, and emulsion stabilization mechanism

In this study, potato starch (PS)/naringenin (NAR) complex was prepared, and its properties and emulsification behavior were evaluated. The experimental results demonstrated that NAR successfully formed a complex with PS molecules through hydrogen bonds and other non-covalent interactions. The emulsifying capacity (ROV) of PS/NAR complex with 16 % composite ratio was 0.9999, which was higher than PS (ROV = 0.3329) (p < 0.05). Based on particle property analysis and molecular dynamics simulation, the mechanism of improving the emulsification performance might be the action of the benzene ring of NAR and intermolecular hydrogen bonding. In addition, the stability of the Pickering emulsions with PS/NAR complexes as emulgators was significantly improved. The emulsifying and rheological behavior of starch-based Pickering emulsions could be adjusted by changing the proportion of the complexes. Results demonstrated that the PS/NAR complexes might be a prospective stabilizer of Pickering emulsions based on starch material and might expand the use of PS in edible products.

Analysis of instability of starch-based Pickering emulsion under acidic condition of pH < 4 and improvement of emulsion stability

Starch-based Pickering emulsions exhibit high interfacial stability in a certain range of mild pH environments. On the contrary, many studies have reported that when the pH value is <4, it often leads to different degrees of emulsion instability. In this paper, the microscopic state of starch granules in the emulsion and its effect on the stability of the emulsion were observed and analyzed by atomic force microscope (AFM) in tapping mode. At the same time, Pickering emulsions in acidic environment were prepared by using the gel properties of methyl cellulose (MC) in synergy with esterified high amylose maize starch (M-HAMS) granules. The results show that in the emulsion with pH 3, the excessive H + ion inhibits the swelling of M-HAMS granules and prevents it from forming a stable gel structure, which is the main cause of emulsion instability. The polarity of MC with water contact angle (WCA) of 81.8° is similar to that of M-HAMS granules with WCA of 80.1°, and a uniform and ordered micro-nanostructure is formed in the aqueous phase. The prepared acidic (pH 3-4) emulsion has good stability during the observation period of 30 days.

Structurally Modified Polysaccharides: Physicochemical Properties, Biological Activities, Structure-Activity Relationship, and Applications

Polysaccharides are an important class of biomolecules derived from several sources. However, the inherent structure of polysaccharides prevents them from exhibiting favorable physicochemical properties, which restricts their development in agriculture, industry, food, and biomedicine. This paper systematically summarizes the changes in the primary and advanced structures of modified polysaccharides, and focuses on the effects of various modification methods on the hydrophobicity, rheological properties, emulsifying properties, antioxidant activity, hypoglycemic, and hypolipidemic activities of polysaccharides. Then there is a list the applications of modified polysaccharides in treating heavy metal pollutants, purifying water resources, improving beverage stability and bread quality, and precisely delivering the drug. When summarized and reviewed, the information above can shed further light on the relationship between polysaccharide structure and function. Determining the structure-activity relationship provides a scientific basis for the direction of molecular modifications of polysaccharides.

Dry Ball-Milled Quinoa Starch as a Pickering Emulsifier: Preparation, Microstructures, Hydrophobic Properties and Emulsifying Properties

This research supplied a "cleaner-production" way to produce "clean-label" quinoa starch-based Pickering emulsifier with excellent emulsifying properties. The effects of dry ball-milling time and speed on the multi-scale structures and emulsifying properties of quinoa starch were studied. With increasing ball-milling time and speed, particle size first decreased and then increased, the crystallinity, lamellar structure and short-range ordered structure gradually decreased, and contact angle gradually increased. The increased contact angle might be related to the increased oil absorption properties and the decreased water content. The emulsification properties of ball-milled quinoa starch (BMQS)-based Pickering emulsions increased with the increase in ball-milling time and speed, and the emulsions of BMQS-4 h, 6 h, 8 h, and 600 r reached the full emulsification state. After 120 days' storage, the oil droplets of BMQS-2 h (BMQS-400 r) deformed, the oil droplets increased, and the emulsification index decreased. The emulsification index and the oil droplets of BMQS-4 h, 6 h, 8 h and 600 r-based emulsions did not show obvious changes after storage, indicating the good emulsifying stability of these BMQS-based emulsions, which might be because that the relatively larger amount of starch particles that dispersed in the voids among the oil droplets could act as stronger network skeletons for the emulsion gel. This Pickering emulsifier was easily and highly efficiently produced and low-cost, having great potential to be used in the food, cosmetic and pharmaceutical industries.

Development of a Novel Energy Saving and Environmentally Friendly Starch via a Graft Copolymerization Strategy for Efficient Warp Sizing and Easy Removal

Warp sizing is a key process in textile production. However, before the yarn/fabric finishing, such as dyeing, the paste adhering to the warp must be eliminated to ensure optimal dyeing properties and the flexibility of the fabric. Therefore, the sizing will often consume a lot of energy and produce a lot of industrial wastewater, which will cause serious harm to the environment. In this study, we have developed an energy saving and environmentally friendly starch-based slurry by modifying natural starch with acrylamide. The paste has excellent viscosity stability and fiber adhesion, and exhibits excellent performance during warp sizing. In addition, the slurry has good water solubility at 60-70 °C, so it is easy to desize at low temperatures. Because of this, the sizing of the warp can be deslimed directly from the yarn during subsequent washing processes. This work can not only reduce some costs for the textile industry, but also achieve the purpose of energy conservation and emission reduction.

Waxy maize starch incorporated (-)-epigallocatechin-3-gallate can stabilize emulsion gel and improve antioxidant activity

A food-grade emulsion gel was stabilized using waxy maize starch (WS) incorporated (-)-epigallocatechin-3-gallate (EGCG) at different ratio (from 5 % to 20 %, w/w). The microstructure, rheological behavior, physical stability and antioxidant activity of emulsion gels were investigated using confocal laser scanning microscopy (CLSM), cryo-scanning electron microscopy (cryo-SEM), and rheometer, etc. The results suggested that incorporated EGCG obviously affected the spatial configuration of WS hydrogel. The WS/EGCG hydrogels presented an excellent lipophilic capacity characterized by tightly adhering to linseed oil droplets in the emulsion gels. Moreover, the viscosity, viscoelasticity and physical stability of the emulsion gels stabilized by the WS/EGCG hydrogel matrices were significantly enhanced. The emulsion gel stabilized by the WS/EGCG hydrogel matrix (15 % EGCG) had long-term emulsifying stability because its emulsified phase volume fraction (77.14 %) remained stable for 30 days. Compared with typical natural and synthetic antioxidants in food and pharmaceutical processing, the emulsion gels stabilized by the WS/EGCG hydrogel matrices showed significant stronger DPPH (97.45 %) and ABTS•+ (97.97 %) free radical scavenging activity. These results demonstrate that WS/EGCG hydrogels can not only be used in food-grade matrix materials to stabilize emulsion gels but also improve the antioxidant activity of the emulsion gels.

Comparative study on the in vitro digestion of different lipids in starch-based Pickering emulsions

Starch-based Pickering stabilizer has attracted more attentions due to its health-friendly attribute. Lipid digestion in Pickering emulsion is the key to its delivery ability for active substances. Herein, in vitro oral-gastric-intestinal digestions of Pickering emulsions stabilized by starch particles with different oil phases (e.g., coconut, corn, olive, and sunflower oils) were investigated. The highest rate of lipid digestion was coconut oil (25.71 %), followed by olive (12.64 %), corn (11.16 %), and sunflower (8.99 %) oils. The lipid digestibility was influenced by saturation of fatty acids: coconut (91.41 %)>olive (16.58 %)>corn (14.63 %)>sunflower (10.85 %) oils. The increase of starch concentration (0.5 % - 4.0 %, w/w) had positive effects, while the increase of oil fraction (25 % - 70 %, v/v) had negative impacts on free fatty acid release due to the formation of different initial droplet sizes. The microstructures observed using confocal laser scanning microscope indicated that starch-based Pickering emulsion possessed super stability against oral and gastric digestions, which made it a superior delivery system for lipophilic active substances under severe gastric environment. These results may promote the design of functional food emulsions stabilized by starch particles which can regulate digestion of triglycerides.

Bletilla striata composite nanofibrous membranes prepared by emulsion electrospinning for enhanced healing of diabetic wounds

Diabetic wounds impose enormous distress and financial burden on patients, and finding effective dressings to manage wounds is critical. As a Chinese herbal medicine with a long history of Clinical application, Bletilla striata has significant medicinal effects in the therapy of various wounds. In this study, PLA and the pharmacodynamic substances of Bletilla striata were prepared into fibrous scaffolds by emulsion electrospinning technology for the management of diabetic wounds in mice. The results of scanning electron microscopy showed that the core-shell structure fibre was successfully obtained by emulsion electrospinning. The fibre membrane exhibited excellent water absorption capability and water vapor transmission rate, could inhibit the growth of Staphylococcus aureus and Pseudomonas aeruginosa, had good compatibility, and achieved excellent healing effect on diabetic wounds. Especially in the in vivo wound healing experiment, the wound healing rate of composite fibre membrane treatment reached 98.587 ± 2.149% in 16 days. This work demonstrated the good therapeutic effect of the developed fibrous membrane to diabetic wound, and this membrane could be potentially applied to chronic wound healing.

Preparation and characterisation of linalool oil-in-water starch-based Pickering emulsions and the effects of the addition of cellulose nanocrystals on their stability

Creaming could be generated during storage of the starch-based Pickering emulsions. And cellulose nanocrystals in the solution are usually dispersed by relatively strong mechanical force, otherwise they may appear in the form of aggregates. In this work, we investigated the effects of cellulose nanocrystals on the stability of the starch-based Pickering emulsions. Results showed that the stability of Pickering emulsions was significantly improved by adding cellulose nanocrystals. Cellulose nanocrystals increased the viscosity, electrostatic repulsion and steric hindrance of the emulsions, which delayed the movement of droplets and obstructed the contact between droplets. This study provides new insights into the preparation and stabilisation of starch-based Pickering emulsions.

Native and modified starches from underutilized seeds: Characteristics, functional properties and potential applications

Seeds represent a potential source of starch, containing at least 60-70% of total starch, however many of them are treated as waste and are usually discarded. The review aim was to analyze the characteristics, functional properties, and potential applications of native and modified starches from underutilized seeds such as Sorghum bicolor L. Moench (WSS), Chenopodium quinoa, Wild. (QSS), Mangifera indica L. (MSS), Persea americana Mill. (ASS), Pouteria campechiana (Kunth) Baehni (PCSS), and Brosimum alicastrum Sw. (RSS). A systematic review of scientific literature was carried out from 2014 to date. Starch from seeds had yields above 30%. ASS had the higher amylose content and ASS and RSS showed the highest values in water absorption capacity and swelling power, contrary to MSS and PCSS while higher thermal resistance, paste stability, and a lower tendency to retrograde were observed in MSS and RSS. Functional properties such as water solubility, swelling power, thermal stability, low retrogradation tendency, and emulsion stability were increased in RSS, WSS, QSS, and MSS with chemical modifications (Oxidation, Oxidation-Crosslinking, OSA, DDSA, and NSA) and physical methods (HMT and dry-heat). Digestibility in vitro showed that WSS and QSS presented high SDS fraction, while ASS, MSS, PCSS, and HMT-QSS presented the highest RS content. Native or modified underutilized seed starches represent an alternative and sustainable source of non-conventional starch with potential applications in the food industry and for the development of healthy foods or for special nutritional requirements.

Synthesis and characterization of sago starch nanocrystal laurate as a food grade particle emulsifier

Starch nanocrystals (SNCs) are tiny particles that possess unique qualities due to their small size, such as increased crystallinity, thin sheet structure, low permeability, and strong resistance to digestion. Although sago starch nanocrystals (SNCs) are naturally hydrophilic, their properties can be modified through chemical modifications to make them more versatile for various applications. In this study, the esterification process was used to modify SNCs using lauroyl chloride (LC) to enhance their surface properties. Three different ratios of LC to SNC were tested to determine the impact on the modified SNC (mSNC). The chemical changes in the mSNC were analyzed using FTIR and ¹H NMR spectroscopy. ##The results showed that as the amount of LC increased, the degree of substitution (DS) also increased, which reduced the crystallinity of the mSNC and its thermal stability. However, the esterification process also improved the hydrophobicity of the SNC, making it more amphiphilic. The emulsification capabilities of the mSNC were investigated using a Pickering emulsion, and the results showed that the emulsion made from mSNC-1.0 had better stability than the one made from pristine SNC. This study highlights the potential of SNC as a particle emulsifier and demonstrates how esterification can improve its emulsification capabilities.

Facile solid-phase synthesis of starch-fatty acid complexes via mechanical activation for stabilizing curcumin-loaded Pickering emulsions

Starch-fatty acid complexes used as emulsifiers have caught great attention because of their renewability and excellent emulsifying property, the development of a simple and efficient synthesis method for the fabrication of starch-fatty acid complexes is still greatly challenging. Herein, the rice starch-fatty acid complexes (NRS-FA) were successfully prepared by mechanical activation method using different long chain fatty acids (myristic acid, palmitic acid, and stearic acid) and native rice starch (NRS) as the raw materials. The results showed that the prepared NRS-FA with a V-shaped crystalline structure exhibited a higher digestion resistance than NRS. Moreover, when the chain length of fatty acids increased from 14 to 18 carbons, the contact angle of the complexes was much closer to 90°, and the average particle size was smaller, deriving the better emulsifying property of NRS-FA18 complexes, which were suitable to be used as an emulsifier to stabilize curcumin-loaded Pickering emulsions. The results of storage stability and in vitro digestion showed that the curcumin retention could reach 79.4 % after 28 days of storage and 80.8 % of curcumin was retained in the system after simulated gastric digestion, showing good encapsulation and delivery performance of prepared Pickering emulsions, which attributed to the enhancement of the coverage of particles at the oil-water interface.

Octenyl succinic anhydride modified starch with excellent emulsifying properties prepared by selective hydrolysis of supramolecular immobilized enzyme

Octenyl succinic anhydride modified starch is a common green and safe emulsifier. Although the conventional pretreatment method of free enzyme hydrolysis increases the hydroxyl content on the starch surface, thus improving the grafting degree of octenyl succinic anhydride and the amphiphilicity of the modified starch, the amylose and amylopectin structures are indiscriminately hydrolyzed, reducing the emulsion stability of modified starch. In this work, α-amylase organic-inorganic hybrid nanoflower biocatalyst is designed and synthesized for pretreatment of synthetic octenyl succinic anhydride modified starch. The α-amylase organic-inorganic hybrid nanoflower biocatalyst with a unique micro-nano spatial structure can selectively hydrolyze the amylopectin and protect the amylose of starch. The amylose ratio of starch pretreated by nanoflower biocatalyst is about twice that of starch pretreated by free enzyme, reaching 22.62 %. Meanwhile, the granular structure of starch is not damaged. The obtained octenyl succinic anhydride modified starch exhibits a high degree of substitution, up to 0.0213. The emulsion prepared with this modified starch maintains excellent emulsifying properties and stability. This study provides a novel strategy for the preparation of octenyl succinic anhydride modified starch with excellent emulsifying properties, which promote the application of octenyl succinic anhydride modified starch in food, pharmaceutical and cosmetic industries.

Characterization of Pickering emulsion by SCFAs-modified debranched starch and a potent for delivering encapsulated bioactive compound

The Pickering emulsion was prepared by short-chain fatty acids (SCFAs) esterified debranched starch. The microstructure, particle size distribution, rheological properties and stability of the emulsions showed that the introduction of acyl groups improved the ability of starch to stabilize the emulsions, in which the butyrylated starch with longer acyl side chains exhibited higher emulsifying ability compared to acetylated and propionylated starches. Pickering emulsions stabilized with butyrylated starch as stabilizer have better stability after 30 days of storage. The particle size distribution of SCFAs-esterified starch emulsions with enzymatic debranching pretreatment was more concentrated and the droplet size was further reduced, which improved the instability factors such as flocculation, agglomeration or Ostwald ripening of emulsions induced by conventional SCFAs-esterified emulsions and further improved the stability of SCFAs-esterified emulsions. More importantly, butyrylated starch (with or without debranched pretreatment) emulsions exhibited smaller and more uniform droplet shapes and higher curcumin encapsulation efficiency (EE%) in SCFAs-esterified starch emulsions, and the EE% of curcumin in debranched butyrylated starch emulsion increasing from 10.04 % in native starch emulsions to 50.70 %.

Advances in isolation, characterization, modification, and application of Chenopodium starch: A comprehensive review

The Chenopodium genus includes >250 species, among which only quinoa, pigweed, djulis, and kaniwa have been explored for starches. Chenopodium is a non-conventional and rich source of starch, which has been found effective in producing different classes of food. Chenopodium starches are characterized by their smaller granule size (0.4-3.5 μm), higher swelling index, shorter/lower gelatinization regions/temperature, good emulsifying properties, and high digestibility, making them suitable for food applications. However, most of the investigations into Chenopodium starches are in the primary stages (isolation, modification, and characterization), except for quinoa. This review comprehensively explores the major developments in Chenopodium starch research, emphasizing isolation, structural composition, functionality, hydrolysis, modification, and application. A critical analysis of the trends, limitations, and scope of these starches for novel food applications has also been provided to promote further scientific advancement in the field.

Comparison between Quinoa and Quillaja saponins in the Formation, Stability and Digestibility of Astaxanthin-Canola Oil Emulsions

Saponins from Quillaja saponaria and Chenopodium quinoa were evaluated as natural emulsifiers in the formation of astaxanthin enriched canola oil emulsions. The aim of this study was to define the processing conditions for developing emulsions and to evaluate their physical stability against environmental conditions: pH (2–10), temperature (20–50 °C), ionic strength (0–500 mM NaCl), and storage (35 days at 25 °C), as well as their performance in an in vitro digestion model. The emulsions were characterized, evaluating their mean particle size, polydispersity index (PDI), and zeta potential. Oil-in-water (O/W) emulsions were effectively produced using 1% oil phase and 1% emulsifier (saponins). Emulsions were stable over a wide range of pH values (4–10), but exhibited particle aggregation at lower pH, salt conditions, and high temperatures. The emulsion stability index (ESI) remained above 80% after 35 days of storage. The results of our study suggest that saponins can be an effective alternative to synthetic emulsifiers.

Enzymatically modified quinoa starch-based Pickering emulsion: Effect of enzymolysis and emulsifying conditions

Both the effects of enzymolysis condition on the microstructures and emulsifying property of enzymatic modified quinoa starch (EMQS) and the effects of emulsion formulation on the EMQS based emulsions were investigated. The emulsifying capacity (EC) and stability (ES) of EMQS were positive correlated with enzyme amount (0-2.4 % w/w_starch). The particle sizes of EMQS decreased and its hydrophobicity increased with increasing enzyme amount (0-2.4 % w/w_starch), which were the main reasons for the increasing emulsifying performance of EMQS. With the increasing starch concentration, the EC of the EMQS increased, the oil droplet size of the emulsion decreased. With the oil/water ratios ranging from 1:9 to 6:4, the emulsification index (EI) and oil droplet size of the emulsion increased. EMQS based emulsion had a relatively good stability in the pH range of 2-10. This study lays the foundation for the application of EMQS as a stable clean-label Pickering emulsifier.