Characterization of a natural biodegradable edible film obtained from arrowroot starch and iota-carrageenan and application in food packaging

Enhancement of polycaprolactone nanofiber film performance by hydrogen bonding interactions with chitosan for food packaging

Hybrid environmentally friendly nanocomposite films were synthesized via electrospinning using polycaprolactone (PCL) and chitosan (CH). The resulting nanofiber films displayed a homogeneous fibrous microstructure with average diameters between 250-270 nm. Molecular simulation experiments revealed a progressive increase in hydrogen bonding over time. The impact of different CH concentrations on surface roughness was investigated, with results showing that PCL/CH (2 %) reduced surface roughness by 240 % compared to pure PCL film. Furthermore, the addition of CH imparted stable hydrophobic properties to the nanofiber film, with a water contact angle remaining steady at 107° after 20 s. L929 cell experiments confirmed that the nanofiber film exhibits good biocompatibility. Practical application studies using blueberries demonstrated that the PCL/CH (2 %) film effectively preserved freshness at room temperature for up to 5 days. These findings indicate that PCL/CH (2 %) films hold significant potential for use in fruit packaging applications.

Characterization of a biocomposite film using coconut jelly powder to improve arrowroot starch and sodium alginate film forming properties

Composite polymers are promising solution to structural setbacks of starch and alginate-based films due to their hydrophilic attributes. Hence, this study aimed to investigate young coconut jelly powder (CJP), an under-utilized by-waste, as a filler using the casting method to develop a novel biocomposite from increments of CJP (1-3 %) to a blended resin of arrowroot starch, sodium alginate, and glycerol. Moreover, the films were characterized by physicomechanical (visual aspect, thickness, color, moisture content, tensile strength, and elongation at break); surface microstructure; water barrier (water vapor permeability, water solubility, and water activities); thermal, crystallinity, and functional group properties; soil, river water, and seawater biodegradability; and coating application in cherry tomato. The results showed CJP improved tensile strength from 1.84 to 9.35 MPa and lowered moisture content from 33.44 to 18.92 %, and revealed compatibility within a semi-crystalline film matrix of high thermal stability, which depicted smooth surface areas and opacity suitable for packaging. The findings demonstrated faster biodegradability rates in soils (14-35 days) than water tests (152-180 days). Furthermore, coating significantly delayed weight loss while preserving visible color and flesh quality of the cherry tomato. In conclusion, the CJP-based biocomposite films presented a potential biodegradable eco-friendly alternative to the food packaging industry.

Impact of Premna microphylla Turcz leaf water extracts on the properties of gelatin-carrageenan edible film and its application in cherry tomatoes storage

This study investigated the potential of enhancing edible film (EF) formulations by incorporating Premna microphylla Turcz leaf (PM) water extracts (PMWE) and glycerol as plasticizers. Incorporating 75 % PMWE and 5 % glycerol significantly improved the physicochemical and mechanical properties of the films while effectively preserving the quality indicators and extending the shelf-life of cherry tomatoes (CT; Lycopersicon esculentum Mill) in film and coating applications. The PMWE-based films and coatings reduced decay rates (from 80 to 36-52 %) and exhibited a statistically significant difference (p < 0.05) compared to the control group. These findings highlight the potential of PMWE as an effective ingredient in EF formulations, capable of extending shelf-life to 12-16 days, offering promising applications in packaging materials. However, further advancements are required to address the limitations and enable large-scale trials during the mass production stage. Expecting to achieve optimized process formulations and conditions for CT or other agricultural product packaging materials.

Improving physicomechanical properties of arrowroot starch films incorporated with kappa-carrageenan: Sweet cherry coating application

Arrowroot starch (AS)-based films potential is influenced by its low-cost processing and high transparency packaging material but low tensile strength; hence, AS was blended with kappa-carrageenan (KC) to improve mechanical properties of AS-based films and enhance its potential use in food packaging or coating applications. AS-KC-based films were characterized based on structural, physicomechanical, thermal, pasting properties, and coating application in sweet cherry. The films demonstrated high tensile strength from 3.2 to 29.4 MPa and low elongation properties from 160.3 % to 1.9 %. Moreover, AS/KC films exhibited peak viscosities of 18.7 to 34.8 RVU, and thermal analysis depicted lower weight losses (59-45 %) compared to AS-based films (62 %). In addition, sweet cherry samples coated with AS/KC films and stored at 20 °C for 15 days depicted lower weight losses (26.6 %) compared to non-coated samples (>41 %), which indicated the potential use of the film's coating application in extending the shelf life and quality of fresh fruits.

Biodegradable, UV-blocking, and antioxidant films from alkali-digested lignocellulosic residue fibers of switchgrass

The development of bio-friendly materials to replace single-use plastics is urgently needed. In this regard, cellulosic material from plants is a promising alternative. However, due to the risk of forest depletion, agricultural biomass stands out as a favorable choice. Toward this end, switchgrass, an underutilized grass, presents itself as a viable source of lignocellulose that can be turned into a bio-friendly material. Herein, lignocellulosic residue from switchgrass has been extracted using two different concentrations of NaOH (20% and 50% w/v), solubilized in aqueous ZnCl2 solution, and crosslinked with CaCl2 (200, 300, 400, and 500 mM) to prepare biodegradable films. The color, thickness and moisture, water solubility, water absorption, water vapor permeability, tensile strength and elongation, biodegradation, UV transmittance, and antioxidant activity of films have been studied. The films possess a high tensile strength of 14.7 MPa and elongation of 4.7%. They block UVB-radiation and hold antioxidant properties. They display good water vapor permeability of 1.410-1.6 × 10-11 gm-1s-1Pa-1 and lose over 80% of their weight at 30% soil moisture within 40 days. An increase in the CaCl2 amount decreased the water vapor permeability, elongation, UV transmittance, and biodegradation but increased the transparency, tensile strength and antioxidant property. Overall, films of alkali-digested lignocellulosic residue of switchgrass showed excellent potential to be used against lightweight plastics and support the circular economy.

Utilization of Spent Coffee Grounds as a Food By-Product to Produce Edible Films Based on κ-Carrageenan with Biodegradable and Active Properties

Coffee ranks as the second most consumed beverage globally, and its popularity is associated with the growing accumulation of spent coffee grounds (SCG), a by-product that, if not managed properly, constitutes a serious ecological problem. Analyses of SCG have repeatedly shown that they are a source of substances with antioxidant and antimicrobial properties. In this study, we assessed SCG as a substrate for the production of edible/biodegradable films. The κ-carrageenan was utilized as a base polymer and the emulsified SCG oil as a filler. The oil pressed from a blend of Robusta and Arabica coffee had the best quality and the highest antioxidant properties; therefore, it was used for film production. The film-forming solution was prepared by dissolving κ-carrageenan in distilled water at 50 °C, adding the emulsified SCG oil, and homogenizing. This solution was cast onto Petri dishes and dried at room temperature. Chemical characterization showed that SCG increased the level of polyphenols in the films and the antioxidant properties, according to the CUPRAC assay (CC1 23.90 ± 1.23 µmol/g). SCG performed as a good plasticizer for κ-carrageenan and enhanced the elongation at the break of the films, compared with the control samples. The solubility of all SCG films reached 100%, indicating their biodegradability and edibility. Our results support the application of SCG as an active and easily accessible compound for the food packaging industry.

The application of starch-based edible film in food preservation: a comprehensive review

Using renewable resources for food packaging not only helps reduce our dependence on fossil fuels but also minimizes the environmental impact associated with traditional plastics. Starch has been a hot topic in the field of current research because of its low cost, wide source and good film forming property. However, a comprehensive review in this field is still lacking. Starch-based films offer a promising alternative for sustainable packaging in the food industry. The present paper covers various aspects such as raw material sources, modification methods, and film formation mechanisms. Understanding the physicochemical properties and potential commercial applications is crucial for bridging the gap between research and practical implementation. Finally, the application of starch-based films in the food industry is discussed in detail. Different modifications of starch can improve the mechanical and barrier properties of the films. The addition of active substances to starch-based films can endow them with more functions. Therefore, these factors should be better investigated and optimized in future studies to improve the physicochemical properties and functionality of starch-based films. In summary, this review provides comprehensive information and the latest research progress of starch-based films in the food industry.

Active whey protein/hydroxypropyl methylcellulose edible films incorporated with cinnamaldehyde: Characterization, release kinetics and application to Mongolian cheese preservation

Edible films with modulated release of antimicrobial agents are important for food preservation. Herein, antimicrobial edible films were prepared using whey protein (WP) and hydroxypropyl methylcellulose (HM) as polymer matrix materials and cinnamaldehyde (CIN) as antimicrobial agent. The mass ratios of WP and HM were 100/0, 75/25, 50/50, 25/75 and 0/100. The release kinetics of CIN through the film was studied, applying the Fickian model, power law and Weibull model. The films were also characterized by physical and structural characteristics, and antibacterial activity. In comparison to other films, the CIN-loaded film with a WP/HM ratio of 50/50 had better moisture resistance, water vapor barrier properties and mechanical properties. High correlation factors were obtained by fitting the CIN release data with the power law (R2 > 0.96) and Weibull model (R2 > 0.97). The diffusion mechanism of CIN was pseudo-Fickian. The diffusion coefficients (D1 and D2) had a positive linear relationship with the HM ratio, suggesting that a high HM ratio was beneficial to the CIN release. Finally, the WH50-C film was successfully used to preserve Mongolian cheese. This research provides a new perspective on the design of active packaging film with sustained-release characteristics.

Ag Nanoparticle Incorporated Guar Gum-Sodium Alginate-I-Carrageenan Tribiopolymer Blended Cloth Waste Lint Extracted Cellulose Nanocrystal Antimicrobial Composite Film

A biopolymer-based formulation for robust and active food packaging material was developed. This material consisted of a blend of three biopolymers (guar gum-sodium alginate-i-carrageenan) reinforced by cellulose nanocrystals (CNC) alongside the integration of silver nanoparticles (AgNPs) with varying sizes. The CNC utilized in this process was derived from cloth waste lint (CWL) generated from a household cloth dryer machine. This CNC synthesis underwent a series of solvent treatments to yield the CNC used in the composite. CNC and AgNPs were incorporated into the tribiopolymeric blend matrix to construct a nanocomposite film that showed excellent tensile strength (∼90 MPa). The nanocomposite film also exhibited antimicrobial activity against Escherichia coli ATCC 25922 and Bacillus cereus MTCC 1272. In this report, it was demonstrated that the zone of inhibition against E. coli and B. cereus depends on the variation of size and amount of AgNPs inside the polymeric matrix. The practical applicability of such a film was also demonstrated by applying it to sliced bread and the enhancement of the shelf life of the raped bread was compared with a control. Thus, the guar gum-sodium alginate-i-carrageenan tribiopolymer blend with a cloth waste lint extracted cellulose nanocrystal composite film is antimicrobial, hence, an excellent candidate as an active packaging film.

Recent Highlights in Sustainable Bio-Based Edible Films and Coatings for Fruit and Vegetable Applications

The present review paper focuses on recent developments in edible films and coatings made of base compounds from biological sources, namely plants, animals, algae, and microorganisms. These sources include by-products, residues, and wastes from agro-food industries and sea products that contribute to sustainability concerns. Chitosan, derived from animal biological sources, such as crustacean exoskeletons, has been the most studied base compound over the past three years. Polysaccharides typically constitute no more than 3-5% of the film/coating base solution, with some exceptions, like Arabic gum. Proteins and lipids may be present in higher concentrations, such as zein and beeswax. This review also discusses the enrichment of these bio-based films and coatings with various functional and/or bioactive compounds to confer or enhance their functionalities, such as antimicrobial, antioxidant, and anti-enzymatic properties, as well as physical properties. Whenever possible, a comparative analysis among different formulations was performed. The results of the applications of these edible films and coatings to fruit and vegetable products are also described, including shelf life extension, inhibition of microbial growth, and prevention of oxidation. This review also explores novel types of packaging, such as active and intelligent packaging. The potential health benefits of edible films and coatings, as well as the biodegradability of films, are also discussed. Finally, this review addresses recent innovations in the edible films and coatings industry, including the use of nanotechnologies, aerogels, and probiotics, and provides future perspectives and the challenges that the sector is facing.

Design of cationic surfactant reinforced carrageenan waterproof composite films and applied as water induced electricity generator

Carrageenan (CR) is a renewable polysaccharide material for packaging application due to its good film-forming property, but its use can be limited by the water solubility. In this research, CR hydrogels were modified by quaternary ammonium surfactants with different length of hydrocarbon tails (n, 8≦n≦16) by adsorption method and waterproof films were obtained after drying. The composition and charge interaction of composite films was confirmed by FTIR. Both thermogravimetric analysis and energy dispersive spectrometer indicated that the surfactant ions replaced K+ to form complexes with CR. The X-ray diffraction revealed the decreased amorphous nature of composite films compared to neat CR film. Water-related physical properties, such as water content, weight percentage change after contact with water, water vapor transmission, and water contact angle were intimately related to n. When 8≦n≦14, the waterproof properties were enhanced with the increase of n. Meanwhile, the waterproof property of composite film was ascertained by the no leakage result in the boiling water packaging experiment. When n = 16, sandwich structure was found in the sectional micromorphology images, and water bag structure formed after immersed into water. By comparing the mechanical properties of the composite films in different condition, we found that quaternary ammonium surfactants improved significantly the tensile strength in water and increased elongation at break in dry state. The composite films can be used as water induced voltage generator for their polyelectrolyte nature. Benefiting from the high stability of the composite films in water, their water-induced voltage generation process had good recyclability. Due to the antimicrobial activity of the quaternary ammonium salts and the waterproof property, composite films were more stable and degraded more slowly than neat CR film in nature environment.

The reduce of water vapor permeability of polysaccharide-based films in food packaging: A comprehensive review

Polysaccharide-based films are favored in the food packaging industry because of their advantages of green and safe characters, as well as natural degradability, but due to the structural defects of polysaccharides, they also have the disadvantages of high water vapor permeability (WVP), which greatly limits their application in the food packaging industry. To break the limitation, numerous methods, e.g., physical and/or chemical methods, have been employed. This review mainly elaborates the up-to-date research status of the application of polysaccharide-based films (PBFs) in food packaging area, including various films from cellulose and its derivatives, starch, chitosan, pectin, alginate, pullulan and so on, while the methods of reducing the WVP of PBFs, mainly divided into physical and chemical methods, are summarized, as well as the discussions about the existing problems and development trends of PBFs. In the end, suggestions about the future development of WVP of PBFs are presented.

Effect of the addition of biochar and wood vinegar on the morphology of heavy metals in composts

In the experiment, the morphology of heavy metals (Pb, Cr, Cd, and Ni, HMs) was characterized using flame atomic absorption spectroscopy. In addition, Fourier transform infrared spectroscopy (FTIR) and three-dimensional excitation-emission matrix fluorescence spectroscopy (3D-EEM) were used to characterize the correlation between environmental factors and metal morphology in the rotting compost from several angles. The results showed that the humus treated with wood vinegar solution had a high degree of humification and rich aromatic structure. FTIR spectroscopy confirmed that the degree of humus aromatization gradually increased during the composting process, which enhanced the complexation of humus (HS) with HMs but had less effect on Ni. In addition, the optimum concentration of wood vinegar (WV) was determined to be 1.75%. The results of the study showed that in the Pb passivation treatment group, the proportion of soluble (Red) and exchangeable states (Exc) converted to oxidized (Oxi) and residual states (Res) was 8%, 14%, 6%, 1%, and 12% in the CK, T1, T2, T3, and T4 treatment groups, respectively; in the Cr passivation treatment group, the proportion of Cr-Red and Cr-Exc converted to oxidized and residual states was 31%, 33%, 25%, 29%, and 25%; in the Cd passivation treatment group, the proportions of Cd-Red and Cd-Exc converted to oxidized and residual states were 5%, 15%, 4%, 9%, and 11%, respectively; whereas the Ni treatment group did not show any significant passivation effect. The proportion of Pb-Oxi was relatively stable, Cr-Oxi was converted to Cr-Res, whereas Cd showed the conversion of Cd-Oxi to Cd-Exc. SUVA254 and SUVA280 showed significant positive correlations with Pb-Res, Cr-Res and Ni-Res, and significant positive correlations with moisture content (MC); whereas MC was significantly negatively correlated with each form of HMs. Total potassium (TK), total nitrogen (TN), and both carbon (TOC) were negatively correlated with Pb-Res and Pb-Exc. Structural equation modeling verified the relationship between environmental factors and HMs, and the composting results showed that the addition of biochar (BC) and a higher percentage of WV could increase compost decomposition and passivate HMs to improve its agronomic function.

Current and emerging applications of carrageenan in the food industry

Carrageenan, a polysaccharide derived from red algae, has a long history of use as a food additive in food. Carrageenan comes in three classes, κ-, ι-, and λ-carrageenan, with different properties attributed to their organosulfate substitution levels, and their interactions with other food components give rise to properties such as water holding, thickening, gelling, and stabilizing. Over the years, carrageenan has been used in wide variety of food products such as meat, dairy, and flour-based products, and their mechanisms and functions in these matrices have also been studied. With the emergence of novel food technologies, carrageenan's potential applications have been extensively explored alongside, including encapsulation, edible films/coatings, plant-based analogs, and 3D/4D printing. As the food technology evolves, the required functions of food ingredients have changed, and carrageenan is being investigated for its role in these new areas. However, there are many similarities in the use of carrageenan in both classic and emerging applications, and understanding the underlying principles of carrageenan will lead to a proper use of carrageenan in emerging food products. This review focuses on the potential of carrageenan as a food ingredient in these emerging technologies mainly based on papers published within the past five years, highlighting its functions and applications to better understand its role in food products.

Non-Traditional Starches, Their Properties, and Applications

This review paper focuses on the recent advancements in the large-scale and laboratory-scale isolation, modification, and characterization of novel starches from accessible botanical sources and food wastes. When creating a new starch product, one should consider the different physicochemical changes that may occur. These changes include the course of gelatinization, the formation of starch-lipids and starch-protein complexes, and the origin of resistant starch (RS). This paper informs about the properties of individual starches, including their chemical structure, the size and crystallinity of starch granules, their thermal and pasting properties, their swelling power, and their digestibility; in particular, small starch granules showed unique properties. They can be utilized as fat substitutes in frozen desserts or mayonnaises, in custard due to their smooth texture, in non-food applications in biodegradable plastics, or as adsorbents. The low onset temperature of gelatinization (detected by DSC in acorn starch) is associated with the costs of the industrial processes in terms of energy and time. Starch plays a crucial role in the food industry as a thickening agent. Starches obtained from ulluco, winter squash, bean, pumpkin, quinoa, and sweet potato demonstrate a high peak viscosity (PV), while waxy rice and ginger starches have a low PV. The other analytical methods in the paper include laser diffraction, X-ray diffraction, FTIR, Raman, and NMR spectroscopies. Native, "clean-label" starches from new sources could replace chemically modified starches due to their properties being similar to common commercially modified ones. Human populations, especially in developed countries, suffer from obesity and civilization diseases, a reduction in which would be possible with the help of low-digestible starches. Starch with a high RS content was discovered in gelatinized lily (>50%) and unripe plantains (>25%), while cooked lily starch retained low levels of rapidly digestible starch (20%). Starch from gorgon nut processed at high temperatures has a high proportion of slowly digestible starch. Therefore, one can include these types of starches in a nutritious diet. Interesting industrial materials based on non-traditional starches include biodegradable composites, edible films, and nanomaterials.

Effect of Edible Coating Made from Arrowroot Flour and Kaffir Lime Leaf Essential Oil on the Quality Changes of Pork Sausage under Prolonged Refrigerated Storage

Edible coatings are pivotal in enhancing the quality of processed meat products, acting as barriers to environmental and microbial influences by adhering directly to the food surface. Arrowroot flour, a widely produced edible tuber in Thailand, is uncharted in terms of its capability and effectiveness as an edible coating on food materials. This study aims to elucidate the composition and spectral properties of arrowroot tuber flour (ATF) to discern its viability as an edible coating for pork sausages. ATF exhibited a composition predominantly featuring carbohydrates (74.78%), moisture (9.59%), and protein (8.89%), underlining its appropriateness as an edible coating. Rapid visco amylograph revealed ATF's significant pasting capability. This study incorporated kaffir lime leaves essential oil (KEO) into the ATF coating in diverse concentrations (0-3%). Fourier-transform Infrared spectroscopy illuminated characteristic peaks and bands, showing observable shifts with the integration of KEO, yet the majority of peak placements remained essentially unchanged. The microstructure of the coatings maintained its homogeneity at heightened KEO concentrations, reflecting compatibility with ATF. The efficacy of the ATF-KEO coatings was evaluated on pork sausages, using uncoated samples as controls. While color modifications were evident, coated sausages maintained consistent moisture content, water activity, and pH levels throughout the storage duration. The coated samples also manifested enhanced textural attributes and a decline in lipid oxidation, as evidenced by reduced TBARS levels compared to controls. A subsequent microbial examination corroborated the inhibitory capacity of the ATF-KEO coatings on the microbial proliferation in pork sausages, encapsulating Total Viable Count (TVC), psychrotrophic bacteria, and lactic acid bacteria. In conclusion, the findings substantiate the promising application of ATF, especially in synergy with KEO, as a proficient edible coating for meat products. This combination aids in preserving color and texture, impeding microbial advancement, and moderating lipid oxidation, thereby contributing to the overall quality and safety of the products.

Mechanical and Surface Properties of Edible Coatings Elaborated with Nanoliposomes Encapsulating Grape Seed Tannins and Polysaccharides

Edible composite coatings (ECC) formulated from biopolymers that incorporate antioxidant molecules represent an innovative alternative to improve food texture and provide health benefits. Tannins have aroused great interest due to their ability to stabilize suspensions and counteract the effects of free radicals. The mechanical and surface properties are crucial to establishing its quality and applicability. In this study, the objective was to analyze the mechanical and surface properties of ECC made with nanoliposomes that encapsulate grape seed tannins (TLS) and polysaccharides such as hydroxypropylmethylcellulose (HPMC) and kappa carrageenan (KCG) for their future direct application in foods susceptible to oxidation. The inclusion of HPMC or KCG affected the density, showing values in the range of 1010 to 1050 [kg/m3], evidencing significant changes (p < 0.05) in the surface tension in the TLS/FS-HPMC and TLS/FS mixtures. KCG and in the dispersion coefficients, with values in the range of -2.9 to -17.6 [mN/m] in HPS (S1) and -17.6 to -40.9 [mN/m] in PDMS (S2). The TLS/FS-HPMC coating showed higher stiffness and elastic recovery capacity than the TLS/FS-KCG coating, suggesting that the presence of TLS influenced the stiffness of the polymer. HPMC is recommended as a suitable polymer for coating solids, while KCG is more appropriate for suspensions. These findings provide valuable information for directly applying these ECC compounds to food products, potentially offering better preservation and health benefits.

Edible/Biodegradable Packaging with the Addition of Spent Coffee Grounds Oil

BACKGROUND

Following petroleum, coffee ranks as the second most extensively exchanged commodity worldwide. The definition of spent coffee ground (SCG) can be outlined as the waste generated after consuming coffee. The aims of the study are to produce edible/biodegradable packaging with the addition of spent coffee grounds (SCG) oil and to investigate how this fortification can affect chemical, textural, and solubility properties of experimentally produced films.

METHODS

The produced films were based on κ-carrageenan and pouring-drying techniques in petri dishes. Two types of emulsifiers were used: Tween 20 and Tween 80. The films were analyzed by antioxidant and textural analysis, and their solubility was also tested.

RESULTS

Edible/biodegradable packaging samples produced with the addition of SCG oil showed higher (p < 0.05) antioxidant capacity in comparison with control samples produced without the addition of SCG oil. The results of the research showed that the fortification of edible/biodegradable packaging with the addition of SCG oil changed significantly (p < 0.05) both chemical and physical properties of the films.

CONCLUSIONS

Based on the findings obtained, it was indicated that films manufactured utilizing SCG oil possess considerable potential to serve as an effective and promising material for active food packaging purposes.

A Review on Biopolymer-Based Biodegradable Film for Food Packaging: Trends over the Last Decade and Future Research

In recent years, much attention has been paid to the use of biopolymers as food packaging materials due to their important characteristics and properties. These include non-toxicity, ease of availability, biocompatibility, and biodegradability, indicating their potential as an alternative to conventional plastic packaging that has long been under environmental scrutiny. Given the current focus on sustainable development, it is imperative to develop studies on biopolymers as eco-friendly and sustainable food packaging materials. Therefore, the aim of this review is to explore trends and characteristics of biopolymer-based biodegradable films for food packaging, analyze the contribution of various journals and cooperation between countries, highlight the most influential authors and articles, and provide an overview of the social, environmental, and economic aspects of biodegradable films for food packaging. To achieve this goal, a bibliometric analysis and systematic review based on the PRISMA method were conducted. Relevant articles were carefully selected from the Scopus database. A bibliometric analysis was also conducted to discuss holistically, comprehensively, and objectively biodegradable films for food packaging. An increasing interest was found in this study, especially in the last 3 years with Brazil and China leading the number of papers on biodegradable films for food packaging, which were responsible for 20.4% and 12.5% of the published papers, respectively. The results of the keyword analysis based on the period revealed that the addition of bioactive compounds into packaging films is very promising because it can increase the quality and safety of packaged food. These results reveal that biodegradable films demonstrate a positive and promising trend as food packaging materials that are environmentally friendly and promote sustainability.

Hybridized sulfated-carboxymethyl cellulose/MWNT nanocomposite as highly selective electrochemical probe for trace detection of arsenic in real environmental samples

A highly selective and ultra-sensitive electrochemical sensing probe was proposed by combining sulfated-carboxymethyl cellulose (CMC-S) and a functionalized-multiwalled carbon nanotube (f-MWNT) nano-composite with high conductivity and durability. The CMC-S/MWNT nanocomposite was impregnated on a glassy carbon electrode (GCE) to construct the non-enzymatic and mediator-free electrochemical sensing probe for trace detection of As(iii) ions. The fabricated CMC-S/MWNT nanocomposite was characterized by FTIR, SEM, TEM, and XPS. Under the optimized experimental conditions, the sensor exhibited the lowest detection limit of 0.024 nM, a high sensitivity (69.93 μA nM-1 cm-2) with a good linear relationship in the range of 0.2-90 nM As(iii) concentration. The sensor demonstrated strong repeatability, with the current response continuing at 84.52% after 28 days of use, in addition to good selectivity for the determination of As(iii). Additionally, with recovery ranging from 97.2% to 107.2%, the sensor demonstrated comparable sensing capability in tap water, sewage water, and mixed fruit juice. The electrochemical sensor for detecting trace levels of As(iii) in actual samples is anticipated to be produced by this effort and is expected to possess great selectivity, good stability, and sensitivity.

Chitosan/Starch-Based Active Packaging Film with N, P-Doped Carbon Dots for Meat Packaging

Nitrogen, phosphorus-doped green-tea-derived carbon dots (NP-CDs) incorporated chitosan/starch (Chi/St) based multifunctional nanocomposite films were prepared. FE-SEM images verified a homogeneous distribution of CDs with minimum aggregation in the fabricated films. Incorporating NP-CDs led to enhanced UV-light blocking (93.1% of UV-A and ∼99.7% of UV-B) without significantly affecting the films' water transparency and water vapor permeability. Besides, incorporating NP-CDs into the Chi/St films enhanced antioxidant activity (98.0% for ABTS and 71.4% for DPPH) and displayed strong antibacterial activity against L. monocytogenes, E. coli, and S. aureus. Wrapping the meat in the prepared film and storing it at 20 °C has been shown to reduce bacterial growth (less than 2.5 Log CFU/g after 48 h) without significantly altering the actual color of the wrapped meat. The Chi/St film loaded with NP-CD has high potential as an active packaging material to ensure safety and extend the shelf life of meat products.

Characterization of Biodegradable Films Made from Taro Peel (Colocasia esculenta) Starch

Studies of renewable polymers have highlighted starch’s role to replace petroleum-based components to produce biodegradable films with plastic-like qualities. In this study, the novelty of taro peel starch (TPS) to produce such films using the casting technique is reported for the first time. A response surface method (RSM) approach was employed to optimize different concentrations of TPS (2.5−3.5%, w/w) and glycerol (25−35%, w/w) and investigate their effects on the physico-mechanical and water barrier properties of TPS films. TPS films showed a positive linear effect (p < 0.05) for thickness (0.058−0.088 mm), opacity (1.95−2.67), water vapor permeability (0.06−0.09 g∙m/m2∙kPa∙h), and cubic effect (p < 0.05) for moisture content (0.58−1.57%), which were linked to high starch concentrations when plasticized with glycerol. X-ray diffraction analysis of TPS films depicted “amorphous”-type crystalline structure peaks at 19.88°, while the thermogravimetric analysis of the film samples exhibited 75−80% of the weight loss of TPS film in the second phase between temperatures of 300 °C to 400 °C. All films exhibited homogenous, transparent surfaces with flexibility, and completely degraded in 5 days in simulated river water and composting soil environments, which confirmed TPS as a promising film polymer in food packaging.

Polysaccharide-Based Biodegradable Films: An Alternative in Food Packaging

Packaging can mitigate the physical, chemical, and microbiological phenomena that affects food products’ quality and acceptability. However, the use of conventional packaging from non-renewable fossil sources generates environmental damage caused by the accumulation of non-biodegradable waste. Biodegradable films emerge as alternative biomaterials which are ecologically sustainable and offer protection and increase food product shelf life. This review describes the role of biodegradable films as packaging material and their importance regarding food quality. The study emphasizes polysaccharide-based biodegradable films and their use in foods with different requirements and the advances and future challenges for developing intelligent biodegradable films. In addition, the study explores the importance of the selection of the type of polysaccharide and its combination with other polymers for the generation of biodegradable films with functional characteristics. It also discusses additives that cause interactions between components and improve the mechanical and barrier properties of biodegradable films. Finally, this compilation of scientific works shows that biodegradable films are an alternative to protecting perishable foods, and studying and understanding them helps bring them closer to replacing commercial synthetic packaging.

Recent advances in carrageenan-based films for food packaging applications

In order to solve the increasingly serious environmental problems caused by plastic-based packaging, carrageenan-based films are drawing much attentions in food packaging applications, due to low cost, biodegradability, compatibility, and film-forming property. The purpose of this article is to present a comprehensive review of recent developments in carrageenan-based films, including fabrication strategies, physical and chemical properties and novel food packaging applications. Carrageenan can be extracted from red algae mainly by hydrolysis, ultrasonic-assisted and microwave-assisted extraction, and the combination of multiple extraction methods will be future trends in carrageenan extraction methods. Carrageenan can form homogeneous film-forming solutions and fabricate films mainly by direct coating, solvent casting and electrospinning, and mechanism of film formation was discussed in detail. Due to the inherent limitations of the pure carrageenan film, physical and chemical properties of carrageenan films were enhanced by incorporation with other compounds. Therefore, carrageenan-based films can be widely used for extending the shelf life of food and monitoring the food freshness by inhibiting microbial growth, reducing moisture loss and the respiration, etc. This article will provide useful guidelines for further research on carrageenan-based films.

Review on biopolymers and composites - Evolving material as adsorbents in removal of environmental pollutants

The presence of pollutants and toxic contaminants in water sources makes it unfit to run through. Though various conventional techniques are on deck, development of new technologies are vital for wastewater treatment and recycling. Polymers have been intensively utilized recently in many industries owing to their unique characteristics. Biopolymers resembles natural alternative to synthetic polymers that can be prepared by linking the monomeric units covalently. Despite the obvious advantages of biopolymers, few reviews have been conducted. This review focuses on biopolymers and composites as suitable adsorbent material for removing pollutants present in environment. The classification of biopolymers and their composites based on the sources, methods of preparation and their potential applications are discussed in detail. Biopolymers have the potentiality of substituting conventional adsorbents due to its unique characteristics. Biopolymer based membranes and effective methods of utilization of biopolymers as suitable adsorbent materials are also briefly elaborated. The mechanism of biopolymers and their membrane-based adsorption has been briefly reviewed. In addition, the methods of regeneration and reuse of used biopolymer based adsorbents are highlighted. The comprehensive content on fate of biopolymer after adsorption is given in brief. Finally, this review concludes the future investigations in recent trends in application of biopolymer in various fields in view of eco-friendly and economic perspectives.

A Comprehensive Characterization of Biodegradable Edible Films Based on Potato Peel Starch Plasticized with Glycerol

Potatoes are a source of starch, which is an eco-friendly alternative to petrochemicals in plastic production. Increasing potato production also creates agricultural waste that could be converted to potato peel starch (PPS) and developed as films. A response surface method approach was employed to optimize the bioconversion of PPS (2, 4, and 6% w/v) and compared with carboxymethyl cellulose (CMC)-based films. The microstructure analysis of PPSF showed increased thickness, decreased swelling power, water solubility, and vapor permeability, which were linked to increased molecular interactions as a function of PPS increments. However, low-starch PPSF exhibited high transparency, good mechanical properties, and thermal stability (high melting temperature), pliability, and accelerated seawater and soil biodegradation (~90%: 20 and 50 days, respectively). All films exhibited thermal stability at >100 °C and retained similar amorphous characteristics, evidenced by their flexibility, which confirmed the potential use for PPS in packaging perishable and cooled foods.

Bio-nanocomposite edible coatings based on arrowroot starch/cellulose nanocrystals/carnauba wax nanoemulsion containing essential oils to preserve quality and improve shelf life of strawberry

This study investigated the effects of bio-nanocomposite coatings developed using arrowroot starch (AA), cellulose nanocrystals (CNC), carnauba wax nanoemulsion (CWN), and Cymbopogon martinii and Mentha spicata essential oils (CEO and MEO, respectively) on the physicochemical, microbiological, bioactive, antioxidant, and aromatic characteristics of strawberries cv. 'Oso Grande' in refrigerated storage for 12 days. The coatings improved the shelf life and stability of strawberries, minimizing their weight loss (2.6-3.9 %), as well as changes in color and texture (except for those coated with CEO), titratable acidity, pH, soluble solids, anthocyanins, phenolic compounds, ascorbic acid content, and antioxidant activity compared with uncoated control strawberries. The bio-nanocomposite coatings containing MEO and CEO also exhibited antimicrobial activity, reduced visible fungal deterioration (40-60 %), and reduced microbial load (3.59-4.03 log CFU g^-1 for mesophilic aerobic bacteria and 4.45-5.22 log CFU g^-1 for fungi and yeast) during storage. They also significantly reduced the severity of decay caused by inoculation with Botrytis cinerea or Rhizopus stolonifer. The coatings altered the volatile profile of the fruits during storage, decreasing aldehyde and alcohol concentrations and increasing ester concentrations. Thus, these bio-nanocomposite coatings, especially those containing MEO, can be used as antimicrobial coating materials to preserve the post-harvest quality of fresh strawberries.

Development of halochromic indicator film based on arrowroot starch/iota-carrageenan using Kyoho skin extract to monitor shrimp freshness

Increasing trends in food safety awareness drive consumer demands for fresher healthier diets and has led to the development of low-cost pH-sensitive indicator films to evaluate deterioration levels in fresh foods. Arrowroot starch/iota-carrageenan-based films were combined with 10, 30, 50% Kyoho skin extract (KSE) to produce indicator films with halochromic abilities. The KSE indicator films were characterized based on their physico-mechanical, functional, and crystallinity properties; thermal stability; and their pH-dependent color changes in in situ anthocyanin-based monitoring of shrimp freshness. All KSE indicator films displayed compact structure under scanning electron microscope analysis and increased tensile strength, exhibited UV-vis barrier ability, and presented low water wettability. Moreover, FTIR signaled strong hydrogen bond interactions among polymers and KSE that strengthened peak crystallinity in XRD analysis and lowered weight loss at melting temperature, which indicated thermal stability of the indicator films. Furthermore, pH-sensitivity of the indicator films integrated with natural KSE anthocyanin demonstrated color changes from purple to red under acidic conditions, purple to green in an ammonium environment, and yellow appeared in high alkaline conditions. Finally, this study demonstrated the food packaging and halochromic capacity of biopolymer-based pH-sensitivity of the KSE indicator films in real-time monitoring of shrimp at room storage temperatures.

Preparation and Characterization of Biodegradable κ-Carrageenan Based Anti-Bacterial Film Functionalized with Wells-Dawson Polyoxometalate

In the present study, an anti-bacterial film (Carr/POM film) was prepared through the incorporation of Wells-Dawson polyoxometalate K₆[Mo₁₈O₆₂P₂] into κ-carrageenan-based polymers using the tape-casting method. The mechanical properties, thermal stability, and morphology of the prepared film were characterized. The obtained results showed that incorporation of K₆[Mo₁₈O₆₂P₂] significantly affected the morphology and structure of the films. Moreover, the polyoxometalate-based film demonstrated desirable bactericidal activity against Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive). Carr/POM (@8 mg/mL) film resulted in an obvious inhibition zone around the film in Kirby-Bauer disk diffusion test, which could also remove 99% of S. aureus and E. coli on plastic, glass, and stainless steel. In addition, this anti-bacterial film also demonstrated good biodegradability, which could be decomposed in soil in around 1 week. In conclusion, the polyoxometalate-based film showed good anti-bacterial property against food-borne pathogenic microbes, suggesting the prepared film has great potential to be developed as promising food packaging.

Progress in Starch-Based Materials for Food Packaging Applications

The food packaging sector generates large volumes of plastic waste due to the high demand for packaged products with a short shelf-life. Biopolymers such as starch-based materials are a promising alternative to non-renewable resins, offering a sustainable and environmentally friendly food packaging alternative for single-use products. This article provides a chronology of the development of starch-based materials for food packaging. Particular emphasis is placed on the challenges faced in processing these materials using conventional processing techniques for thermoplastics and other emerging techniques such as electrospinning and 3D printing. The improvement of the performance of starch-based materials by blending with other biopolymers, use of micro- and nano-sized reinforcements, and chemical modification of starch is discussed. Finally, an overview of recent developments of these materials in smart food packaging is given.

Preparation and Characterization of Super-Absorbing Gel Formulated from κ-Carrageenan-Potato Peel Starch Blended Polymers

κ-carrageenan is useful for its superior gelling, hydrogel, and thickening properties. The purpose of the study was to maximize the hydrogel properties and water-absorbing capacity of κ-carrageenan by blending it with starch from potato peels to be used as safe and biodegradable water-absorbent children’s toys. The prepared materials were analyzed using FTIR and Raman spectroscopy to analyze the functional groups. Results showed that there was a shift in the characteristic peaks of starch and κ-carrageenan, which indicated their proper reaction during blend formation. In addition, samples show a peak at 1220 cm⁻¹ corresponding to the ester sulfate groups, and at 1670 cm⁻¹ due to the carbonyl group contained in D-galactose. SEM micrographs showed the presence of rough surface topology after blending the two polymers, with the appearance of small pores. In addition, the presence of surface cracks indicates the biodegradability of the prepared membranes that would result after enzymatic treatment. These results are supported by surface roughness results that show the surface of the κ-carrageenan/starch membranes became rougher after enzymatic treatment. The hydrophilicity of the prepared membranes was evaluated from contact angle (CA) measurements and the swelling ratio. The swelling ratio of the prepared membranes increased gradually as the starch ratio increased, reaching 150%, while the water-uptake capacity increased from 48 ± 4% for plain κ-carrageenan to 150 ± 5% for 1:2 κ-carrageenan/starch blends. The amylase enzyme showed an effective ability to degrade both the plain κ-carrageenan and κ-carrageenan/starch membranes, and release glucose units for up to 236 and 563, respectively. According to these results, these blends could be effectively used in making safe and biodegradable molded toys with superior water-absorbing capabilities.