Characterization of potential cellulose fiber from cattail fiber: A study on micro/nano structure and other properties

Extraction and characterization of nanocellulose from cattail leaves: Morphological, microstructural and thermal properties

Hydrogen peroxide combined with acid treatment demonstrates its respective characteristics for the separation of lignocellulosic biomass. Herein, holocellulose was extracted from Cattail leaves (CL) by a two-step treatment with alkali and hydrogen peroxide-acetic acid (HPAA). Then carboxylated nanocellulose was hydrolyzed with a mixed organic/inorganic acid. The chemical composition of the holocellulose and the physicochemical properties of the separated carboxylated nanocellulose were comparable. Carboxyl groups were introduced on the nanocellulose as a result of the esterification process with citric acid (CA), which endows the nanocellulose with high thermal stability (315-318 °C) and good light transmission (>80 %). Furthermore, morphological analyses revealed that nanocellulose had a spider-web-like structure with diameter between 5 and 20 nm.

Utilization of Waste Natural Fibers Mixed with Polylactic Acid (PLA) Bicomponent Fiber: Incorporating Kapok and Cattail Fibers for Nonwoven Medical Textile Applications

Disposable surgical gowns are usually made from petroleum-based synthetic fibers that do not naturally decompose, impacting the environment. A promising approach to diminish the environmental impact of disposable gowns involves utilizing natural fibers and/or bio-based synthetic fibers. In this study, composite webs from polylactic acid (PLA) bicomponent fiber and natural fibers, cattail and kapok fibers, were prepared using the hot press method. Only the sheath region of the PLA bicomponent fiber melted, acting as an adhesive that enhanced the strength and reduced the thickness of the composite web compared with its state before hot pressing. The mechanical and physical properties of these composite webs were evaluated. Composite webs created from kapok fibers displayed a creamy yellowish-white color, while those made from cattail fibers showed a light yellowish-brown color. Additionally, the addition of natural fibers endowed the composite webs with hydrophobic properties. The maximum natural fiber content, at a ratio of 30:70 (natural fiber to PLA fiber), can be incorporated while maintaining proper water vapor permeability and mechanical properties. This nonwoven material presents an alternative with the potential to replace petroleum-based surgical gowns.

Compressive Properties of Polyurethane Fiber Mattress Filling Material

There is an inevitable trend toward exploring new, environmentally friendly fibers that can be used as raw material for mattresses with moderate hardness and air-permeable characteristics. Ethylene-propylene side by side (ES), high-shrinkage fibers, and thermoplastic polyester elastomer (TPEE) chips were introduced into polyethylene glycol terephthalate (PET)/polybutylene terephthalate (PBT) chip by melt blending to modify PET/PBT fiber. The modified PET/PBT (hereinafter referred to as PLON) is more suitable for mattress filling material than PET/PBT. To explore the compressive properties of PLON cushion made of PLON fiber and expand the scope of the PLON cushion’s application, a layered hardness test, hardness classification test and variance analysis were used to comprehensively evaluate the surface hardness, core hardness, bottom hardness and hardness classification of the mattress made of PLON cushion. The conclusions are: (1) The materials of the support layer have a significant effect on the hardness grade S. The hardness of the mattress with PLON as the support layer is between the spring and the coir; (2) when PLON is used as the material of the support layer, it possesses higher supporting force than coir and the characteristics of light weight and high resilience, which coir does not have; it is also softer than a spring mattress. As cushion material, it provides higher support for mattresses than foam. Practical applications, densities and structure were clarified through the above research, with implications for broader applications for PLON blocks in mattress products.

Invasive plants as biosorbents for environmental remediation: a review

Water contamination is an environmental burden for the next generations, calling for advanced methods such as adsorption to remove pollutants. For instance, unwanted biowaste and invasive plants can be converted into biosorbents for environmental remediation. This would partly solve the negative effects of invasive plants, estimated at 120 billion dollars in the USA. Here we review the distribution, impact, and use of invasive plants for water treatment, with emphasis on the preparation of biosorbents and removal of pollutants such as cadmium, lead, copper, zinc, nickel, mercury, chromate, synthetic dyes, and fossil fuels. Those biosorbents can remove 90-99% heavy metals from aqueous solutions. High adsorption capacities of 476.190 mg/g for synthetic dyes and 211 g/g for diesel oils have been observed. We also discuss the regeneration of these biosorbents.