1
|
Soylak M, Aksu B, Elzain Hassan Ahmed H. Carboxylated nanodiamonds@CuAl 2O 4@TiO 2 nanocomposite for the dispersive micro-solid phase extraction of nickel at trace levels from food samples. Food Chem 2024; 445:138733. [PMID: 38387322 DOI: 10.1016/j.foodchem.2024.138733] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/10/2023] [Revised: 01/12/2024] [Accepted: 02/08/2024] [Indexed: 02/24/2024]
Abstract
Heavy metal pollution poses a significant health risk, necessitating regular environmental monitoring for public safety. Elevated nickel concentrations can disrupt ecosystems and impact human health. This study presents a nano-sorbent can be used for dispersive micro-solid phase extraction of nickel. The nano-sorbent was characterized using FT-IR, XRD, FESEM, BET, and BJH. It demonstrated remarkable efficiency due to its nanoscale properties, optimizing results in exceptional extraction performance with minimal interference from common ions. A flame atomic absorption spectrometer was utilized for all measurements. It has a low LOD (0.29 μg L-1) and RSDs% (7.3 % and 6 % intra-day and inter-day, respectively), minimal variation, and a precisely accurate correlation (0.997). It can be used on black tea, green tea, carrots, coffee beans, tuna fish, herring fish, tobacco, soil, natural water, and wastewater samples. The accuracy of the method was assessed by analyzing TMDA-64.3 fortified water and NIST 1573a tomato leaves certified reference materials.
Collapse
Affiliation(s)
- Mustafa Soylak
- Erciyes University, Faculty of Sciences, Department of Chemistry, 38039 Kayseri, Turkey; Technology Research & Application Center (ERU-TAUM), Erciyes University, 38039 Kayseri, Turkey; Turkish Academy of Sciences (TUBA), Cankaya, Ankara, Turkey.
| | - Birgul Aksu
- Erciyes University, Faculty of Sciences, Department of Chemistry, 38039 Kayseri, Turkey; Technology Research & Application Center (ERU-TAUM), Erciyes University, 38039 Kayseri, Turkey
| | - Hassan Elzain Hassan Ahmed
- Erciyes University, Faculty of Sciences, Department of Chemistry, 38039 Kayseri, Turkey; Technology Research & Application Center (ERU-TAUM), Erciyes University, 38039 Kayseri, Turkey; Sudan Atomic Energy Commission (SAEC) - Chemistry and Nuclear Physics Institute, Khartoum, Sudan
| |
Collapse
|
2
|
Khan I, Ali N, Jing Z, Khan A, Ali F, Hhan F, Kareem A, Sun Y, Al Balushi RA, Al-Hinaai MM, Al-Harthy T, Nawaz A. Biopolymer‑carbonaceous composites, progress, and adsorptive mitigation of water pollutants. Int J Biol Macromol 2024; 274:133379. [PMID: 38936571 DOI: 10.1016/j.ijbiomac.2024.133379] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/05/2024] [Revised: 06/01/2024] [Accepted: 06/21/2024] [Indexed: 06/29/2024]
Abstract
Chitin is the second most abundant natural biopolymer, which is composed of N-acetyl glucosamine units linked by β-(1 → 4) Chitosan is an N-deacetylated product of chitin. Properties of chitosan and chitin, such as biocompatibility, non-toxic nature, and biodegradability, make them successful alternatives for energy and environmental applications. However, their low mechanical properties, small surface area, reduced thermal properties, and greater pore volume restrict the potential for adsorption applications. Multiple investigations have demonstrated that these flaws can be prevented by fabricating chitosan and chitin with carbon-based composites. This review presents a comprehensive analysis of the fabrication of chitosan/chitin carbon-based materials. Furthermore, this review examines the prevalent technologies of functionalizing chitosan/chitin biopolymers and applications of chitin and chitosan as well as chitosan/chitin carbon-based composites, in various environmental fields (mitigating diverse water contaminants and developing biosensors). Also, the subsequent regeneration and reuse of adsorbents were also discussed. Finally, we summarize a concise overview of the difficulties and potential opportunities associated with the utilization of chitosan/chitin carbon-based composites as adsorbents to remove water contaminants.
Collapse
Affiliation(s)
- Ibrahim Khan
- National & Local Joint Engineering Research Center for Mineral Salt Deep Utilization, Huaiyin Institute of Technology, Huai'an 223003, China
| | - Nisar Ali
- National & Local Joint Engineering Research Center for Mineral Salt Deep Utilization, Huaiyin Institute of Technology, Huai'an 223003, China; Department of Basic and Applied Sciences, College of Applied and Health Sciences, A'Sharqiyah University, P.O. Box 42, Ibra P.O. 400, Sultanate of Oman.
| | - Zhang Jing
- National & Local Joint Engineering Research Center for Mineral Salt Deep Utilization, Huaiyin Institute of Technology, Huai'an 223003, China.
| | - Adnan Khan
- Institute of Chemical Sciences, University of Peshawar, Khyber Pakhtunkhwa 25120, Pakistan
| | - Farman Ali
- Department of Chemistry, Hazara University, Mansehra 21300, Pakistan
| | - Fawad Hhan
- National & Local Joint Engineering Research Center for Mineral Salt Deep Utilization, Huaiyin Institute of Technology, Huai'an 223003, China
| | - Abdul Kareem
- National & Local Joint Engineering Research Center for Mineral Salt Deep Utilization, Huaiyin Institute of Technology, Huai'an 223003, China
| | - Yangshuo Sun
- National & Local Joint Engineering Research Center for Mineral Salt Deep Utilization, Huaiyin Institute of Technology, Huai'an 223003, China
| | - Rayya Ahmed Al Balushi
- Department of Basic and Applied Sciences, College of Applied and Health Sciences, A'Sharqiyah University, P.O. Box 42, Ibra P.O. 400, Sultanate of Oman
| | - Mohammad M Al-Hinaai
- Department of Basic and Applied Sciences, College of Applied and Health Sciences, A'Sharqiyah University, P.O. Box 42, Ibra P.O. 400, Sultanate of Oman
| | - Thuraya Al-Harthy
- Department of Basic and Applied Sciences, College of Applied and Health Sciences, A'Sharqiyah University, P.O. Box 42, Ibra P.O. 400, Sultanate of Oman
| | - Arif Nawaz
- Henan Key Laboratory of Photovoltaic Materials, School of Physics, Henan Normal University, Xinxiang 453007, China
| |
Collapse
|
3
|
Miron A, Iordache TV, Valente AJM, Durães LMR, Sarbu A, Ivan GR, Zaharia A, Sandu T, Iovu H, Chiriac AL. Chitosan-Based Beads Incorporating Inorganic-Organic Composites for Copper Ion Retention in Aqueous Solutions. Int J Mol Sci 2024; 25:2411. [PMID: 38397088 PMCID: PMC10889537 DOI: 10.3390/ijms25042411] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/26/2024] [Revised: 02/12/2024] [Accepted: 02/14/2024] [Indexed: 02/25/2024] Open
Abstract
In recent years, there has been a challenging interest in developing low-cost biopolymeric materials for wastewater treatment. In the present work, new adsorbents, based on different types of chitosan (commercial, commercial chitin-derived chitosan and chitosan synthesized from shrimp shell waste) and inorganic-organic composites have been evaluated for copper ions removal. The efficacy of the synthesis of chitosan-based composite beads has been determined by studying various characteristics using several techniques, including FTIR spectroscopy, X-ray diffraction, porosimetry (N2 adsorption), and scanning electron microscopy (SEM). Adsorption kinetics was performed using different adsorption models to determine the adsorption behavior of the materials in the aqueous media. For all composite beads, regardless of the type of chitosan used, good capacity to remove copper ions from simulated waters was observed (up to 17 mg/g), which proves that the new materials hold potential for heavy metal retention. However, the adsorption efficiency was influenced by the type of chitosan used. Thus, for the series where commercial chitosan (CC) was used, the removal efficiency was approximately 29%; for the series with chitosan obtained from commercial chitin (SC), the removal efficiency was approximately 34%; for the series with chitosan enriched with CaCO3 (SH), the removal efficiency was approximately 52%.
Collapse
Affiliation(s)
- Andreea Miron
- Advanced Polymer Materials and Polymer Recycling Group, National Institute for Research & Development in Chemistry and Petrochemistry ICECHIM, Spl. Independentei 202, 6th District, 060021 Bucharest, Romania; (A.M.); (T.-V.I.); (A.S.); (G.R.I.); (A.Z.); (T.S.)
- Advanced Polymer Materials Group, National University of Science and Technology Politehnica Bucharest, 1–7 Gh. Polizu Street, 011061 Bucharest, Romania;
| | - Tanta-Verona Iordache
- Advanced Polymer Materials and Polymer Recycling Group, National Institute for Research & Development in Chemistry and Petrochemistry ICECHIM, Spl. Independentei 202, 6th District, 060021 Bucharest, Romania; (A.M.); (T.-V.I.); (A.S.); (G.R.I.); (A.Z.); (T.S.)
| | - Artur J. M. Valente
- CQC-IMS, Department of Chemistry, University of Coimbra, Rua Larga, 3004-535 Coimbra, Portugal;
| | - Luisa Maria Rocha Durães
- CIEPQPF, Department of Chemical Engineering, University of Coimbra, Rua Sílvio Lima, 3030-790 Coimbra, Portugal;
| | - Andrei Sarbu
- Advanced Polymer Materials and Polymer Recycling Group, National Institute for Research & Development in Chemistry and Petrochemistry ICECHIM, Spl. Independentei 202, 6th District, 060021 Bucharest, Romania; (A.M.); (T.-V.I.); (A.S.); (G.R.I.); (A.Z.); (T.S.)
| | - Georgeta Ramona Ivan
- Advanced Polymer Materials and Polymer Recycling Group, National Institute for Research & Development in Chemistry and Petrochemistry ICECHIM, Spl. Independentei 202, 6th District, 060021 Bucharest, Romania; (A.M.); (T.-V.I.); (A.S.); (G.R.I.); (A.Z.); (T.S.)
| | - Anamaria Zaharia
- Advanced Polymer Materials and Polymer Recycling Group, National Institute for Research & Development in Chemistry and Petrochemistry ICECHIM, Spl. Independentei 202, 6th District, 060021 Bucharest, Romania; (A.M.); (T.-V.I.); (A.S.); (G.R.I.); (A.Z.); (T.S.)
| | - Teodor Sandu
- Advanced Polymer Materials and Polymer Recycling Group, National Institute for Research & Development in Chemistry and Petrochemistry ICECHIM, Spl. Independentei 202, 6th District, 060021 Bucharest, Romania; (A.M.); (T.-V.I.); (A.S.); (G.R.I.); (A.Z.); (T.S.)
| | - Horia Iovu
- Advanced Polymer Materials Group, National University of Science and Technology Politehnica Bucharest, 1–7 Gh. Polizu Street, 011061 Bucharest, Romania;
| | - Anita-Laura Chiriac
- Advanced Polymer Materials and Polymer Recycling Group, National Institute for Research & Development in Chemistry and Petrochemistry ICECHIM, Spl. Independentei 202, 6th District, 060021 Bucharest, Romania; (A.M.); (T.-V.I.); (A.S.); (G.R.I.); (A.Z.); (T.S.)
| |
Collapse
|
4
|
Jiang R, Zhu HY, Zang X, Fu YQ, Jiang ST, Li JB, Wang Q. A review on chitosan/metal oxide nanocomposites for applications in environmental remediation. Int J Biol Macromol 2024; 254:127887. [PMID: 37935288 DOI: 10.1016/j.ijbiomac.2023.127887] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/06/2023] [Revised: 10/28/2023] [Accepted: 11/02/2023] [Indexed: 11/09/2023]
Abstract
A cleaner and safer environment is one of the most important requirements in the future. It has become increasingly urgent and important to fabricate novel environmentally-friendly materials to remove various hazardous pollutants. Compared with traditional materials, chitosan is a more environmentally friendly material due to its abundance, biocompatibility, biodegradability, film-forming ability and hydrophilicity. As an abundant of -NH2 and -OH groups on chitosan molecular chain could chelate with all kinds of metal ions efficiently, chitosan-based materials hold great potential as a versatile supporting matrix for metal oxide nanomaterials (MONMs) (TiO2, ZnO, SnO2, Fe3O4, etc.). Recently, many chitosan/metal oxide nanomaterials (CS/MONMs) have been reported as adsorbents, photocatalysts, heterogeneous Fenton-like agents, and sensors for potential and practical applications in environmental remediation and monitoring. This review analyzed and summarized the recent advances in CS/MONMs composites, which will provide plentiful and meaningful information on the preparation and application of CS/MONMs composites for wastewater treatment and help researchers to better understand the potential of CS/MONMs composites for environmental remediation and monitoring. In addition, the challenges of CS/MONM have been proposed.
Collapse
Affiliation(s)
- Ru Jiang
- Institute of Environmental Engineering Technology, Taizhou University, Taizhou, Zhejiang 318000, PR China; Zhejiang Provincial Key Laboratory of Plant Evolutionary Ecology and Conservation, Taizhou University, Taizhou, Zhejiang 318000, PR China; Taizhou Key Laboratory of Biomass Functional Materials Development and Application, Taizhou University, Taizhou, Zhejiang 318000, PR China
| | - Hua-Yue Zhu
- Institute of Environmental Engineering Technology, Taizhou University, Taizhou, Zhejiang 318000, PR China; Zhejiang Provincial Key Laboratory of Plant Evolutionary Ecology and Conservation, Taizhou University, Taizhou, Zhejiang 318000, PR China; Taizhou Key Laboratory of Biomass Functional Materials Development and Application, Taizhou University, Taizhou, Zhejiang 318000, PR China.
| | - Xiao Zang
- Institute of Environmental Engineering Technology, Taizhou University, Taizhou, Zhejiang 318000, PR China
| | - Yong-Qian Fu
- Zhejiang Provincial Key Laboratory of Plant Evolutionary Ecology and Conservation, Taizhou University, Taizhou, Zhejiang 318000, PR China; Taizhou Key Laboratory of Biomass Functional Materials Development and Application, Taizhou University, Taizhou, Zhejiang 318000, PR China
| | - Sheng-Tao Jiang
- Institute of Environmental Engineering Technology, Taizhou University, Taizhou, Zhejiang 318000, PR China; Zhejiang Provincial Key Laboratory of Plant Evolutionary Ecology and Conservation, Taizhou University, Taizhou, Zhejiang 318000, PR China
| | - Jian-Bing Li
- Environmental Engineering Program, University of Northern British Columbia, Prince George, British Columbia V2N 4Z9, Canada
| | - Qi Wang
- School of Environmental Science and Engineering, Zhejiang Gongshang University, Hangzhou, Zhejiang 310018, PR China.
| |
Collapse
|
5
|
Guo H, Qin Q, Chang JS, Lee DJ. Modified alginate materials for wastewater treatment: Application prospects. BIORESOURCE TECHNOLOGY 2023; 387:129639. [PMID: 37549712 DOI: 10.1016/j.biortech.2023.129639] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/08/2023] [Revised: 08/03/2023] [Accepted: 08/04/2023] [Indexed: 08/09/2023]
Abstract
Sodium alginate is a natural macromolecule widely used because of its abundance, low cost of acquisition, and rich hydroxyl and carboxyl groups in the matrix. The physical modification of sodium alginate can be made by blending it with polymer materials. The so-yielded alginate complex is commonly unstable in an aqueous environment due to alginate backbones' high hydrophilicity. The chemical modification can remove its hydrophilic groups and introduce special functional groups or polymers onto the alginate backbones to provide excess reaction sites for specific reactions and effective complexation sites for accommodating antibiotics, dyes, heavy metal ions, and radioactive elements. Sodium alginate has been used in water treatment engineering under revised modification protocols. This article also reviews the latest modification protocols for sodium alginate and outlines the novel application of the modified materials. The limitations of modified sodium alginate materials are described, and research prospects are put forward.
Collapse
Affiliation(s)
- Hongliang Guo
- College of Forestry, Northeast Forestry University, Harbin 150040, China
| | - Qing Qin
- College of Forestry, Northeast Forestry University, Harbin 150040, China
| | - Jo-Shu Chang
- Research Center for Smart Sustainable Circular Economy, Tunghai University, Taichung 407, Taiwan; Department of Chemical Engineering, National Cheng Kung University, Tainan, Taiwan; Department of Chemical and Materials Engineering, Tunghai University, Taichung 407, Taiwan
| | - Duu-Jong Lee
- Department of Mechanical Engineering, City University of Hong Kong, Kowloon Tong, Hong Kong; Department of Chemical Engineering & Materials Sci., Yuan Ze University, Chung-li 32003, Taiwan.
| |
Collapse
|
6
|
Fila D, Kołodyńska D. Fixed-Bed Column Adsorption Studies: Comparison of Alginate-Based Adsorbents for La(III) Ions Recovery. MATERIALS (BASEL, SWITZERLAND) 2023; 16:1058. [PMID: 36770065 PMCID: PMC9920093 DOI: 10.3390/ma16031058] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/13/2022] [Revised: 01/02/2023] [Accepted: 01/22/2023] [Indexed: 06/18/2023]
Abstract
The paper investigated the adsorption of the packed-bed column with the alginate-based adsorbents (ALG-based adsorbents) such as alginate-biochar, alginate-clinoptilolite, alginate-lignin, and alginate-cellulose for La(III) ions' removal. Fixed-bed adsorption studies with various alginate-based adsorbents were carried out and compared to the La(III) ions adsorption. The columns were filled with ALG-based adsorbent beads of approximately 1.1 ± 0.005 mm spherical shapes. The effects of the inlet concentrations on the breakthrough curves were studied in terms of the adsorption performance of the ALG-based adsorbents. The experimental data were correlated with the Adams-Bohart, Yoon-Nelson, Thomas, and Wolborska models to determine the best operational parameters. Based on the comparison of R2 values, the Thomas and Yoon-Nelson models were found to be more suitable than the Adams-Bohart and Wolborska models. In the desorption study, the ALG-based adsorbents packed columns showed the maximum desorption of La(III) just after passing 100 cm3 of 1 mol/dm3 HCl. Overall, the results show that ALG-based adsorbents could be used for continuous recovery of La(III) ions from aqueous solutions and were not only cost-effective but also environmentally friendly.
Collapse
|
7
|
Reduced Graphene Oxide-Zinc Sulfide Nanocomposite Decorated with Silver Nanoparticles for Wastewater Treatment by Adsorption, Photocatalysis and Antimicrobial Action. Molecules 2023; 28:molecules28030926. [PMID: 36770591 PMCID: PMC9920792 DOI: 10.3390/molecules28030926] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/01/2022] [Revised: 01/05/2023] [Accepted: 01/13/2023] [Indexed: 01/18/2023] Open
Abstract
Reduced graphene oxide nanosheets decorated with ZnS and ZnS-Ag nanoparticles are successfully prepared via a facile one-step chemical approach consisting of reducing the metal precursors on a rGO surface. Prepared rGO-ZnS nanocomposite is employed as an adsorbent material against two model dyes: malachite green (MG) and ethyl violet (EV). The adsorptive behavior of the nanocomposite was tuned by monitoring some parameters, such as the time of contact between the dye and the adsorbent, and the adsorbent dose. Experimental data were also simulated with kinetic models to evaluate the adsorption behavior, and the results confirmed that the adsorption of both dyes followed a pseudo 2nd order kinetic mode. Moreover, the adsorbent was also regenerated in a suitable media for both dyes (HCl for MG and ethanol for EV), without any significant loss in removal efficiency. Ag doped rGO-ZnS nanocomposite was also utilized as a photocatalyst for the degradation of the selected organic contaminant, resorcinol. The complete degradation of the phenolic compound was achieved after 60 min with 200 mg of rGO-ZnS-Ag nanocomposite under natural sunlight irradiation. The photocatalytic activity was studied considering some parameters, such as the initial phenol concentration, the photocatalyst loading, and the pH of the solution. The degradation kinetics of resorcinol was carefully studied and found to follow a linear Langmuir-Hinshelwood model. An additional advantage of rGO-ZnS and rGO-ZnS-Ag nanocomposites was antibacterial activity against Gram-negative bacterium, E. coli, and the results confirmed the significant performance of the nanocomposites in destroying harmful pathogens.
Collapse
|
8
|
Rizwan K, Babar ZB, Munir S, Arshad A, Rauf A. Recent advancements in engineered biopolymeric-nanohybrids: A greener approach for adsorptive-remediation of noxious metals from aqueous matrices. ENVIRONMENTAL RESEARCH 2022; 215:114398. [PMID: 36174757 DOI: 10.1016/j.envres.2022.114398] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/16/2022] [Revised: 09/14/2022] [Accepted: 09/18/2022] [Indexed: 06/16/2023]
Abstract
Industrial wastewater is causing serious health problems due to presence of large concentrations of toxic metals. Removal of these metals is still a big challenge using pristine natural biopolymers due to their low surface area, water solubility, and poor recovery. Developing biopolymeric composites with other materials has attained attention because they possess a high surface area and structural porosity, high reactivity, and less water solubility. In simple words, biopolymeric nanohybrids have great adsorption capacity for heavy metals. Biopolymeric materials are abundant, low cost, biodegradable, and possess different functional moieties (carboxyl, amine, hydroxyl, and carbonyl) which play a vital role to adsorb metal ions through various inter-linkages (i.e., electrostatic, hydrogen bonding, ion exchange, chelation, etc.). Biopolymeric nanohybrids have been proven a potent tool in environmental remediation such as the abatement of heavy metal ions from polluted water. Herein, we have reported the adsorption potential of various biopolymers (cellulose, chitosan, pectin, gelatin, and silk proteins) for the removal of heavy metals. This review discusses the suitability of biopolymeric nanohybrids as an adsorbent for heavy metals, their synthesis, modification, adsorption potential, and adsorption mechanism along with best fitted thermodynamic and kinetic models. The influence of pH, contact time, and adsorbent dose on adsorption potential has also been discussed in detail. Lastly, the challenges, research gaps and recommendations have been presented. This review concludes that biopolymers in combination with other materials such as metal-based nanoparticles, clay, and carbon-based materials are excellent materials to remove metallic ions from wastewater. Significant adsorption of heavy metals was obtained at a moderate pH (5-6). Contact time and adsorbent dose also affect the adsorption of heavy metals in certain ways. The Pseudo-first order model fits the data for the initial period of the first step of the reaction. Kinetic studies of different adsorption processes of various biopolymeric nanohybrids described that for majority of bionanohybrids, Pseudo-second order fitted the experimental data very well. Functionalized biopolymeric nanohybrids being biodegradable, environment friendly, cost-effective materials have great potential to adsorb heavy metal ions. These may be the future materials for environmental remediation.
Collapse
Affiliation(s)
- Komal Rizwan
- Department of Chemistry, University of Sahiwal, Sahiwal, 57000, Pakistan.
| | - Zaeem Bin Babar
- Institute of Environmental Sciences and Engineering (IESE), School of Civil and Environmental Engineering (SCEE), National University of Sciences and Technology (NUST), Islamabad, 44000, Pakistan
| | - Shahid Munir
- Institute of Energy and Environmental Engineering, University of the Punjab, Lahore, 54590, Pakistan
| | - Ali Arshad
- Institute of Energy and Environmental Engineering, University of the Punjab, Lahore, 54590, Pakistan
| | - Abdul Rauf
- Institute of Energy and Environmental Engineering, University of the Punjab, Lahore, 54590, Pakistan
| |
Collapse
|
9
|
Aden M, Elmi A, Husson J, Idriss S, Filiatre C, Knorr M. Silica-Supported Alginates From Djiboutian Seaweed as Biomass-Derived Materials for Efficient Adsorption of Ni(II). CHEMISTRY AFRICA 2022. [DOI: 10.1007/s42250-022-00527-w] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/13/2022]
|
10
|
Shehzad H, Farooqi ZH, Ahmed E, Sharif A, Ajmal M, Razzaq S, Naseer MU, Nazir MA, Batool M, Akram T, Nissa QU, Fatima A, Akbar L. Effective biosorption of Cu(II) using hybrid biocomposite based on N-maleated chitosan/calcium alginate/titania: Equilibrium sorption, kinetic and thermodynamic studies. Int J Biol Macromol 2022; 216:676-685. [PMID: 35810852 DOI: 10.1016/j.ijbiomac.2022.06.159] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/18/2022] [Revised: 05/27/2022] [Accepted: 06/25/2022] [Indexed: 11/16/2022]
Abstract
In this research work, a hybrid biocomposite based on N-maleated chitosan, amino-thiocarbamate functionalised calcium alginate and anhydrous Titania nanoparticles (NMC-MCA-TiO2) was fabricated. The study involves the one pot facile synthesis of N-maleated chitosan and amino-thiocarbamate functionalised alginate under moderate conditions. Sorbent was conditioned in the form of hydrogel beads and characterized through FT-IR and SEM analysis. Newly grafted functional groups could act as potential chelating sites for enhanced Cu(II) sorption. Modified biopolymers were organo-functionalised which provided excellent support for immobilization of Titania nanoparticles (TiO2) as inorganic filler. Kinetic data illustrated the manifestation of intrinsic chemisorption instead of simple bulk/film diffusion. Equilibrium sorption data fitted well with Freundlich adsorption model (R2 ≈ 0.99) which designated the heterogeneous nature of sorbent. Maximum sorption capacity of biosorbent was found 192 mg/g at 298 K and pH = 6.0. Standard Gibbs free energy change ∆Go (-21.53, -21.97, and - 22.42 kJ/mol), standard enthalpy change ∆Ho (5.12 kJ/mol) and standard entropy change ∆So (0.09 kJ/mol K-1) values suggested that the sorption process to be spontaneous and endothermic. The sorbent 3NMC-MCA-TiO2 could be competitive candidate for economical and rapid adsorptive removal of Cu(II) from dilute contaminated liquids.
Collapse
Affiliation(s)
- Hamza Shehzad
- School of Chemistry, University of the Punjab, Lahore 54590, Pakistan.
| | - Zahoor H Farooqi
- School of Chemistry, University of the Punjab, Lahore 54590, Pakistan.
| | - Ejaz Ahmed
- School of Chemistry, University of the Punjab, Lahore 54590, Pakistan
| | - Ahsan Sharif
- School of Chemistry, University of the Punjab, Lahore 54590, Pakistan
| | - Muhammad Ajmal
- Department of Chemistry, Division of Science and Technology, University of Education, Lahore, Pakistan
| | - Sana Razzaq
- School of Chemistry, University of the Punjab, Lahore 54590, Pakistan
| | - M Uzair Naseer
- School of Chemistry, University of the Punjab, Lahore 54590, Pakistan
| | - M Ahmad Nazir
- School of Chemistry, University of the Punjab, Lahore 54590, Pakistan
| | - Mehwish Batool
- School of Chemistry, University of the Punjab, Lahore 54590, Pakistan
| | - Tehreem Akram
- School of Chemistry, University of the Punjab, Lahore 54590, Pakistan
| | - Qamar Un Nissa
- School of Chemistry, University of the Punjab, Lahore 54590, Pakistan
| | - Amarah Fatima
- School of Chemistry, University of the Punjab, Lahore 54590, Pakistan
| | - Laiba Akbar
- School of Chemistry, University of the Punjab, Lahore 54590, Pakistan
| |
Collapse
|
11
|
Green Nanoparticle-Aided Biosorption of Nickel Ions Using Four Dry Residual Biomasses: A Comparative Study. SUSTAINABILITY 2022. [DOI: 10.3390/su14127250] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
The green synthesis of titanium dioxide nanoparticles was performed using the sol-gel method for their use in the modification of several agricultural biomasses (orange, lemon, cassava and yam peels) to evaluate the enhancement of adsorption capacity. To this end, different particle sizes (0.355, 0.5 and 1.0 mm) and initial solution pHs (2, 4 and 6) were assessed to identify the optimum conditions for further experimentation with the selected lignocellulosic materials. The defined conditions reporting the highest removal yields were used to perform adsorption experiments for chemically modified biosorbents. The biomaterials were characterized via elemental and bromatological analysis in order to quantify their composition. After the incorporation of TiO2 nanoparticles, the resulting biosorbents were characterized via FT-IR and SEM techniques. The results revealed that the pH solution significantly affects the nickel ion uptake, reaching the best performance at pH = 6 for all biomasses. Unmodified biomasses shown adsorption capacities between 18–20 mg/g. For chemically modified with TiO2 orange peels and yam peels biomass, the increase in adsorption capacities was 21.3 and 18.01 mg/g, respectively. For cassava and lemon peels chemically modified, it was found the increasing in adsorption capacities with values of 21.3 and 18.01 mg/g, respectively, which suggested that the incorporation of nanoparticles enhances adsorption capacities.
Collapse
|
12
|
Methacrylate-Based Polymeric Sorbents for Recovery of Metals from Aqueous Solutions. METALS 2022. [DOI: 10.3390/met12050814] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/01/2023]
Abstract
The industrialization and urbanization expansion have increased the demand for precious and rare earth elements (REEs). In addition, environmental concerns regarding the toxic effects of heavy metals on living organisms imposed an urgent need for efficient methods for their removal from wastewaters and aqueous solutions. The most efficient technique for metal ions removal from wastewaters is adsorption due to its reversibility and high efficiency. Numerous adsorbents were mentioned as possible metal ions adsorbents in the literature. Chelating polymer ligands (CPLs) with adaptable surface chemistry, high affinity towards targeted metal ions, high capacity, fast kinetics, chemically stable, and reusable are especially attractive. This review is focused on methacrylate-based magnetic and non-magnetic porous sorbents. Special attention was devoted to amino-modified glycidyl methacrylate (GMA) copolymers. Main adsorption parameters, kinetic models, adsorption isotherms, thermodynamics of the adsorption process, as well as regeneration of the polymeric sorbents were discussed.
Collapse
|
13
|
Nawaz I, Shehzad H, Ahmed E, Sharif A, Farooqi ZH, Din MI, Begum R, Irfan A, Liu Z, Zhou L, Ouyang J. Facile synthesis and adsorption characteristics of a hybrid composite based on ethyl acetoacetate modified chitosan/calcium alginate/TiO 2 for efficient recovery of Ni(II) from aqueous solution. Z PHYS CHEM 2022. [DOI: 10.1515/zpch-2021-3168] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
Abstract
Abstract
In this study, chemical modification of chitosan has been carried out using epichlorohydrin as crosslinking agent and ethyl acetoacetate as a modifier to graft acetoacetyl moiety. The said organo-functionalization on chitosan and sodium alginate not only offered a novel support for TiO2 immobilization but also enhanced sorption performance for Ni(II) recovery from aqueous medium. So, a composite consisting of acetoacetyl moiety grafted chitosan, sodium alginate and titanium oxide (EAA-MCS/TiO2) was prepared and characterized by fourier transform-infra red (FT-IR) spectroscopy and scanning electron microscopy (SEM). The hybrid composite (3EAA-MCS/TiO2) which had TiO2 to EAA-MCS mass ratio of 20.0% by weight showed maximum sorption efficiency. The formulated sorbent was conditioned in the form of hydrogel beads for operation. Isothermal sorption and kinetics studies were performed at pH = 6.0 to configure the nature of sorption. Pseudo-2nd order rate expression better explained the sorption kinetics and chemisorption is the predominant mode of uptake. Langmuir adsorption model better explained the sorption process (R
2 ∼ 0.99) and maximum monolayer sorption capacity (q
m
) at sorption/desorption dynamic equilibrium was computed as 403 mg/g at optimized pH.
Collapse
Affiliation(s)
- Imran Nawaz
- School of Chemistry , University of the Punjab , Lahore 54590 , Pakistan
| | - Hamza Shehzad
- School of Chemistry , University of the Punjab , Lahore 54590 , Pakistan
| | - Ejaz Ahmed
- School of Chemistry , University of the Punjab , Lahore 54590 , Pakistan
| | - Ahsan Sharif
- School of Chemistry , University of the Punjab , Lahore 54590 , Pakistan
| | - Zahoor H. Farooqi
- School of Chemistry , University of the Punjab , Lahore 54590 , Pakistan
| | - Muhammad Imran Din
- School of Chemistry , University of the Punjab , Lahore 54590 , Pakistan
| | - Robina Begum
- School of Chemistry , University of the Punjab , Lahore 54590 , Pakistan
| | - Ahmad Irfan
- Department of Chemistry, Faculty of Science , King Khalid University , P.O. Box 9004 , Abha 61413 , Saudi Arabia
- Research Center for Advanced Materials Science, King Khalid University , P.O. Box 9004 , Abha 61413 , Saudi Arabia
| | - Zhirong Liu
- School of Chemistry, Biology and Material Sciences , East China University of Technology , Nanchang , P. R. China
| | - Limin Zhou
- School of Chemistry, Biology and Material Sciences , East China University of Technology , Nanchang , P. R. China
| | - Jinbo Ouyang
- School of Chemistry, Biology and Material Sciences , East China University of Technology , Nanchang , P. R. China
| |
Collapse
|