Preparation of functionalized pectin through acylation with alkyl gallates: Experiments coupled with density functional theory

High methoxyl pectin grafted onto gallic acid by one- and two-pot redox-pair procedures

The aim of this research was to graft gallic acid (GA) onto high methoxyl pectin (HMP) through the redox-pair of ascorbic acid (Aa) and hydrogen peroxide (H2O2) with one- and two-pot procedures. The effectiveness of the both procedures and the chemical, physical and antioxidant properties of the obtained HMP-GA were evaluated. HMP-GAone-pot (23.3 ± 0.21 mg GA Equivalent (GAE)/g) and HMP-GAtwo-pot (32.3 ± 0.52 mg GAE/g) were best obtained at H2O2/Aa molar ratio-HMP/GA weight ratio of 9.0-0.5 and 16.0-0.5, respectively. The UV-Vis and FT-IR spectra and along with their derivative and thermal gravimetric analyses, revealed differences between HMP-GAone-pot and HMP-GAtwo-pot. The latter exhibited a greater antioxidant capacity than the former in single electron transfer (ET), hydrogen atom transfer (HAT), and ET-HAT mixed assays. The chemical differences can be attributed to side reactions that may have interfered with the grafting reaction. Consequently, HMP-GA, possessing unique antioxidant and prebiotic properties, can be synthesized through redox-pair procedures.

Preparation and characterization of amidated pectin-gelatin-oxidized tannic acid hydrogel films supplemented with in-situ reduced silver nanoparticles for wound-dressing applications

Wound dressings play a crucial role in protecting injured tissues and promoting the healing process. Traditional fabrication of antibacterial wound dressings can be complex and may involve toxic components. In this study, we developed an innovative hydrogel film (AP:GE@OTA/Ag) composed of amidated pectin (AP), gelatin (GE), oxidized tannic acid (OTA) at varying concentrations, and in-situ reduced silver nanoparticles (AgNPs). FTIR and XRD analyses confirmed that crosslinking occurs via interactions between OTA quinone groups and free amino groups in AP and GE. TEM imaging demonstrated the well-dispersed AgNPs with an average particle size of 58.64 nm, while the TG measurements indicated the enhancement of the thermal stability compared to AP:GE films. The AP:GE@OTA/Ag films exhibited superior fluid uptake ability (90.96 % at 2 h), water retention capacity (91.69 % at 2 h), and water vapor transmission rate (1903.29 g/m2/day), alongside improved tensile strength (38 MPa). Additionally, these films showed excellent cytocompatibility and sustained potent antimicrobial activity against S. aureus and E. coli with low AgNPs loadings of 1.02 ± 0.13 μg/cm2. NIT-1 mouse insulinoma cells demonstrated robust proliferation when cultured with the prepared dressings. These films significantly accelerated wound repair in a skin excision model, indicating their potential clinical applications for wound healing.

Advancing Photodynamic Antimicrobial Strategy: Sustainable Fabrication of Novel Lauryl Gallate-Chitosan Hydrophobic Films with Rapid Bacterial Capture and Biofilms Elimination Capabilities for Promoting Wound Healing

Bioinspired photoactive composites, in terms of photodynamic inactivation, cost-effectiveness, and biosafety, are promising alternatives to antibiotics for combating bacterial infections while avoiding antibacterial resistance. However, the weak bacterial membrane affinity of the photoactive substrate and the lack of synergistic antibacterial effect remain crucial shortcomings for their antibacterial applications. Herein, we developed a hydrophobic film from food antioxidant lauryl gallate covalently functionalized chitosan (LG-g-CS conjugates) through a green radical-induced grafting reaction that utilizes synergistic bacteria capture, contact-killing, and photodynamic inactivation activities to achieve enhanced bactericidal and biofilm elimination capabilities. Besides, the grafting reaction mechanism between LG and CS in the ascorbic acid (AA)/H2O2 redox system was further proposed. The LG-g-CS films feature hydrophobic side chains and photoactive phenolic hydroxyl groups, facilitating dual bactericidal activities through bacteria capture and contact-killing via strong hydrophobic and electrostatic interactions with bacterial membranes as well as blue light (BL)-driven photodynamic bacterial eradication through the enhanced generation of reactive oxygen species. As a result, the LG-g-CS films efficiently capture and immobilize bacteria and exhibit excellent photodynamic antibacterial activity against model bacteria (Escherichia coli and Staphylococcus aureus) and their biofilms under BL irradiation. Moreover, LG-g-CS films could significantly promote the healing process of S. aureus-infected wounds. This research demonstrates a new strategy for designing and fabricating sustainable bactericidal and biofilm-removing materials with a high bacterial membrane affinity and photodynamic activity.

Exploring the emulsification potential of chitosan modified with phenolic acids: Emulsifying properties, functional activities, and application in curcumin encapsulation

This study successfully grafted caffeic acid and 3,4-dihydroxybenzoic acid into chitosan through a coupling reaction, yielding grafting ratio of 8.93 % for caffeic acid grafted chitosan (CA-GC) and 9.15 % for 3,4-dihydroxybenzoic acid grafted chitosan (DHB-GC) at an optimal concentration of 4 mmol phenolic acids. The characterization of modified chitosans through ultraviolet visible spectrometer (UV-vis), Fourier transform infrared spectrometer (FTIR), proton nuclear magnetic resonance (1H NMR), and x-ray photoelectron spectrometer (XPS) confirmed the successful grafting of phenolic acids. In the subsequent step of emulsion preparation, confocal laser scanning microscope images confirmed the formation of O/W (oil-in-water) emulsions. The phenolic acid-grafted chitosans exhibited better emulsification properties compared to native chitosan, such as reduced droplet size, more uniform emulsion droplet distribution, increased ζ-potential, and enhanced emulsifying activity and stability. Moreover, the modified chitosans demonstrated increased antioxidant activities (evidenced by DPPH and β-carotene assays) and displayed greater antimicrobial effects against E. coli and S. aureus. Its efficacy in curcumin encapsulation was also notable, with improved encapsulation efficiency, sustained release rates, and enhanced storage and photostability. These findings hint at the potential of modified chitosans as an effective emulsifier.

Methyl 4-pyridyl ketone thiosemicarbazone (4-PT) as an effective and safe inhibitor of mushroom tyrosinase and antibrowning agent

Enzymatic browning is of concern as it can affect food safety and quality. In this study, an effective and safe tyrosinase inhibitor and anti-browning agent, methyl 4-pyridyl ketone thiosemicarbazone (4-PT), was synthesised and characterised using Fourier-transform infrared (FTIR) spectroscopy, CHNS elemental analysis, and proton (1H) and carbon-13 (13C) nuclear magnetic resonance (NMR) spectroscopy. The vibrational frequencies of 4-PT were studied theoretically using vibrational energy distribution analysis (VEDA). Density functional theory (DFT) was applied to elucidate its chemical properties, including the Mulliken atomic charges, molecular electrostatic potential (MEP), quantum theory of atoms in molecules (QTAIM) and reduced density gradient non-covalent interactions (RDG-NCIs). Moreover, 4-PT was compared with kojic acid in terms of its effectiveness as a tyrosinase inhibitor and anti-browning agent. The toxicity and physicochemical properties of 4-PT were predicted via ADME evaluation, which proved that 4-PT is safer than kojic acid. Experimentally, 4-PT (IC50 = 5.82 μM, browning index (10 days) = 0.292 ± 0.002) was proven to be an effective tyrosinase inhibitor and anti-browning agent compared to kojic acid (IC50 = 128.17 μM, browning index (10 days) = 0.332 ± 0.002). Furthermore, kinetic analyses indicated that the type of tyrosinase inhibition is a mixed inhibition, with Km and Vmax values of 0.85 mM and 2.78 E-09 μM/s, respectively. Finally, the mechanism of 4-PT for tyrosinase inhibition was proven by 1D, second derivative and 2D IR spectroscopy, molecular docking and molecular dynamic simulation approaches.

Ce(IV)-coordinated organogel-based assay for on-site monitoring of propyl gallate with turn-on fluorescence signal

Propyl gallate (PG) is a commonly used synthetic phenolic antioxidant in foodstuffs and industrial products. Due to the potential health risk of PG, rapid and on-site detection in food and environment samples are important to guarantee human health. Herein, we demonstrated rapid monitoring of PG by a fluorescence turn-on strategy based on a specific fluorogenic reaction between PG and polyethyleneimine (PEI). Specifically, Ce4+ with oxidase-mimicking activity oxidized PG to its oxides, which then reacted with PEI through the Michael addition to generate the fluorescent compound. The proposed fluorogenic reaction had good specificity for PG, which could distinguish PG from other phenolic antioxidants and interferences. Furthermore, portable and low-cost organogel test kits were prepared using poly(ethylene glycol) diacrylate for quantitative and on-site detection of PG via a smartphone-based sensing platform. The organogel-based assay detection limit was 1.0 μg mL-1 with recoveries ranging from 80.2% to 106.2% in edible oils and surface water. Suitability of the developed assay was also validated by high-performance liquid chromatography. Our study provides an effective fluorescent approach to rapid, specific, and convenient monitoring of PG, which is useful for diminishing the risk of PG exposure.

Modified porous starch for enhanced properties: Synthesis, characterization and applications

Native starches have low water solubility at room temperature and poor stability, which demand modifications to overcome. Porous starch as a modified one shows enhanced adsorptive efficiency and solubility compared with its native starch. In contrast, some inherent disadvantages exist, such as weak mechanical strength and low thermal resistance. Fortunately, modified porous starches have been developed to perform well in adsorption capacity and stability. Modified porous starch can be prepared by esterification, crosslinking, oxidation and multiple modifications to the porous starch. The characterization of modified porous starch can be achieved through various analytical techniques. Modified porous starch can be utilized as highly efficient adsorbents and encapsulants for various compounds and applied in various fields. This review dealt with the progress in the preparation, structural characterization and application of modified porous starch. The objective is to provide a reference for its development, utilization, and future research directions.

Acylated pectin/gelatin-based films incorporated with alkylated starch crystals: Characterization, antioxidant and antibacterial activities, and coating preservation effects on golden pomfret

Pectin and starch crystals were modified by ethyl gallate and octadecyl-trimethoxysilane, respectively, followed by using acylated pectin (AP) and alkylated starch crystals (ASCs) as bioactive reagents and hydrophobic enhancers to improve the physiochemical properties of gelatin-based films and evaluate their coating preservation effects on golden pomfret. The properties of AP and ASC were investigated by Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV-vis), proton-nuclear magnetic resonance (¹H NMR) and X-ray diffraction (XRD). The ethyl-gallate-modified pectin/gelatin (AP/G) containing 3 % ASC (AP/G/ASC-3 %) was shown to have the maximum tensile strength and Young's modulus of all the tested composite films. The AP/G containing 10 % ASC exhibited a water contact angle higher than 94°, coupled with a significant improvement in UV-shielding efficiency. FTIR and SEM analysis of the AP/G/ASC-3 % film indicated that the molecular interactions in the composite film components were noncovalent linkages, including hydrogen bonds, hydrophobic interactions, and electrostatic interactions, contributing to homogeneous and smooth microstructures. Additionally, the solutions of AP/G and AP/G/ASC composite films presented obvious antioxidant and antibacterial activities against Escherichia coli and Staphylococcus aureus. Furthermore, the AP/G and AP/G/ASC active coatings could effectively inhibit lipid oxidation and improve the textural acceptability of golden pomfret (Trachinotus blochii) fillets during 4 °C storage.

Application of Vibrational Spectroscopic Techniques in the Study of the Natural Polysaccharides and Their Cross-Linking Process

Polysaccharides are one of the most abundant natural polymers and their molecular structure influences many crucial characteristics-inter alia hydrophobicity, mechanical, and physicochemical properties. Vibrational spectroscopic techniques, such as infrared (IR) and Raman spectroscopies are excellent tools to study their arrangement during polymerization and cross-linking processes. This review paper summarizes the application of the above-mentioned analytical methods to track the structure of natural polysaccharides, such as cellulose, hemicellulose, glucan, starch, chitosan, dextran, and their derivatives, which affects their industrial and medical use.

Non-radical synthesis of amide chitosan with p-coumaric acid and caffeic acid and its application in pork preservation

p-Coumaric acid and caffeic acid were grafted onto chitosan through a non-radical synthesis method to improve the properties of chitosan and expand its application in food industry. Structural characterization demonstrated that the -COOH of the two phenolic acids were bonded to the -NH₂ of the chitosan and formed an acylamino. The grafting ratios of p-coumaric acid-modified chitosan (Cm-CTS) and caffeic acid-modified chitosan (Cf-CTS) reached 10.30 % and 9.78 %, respectively. After modification, the water solubility of the chitosan greatly improved from 9.33 % (native chitosan, Nt-CTS) to 77.33 % (Cm-CTS) and 100 % (Cf-CTS). Besides, the involvement of phenolic acid and caffeic acid endowed the chitosan with strengthened antioxidation and antibacterial activities against Escherichia coli and Staphylococcus aureus. Nt-CTS and the modified chitosans were coated on the pork surface. The results indicated that Nt-CTS effectively inhibited pork spoilage and the modified chitosans could further prolong the shelf life of pork.

Fabrication of phenylalanine amidated pectin using ultra-low temperature enzymatic method and its hydrogel properties in drug sustained release application

In this study, pectin was modified with phenylalanine by ultra-low temperature enzymatic method to improve its gel properties. The grafting ratio of phenylalanine amidated pectin was studied under different reaction conditions. The highest value (29.21 %) was reached a reaction temperature of -5 °C and time of 12 h. Further analysis indicated that phenylalanine and high methoxyl pectin combined at the solid-liquid two phase interface under the catalysis of papain to form phenylalanine amidated pectin. Moreover, the physicochemical properties of pectin hydrogel and its feasibility as a sustained-release drug carrier were discussed. The results showed that phenylalanine amidated pectin can form hydrogel with a certain strength under acidic conditions, and there is no need to add a lot of soluble solids and divalent cations. Besides, the phenylalanine amidated pectin hydrogel as a sustained release carrier of drugs showed more sustained and complete drug release.

Ferulic acid- and gallic ester-acylated pectin: Preparation and characterization

In this study, pectin was modified with ferulic acid (Fa), trans-ferulic acid (trans-Fa), methyl gallate (MG), and ethyl gallate (EG) via the enzymatic method using aqueous/organic phases to enhance its physiochemical and bio-active properties. Results revealed that lipase might catalyze the hydrolysis of the ester bond within pectin in aqueous phase and prompt the transesterification between the hydroxyl group in the para position in Fa/trans-Fa or the 2'-OH group of MG/EG and the carboxylic group of pectin in the organic phase. The graft ratio was 21.00%, 21.67%, 13.24%, and 11.93% for the Fa-, trans-Fa-, MG-, and EG-modified pectin, respectively. In addition, compared with native pectin, the modified pectin exhibited improved apparent viscosity and emulsion activity. Moreover, the clearance of 1,1-diphenyl-2-picryl hydrazine (DPPH) and 2,2'-azinobis-(3-ethylbenzthiazoline-6-sulphonate) (ABTS) was effectively enhanced for the modified pectin. Furthermore, the modified pectin exhibited strong antibacterial activity against Escherichia coli and Staphylococcus aureus while no cytotoxic effects based on the results of cell culture experiments. Our results provide a theoretical basis for the expansion of pectin applications in the food and pharmaceutical industries.