Thermal, mechanical, and rheological properties of micro-fibrillated cellulose-reinforced starch foams crosslinked with polysiloxane-based cross-linking agents

Use of cellulose microfibers from olive pomace to reinforce green composites for sustainable packaging applications

To valorize abundant, unexploited, and low-cost agro-industrial by-products, olive pomace is proposed as a sustainable and renewable raw material for cellulose microfibers (CMFs) production. In this study, CMFs were extracted from olive pomace using alkaline and bleaching treatments and characterized in terms of morphological, structural, and thermal properties. Afterward, the reinforcing capability of microfibers was examined using carboxymethyl cellulose (CMC) as a polymer matrix by the solvent casting process. The effects of CMF loading (1%, 3%, 5%, and 10%) on the composites' mechanical, physical, morphological, and thermal properties were assessed. CMF incorporation led to a decrease in moisture content (MC), water solubility (WS), and water vapor permeability (WVP) and an increase in tensile strength (TS), stiffness and transparency values, and thermal stability of CMC films. Increasing CMF content to 5%, increased the TS and elasticity modulus by 54% and 79%, respectively, and reduced the WVP and light transmissivity at 280 nm, by 22% and 47%, respectively. The highest water, moisture, light barrier, and mechanical properties of composites were reached at 5% CMFs.

Hemicellulose and Nano/Microfibrils Improving the Pliability and Hydrophobic Properties of Cellulose Film by Interstitial Filling and Forming Micro/Nanostructure

In this paper, nano/microfibrils were applied to enhance the mechanical and hydrophobic properties of the sugarcane bagasse fiber films. The successful preparation of nano/microfibrils was confirmed by scanning electron microscope (SEM), X-ray diffraction (XRD), fiber length analyzer (FLA), and ion chromatography (IC). The transparency, morphology, mechanical and hydrophobic properties of the cellulose films were evaluated. The results show that the nanoparticle was formed by the hemicellulose diffusing on the surface of the cellulose and agglomerating in the film-forming process at 40 °C. The elastic modulus of the cellulose film was as high as 4140.60 MPa, and the water contact angle was increased to 113°. The micro/nanostructures were formed due to hemicellulose adsorption on nano/microfilament surfaces. The hydrophobicity of the films was improved. The directional crystallization of nano/microfibrous molecules was found. Cellulose films with a high elastic modulus and high elasticity were obtained. It provides theoretical support for the preparation of high-performance cellulose film.