Decellularized Alstroemeria flower stem modified with chitosan for tissue engineering purposes: A cellulose/chitosan scaffold

Magnesium oxide nanoparticle reinforced pumpkin-derived nanostructured cellulose scaffold for enhanced bone regeneration

Considering global surge in bone fracture prevalence, limitation in use of traditional healing approaches like bone grafts highlights the need for innovative regenerative strategies. Here, a novel green fabrication approach has reported for reinforcement of physicochemical performances of sustainable bioinspired extracellular matrix (ECM) based on decellularized pumpkin tissue coated with Magnesium oxide nanoparticles (hereafter called DM-Pumpkin) for enhanced bone regeneration. Compared to uncoated scaffold, DM-Pumpkin exhibited significantly improved surface roughness, mechanical stiffness, porosity, hydrophilicity, swelling, and biodegradation rate. Obtained nanoporous structure provides an ideal three-dimensional microenvironment for the attachment, migration and osteo-induction in human adipose-derived mesenchymal stem cells (h- AdMSCs). Calcium deposition and mineralization, alkaline phosphatase activity, and SEM imaging of the cells as well as increased expression of bone-related genes after 21 days incubation confirmed capability of DM-Pumpkin in mimicking the biological properties of bone tissue. The presence of MgONPs had a silencing effect on inflammatory factors and improved wound closure, verified by in vivo studies. Increased expression of collagen type I and osteocalcin in the h- AdMSCs cultured on DM-Pumpkin compared to control further corroborated gained results. Altogether, boosting physicochemical and biological properties of DM-Pumpkin due to surface modification is a promising approach for guided bone regeneration.

Recent advances in plant-derived polysaccharide scaffolds in tissue engineering: A review

As a natural three-dimensional biopolymer, decellularized plant-derived scaffolds usually comprise various polysaccharides, mostly cellulose, pectin, and hemicellulose. They are characterized by natural biocompatibility and porous structures. The emergence of decellularized purified polysaccharide scaffolds provides an attractive method to overcome the challenges associated with nutrient delivery and biocompatibility, as they serve as optimal non-immune environments for stem cell adhesion and proliferation. To date, limited corresponding literature is available to systemically summarize the development and potential of these scaffolds in tissue engineering. Therefore, the current review summarized the biomimetic properties of plant-derived polysaccharide scaffolds and the latest progress in tissue engineering applications. This review first discusses the advantages of decellularized plant-derived polysaccharide scaffolds by briefly introducing their features and current limitations in clinical applications. Subsequently, the latest progress in emerging applications of regenerative biomaterials is reviewed, followed by a discussion of the studies on the interactions of biomaterials with cells and tissues. Finally, challenges in obtaining reliable scaffolds and possible future directions are discussed.

Three-dimensional pore structure of the decellularized parsley scaffold regulates myogenic differentiation for cell cultured meat

Decellularized plant scaffolds have been used to develop edible scaffolds for cell cultured meat because of their natural structures similar to that of mammalian tissues. However, their diverse three-dimensional (3D) porous structures may lead to differences in myogenic differentiation of skeletal muscle cells. In this study, parsley plant tissues were decellularized and modified by type A gelatin and transglutaminase while retaining, respectively, longitudinal fibrous and transverse honeycomb pore structures. The effects of the structure of the decellularized parsley scaffold on the proliferation and myogenic differentiation of C2C12 cells were investigated and the quality of cell cultured meat was evaluated. The results showed that fibrous pore structure guided cells to be arranged in parallel, whereas honeycomb pore structure connected cells in a circular pattern. After induced differentiation, the fibrous scaffolds were more inclined to form multinucleated myotubes with higher expression of myogenic genes and proteins, and the final cell-based meat contained higher total protein content. Decellularized plant scaffolds with fibrous pore structure were more suitable for myogenic differentiation of C2C12 cells, providing support to the development of edible scaffolds for cultured meat. PRACTICAL APPLICATION: This study investigated the different three-dimensional (3D) pore structure of parsley parenchyma to gain insight into how the 3D pore structure of decellularized plant scaffolds regulates myogenic differentiation, which is expected to address the unstable myogenic differentiation of skeletal muscle cells on decellularized plant scaffolds in cell culture meat production.

Fabrication and evaluation of a bi-layered electrospun PCL/PVA patch for wound healing: Release of vitamins and silver nanoparticle

There is still little research on the co-delivery of vitamins and AgNPs to accelerate wound healing. In this study, a bi-layered electrospun PCL/PVA patch loaded with Vitamin C, Vitamin B12, and AgNPs was fabricated using a co-spinning technique. SEM, FTIR, degradation, swelling, tensile strength, disk diffusion, and MTT assay were studied. Nine rats were placed in three groups (control: no treatment, G1: without agents, and G2: with agents) for 14 days in an in-vivo study. H&E and Masson Trichrome staining were employed for histological analysis. Results showed that the final electrospun wound dressings depicted nanofibers with diameters ranging from 100 to 500 nm. The presence of AgNP enhanced the mechanical strength (40-50 MPs). An appropriate swelling (100 %) and degradation (50 %) rate was observed for groups with no significant difference (P > 0.05). G1 and G2 did not show a significant difference in terms of porosity (65 % vs. 69 %). Regarding WVTR, G2 demonstrated higher WVTR (88 vs. 95 g/m2. h). G2 showed a vitamin release of more than 90 % after 48 h. Compared to G1, G2 demonstrated good antibacterial activity (>3 cm) against E. Coli and S. aureous (P < 0.01), with cell viability of more than 93 % (P > 0.05). Furthermore, the in-vivo study approved that G2 accelerated wound healing in full-thickness wounds, compared to the control groups, with notable wound size reduction (8 mm), epithelialization, and collagen formation. The findings support the use of this simple but potent electrospun wound dressing for the healing of full-thickness wounds.

From Nature to Technology: Exploring the Potential of Plant-Based Materials and Modified Plants in Biomimetics, Bionics, and Green Innovations

This review explores the extensive applications of plants in areas of biomimetics and bioinspiration, highlighting their role in developing sustainable solutions across various fields such as medicine, materials science, and environmental technology. Plants not only serve essential ecological functions but also provide a rich source of inspiration for innovations in green nanotechnology, biomedicine, and architecture. In the past decade, the focus has shifted towards utilizing plant-based and vegetal waste materials in creating eco-friendly and cost-effective materials with remarkable properties. These materials are employed in making advancements in drug delivery, environmental remediation, and the production of renewable energy. Specifically, the review discusses the use of (nano)bionic plants capable of detecting explosives and environmental contaminants, underscoring their potential in improving quality of life and even in lifesaving applications. The work also refers to the architectural inspirations drawn from the plant world to develop novel design concepts that are both functional and aesthetic. It elaborates on how engineered plants and vegetal waste have been transformed into value-added materials through innovative applications, especially highlighting their roles in wastewater treatment and as electronic components. Moreover, the integration of plants in the synthesis of biocompatible materials for medical applications such as tissue engineering scaffolds and artificial muscles demonstrates their versatility and capacity to replace more traditional synthetic materials, aligning with global sustainability goals. This paper provides a comprehensive overview of the current and potential uses of living plants in technological advancements, advocating for a deeper exploration of vegetal materials to address pressing environmental and technological challenges.

Plant Decellularization by Chemical and Physical Methods for Regenerative Medicine: A Review Article

Fabricating three-dimensional (3D) scaffolds is attractive due to various advantages for tissue engineering, such as cell migration, proliferation, and adhesion. Since cell growth depends on transmitting nutrients and cell residues, naturally vascularized scaffolds are superior for tissue engineering. Vascular passages help the inflow and outflow of liquids, nutrients, and waste disposal from the scaffold and cell growth. Porous scaffolds can be prepared by plant tissue decellularization which allows for the cultivation of various cell lines depending on the intended application. To this end, researchers decellularize plant tissues by specific chemical and physical methods. Researchers use plant parts depending on their needs, for example, decellularizing the leaves, stems, and fruits. Plant tissue scaffolds are advantageous for regenerative medicine, wound healing, and bioprinting. Studies have examined various plants such as vegetables and fruits such as orchid, parsley, spinach, celery, carrot, and apple using various materials and techniques such as sodium dodecyl sulfate, Triton X-100, peracetic acid, deoxyribonuclease, and ribonuclease with varying percentages, as well as mechanical and physical techniques like freeze-thaw cycles. The process of data selection, retrieval, and extraction in this review relied on scholarly journal publications and other relevant papers related to the subject of decellularization, with a specific emphasis on plant-based research. The obtained results indicate that, owing to the cellulosic structure and vascular nature of the decellularized plants and their favorable hydrophilic and biological properties, they have the potential to serve as biological materials and natural scaffolds for the development of 3D-printing inks and scaffolds for tissue engineering.

In Vitro Release of Glycyrrhiza Glabra Extract by a Gel-Based Microneedle Patch for Psoriasis Treatment

Microneedle patches are attractive drug delivery systems that give hope for treating skin disorders. In this study, to first fabricate a chitosan-based low-cost microneedle patch (MNP) using a CO2 laser cutter for in vitro purposes was tried and then the delivery and impact of Glycyrrhiza glabra extract (GgE) on the cell population by this microneedle was evaluated. Microscopic analysis, swelling, penetration, degradation, biocompatibility, and drug delivery were carried out to assess the patch's performance. DAPI staining and acridine orange (AO) staining were performed to evaluate cell numbers. Based on the results, the MNs were conical and sharp enough (diameter: 400-500 μm, height: 700-900 μm). They showed notable swelling (2 folds) during 5 min and good degradability during 30 min, which can be considered a burst release. The MNP showed no cytotoxicity against fibroblast cell line L929. It also demonstrated good potential for GgE delivery. The results from AO and DAPI staining approved the reduction in the cell population after GgE delivery. To sum up, the fabricated MNP can be a useful recommendation for lab-scale studies. In addition, a GgE-loaded MNP can be a good remedy for skin disorders in which cell proliferation needs to be controlled.

In vitro modeling of hepatocellular carcinoma niche on decellularized tomato thorny leaves: a novel natural three-dimensional (3D) scaffold for liver cancer therapeutics

Liver cancer is now one of the main causes leading to death worldwide. To achieve reliable therapeutic effects, it is crucial to develop efficient approaches to test novel anticancer drugs. Considering the significant contribution of tumor microenvironment to cell's response to medications, in vitro 3D bioinspiration of cancer cell niches can be regarded as an advanced strategy to improve the accuracy and reliability of the drug-based treatment. In this regard, decellularized plant tissues can perform as suitable 3D scaffolds for mammalian cell culture to create a near-to-real condition to test drug efficacy. Here, we developed a novel 3D natural scaffold made from decellularized tomato hairy leaves (hereafter called as DTL) to mimic the microenvironment of human hepatocellular carcinoma (HCC) for pharmaceutical purposes. The surface hydrophilicity, mechanical properties, and topography measurement and molecular analyses revealed that the 3D DTL scaffold is an ideal candidate for liver cancer modeling. The cells exhibited a higher growth and proliferation rate within the DTL scaffold, as verified by quantifying the expression of related genes, DAPI staining, and SEM imaging of the cells. Moreover, prilocaine, an anticancer drug, showed a higher effectiveness against the cancer cells cultured on the 3D DTL scaffold, compared to a 2D platform. Taken together, this new cellulosic 3D scaffold can be confidently proposed for chemotherapeutic testing of drugs on hepatocellular carcinoma.

Biomaterials Based on Chitosan and Its Derivatives and Their Potential in Tissue Engineering and Other Biomedical Applications-A Review

In the times of dynamically developing regenerative medicine, more and more attention is focused on the use of natural polymers. This is due to their high biocompatibility and biodegradability without the production of toxic compounds, which means that they do not hurt humans and the natural environment. Chitosan and its derivatives are polymers made most often from the shells of crustaceans and are biodegradable and biocompatible. Some of them have antibacterial or metal-chelating properties. This review article presents the development of biomaterials based on chitosan and its derivatives used in regenerative medicine, such as a dressing or graft of soft tissues or bones. Various examples of preparations based on chitosan and its derivatives in the form of gels, films, and 3D structures and crosslinking products with another polymer are discussed herein. This article summarizes the latest advances in medicine with the use of biomaterials based on chitosan and its derivatives and provides perspectives on future research activities.

Recent Advances of Chitosan Formulations in Biomedical Applications

Chitosan, a naturally abundant cationic polymer, is chemically composed of cellulose-based biopolymers derived by deacetylating chitin. It offers several attractive characteristics such as renewability, hydrophilicity, biodegradability, biocompatibility, non-toxicity, and a broad spectrum of antimicrobial activity towards gram-positive and gram-negative bacteria as well as fungi, etc., because of which it is receiving immense attention as a biopolymer for a plethora of applications including drug delivery, protective coating materials, food packaging films, wastewater treatment, and so on. Additionally, its structure carries reactive functional groups that enable several reactions and electrochemical interactions at the biomolecular level and improves the chitosan’s physicochemical properties and functionality. This review article highlights the extensive research about the properties, extraction techniques, and recent developments of chitosan-based composites for drug, gene, protein, and vaccine delivery applications. Its versatile applications in tissue engineering and wound healing are also discussed. Finally, the challenges and future perspectives for chitosan in biomedical applications are elucidated.

Chitosan-Based Scaffolds for Facilitated Endogenous Bone Re-Generation

Facilitated endogenous tissue engineering, as a facile and effective strategy, is emerging for use in bone tissue regeneration. However, the development of bioactive scaffolds with excellent osteo-inductivity to recruit endogenous stem cells homing and differentiation towards lesion areas remains an urgent problem. Chitosan (CS), with versatile qualities including good biocompatibility, biodegradability, and tunable physicochemical and biological properties is undergoing vigorously development in the field of bone repair. Based on this, the review focus on recent advances in chitosan-based scaffolds for facilitated endogenous bone regeneration. Initially, we introduced and compared the facilitated endogenous tissue engineering with traditional tissue engineering. Subsequently, the various CS-based bone repair scaffolds and their fabrication methods were briefly explored. Furthermore, the functional design of CS-based scaffolds in bone endogenous regeneration including biomolecular loading, inorganic nanomaterials hybridization, and physical stimulation was highlighted and discussed. Finally, the major challenges and further research directions of CS-based scaffolds were also elaborated. We hope that this review will provide valuable reference for further bone repair research in the future.