Effect of crosslinking strategy on the biological, antibacterial and physicochemical performance of hyaluronic acid and ɛ-polylysine based hydrogels

The Microalgae Chlamydomonas for Bioremediation and Bioproduct Production

The extensive metabolic diversity of microalgae, coupled with their rapid growth rates and cost-effective production, position these organisms as highly promising resources for a wide range of biotechnological applications. These characteristics allow microalgae to address crucial needs in the agricultural, medical, and industrial sectors. Microalgae are proving to be valuable in various fields, including the remediation of diverse wastewater types, the production of biofuels and biofertilizers, and the extraction of various products from their biomass. For decades, the microalga Chlamydomonas has been widely used as a fundamental research model organism in various areas such as photosynthesis, respiration, sulfur and phosphorus metabolism, nitrogen metabolism, and flagella synthesis, among others. However, in recent years, the potential of Chlamydomonas as a biotechnological tool for bioremediation, biofertilization, biomass, and bioproducts production has been increasingly recognized. Bioremediation of wastewater using Chlamydomonas presents significant potential for sustainable reduction in contaminants and facilitates resource recovery and valorization of microalgal biomass, offering important economic benefits. Chlamydomonas has also established itself as a platform for the production of a wide variety of biotechnologically interesting products, such as different types of biofuels, and high-value-added products. The aim of this review is to achieve a comprehensive understanding of the potential of Chlamydomonas in these aspects, and to explore their interrelationship, which would offer significant environmental and biotechnological advantages.

Dual fluorescence response of calix[4]arene-1,8-naphthalimide derivatives towards Hg(II) /Cr(VI) and their antimicrobial studies of transparent biofilms with hyaluronic acid

In this study, 4-sulfo-1,8-naphthalimide calixarene of derivatives were prepared (3 and 4) then transparent biofilms of the Ag salts of these compounds were formed in the presence of hyaluronic acid (HA), and antimicrobial properties were investigated. In chemosensor studies, the sensing ability behavior of 3 and 4 towards some cations and anions was investigated by fluorescence spectroscopy. It was observed that the prepared chemosensors show selectivity towards Hg(II) and Cr(VI). Ligand-ion interaction occurs according to the photo-induced electron transfer (PET) mechanism. The stoichiometric ratio was calculated by using Stern-Volmer plot method and binding constant Ksv values were found as 5.2 × 107 M-1 and 5.5 × 107 M-1 for 3-Hg(II) and 4-Hg(II) complexes, respectively and 4.0 × 107 M-1 and 4.3 × 107 M-1 for 3-Cr(VI) and 4-Cr(VI) complexes. The detection limits of the complexes of 3-Hg(II) and 4-Hg(II) are 6.35 × 10-12and 6.81 × 10-12, while those of 3-Cr(VI) and 4-Cr(VI) are 1.41 × 10- 11and 8.37 × 10-12, respectively. As a result of the antimicrobial test performed with these compounds, it was observed that the most effective material was HA-3Ag, which showed a significant antibacterial effect against Sarcina lutea (S. lutea) at a minimum inhibitory concentration (MIC) value of 0.097 mg/mL.

Advances and applications of crosslinked electrospun biomacromolecular nanofibers

Electrospinning is a technology for fabricating ultrafine fibers from natural or synthetic polymers that have novel or enhanced functional properties. These fibers have found applications in a diverse range of fields, including the food, medicine, cosmetics, agriculture, and chemical industries. However, the tendency for electrospun nanofibers to dissociate when exposed to certain environmental conditions limits many of their practical applications. The structural integrity and functional attributes of these nanofibers can be improved using physical and/or chemical crosslinking methods. This review article discusses the formation of polymeric nanofibers using electrospinning and then describes how different crosslinking methods can be used to enhance their mechanical, thermal, and biological attributes. Methods for optimizing the crosslinking reactions are discussed, including proper selection of crosslinker type and reaction conditions. Then, food, medical, and separation applications of crosslinked electrospun fibers are assessed, including in bone and skin tissue engineering, wound healing, drug delivery, air filtration, water filtration, oil removal, food packaging, food preservation, and bioactive delivery. Finally, areas where future research are needed are highlighted, as well as possible future applications of crosslinked nanofibers.

Exploring the Progress of Hyaluronic Acid Hydrogels: Synthesis, Characteristics, and Wide-Ranging Applications

This comprehensive review delves into the world of hyaluronic acid (HA) hydrogels, exploring their creation, characteristics, research methodologies, and uses. HA hydrogels stand out among natural polysaccharides due to their distinct features. Their exceptional biocompatibility makes them a top choice for diverse biomedical purposes, with a great ability to coexist harmoniously with living cells and tissues. Furthermore, their biodegradability permits their gradual breakdown by bodily enzymes, enabling the creation of temporary frameworks for tissue engineering endeavors. Additionally, since HA is a vital component of the extracellular matrix (ECM) in numerous tissues, HA hydrogels can replicate the ECM's structure and functions. This mimicry is pivotal in tissue engineering applications by providing an ideal setting for cellular growth and maturation. Various cross-linking techniques like chemical, physical, enzymatic, and hybrid methods impact the mechanical strength, swelling capacity, and degradation speed of the hydrogels. Assessment tools such as rheological analysis, electron microscopy, spectroscopy, swelling tests, and degradation studies are employed to examine their attributes. HA-based hydrogels feature prominently in tissue engineering, drug distribution, wound recovery, ophthalmology, and cartilage mending. Crafting HA hydrogels enables the production of biomaterials with sought-after qualities, offering avenues for advancements in the realm of biomedicine.

Natural Clay-Modified Piezocatalytic Membrane for Efficient Removal of Coliform Bacteria from Wastewater

In the modern era, water pollution, especially from industries, agricultural farms, and residential areas, is caused by the release of a large scale of heavy metals, organic pollutants, chemicals, etc., into the environment, posing a serious threat to aquatic ecosystems and nature. Moreover, untreated sewage waste discharged directly into nearby water bodies can cause various diseases to mankind due to the high load of fecal coliform bacteria. This work demonstrates the development of a biocompatible, cost-effective, highly robust, efficient, flexible, freestanding, and reusable membrane using naturally formed biocompatible kaolinite clay-doped poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) for effective piezodynamic destruction of coliform bacteria. In this study, Escherichia coli (E. coli) and Enterococcus faecalis (E. faecalis) have been used to evaluate the mechanical stimulus-responsive antibacterial efficacy of the nanocomposite membrane. The membrane can effectively eradicate nearly 99% viable E. coli and 97% E. faecalis within a span of 40 min under mechanical stimulation (soft ultrasound ∼15 kHz). To further understand the mechanism, an evaluation of reactive oxygen species and bacterial FESEM was performed. These studies revealed that bacterial cells suffered severe visible cell damage after 40 min of piezocatalysis, elucidating the fact that the synthesized membrane is capable of producing a superior piezodynamic antibacterial effect.

Antibacterial, ROS scavenging and angiogenesis promotingϵ-Polylysine/gelatin based hydrogel containing CTLP to regulate macrophages for pressure ulcer healing

Pressure ulcers (PUs) have emerged as a substantial burden on individuals and society. The introduction of innovative dressings that facilitate the healing of pressure ulcer wounds represents a cost-effective alternative for treatment. In this study, the emphasis is on the preparation of Carthamus tinctorius L. polysaccharide (CTLP) as hydrogel microspheres (MPs), which are then encapsulated within a hydrogel matrix crosslinked with phenylboronic acid gelatin (Gelatin-PBA) andϵ-polylysine-grafted catechol (ϵ-PL-Cat) to enable sustained release for promoting pressure ulcer healing. The presented Gelatin-PBA/ϵ-PL-Cat (GPL)/CTLP-MPs hydrogel demonstrated outstanding self-healing properties. In addition,in vitroexperiments revealed that the hydrogel exhibited remarkable antibacterial activity, excellent biocompatibility. And it showed the capacity to promote vascular formation, effectively scavenge reactive oxygen species, and facilitate macrophage polarization from the M1 to M2 phenotype.In vivowound healing of mice PUs indicated that the prepared GPL/CTLP-MPs hydrogel effectively accelerated the formation of granulation tissue and facilitated the healing of the wounds. In summary,in vivoandin vitroexperiments consistently highlight the therapeutic potential of GPL/CTLP-MPs hydrogel in facilitating the healing process of PUs.

Bilayer regenerated cellulose/quaternized chitosan-hyaluronic acid/collagen electrospun scaffold for potential wound healing applications

In this study, a bilayer electrospun scaffold has been prepared using regenerated cellulose (RC)/quaternized chitosan (CS) as the primary layer and collagen/hyaluronic acid (HA) as the second layer. An approximate 48 mol% substituted (estimated from 1H NMR) quaternized CS was used in this study. Both layers were crosslinked with EDC/NHS, reflecting an increase in UTS (2.29 MPa for the bilayer scaffold compared to 1.82 MPa for the RC scaffold). Initial cell viability, cell adhesion and proliferation, FDA staining for live cells, and hydroxyproline release rate from cells were evaluated with L929 mouse fibroblast cells. Also, detailed in vitro studies were performed using HADF cells, which include MTT Assay, Live/Dead imaging, DAPI staining, gene expression of PDGF, VEGF-A, and COL1 in RT-PCR, and cell cycle analysis. The collagen/HA-based bilayer scaffold depicted a 9.76-fold increase of VEGF-A compared to a 2.1-fold increase for the RC scaffold, indicating angiogenesis and vascularization potential. In vitro scratch assay was performed to observe the migration of cells in simulated wounds. Antimicrobial, antioxidant, and protease inhibitory activity were further performed, and overall, the primary results highlighted the potential usage of bilayer scaffold in wound healing applications.

Fabrication of bioinspired keratin/sodium alginate based biopolymeric mat loaded with herbal drug and green synthesized zinc oxide nanoparticles as a dual drug antimicrobial wound dressing

Dual drug antibacterial wound dressings with biological materials possess crucial wound healing characteristics including biocompatibility, non-toxicity, degradability, mechanical strength and antibacterial properties. The study focusses on fabricating keratin (K)‑sodium alginate (A) based wound dressings by loading green synthesized zinc oxide nanoparticles (ZnO NPs) using C. roseus (leaf extract) and M. recutita (Chamomile flower part) herbal drug (CH) as a bioactive dual antibacterial wound dressing for the first time. The optimized ZnO NPs and CH exhibits strong physiochemical and electrostatic interactions (FT-IR, XRD and SEM) on the fabricated K-A-CH-ZnO biopolymeric mats. Moreover, the tiny porous network of the biopolymeric mat enhances thermal stability, hydrophilicity, mechanical strength and explores the water vapor transmission (2538.07 g/m2/day) and oxygen permeability (7.38 ± 0.31 g/m2) to maintain moist environment and cell-material interactions. During enzymatic degradation studies, ZnO NPs and CH of biopolymeric mat not only retains structural integrity but also increases the characteristic of swelling with sustained drug release (57 %) in 144 h which accelerates wound healing process. Also, K-A-CH-ZnO mat exhibited excellent antibacterial effects against B. subtilis and E. coli. Furthermore, NIH 3T3 fibroblast cell behavior using MTT assay and in vivo evaluations of biopolymeric mat depicted enhanced biocompatibility with increased collagen deposition at the wound site as a prominent dual drug medicated antimicrobial wound dressing.

Recent advances in composite hydrogels: synthesis, classification, and application in the treatment of bone defects

Bone defects are often difficult to treat due to their complexity and specificity, and therefore pose a serious threat to human life and health. Currently, the clinical treatment of bone defects is mainly surgical. However, this treatment is often more harmful to patients and there is a potential risk of rejection and infection. Hydrogels have a unique three-dimensional structure that can accommodate a variety of materials, including particles, polymers and small molecules, making them ideal for treating bone defects. Therefore, emerging composite hydrogels are considered one of the most promising candidates for the treatment of bone defects. This review describes the use of different types of composite hydrogel in the treatment of bone defects. We present the basic concepts of hydrogels, different preparation techniques (including chemical and physical crosslinking), and the clinical requirements for hydrogels used to treat bone defects. In addition, a review of numerous promising designs of different types of hydrogel doped with different materials (e.g., nanoparticles, polymers, carbon materials, drugs, and active factors) is also highlighted. Finally, the current challenges and prospects of composite hydrogels for the treatment of bone defects are presented. This review will stimulate research efforts in this field and promote the application of new methods and innovative ideas in the clinical field of composite hydrogels.

An antibacterial and healing-promoting collagen fibril constructed by the simultaneous strategy of fibril reconstitution and ε-polylysine anchoring for infected wound repair

The development of antibacterial dressings has attracted much attention to address the disordered wound healing caused by bacterial infection. Constructing dressings that have desirable antibacterial activity and could promote wound healing is important for infected wound repair. Inspired by the role of the key regulator collagen fibrils with D-periodic functional domains in the physiological wound healing process, we developed an antibacterial and wound healing-promoting collagen fibril with a structure highly similar to natural collagen in ECM and inherent antibacterial activity by the simultaneous strategy of fibril reconstitution and the antibacterial agent ε-polylysine (ε-PL) anchoring. Accompanied by the fibrillogenesis of collagen molecules, the anchorage of ε-PL into collagen fibrils was actualized through the formation of the covalent bond catalyzed by transglutaminase (TGase) between ε-PL and collagen. The collagen fibril possessed natural D-periodicity and achieved 20% ε-PL graft yield by co-assembling collagen/ε-PL mediated by 25 U g-1 TGase, which showed a satisfactory proliferation of L929 fibroblasts and sustained inhibition rates above 90% against E. coli and S. aureus. The rat S. aureus-infected dermal wound model further demonstrated that the reconstituted antibacterial collagen fibril visibly promoted re-epithelialization, new collagen deposition, and angiogenesis by down-regulating the inflammatory-relative gene IL-6 and up-regulating the relative activity factor expression of CD31, achieving accelerated infected wound healing with 61.89% ± 3.96% wound closure on postoperative day 7 and full closure on day 14.

Double-network cellulose-based hybrid hydrogels with favourable biocompatibility and antibacterial activity for wound healing

Bacterial infections are among the leading causes of delayed wound healing. At present, a series of antibacterial materials, such as antibiotics, antimicrobial peptides (AMPs), metals and metal oxides (MMOs), have been used to fabricate antibacterial wound dressings. However, their translational potential is limited owing to their poor biocompatibility. ε-Polylysine (ε-PL) is a natural macromolecule with excellent biocompatibility and broad-spectrum antibacterial activity. Herein, ε-PL was incorporated into a cellulose/γ-polyglutamic acid (γ-PGA) composite hydrogel to form a novel double-network hydrogel termed as CGLH. The elastic modulus of CGLH increased from 0.097 ± 0.015 MPa to 0.441 ± 0.096 MPa, and the equilibrium swelling ratio increased from 382.7 ± 24.3 % to 611.2 ± 8.6 %. Several preclinical models were used to investigate the translational potential of this hydrogel. CGLH exhibited good biocompatibility and antibacterial activity, which promoted the healing of infected and critical-size wounds within 12 days. CGLH had positive effects on collagen synthesis, vascularization and cell proliferation. As a result, this study not only provided an effective alternative for wound healing but also proposed a double-network strategy for creating biocompatible and antibacterial biomaterials.

Polysaccharide hydrogel platforms as suitable carriers of liposomes and extracellular vesicles for dermal applications

Lipid-based nanocarriers have been extensively investigated for their application in drug delivery. Particularly, liposomes are now clinically established for treating various diseases such as fungal infections. In contrast, extracellular vesicles (EVs) - small cell-derived nanoparticles involved in cellular communication - have just recently sparked interest as drug carriers but their development is still at the preclinical level. To drive this development further, the methods and technologies exploited in the context of liposome research should be applied in the domain of EVs to facilitate and accelerate their clinical translation. One of the crucial steps for EV-based therapeutics is designing them as proper dosage forms for specific applications. This review offers a comprehensive overview of state-of-the-art polysaccharide-based hydrogel platforms designed for artificial and natural vesicles with application in drug delivery to the skin. We discuss their various physicochemical and biological properties and try to create a sound basis for the optimization of EV-embedded hydrogels as versatile therapeutic avenues.

A Microfluidic Approach for Synthesis of Silver Nanoparticles as a Potential Antimicrobial Agent in Alginate-Hyaluronic Acid-Based Wound Dressings

The recognized antimicrobial activity of silver nanoparticles is a well-studied property, especially when designing and developing biomaterials with medical applications. As biological activity is closely related to the physicochemical characteristics of a material, aspects such as particle morphology and dimension should be considered. Microfluidic systems in continuous flow represent a promising method to control the size, shape, and size distribution of synthesized nanoparticles. Moreover, using microfluidics widens the synthesis options by creating and controlling parameters that are otherwise difficult to maintain in conventional batch procedures. This study used a microfluidic platform with a cross-shape design as an innovative method for synthesizing silver nanoparticles and varied the precursor concentration and the purging speed as experimental parameters. The compositional and microstructural characterization of the obtained samples was carried out by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and dynamic light scattering (DLS). Four formulations of alginate-based hydrogels with the addition of hyaluronic acid and silver nanoparticles were obtained to highlight the antimicrobial activity of silver nanoparticles and the efficiency of such a composite in wound treatment. The porous structure, swelling capacity, and biological properties were evaluated through physicochemical analysis (FT-IR and SEM) and through contact with prokaryotic and eukaryotic cells. The results of the physicochemical and biological investigations revealed desirable characteristics for performant wound dressings (i.e., biocompatibility, appropriate porous structure, swelling rate, and degradation rate, ability to inhibit biofilm formation, and cell growth stimulation capacity), and the obtained materials are thus recommended for treating chronic and infected wounds.

Characterization and Antibacterial Properties of Egg White Protein Films Loaded with ε-Polylysine: Evaluation of Their Degradability and Application

There is an ongoing trend to design new kinds of food packaging materials with excellent properties which are environmentally friendly enough. The aim of this study was to prepare and characterize egg white protein (EWP)-based composite films with and without ε-polylysine (Lys), as well as to compare their physical-chemical properties, structural properties, degradation and antibacterial properties. The results showed that with the addition of Lys, the composite films showed a decreasing tendency of the water permeability due to the enhanced interaction between proteins and water molecules. As indicated by the structural properties, stronger cross-linking and intermolecular interactions happened with increasing concentration of Lys. In addition, the composite films presented excellent antibacterial activities against Escherichia coli and Staphylococcus aureus on chilled pork in the presence of Lys. Therefore, our prepared films might be used as a freshness-keeping material with an application in meat preservation. The biodegradation evaluation demonstrated that the composite films were environmental-friendly and have potential applications in the field of food packaging.

Fabrication of hydrogel microspheres via microfluidics using inverse electron demand Diels-Alder click chemistry-based tetrazine-norbornene for drug delivery and cell encapsulation applications

Microfluidic on-chip production of polymeric hydrogel microspheres (MPs) can be designed for the loading of different biologically active cargos and living cells. Among different gelation strategies, ionically crosslinked microspheres generally show limited mechanical properties, meanwhile covalently crosslinked microspheres often require the use of crosslinking agents or initiators with limited biocompatibility. Inverse electron demand Diels Alder (iEDDA) click chemistry is a promising covalent crosslinking method with fast kinetics, high chemoselectivity, high efficiency and no cross-reactivity. Herein, in situ gellable iEDDA-crosslinked polymeric hydrogel microspheres are developed via water-in-oil emulsification (W/O) glass microfluidics. The microspheres are composed of two polyethylene glycol precursors modified with either tetrazine or norbornene as functional moieties. Using a single co-flow glass microfluidic platform, homogenous MPs of sizes 200-600 μm are developed and crosslinked within 2 minutes. The rheological properties of iEDDA crosslinked bulk hydrogels are maintained with a low swelling degree and a slow degradation behaviour under physiological conditions. Moreover, a high-protein loading capacity can be achieved, and the encapsulation of mammalian cells is possible. Overall, this work provides the possibility of developing microfluidics-produced iEDDA-crosslinked MPs as a potential drug vehicle and cell encapsulation system in the biomedical field.

Carboxymethyl cellulose-agarose-gelatin: A thermoresponsive triad bioink composition to fabricate volumetric soft tissue constructs

Polysaccharide based hydrogels have been predominantly utilized as ink materials for 3D bioprinting due to biocompatibility and cell responsive features. However, most hydrogels require extensive crosslinking due to poor mechanical properties leading to limited printability. To improve printability without using cytotoxic crosslinkers, thermoresponsive bioinks could be developed. Agarose is a thermoresponsive polysaccharide with upper critical solution temperature (UCST) for sol-gel transition at 35-37 °C. Therefore, we hypothesized that a triad of carboxymethyl cellulose(C)-agarose(A)-gelatin(G) could be a suitable thermoresponsive ink for printing since they undergo instantaneous gelation without any addition of crosslinkers after bioprinting. The blend of agarose-carboxymethyl cellulose was mixed with 1% w/v, 3% w/v and 5% w/v gelatin to optimize the triad ratio for hydrogel formation. It was observed that a blend (C2-A0.5-G1 and C2-A1-G1) containing 2% w/v carboxymethyl cellulose, 0.5% or 1% w/v agarose and 1% w/v gelatin formed better hydrogels with higher stability for up to 21 days in DPBS at 37 °C. Further, C2-A0.5-G1 and C2-A1-G1hydrogels showed higher storage modulus 762 ± 182 Pa & 2452 ± 430 Pa, higher porosity of 96.98 ± 2% & 98.2 ± 0.8% and swellability of 1518 ± 68% & 1587 ± 25% respectively. To evaluate the in vitro potential of these bioink formulations, indirect and direct cytotoxicity were determined using NCTC clone 929 (mouse fibroblast cells) and HADF (primary human adult dermal fibroblast) cells as per the ISO 10993-5 standards. Importantly, the printability of these bioinks was confirmed using extrusion bioprinting by successfully printing different complex 3D patterns.

Multifunctional hydrogel wound dressing with rapid on-demand degradation property based on aliphatic polycarbonate and chitosan

The multifunctional hydrogel dressings are effective strategy to treat chronic wounds of diabetes. In addition, the ability of selective degradation on demand to change dressings could provide better patient compliance. Here, an injectable, self-healing hydrogel with rapid degradability on-demand is designed to promote the healing of diabetes wounds. The block copolymer formed by aldehyde modified aliphatic cyclic carbonate monomer with polyethylene glycol (MBP) and chitosan (CS) were crosslinked through the Schiff base bond to obtain a hydrogel with excellent injectability and self-healing ability. Due to the presence of carbonate bonds in MBP, it showed the rapid on-demand degradation characteristics triggered by N-acetylcysteine (NAC). At the same time, gallic acid (GA) was loaded into the hydrogel, giving the hydrogel dressing antioxidant. In vivo and in vitro experiments showed that the hydrogel wound dressing possesses good natures, such as antibacterial, antioxidant, and friendly cell compatibility, which could promote wound healing. Overall, the multifunctional hydrogel wound dressings with rapid on-demand degradation characteristics are more practical for clinical applications.

In situ photo-crosslinking silk fibroin based hydrogel accelerates diabetic wound healing through antibacterial and antioxidant

Bacterial infection and excessive reactive oxygen species (ROS) in diabetic wounds lead to a prolonged inflammatory phase, and injuries are highly susceptible to developing into chronic wounds. Improving the poor microenvironment is vital to achieving effective diabetic wound healing. In this work, methacrylated silk fibroin (SFMA) was combined with ε-polylysine (EPL) and manganese dioxide nanoparticles (BMNPs) to form an SF@(EPL-BM) hydrogel with in situ forming, antibacterial and antioxidant properties. EPL imparted high antibacterial activity (>96 %) to the hydrogel. BMNPs and EPL showed good scavenging activity against a variety of free radicals. SF@(EPL-BM) hydrogel had low cytotoxicity and could alleviate H₂O₂-induced oxidative stress in L929 cells. In diabetic wounds infected with Staphylococcus aureus (S. aureus), the SF@(EPL-BM) hydrogel exhibited better antibacterial properties and reduced wound ROS levels more significantly than that of the control in vivo. In this process, the pro-inflammatory factor TNF-α was down-regulated, and the vascularization marker CD31 was up-regulated. H&E and Masson staining showed a rapid transition from the inflammatory to the proliferative phase of the wounds, with significant new tissue and collagen deposition. These results confirm that this multifunctional hydrogel dressing holds well potential for chronic wound healing.

Amphiphilic Polypeptides Obtained by Post-Polymerization Modification of Poly-l-Lysine as Systems for Combined Delivery of Paclitaxel and siRNA

The development of effective anti-cancer therapeutics remains one of the current pharmaceutical challenges. The joint delivery of chemotherapeutic agents and biopharmaceuticals is a cutting-edge approach to creating therapeutic agents of enhanced efficacy. In this study, amphiphilic polypeptide delivery systems capable of loading both hydrophobic drug and small interfering RNA (siRNA) were developed. The synthesis of amphiphilic polypeptides included two steps: (i) synthesis of poly-αl-lysine by ring-opening polymerization and (ii) its post-polymerization modification with hydrophobic l-amino acid and l-arginine/l-histidine. The obtained polymers were used for the preparation of single and dual delivery systems of PTX and short double-stranded nucleic acid. The obtained double component systems were quite compact and had a hydrodynamic diameter in the range of 90-200 nm depending on the polypeptide. The release of PTX from the formulations was studied, and the release profiles were approximated using a number of mathematical dissolution models to establish the most probable release mechanism. A determination of the cytotoxicity in normal (HEK 293T) and cancer (HeLa and A549) cells revealed the higher toxicity of the polypeptide particles to cancer cells. The separate evaluation of the biological activity of PTX and anti-GFP siRNA formulations testified the inhibitory efficiency of PTX formulations based on all polypeptides (IC₅₀ 4.5-6.2 ng/mL), while gene silencing was effective only for the Tyr-Arg-containing polypeptide (56-70% GFP knockdown).

Exploring the Interplay of Antimicrobial Properties and Cellular Response in Physically Crosslinked Hyaluronic Acid/ε-Polylysine Hydrogels

The reduction of tissue cytotoxicity and the improvement of cell viability are of utmost significance, particularly in the realm of green chemistry. Despite substantial progress, the threat of local infections remains a concern. Therefore, hydrogel systems that provide mechanical support and a harmonious balance between antimicrobial efficacy and cell viability are greatly needed. Our study explores the preparation of physically crosslinked, injectable, and antimicrobial hydrogels using biocompatible hyaluronic acid (HA) and antimicrobial ε-polylysine (ε-PL) in different weight ratios (10 wt% to 90 wt%). The crosslinking was achieved by forming a polyelectrolyte complex between HA and ε-PL. The influence of HA content on the resulting HA/ε-PL hydrogel physicochemical, mechanical, morphological, rheological, and antimicrobial properties was evaluated, followed by an inspection of their in vitro cytotoxicity and hemocompatibility. Within the study, injectable, self-healing HA/ε-PL hydrogels were developed. All hydrogels showed antimicrobial properties against S. aureus, P. aeruginosa, E. coli, and C. albicans, where HA/ε-PL 30:70 (wt%) composition reached nearly 100% killing efficiency. The antimicrobial activity was directly proportional to ε-PL content in the HA/ε-PL hydrogels. A decrease in ε-PL content led to a reduction of antimicrobial efficacy against S. aureus and C. albicans. Conversely, this decrease in ε-PL content in HA/ε-PL hydrogels was favourable for Balb/c 3T3 cells, leading to the cell viability of 152.57% for HA/ε-PL 70:30 and 142.67% for HA/ε-PL 80:20. The obtained results provide essential insights into the composition of the appropriate hydrogel systems able to provide not only mechanical support but also the antibacterial effect, which can offer opportunities for developing new, patient-safe, and environmentally friendly biomaterials.

A Safe-by-Design Approach for the Synthesis of a Novel Cross-Linked Hyaluronic Acid with Improved Biological and Physical Properties

Hyaluronic acid (HA) is a polymer with unique biological properties that has gained in interest over the years, with applications in pharmaceutical, cosmetic, and biomedical fields; however, its widespread use has been limited by its short half-life. Therefore, a new cross-linked hyaluronic acid was designed and characterized using a natural and safe cross-linking agent, such as arginine methyl ester, which provided improved resistance to enzymatic action, as compared to the corresponding linear polymer. The antibacterial profile of the new derivative was shown to be effective against S. aureus and P. acnes, making it a promising candidate for use in cosmetic formulations and skin applications. Its effect on S. pneumoniae, combined with its excellent tolerability profile on lung cells, also makes this new product suitable for applications involving the respiratory tract.

Synergistic influence of tetraethyl orthosilicate crosslinker on mixed matrix hydrogels

Hydrogel is a 3D framework of hydrophilic polymeric material that quickly absorbs and retains a huge amount of water (or other fluid) and offers versatile functionality. A series of unique carboxymethyl cellulose/Xanthan gum/polyvinyl alcohol (CXP) blended hydrogels, containing both the natural and synthetic polymers, were prepared by following the blending and casting approach. The polymers were incorporated through chemical crosslinking by tetraethyl orthosilicate (TEOS). The fabricated hydrogels showed all required features: non-toxicity, biocompatibility, and improved mechanical strength. The addition and variation in TEOS (crosslinker) significantly impacted the key characteristics of CXP hydrogel. The scanning electron microscopy (SEM) images showed the porous structure and indicated that the pore's size and intensity were reduced with the surge in TEOS content. Fourier transform infrared spectroscopy (FTIR) results confirmed the successful incorporation of various polymeric strands through crosslinking by TEOS. The thermogravimetric analysis (TGA) highlighted the greater stability of all the hydrogels over high temperatures. The crosslinked hydrogel displayed higher thermal resilience than the uncross-linked one. The differential thermal analysis (DTA) also confirmed that the addition of TEOS content drastically enhanced the thermal endurance of crosslinked hydrogels in comparison with the neat hydrogel. All the specimens exhibited good swelling ability in distilled water during the swelling studies. This study also reflected that the addition of crosslinker in a limited amount (50 µL) has significantly enhanced the swelling but further increase in concentration hindered the water uptake. The swelling response of blends towards pH revealed low swelling of films in acidic and basic pH, but maximal swelling in neutral media. This unique pH response of hydrogels at neutral pH along with the biocompatibility made them suitable for injectable managed drug carrier.

Novel Trends in Hydrogel Development for Biomedical Applications: A Review

Nowadays, there are still numerous challenges for well-known biomedical applications, such as tissue engineering (TE), wound healing and controlled drug delivery, which must be faced and solved. Hydrogels have been proposed as excellent candidates for these applications, as they have promising properties for the mentioned applications, including biocompatibility, biodegradability, great absorption capacity and tunable mechanical properties. However, depending on the material or the manufacturing method, the resulting hydrogel may not be up to the specific task for which it is designed, thus there are different approaches proposed to enhance hydrogel performance for the requirements of the application in question. The main purpose of this review article was to summarize the most recent trends of hydrogel technology, going through the most used polymeric materials and the most popular hydrogel synthesis methods in recent years, including different strategies of enhancing hydrogels’ properties, such as cross-linking and the manufacture of composite hydrogels. In addition, the secondary objective of this review was to briefly discuss other novel applications of hydrogels that have been proposed in the past few years which have drawn a lot of attention.

Calcium Phosphate/Hyaluronic Acid Composite Hydrogels for Local Antiosteoporotic Drug Delivery

Despite the bone ability of self-regeneration, large bone defects require surgical intervention. Likewise, when it comes to osteoporotic bone fractures, new approaches should be considered a supportive mechanism for the surgery. In recent years, more and more attention has been attracted to advanced drug delivery systems for local osteoporosis treatment, combining appropriate biomaterials with antiosteoporotic drugs, allowing simultaneously to regenerate the bone and locally treat the osteoporosis. Within the current research, hyaluronic acid/strontium ranelate (HA/SrRan), HA/calcium phosphate nanoparticles (HA/CaP NPs), and HA/CaP NPs/SrRan hydrogels were prepared. The effect of CaP and SrRan presence in the composites on the swelling behavior, gel fraction, molecular structure, microstructure, and SrRan and Sr2+ release, as well as in vitro cell viability was evaluated. Obtained results revealed that the route of CaP nanoparticle incorporation into the HA matrix had a significant effect on the hydrogel gel fraction, rheological properties, swelling behavior, and microstructure. Nevertheless, it had a negligible effect on the release kinetics of SrRan and Sr2+. The highest cell (3T3) viability (>80%) was observed for HA hydrogels, with and without SrRan. Moreover, the positive effect of SrRan on 3T3 cells was also demonstrated, showing a significant increase (up to 50%) in cell viability if the used concentrations of SrRan were in the range of 0.05–0.2 μg/ml.