Polysaccharides improved the viscoelasticity, microstructure, and physical stability of ovalbumin-ferulic acid complex stabilized emulsion

Fabrication of high internal phase emulsions (HIPEs) using pea protein isolate-hyaluronic acid-tannic acid complexes: Application of curcumin-loaded HIPEs as edible inks for 3D food printing

Pea protein isolate (PPI)-hyaluronic acid (HA)-tannic acid (TA) ternary complexes were assembled using non-covalent interactions, their potential application in 3D printing and delivery of curcumin were investigated. As the HA-to-TA ratio in the complexes changed from 1:0 to 0:1, the oil-water interfacial tension first decreased and then increased, and the secondary structure of the proteins changed. The composition of the complexes (HA-to-TA ratio) was optimized to produce high internal phase emulsions (HIPEs) containing small uniform oil droplets with good storage and thermal stability. When the HA to TA ratio is 7:1 (P-H7-T1), HIPEs exhibited better viscosity, viscoelasticity, and thixotropy, which contributed to its preferable 3D printing. Moreover, curcumin-loaded HIPEs stabilized by P-H7-T1 showed a high lipid digestibility (≈101%) and curcumin bioaccessibility (≈79%). In summary, the PPI-HA-TA-stabilized HIPEs have good potential to be 3D-printable materials that could be loaded with bioactive components.

Physicochemical, structural and metabolic products of yogurt as affected by Coriolus versicolor fermented sweet potato pulp water

Sweet potato pulp water (SPPW) is a kind of sweet potato starch processing by-product with rich nutrition but low utilization. The impacts of different proportions of Coriolus versicolor (C. versicolor, CV) fermented sweet potato pulp water (CV-SPPW) on the physicochemical, structural and metabolic properties of yogurt were investigated. Compared with 0% group, the hardness index, elasticity index and cohesion of the 10% sample group increased by 1.9-fold, 55.7% and 1.39-fold, respectively. When CV-SPPW was added at an amount of 10%, the microstructure and sensory scores of yogurts were considered as the optimal. Metabolic pathway analysis indicated that the changes of yogurts were mainly involved in sugar metabolism and amino acid metabolism, and that the carbohydrate metabolites produced mainly included cellobiose, maltitol, d-trehalose and d-maltose. The CV-SPPW improved the structural characteristics of yogurts to varying degrees and the fermented yogurts exhibited better viscosity properties.

Effects of polysaccharides on colonic targeting and colonic fermentation of ovalbumin-ferulic acid based emulsion

Rutin is a polyphenol with beneficial pharmacological properties. However, its bioavailability is often compromised due to low solubility and poor stability. Encapsulation technologies, such as emulsion systems, have been proven to be promising delivery vehicles for enhancing the bioavailability of bioactive compounds. Thus, this study was proposed and designed to investigate the colonic targeting and colonic fermentation characteristics of rutin-loaded ovalbumin-ferulic acid-polysaccharide (OVA-FA-PS) complex emulsions. The results indicate that OVA-FA-PS emulsion effectively inhibits the degradation of rutin active substances and facilitates its transport of rutin to the colon. The analysis revealed that the OVA-FA-κ-carrageenan emulsion loaded with rutin exhibited superior elasticity and colon targeting properties compared to the OVA-FA-hyaluronic acid or OVA-FA-sodium alginate emulsions loaded with rutin in the composite emulsion. Additionally, it was observed that the rutin loaded within the OVA-FA-κ-carrageenan emulsion underwent degradation and was converted to 4-hydroxybenzoic acid during colonic fermentation.

The Inhibitory Impact of a Co-Assembly Gel with Natural Carrier-Free Binary Small Molecules, as Used in Traditional Chinese Medicine, on the Viability of SW1990 Cells

Chinese herbs are a huge treasure trove of natural products and an important source of many active molecules. The theory of traditional Chinese medicine compatibility (TCMC) is widely applied in clinical practice, but its mechanism is still ambiguous. This study aims to open a new window for this predicament by studying the interaction between the main active ingredients from a drug pair. Carrier-free assembly of natural products improves the shortcomings of traditional nanodelivery systems and opens a new path for the development of new nanomaterials. The drug pair "Pueraria and Hedyotis diffusa" has been commonly used in clinical practice, with a predominant therapeutic effect. This study is devoted to the study of the binary small molecule co-assembly of the main active molecules from the drug pair. In this study, we introduce a carrier-free composite gel, formed by the co-assembly of puerarin (PUE) and deacetylasperulosidic acid (DAA) via non-covalent bonds including π-π packing, intermolecular hydrogen bonding, and C=O π interactions. With a strain point 7-fold higher than that of P gel, the P - D gel exhibited favorable rheological properties. The survival rate of SW1990 cells in the P - D group was only 21.39% when the concentration of administration reached 200 μM. It thus demonstrated activity in inhibiting SW1990 cells' survival, suggesting potential in combating pancreatic cancer. Furthermore, this research offers a valuable concept for enhancing the mechanical properties and bioactivity of hydrogel materials through the utilization of a multi-component natural small molecule co-assembly approach. More importantly, this provides new ideas and methods for the treatment of pancreatic cancer and the analysis of traditional Chinese medicine compatibility theory.

Enhancing the stability of O/W emulsions by the interactions of casein/carboxymethyl chitosan and its application in whole nutrient emulsions

The influence of Carboxymethyl chitosan (CMCS) on the emulsification stability mechanism of casein (CN) and its effects on the stability of whole nutrient emulsions were investigated. The complex solutions of CN and CMCS were prepared and the turbidity, ultraviolet (UV) absorption spectrum, fluorescence spectrum, circular dichroism (CD) spectrum, Fourier transform infrared (FTIR) spectrum, interfacial tension and microstructural observations were used to study the inter-molecular interaction of CMCS and CN. The effects of CMCS on the emulsion stability of CN were further analyzed by particle size, ζ-potential, instability index and rheological properties. Moreover, the accelerated stability of whole nutrient emulsions prepared by CMCS and CN was evaluated. The results revealed that CN-CMCS complexes were mainly formed by hydrogen bonding. The stability of the CN-CMCS composite emulsions were improved, as evidenced by the interfacial tension decreasing from 165.96 mN/m to 158.49 mN/m, the particle size decreasing from 45.85 μm to 12.98 μm, and the absolute value of the potential increasing from 29.8 mV to 33.5 mV. The stability of whole nutrient emulsion was also significantly enhanced by the addition of CN-CMCS complexes. Therefore, CN-CMCS complex could be served as a novel emulsifier to improve the stability of O/W emulsions.

Fabrication, structure, characterization and emulsion application of citrate agar

In this study, citric acid successfully reacted with agar through the dry heat method, and citrate agar (CA) gel was used to stabilize O/W emulsions. The mechanisms of the CA structure and emulsion pH that affected emulsion stabilization were analyzed, and the application of CA gel emulsion (CAGE) was explored. Compared with native agar (NA), CA showed lower gel strength, higher transparency, and higher water contact angle. These changes indicate that a cross-linking reaction occurred, and it was demonstrated via FTIR and NMR. The emulsion properties were evaluated using particle size, ζ-potential, and the emulsification activity index. Results showed that CAGEs had a smaller particle size and lower ζ-potential than the native agar gel emulsion (NAGE). Meanwhile, confocal laser scanning microscopy confirmed that the CA gels stabilized the emulsions by forming a protective film around the oil droplets. Stability experiments revealed that CAGE (prepared with CA gel [DS = 0.145]) exhibited better stability than NAGE in the pH range of 3-11, and the rheological results further confirmed that the stability of the emulsions was influenced by the network structure and oil droplet interaction forces. Afterward, the application prospect of CAGE was evaluated by encapsulating vitamin D3 and curcumin.

Ovotransferrin Fibril-Gum Arabic Complexes as Stabilizers for Oleogel-in-Water Pickering Emulsions: Formation Mechanism, Physicochemical Properties, and Curcumin Delivery

This project aimed to explore the influence of the interaction between ovotransferrin fibrils (OTF) and gum arabic (GA) on the formation mechanism, physicochemical properties, and curcumin delivery of the oleogel-in-water Pickering emulsion. Cryo-scanning electron microscopy results showed that OTF-GA complexes effectively adsorbed on the oil-water interface, generating spatial hindrance to inhibit droplet coalescence. The texture analysis also proved that OTF-GA complexes endowed oleogel-in-water Pickering emulsion with preferable springiness (0.49 ± 0.03 mm), chewiness (0.43 ± 0.07 mJ), and adhesion (0.31 ± 0.01 mJ). By exploring the coalescence stability, droplet size, and rheological properties of OTF-GA complexes-stabilized oleogel-in-water Pickering emulsion (OGPE), the higher coagulation stability, larger average droplet size (46.22 ± 0.08 μm), and stronger gel strength were observed. The microrheological results also exhibited stronger attraction between the OGPE droplets, a more pronounced solid-like structure, and a slower speed of movement than OTF-stabilized oleogel-in-water Pickering emulsion (OPE). Meanwhile, OGPE significantly enhanced the extent of lipolysis, stability, and bioaccessibility of curcumin, suggesting that it possessed superior performance as a delivery system for bioactive substances. This project provided adequate theoretical references for protein-polysaccharide complexes-stabilized oleogel-in-water Pickering emulsion, and contributed to expanding the application of oleogel-in-water Pickering emulsion in the food industry.

Protein-stabilized Pickering emulsion interacting with inulin, xanthan gum and chitosan: Rheological behavior and 3D printing

Physical stability and lipid digestion of protein-stabilized Pickering emulsions interacting with polysaccharides have been emphasized in our previous investigation. However, the polysaccharide coating and micelle protection of protein-based stable Pickering emulsion and its three-dimensional (3D) printing properties have not been thoroughly studied. The rheological properties and 3D printing properties of gelatin-catechin nanoparticles (GCNPs) stabilized Pickering emulsion were studied by using different charged polysaccharides, such as inulin (neutral), Xanthan gum (XG, anion), and chitosan (cation) as stable materials. The microstructure analysis of polysaccharide-stabilized Pickering emulsion (PSPE) showed that the order of pore wall thickness was GC-Chitosan > GC-XG > GC-Inulin. The network structure of GC-Chitosan was thickened, allowing the 3D printed product to have a good surface texture and adequate support. Rheological analysis showed that PSPEs in extrusion (shear thinning), self-support (rigid structure), and recovery (the outstanding thixotropy) of the three stages exhibited good potential of 3D printing. 3D printing results also showed that GC-Chitosan had the best printing performance. Therefore, polysaccharide-stabilized Pickering emulsions can provide a basis for the development of 3D printed food products.

Gel properties and interactions of hydrogels constructed with low acyl gellan gum and puerarin

To develop composite hydrogels based on low acyl gellan gum (GG), the effect of puerarin (PUE) on the gel properties of GG was investigated. The results showed that the maximum storage modulus (G') of the 1.2 % GG/0.8 % PUE composite hydrogel was 377.4 Pa at 0.1 Hz, which was enhanced by 4.7-fold compared with that of 1.2 % GG. The melting temperature of this composite hydrogel increased from 74.1 °C to >80.0 °C. LF-NMR results showed that a significant amount of free water was present in the hydrogel matrix. The surface structure aggregation and the shrinkage of the honeycomb meshes in the composite hydrogel proved the cross-linking of PUE and GG. XRD, FTIR and molecular simulation results illustrated that hydrogen bonds were the most important factor controlling the interaction between GG and PUE. Thus, the GG/PUE composite hydrogel has good elasticity, thermal stability and water retention, which lays a good foundation for further application in the food industry.

The Effect of Ionic Strength on the Formation and Stability of Ovalbumin-Xanthan Gum Complex Emulsions

Protein-polysaccharide complexes have been widely used to stabilize emulsions, but the effect of NaCl on ovalbumin-xanthan gum (OVA-XG) complex emulsions is unclear. Therefore, OVA-XG complex emulsions with different XG concentrations at pH 5.5 were prepared, and the effects of NaCl on them were explored. The results indicated that the NaCl significantly affected the interaction force between OVA-XG complexes. The NaCl improved the adsorption of proteins at the oil-water interface and significantly enhanced emulsion stability, and the droplet size and zeta potential of the emulsion gradually decreased with increasing NaCl concentrations (0-0.08 M). In particular, 0.08 M NaCl was added to the OVA-0.2% XG emulsion, which had a minimum droplet size of 18.3 μm. Additionally, XG as a stabilizer could improve the stability of the emulsions, and the OVA-0.3% XG emulsion also exhibited good stability, even without NaCl. This study further revealed the effects of NaCl on emulsions, which has positive implications for the application of egg white proteins in food processing.

Konjac glucomannan-dihydromyricetin complex improves viscosity and hydration capacity of konjac glucomannan as well as the thermal stability of dihydromyricetin

The nutritional benefits of soluble dietary fiber were mainly attributed to its viscosity and hydration capacity. This study was aimed to investigate the effects of the interaction between konjac glucomannan (KGM) and dihydromyricetin (DMY) on the viscosity and hydration capacity of KGM and the thermal stability of DMY. In contrary to most reports, the addition of DMY to KGM resulted in an increase of viscosity and hydration capacity determined via rheology and nuclear magnetic resonance spectroscopy characterization. Meanwhile the prototype retention of DMY in the presence of heating condition at 60 °C and 100 °C were improved. The radical scavenging capacity of DMY under heating condition was improved at 100 °C via the quantification of ABTS⁺ and DPPH. KGM-DMY complex was a non-covalent compound connected by hydrogen bonds which was characterized with particle size analyses, zeta potential analyses, transmission electron microscopy, infrared spectroscopy, X-ray diffraction, and isothermal titration calorimetry. This study was beneficial to the development of polyphenol-enriched nutrition based on KGM, especially in the aspects of satiety, appetite regulation and glucose regulation.

Allergenicity, assembly and applications of ovalbumin in egg white: a review

Ovalbumin (OVA), the most abundant protein in egg whites, has been widely used in various industries. Currently, the structure of OVA has been clearly established, and the extraction of high-purified OVA has become feasible. However, the allergenicity of OVA is still a serious problem because it can cause severe allergic reactions and may even be life-threatening. The structure and allergenicity of the OVA can be altered by many processing methods. In this article, a detailed description on the structure and a comprehensive overview on the extraction protocols and the allergenicity of OVA was documented. Additionally, the information on assembly and potential applications of OVA was summarized and discussed in detail. Physical treatment, chemical modification, and microbial processing can be applied to alter the IgE-binding capacity of OVA by changing its structure and linear/sequential epitopes. Furthermore, research indicated that OVA could assemble with itself or other biomolecules into various forms (particles, fibers, gels, and nanosheets), which expanded its application in the food field. OVA also shows excellent application prospects, including food preservation, functional food ingredients and nutrient delivery. Therefore, OVA demonstrates significant investigation value as a food grade ingredient.

Pentacyclic triterpene-loaded emulsion stabilized by Agaricus blazei Murill polysaccharides: Factorial design and cytoprotection study

In this study, pentacyclic triterpene-loaded emulsions were stabilized by polysaccharides from Agaricus blazei Murill mushroom (PAb). The drug-excipient compatibility results by Fourier Transform Infrared Spectroscopy (FTIR) and Differential Scanning Calorimetry (DSC) showed the absence of physicochemical incompatibilities. The use of these biopolymers at 0.75 % led to obtaining emulsions with droplets smaller than 300 nm, moderate polydispersity, and ζ-potential >30 mV in modulus. The emulsions presented high encapsulation efficiency, suitable pH for topical application, and absence of macroscopic signs of instability during 45 days. Morphological analysis suggested the deposition of thin layers of PAb around the droplets. The encapsulation of pentacyclic triterpene in emulsions, stabilized by PAb, improved the cytocompatibility of this drug against PC12 and murine astrocyte cells. There was a reduction in cytotoxicity, which resulted in a lower accumulation of intracellular reactive oxygen species and maintenance of the mitochondrial transmembrane potential. Based on these results, it is estimated that PAb are promising biopolymers for the emulsions' stabilization by improving their physicochemical and biological properties.

Novel Colloidal Food Ingredients: Protein Complexes and Conjugates

Food proteins, polysaccharides, and polyphenols are natural ingredients with different functional attributes. For instance, many proteins are good emulsifiers and gelling agents, many polysaccharides are good thickening and stabilizing agents, and many polyphenols are good antioxidants and antimicrobials. These three kinds of ingredients can be combined into protein, polysaccharide, and/or polyphenol conjugates or complexes using covalent or noncovalent interactions to create novel multifunctional colloidal ingredients with new or improved properties. In this review, the formation, functionality, and potential applications of protein conjugates and complexes are discussed. In particular, the utilization of these colloidal ingredients to stabilize emulsions, control lipid digestion, encapsulate bioactive ingredients, modify textures, and form films is highlighted. Finally, future research needs in this area are briefly proposed. The rational design of protein complexes and conjugates may lead to the development of new functional ingredients that can be used to create more nutritious, sustainable, and healthy foods.

Collagen hydrolysates improve the efficiency of sodium alginate-encapsulated tea polyphenols in beads and the storage stability after commercial sterilization

This study showed that sodium alginates (SA)-based beads reinforced with collagen hydrolysates (CHs) significantly increased an encapsulation rate of tea polyphenols (TP) from 34.54 % to 85.06 % when the mass ratio of SA: CHs increased from1.5:0 to 1.5:0.5. And after the 30-day storage at 37 °C, the retention rate of TP in beads with CHs at the solutions with pH = 4.0 or pH = 7.0 increased from 61.10 % to 80.21 %, or from 67.72 % to 80.47 % after sterilization at 98 °C or 121 °C for 30 min, respectively. Also, the addition of CHs at 0.5 % resulted in a greater retention of the polyphenolic compositions values of TP determined by UPLC-Orbitrap-MS system. Additionally, the DPPH and ABTS⁺ free-radical scavenging capacities and ferric-reducing antioxidant power of beads with CHs after sterilization at 98 °C or 121 °C for 30 min were significantly higher than which without CHs. Physical phenomena based on ζ-potential, particle size, fluorescence, UV spectroscopy and confocal laser scanning microscope showed that tightly non-covalent complexes of CHs in combination to TP could be uniformly and stably distributed in the network of SA solution for encapsulating TP in SA-based beads. These findings provided suggestions for the co-encapsulation design and development of hydrophilic nutritive compounds based on CHs in SA-based beads.

Effect of chitosan-protocatechuic acid conjugate on stability and encapsulation capacity of polysaccharide-based high internal phase emulsion

The aim of this work was to fabricate chitosan-protocatechuic acid (CSPA) conjugates by free radical grafting method and use them as novel emulsifiers to inhibit lipid oxidation and delay the photodegradation rate of curcumin in polysaccharide-based high internal phase emulsions (HIPEs). Results of UV-vis, FT-IR and ¹H NMR spectra demonstrated that PA had been successfully bonded to chitosan (CS) through ester and amino linkages. CSPA conjugates (especially those with the ratio of CS to PA of 1:0.75) showed significantly increased water solubility and antioxidant activity than CS monomer. Furthermore, compared with sole OSA starch (OSAS), the electrostatic combination of CS and CSPA conjugate with OSAS could further reduce the interfacial tension, which was conducive to their adsorption at the oil-water interface. The introduction of CS and CSPA conjugate also increased the viscosity of aqueous phase and promoted the formation of gel-like percolating network structure, thereby effectively preventing droplets coalescence and endowing HIPEs with ideal viscoelasticity. More importantly, the contents of lipid hydroperoxide (24.09 μmol/g oil) and malondialdehyde (166.71 nmol/g oil) in HIPEs prepared by OSAS-CS-CSPA complexes were lower than those stabilized by OSAS, OSAS-CS and OSAS-CSPA complexes during accelerated storage. In addition, HIPEs prepared by OSAS-CS-CSPA complexes showed stronger protection capacity on curcumin against ultraviolet irradiation and natural light degradation. This study will provide useful information and technical reference for the fabrication of antioxidant polysaccharide-based HIPEs delivery vehicles.

Effects of the molecular weight of hyaluronan on the conformation and release kinetics of self-assembled 5-fluorouracil-loaded lysozyme-hyaluronan colloidal nanoparticles

Lysozyme (LYS) and hyaluronan with low (HA1: 3 kDa), medium (HA2: 120 kDa), and high (HA3: 1200 kDa) molecular weights were used to fabricate lysozyme-hyaluronan colloidal nanoparticles using a green self-assembly method. Fourier transform infrared spectroscopy indicated that hydrogen bonding, hydrophobic and electrostatic interactions promoted the formation of the colloidal nanoparticles. The hydrophobic area of prepared colloidal nanoparticles was quantified using a pyrene fluorescent probe, and the results showed that the LYS-HA3 nanoparticles had the strongest hydrophobic capacity. Furthermore, 5-fluorouracil (5-Fu) was used to evaluate encapsulation performance, demonstrating that the LYS-HA3 nanoparticles had the highest encapsulation ability (>90 %). All prepared 5-Fu-loaded lysozyme-hyaluronan (5-Fu@LYS-HA) colloidal nanoparticles exhibited excellent long-term storage stability at 4 °C for 60 days. Cellular uptake and in vitro release results indicated that the LYS-HA2 nanoparticles exhibited the highest cellular uptake efficiency, and the LYS-HA3 nanoparticles had the best slow-release effect, while the release process was mainly controlled by the combination of Fickian diffusion and structural relaxation, respectively. This study demonstrates the influence of molecular weight on the conformational and structural properties of colloidal nanoparticles, which has implications for the design of insoluble drug self-assembly systems.