High efficient adsorption for thorium in aqueous solution using a novel tentacle-type chitosan-based aerogel: Adsorption behavior and mechanism

Efficient Recovery of Rare Earth Elements from Acidic Wastewater by a Green β-CDs-Functionalized Nanosponge

The recovery of rare earth elements (REEs) from acidic wastewater is crucial to sustainable development, industrial processes, and human health. In this research, β-cyclodextrin-based nanosponges (β-CD/PVA-SA NSs) have been proposed as potential adsorbents for europium (Eu), dysprosium (Dy), and gadolinium (Gd) recovery. The nanosponges are synthesized by cross-linking β-cyclodextrin (β-CD) functionalized polyvinyl alcohol (PVA) and sodium alginate (SA). Experimental results indicate that β-CD/PVA-SA NSs exhibit favorable selectivity for Eu, Dy, and Gd, with the maximum adsorption capacity of 222, 217, and 204 mg/g, respectively, in addition to stability and cyclicity. β-CD/PVA-SA NSs maintain selective adsorption effects towards RE ions that are present in acidic mine drainage (AMD), thereby highlighting their potential for practical applications. Furthermore, density functional theory (DFT) simulations have unveiled the fundamental interactions between the functional groups anchored in β-CD/PVA-SA NSs and the REEs, providing vital insights into their adsorption mechanism. Hence, the utilization of β-CD/PVA-SA NSs has the potential to advance initiatives in remediating acidic water pollution and facilitating the sustainable recycling of RE resources.

One-step synthesis of phospho-rich, silica-enhanced chitosan aerogel for the efficient adsorption of uranium(VI)

In this study, an amorphous silica reinforced, phosphoric-crosslinked chitosan foam (P-CTS@SixOy) was prepared. The introduction of amorphous silica not only increased the affinity of the adsorbent for uranium, but also improved the stability of the material. The number of active sites of P-CTS@SixOy was increased by the introduction of phosphate groups. The material exhibited excellent uranium adsorption performance with the removal capacity and efficiency of 850.5 mg g-1 and 98.1 %, respectively. After regenerations, the morphology of P-CTS@SixOy still maintained, and the uranium adsorption efficiency remained above 90 %, manifesting the excellent cycle performance of P-CTS@SixOy. In the dynamic adsorption experiment, P-CTS@SixOy successfully concentrated the volume of uranium-containing solution, and exhibited excellent uranium adsorption performance. The analysis of kinetics, isotherms, and thermodynamics manifested that the uranium adsorption behavior of P-CTS@SixOy was a spontaneous, endothermic, monolayer chemical adsorption process. X-ray photoelectron spectroscopy, Scanning Electron Microscope, and Fourier Transform Infrared Spectrometer were used to characterized the P-CTS@SixOy before and after adsorption, which demonstrated that the main interaction mechanism between uranium and P-CTS@SixOy was the complexation. These studies indicated the huge application prospect of P-CTS@SixOy in the treatment of large-scale uranium-containing wastewater.

Bifunctional solid-state ionic liquid supported amidoxime chitosan adsorbents for Th(IV) and U(VI): Enhanced adsorption capacity from the synergistic effect

Uranium and thorium of symbiotic relationship commonly appear in one kind of raw or spent ore. The simultaneous enrichment toward both metals in the first step is essential during many hydrometallurgy processing. Therefore bifunctional solid-state ionic liquid supported amidoxime chitosan (ACS) adsorbents were developed to simultaneously adsorb the two metal from the aqueous solution. The adsorption capacity of the bifunctional adsorbents toward uranium and thorium were significantly superior to the ionic liquid-free amidoxime chitosan, obviously proving the synergistic effect. For both uranium and thorium, the adsorption capacity in the consequence of ACS-[N4444][DEHP], ACS-[N4444][EHEHP], ACS-[N1888][DEHP] and ACS-[N1888][EHEHP] prove the steric effect and PO bonding played important roles in the adsorption. Study on isotherms and kinetics demonstrated the adsorption of ionic liquid-ACS adopted monolayer and chemical way. The ΔGo of very small negative values highlighted ionic liquid-ACS were prone to adsorb uranium and thorium. The study showed feasibility of bifunctional solid-state ionic liquid supported amidoxime chitosan adsorbents for Th(IV) and U(VI).

Bio-based functionalized adsorptive polymers for sustainable water decontamination: A systematic review of challenges and real-world implementation

The overwhelming concerns of water pollution, industrial discharges and environmental deterioration by various organic and inorganic substances, including dyes, heavy metals, pesticides, pharmaceuticals, and detergents, intrinsically drive the search for urgent and efficacious decontamination techniques. This review illustrates the various approaches to remediation, their fundamentals, characteristics and demerits. In this manner, the advantageous implementation of nature-based adsorbents has been outlined and discussed. Different types of lignocellulosic compounds (cellulose, lignin, chitin, chitosan, starch) have been introduced, and the most used biopolymeric materials in bioremediation have been highlighted; their merits, synthesis methods, properties and performances in aqueous medium decontamination have been described. The literature assessment reveals the genuine interest and dependence of academic and industrial fields to valorize biopolymers in the adsorption of various hazardous substances. Yet, the full potential of this approach is still confined by certain constraints, such as the lack of reliable, substantial, and efficient extraction of biopolymers, as well as their modest and inconsistent physicochemical properties. The futuristic reliance on such biomaterials in all fields, rather than adsorption, is inherently reliable on in-depth investigations and understanding of their features and mechanisms, which can guarantee a real-world application and green technologies.

Simultaneous ammonium and phosphate removal with Mg-loaded chitosan carbonized microsphere: Influencing factors and removal mechanism

A novel Mg-loaded chitosan carbonized microsphere (MCCM) was prepared for simultaneous adsorption of ammonium and phosphate in this study, through the investigation of preparation procedures, addition ratio, and preparation temperature. Pollutants removals by MCCM were more acceptable with 64.71% for ammonium and 99.26% for phosphorus, compared with chitosan carbonized microspheres (CCM), Mg-loaded chitosan hydrogel beads (MCH) and MgCl₂·6H₂O. Addition ratio of 0.6:1 (m_chitosan: m_MgCl2) and preparation temperature of 400 °C in MCCM preparation were responsible for pollutant removal and yield. The effect analysis of MCCM dosage, solution pH, pollutant concentration, adsorption mode and coexisting ions on the removal for both ammonium and phosphate indicated that pollutants removals were increased with increasing MCCM dosages, and achieved the peak at pH 8.5, but presented to be stable with Na⁺, K⁺, Ca²⁺, Cl^-, NO₃^-, CO₃^2- and SO₄^2-, except for Fe³⁺.Adsorption mechanisms discussion implied that simultaneous ammonium and phosphate removal with MCCM was attributed to struvite precipitation, ion exchange, hydrogen bonding, electrostatic attraction and Mg-P complexation, suggesting that MCCM presents a new way for simultaneous concentrated ammonium and phosphate removal in wastewater treatment.

Effective adsorption of Orange G dye using chitosan cross-linked by glutaraldehyde and reinforced with quartz sand

In this study, quartz sand (QS) incorporated into a crosslinked chitosan-glutaraldehyde matrix (QS@Ch-Glu) was prepared and employed as an efficient adsorbent for the elimination of Orange G (OG) dye from water. The sorption process is adequately described by the pseudo-second order kinetic model and the Langmuir isotherm model with maximum adsorption capacities of 172.65, 188.18, and 206.65mg/g at 25, 35, and 45 °C, respectively. A statistical physics model was adopted to elucidate the adsorption mechanism of OG on QS@Ch-Glu. Calculated thermodynamic factors revealed that the adsorption of OG is endothermic, spontaneous, and occurs via physical interactions. Overall, the proposed adsorption mechanism was based on electrostatic attractions, n-π stacking interaction, hydrogen bonding interaction, and Yoshida hydrogen bonding. The adsorption rate of QS@Ch-Glu was still above 95 % even after 6 cycles of adsorption and desorption. Furthermore, QS@Ch-Glu demonstrated high efficiency in real water samples. All these findings demonstrate that QS@Ch-Glu is qualified for practical applications.

Preparation of Mannitol-Modified Loofah and Its High-Efficient Adsorption of Cu(II) Ions in Aqueous Solution

Adsorption is considered the most favorable method for heavy metal removal. In this paper, a low-cost, high-efficiency heavy metal adsorbent, mannitol-modified loofah (MML) was prepared. Some characterization methods are used to characterize the structure of MML, such as Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The adsorption behavior of MML for Cu(II) ions was explored under different conditions, such as the amount of adsorbent, pH, initial concentration of Cu(II) ions, and adsorption time. The results indicated that the adsorption capacity of MML for Cu(II) ions was greatly improved. When the initial concentration of Cu(II) ions was 900 mg/L and the pH is 5.0, the adsorption capacity (Q_e) was 888.9 mg/g at 298K, which was significantly higher than that of some other modified cellulose adsorbents. Isothermal adsorption results showed that the adsorption process was consistent with the Freundlich model. The adsorption kinetics conformed to the pseudo-second-order equation. Furthermore, the regeneration capability of MML indicates that MML is a cheap and excellent adsorbent for Cu(II) ions removal in wastewater treatment.