Tomato based gelatin methacryloyl hydrogel as an effective natural and low-cost scaffold for accelerative wound healing

Lignin hydrogel sensor with anti-dehydration, anti-freezing, and reproducible adhesion prepared based on the room-temperature induction of zinc chloride-lignin redox system

In recent years, flexible sensors constructed mainly from hydrogels have received increasing attention. However, conventional hydrogels need to be prepared by high-temperature or radiation-induced polymerization reactions, which limits their practical applications due to their suboptimal electrical conductivity and weak mechanical properties. In this paper, using sodium lignosulfonate as the raw material, a dynamic catechol-quinone redox system formed by lignin‑zinc ions was constructed to initiate rapid free radical polymerization of acrylamide (AM) monomer at room temperature. In addition, Deep eutectic solvent (DES) can form a strong hydrogen bonding network within the molecules and between the molecules of the hydrogel, resulting in a hydrogel with good tensile properties (hydrogel elongation at break of 727.19 %, breaking strength of 84.09 kPa), and provides the hydrogel with high electrical conductivity, anti-dehydration, anti-freezing, and anti-bacterial properties. Meanwhile, the addition of lignin also improved the adhesion and UV resistance of the hydrogel. This hydrogel assembled into a flexible sensor can sense various small and large amplitude movements such as nodding, smiling, frowning, etc., and has a wide range of applications in flexible sensors.

Recent Advances in Degradable Biomedical Polymers for Prevention, Diagnosis and Treatment of Diseases

Biomedical polymers play a key role in preventing, diagnosing, and treating diseases, showcasing a wide range of applications. Their unique advantages, such as rich source, good biocompatibility, and excellent modifiability, make them ideal biomaterials for drug delivery, biomedical imaging, and tissue engineering. However, conventional biomedical polymers suffer from poor degradation in vivo, increasing the risks of bioaccumulation and potential toxicity. To address these issues, degradable biomedical polymers can serve as an alternative strategy in biomedicine. Degradable biomedical polymers can efficiently relieve bioaccumulation in vivo and effectively reduce patient burden in disease management. This review comprehensively introduces the classification and properties of biomedical polymers and the recent research progress of degradable biomedical polymers in various diseases. Through an in-depth analysis of their classification, properties, and applications, we aim to provide strong guidance for promoting basic research and clinical translation of degradable biomedical polymers.

Cost-effective and natural-inspired lotus root/GelMA scaffolds enhanced wound healing via ROS scavenging, angiogenesis and reepithelialization

Skin wounds, prevalent and fraught with complications, significantly impact individuals and society. Wound healing encounters numerous obstacles, such as excessive reactive oxygen species (ROS) production and impaired angiogenesis, thus promoting the development of chronic wound. Traditional clinical interventions like hemostasis, debridement, and surgery face considerable challenges, including the risk of secondary infections. While therapies designed to scavenge excess ROS and enhance proangiogenic properties have shown effectiveness in wound healing, their clinical adoption is hindered by high costs, complex manufacturing processes, and the potential for allergic reactions. Lotus root, distinguished by its natural micro and macro porous architecture, exhibits significant promise as a tissue engineering scaffold. This study introduced a novel scaffold based on hybridization of lotus root-inspired and Gelatin Methacryloyl (GelMA), verified with satisfactory physicochemical properties, biocompatibility, antioxidative capabilities and proangiogenic abilities. In vivo tests employing a full-thickness wound model revealed that these scaffolds notably enhanced micro vessel formation and collagen remodeling within the wound bed, thus accelerating the healing process. Given the straightforward accessibility of lotus roots and the cost-effective production of the scaffolds, the novel scaffolds with ROS scavenging, pro-angiogenesis and re-epithelialization abilities are anticipated to have clinical applicability for various chronic wounds.

Biomaterials as a new option for treating sensorineural hearing loss

Sensorineural hearing loss (SNHL) usually involves damage to complex auditory pathways such as inner ear cells and auditory nerves. The highly intricate and nuanced characteristics of these cells render their repair and regeneration extremely challenging, making it difficult to restore hearing to normal levels once it has been compromised. The effectiveness of traditional drugs is so minimal that they provide little help with the treatment. Fortunately, extensive experiments have demonstrated that combining biomaterials with conventional techniques significantly enhances drug effectiveness. This article reviews the research progress of biomaterials in protecting hair cells and the auditory nerve, repairing genes related to hearing, and developing artificial cochlear materials. By organizing the knowledge presented in this article, perhaps new insights can be provided for the clinical management of SNHL.

Advances of antimicrobial dressings loaded with antimicrobial agents in infected wounds

Wound healing is a complex process that is critical for maintaining the barrier function of the skin. However, when a large quantity of microorganisms invade damaged skin for an extended period, they can cause local and systemic inflammatory responses. If left untreated, this condition may lead to chronic infected wounds. Infected wounds significantly escalate wound management costs worldwide and impose a substantial burden on patients and healthcare systems. Recent clinical trial results suggest that the utilization of effective antimicrobial wound dressing could represent the simplest and most cost-effective strategy for treating infected wounds, but there has hitherto been no comprehensive evaluation reported on the efficacy of antimicrobial wound dressings in promoting wound healing. Therefore, this review aims to systematically summarize the various types of antimicrobial wound dressings and the current research on antimicrobial agents, thereby providing new insights for the innovative treatment of infected wounds.

Deferoxamine-Loaded Injectable Chitosan-Grafted Chlorogenic Acid/Oxidized Hyaluronic Acid Hybrid Hydrogel with Antibacterial, Anti-inflammatory, and Angiogenesis-Promoting Properties for Diabetic Wound Repair

Diabetic chronic wounds are notoriously difficult to heal as a result of their susceptibility to infection. To address this issue, we constructed an innovated and adaptable solution in the form of injectable chitosan (CS) hydrogel, denoted as CCOD, with enhanced antibacterial and anti-inflammatory properties. This hydrogel is created through a Schiff base reaction that combines chitosan-grafted chlorogenic acid (CS-CGA) and oxidized hyaluronic acid (OHA) with deferoxamine (DFO) as a model drug. The combination of CS and CGA has demonstrated excellent antibacterial and anti-inflammatory properties, while grafting played a pivotal role in making these positive effects stable. These unique features make it possible to customize injectable hydrogel and fit any wound shape, allowing for more effective and personalized treatment of complex bacterial infections. Furthermore, the hydrogel system is not only effective against inflammation and bacterial infections but also possesses antioxidant and angiogenic abilities, making it an ideal solution for the repair of chronic wounds that have been previously thought of as unmanageable.

3D-printed electrospun fibres for wound healing

Wound management for acute and chronic wounds has become a serious clinical problem worldwide, placing considerable pressure on public health systems. Owing to the high-precision, adjustable pore structure, and repeatable manufacturing process, 3D-printed electrospun fibre (3DP-ESF) has attracted widespread attention for fabricating wound dressing. In addition, in comparison with 2D electrospun fibre membranes fabricated by traditional electrospinning, the 3D structures provide additional guidance on cell behaviour. In this perspective article, we first summarise the basic manufacturing principles and methods to fabricate 3DP-ESF. Then, we discuss the function of 3DP-ESF in manipulating the different stages of wound healing, including anti-bacteria, anti-inflammation, and promotion of cell migration and proliferation, as well as the construction of tissue-engineered scaffolds. In the end, we provide the current challenge faced by 3DP-ESF in the application of skin wound regeneration and its promising future directions.

Solanum lycopersicum (Tomato)-Derived Nanovesicles Accelerate Wound Healing by Eliciting the Migration of Keratinocytes and Fibroblasts

Plant-derived nanovesicles have been considered interesting in medicine for their breakthrough biological effects, including those relevant to wound healing. However, tomato-derived nanovesicles (TDNVs) have not been studied for their effects on wound closure yet. TDNVs were isolated from Solanum lycopersicum (var. Piccadilly) ripe tomatoes by ultracentrifugation. Extract (collected during the isolation procedure) and NVs (pellet) were characterized by transmission electron microscopy and laser Doppler electrophoresis. Wound healing in the presence of Extract or NVs was analyzed by a scratch assay with monocultures of human keratinocytes (HUKE) or NIH-3T3 mouse fibroblasts. Cell proliferation and migration were studied by MTT and agarose spot assay, respectively. The vesicles in the Extract and NV samples were nanosized with a similar mean diameter of 115 nm and 130 nm, respectively. Both Extract and NVs had already accelerated wound closure of injured HUKE and NIH-3T3 monocultures by 6 h post-injury. Although neither sample exerted a cytotoxic effect on HUKE and NIH-3T3 fibroblasts, they did not augment cell proliferation. NVs and the Extract increased cell migration of both cell types. NVs from tomatoes may accelerate wound healing by increasing keratinocyte and fibroblast migration. These results indicate the potential therapeutic usefulness of TDNVs in the treatment of chronic or hard-to-heal ulcers.

Local Injection of Rapamycin-Loaded Pcl-Peg Nanoparticles for Enhanced Tendon Healing in Rotator Cuff Tears via Simultaneously Reducing Fatty Infiltration and Drug Toxicity

As a common cause of shoulder pain, rotator cuff tears (RCTs) are difficult to treat clinically because of their unsatisfactory prognosis due to the fatty infiltration caused by muscle-derived stem cells (MDSCs). Previous studies have found that rapamycin (RAPA) can inhibit fatty infiltration. However, systemic administration of RAPA may cause complications such as infection and nausea, while local administration of RAPA may lead to the cytotoxicity of tendon cells, affecting the healing of rotator cuffs. In this study, biocompatible and clinically approved polycaprolactone-polyethylene glycol (PCL-PEG) is formulated into an injectable nanoparticle for the sustained release of RAPA. The results indicate that the RAPA/PCL-PEG nanoparticles (NPs) can efficiently prolong the release of RAPA and significantly reduce the cytotoxicity of tendon cells caused by RAPA. The study of the fatty infiltration model in rats with delayed rotator cuff repair shows that weekly intraarticular injection of RAPA/PCL-PEG NPs can more effectively reduce the fatty infiltration and muscle atrophy of rat rotator cuffs and leads to better mechanical properties and gait improvements than a daily intraarticular injection of RAPA. These findings imply that local injection of RAPA/PCL-PEG NPs in the shoulder joints can be a potential clinical option for RCTs patients with fatty infiltration.

Facile preparation of self-healing hydrogels based on chitosan and PVA with the incorporation of curcumin-loaded micelles for wound dressings

The increased demand for improved strategies for wound healing has, in recent years, motivated the development of multifunctional hydrogels with favorable bio-compatibility and antibacterial properties. To this regard, the current study presented the design of a novel self-healing composite hydrogel that could perform as wound dressing for the promotion of wound healing. The composite hydrogels were composed of polyvinyl alcohol (PVA), borax and chitosan functionalized with sialic acid (SA-CS) and curcumin loaded pluronic F127 micelles. The hydrogels were formed through the boronic ester bond formation between PVA, SA-CS and borax under physiological conditions and demonstrated adjustable mechanical properties, gelation kinetics and antibacterial properties. When incubating with NIH3T3 cells, the hydrogels also demonstrated good biocompatibility. These aspects offer a promising foundation for their prospective applications in developing clinical materials for wound healing.

Metallic elements combine with herbal compounds upload in microneedles to promote wound healing: a review

Wound healing is a dynamic and complex restorative process, and traditional dressings reduce their therapeutic effectiveness due to the accumulation of drugs in the cuticle. As a novel drug delivery system, microneedles (MNs) can overcome the defect and deliver drugs to the deeper layers of the skin. As the core of the microneedle system, loaded drugs exert a significant influence on the therapeutic efficacy of MNs. Metallic elements and herbal compounds have been widely used in wound treatment for their ability to accelerate the healing process. Metallic elements primarily serve as antimicrobial agents and facilitate the enhancement of cell proliferation. Whereas various herbal compounds act on different targets in the inflammatory, proliferative, and remodeling phases of wound healing. The interaction between the two drugs forms nanoparticles (NPs) and metal-organic frameworks (MOFs), reducing the toxicity of the metallic elements and increasing the therapeutic effect. This article summarizes recent trends in the development of MNs made of metallic elements and herbal compounds for wound healing, describes their advantages in wound treatment, and provides a reference for the development of future MNs.

Co-assembled Supramolecular Hydrogel of Salvianolic Acid B and a Phosphopeptide for Enhanced Wound Healing

Supramolecular natural product gels (NPGs) have emerged as promising biomaterials for scalable and adjustable drug delivery systems. These gels possess biocompatibility, biodegradability, and the ability to mimic the extracellular matrix. Salvianolic acid B (SAB), derived from Salvia miltiorrhiza, a Chinese medicinal plant, exhibits various beneficial properties such as antioxidant, antifibrotic, and angiogenic effects. In our research, we serendipitously discovered that the co-assembly of SAB and a soluble phosphopeptide results in the formation of a robust and adhesive hydrogel termed 1&SAB hydrogel. This hydrogel effectively prolongs the retention time of the therapeutic agents on the skin's wound surface, thereby promoting wound healing. The hydrogel demonstrates antioxidant effects, enhances cell migration, accelerates angiogenesis, and inhibits scar hyperplasia. This innovative gel material offers a simple and efficient approach to managing skin wounds and holds promise for application in complex wound-healing treatments.

Fucoidan-functionalized gelatin methacryloyl microspheres ameliorate intervertebral disc degeneration by restoring redox and matrix homeostasis of nucleus pulposus

Loss of extracellular matrix (ECM) and dehydration of the nucleus pulposus (NP) are major pathological characteristics of intervertebral disc degeneration (IVDD), the leading cause of low back pain. Excessive reactive oxygen species (ROS) induced by proinflammatory cytokines substantially contribute to IVDD pathogenesis. This study aimed to examine the potential of fucoidan in protecting the matrix metabolism of NP cells and its therapeutic efficacy in the prevention of IVDD. In an inflammatory environment induced by interleukin (IL)-1β, fucoidan treatments demonstrated a dose-dependent enhancement of ECM production in NP cells, while concurrently reducing the expression of matrix degradation enzymes. The protective effect of fucoidan was mediated through the activation of nuclear factor erythroid 2-related factor 2 (NRF2) and subsequent induction of antioxidant enzymes, whereas silencing Nrf2 abrogated the protection of fucoidan on NP cells against IL-1β-induced oxidative stress. Moreover, a novel fucoidan-functionalized gelatin methacryloyl microsphere (Fu@GelMA-MS) was synthesized. The in vivo application of Fu@GelMA-MS via in situ injection in a rat caudal IVD model effectively conserved the ECM components and maintained the hydration of the NP tissue, thereby preventing IVDD caused by puncture. Collectively, fucoidan-functionalized hydrogel microspheres represent a promising strategy for the regeneration of NP and the treatment of IVDD.

Preparation of metal-organic framework combined with Portulaca oleracea L. extract electrostatically spun nanofiber membranes delayed release wound dressing

In this study, we prepared a polyacrylonitrile (PAN) composite nanofiber membrane comprising Portulaca oleracea L. extract (POE) and a zinc-based metal-organic framework (MOF) by an in situ growth method as a potentially new type of wound dressing with a slow drug-release effect, to solve the problem of the burst release of drugs in wound dressings. The effects of the MOF and POE doping on the nanofiber membranes were examined using scanning electron microscopy (SEM) and FTIR spectroscopy. SEM analysis revealed the dense and uniform attachment of MOF particles to the surface of the nanofiber membrane, while FTIR spectroscopy confirmed the successful fusion of MOF and POE. Furthermore, investigations into the water contact angle and swelling property demonstrated that the incorporation of the MOF and POE enhanced the hydrophilicity of the material. The results of the in vitro release test showed that the cumulative release rate for PAN/MOF/POE60 decreased from 66.5 ± 2.34% to 32.18 ± 1.31% in the initial 4 h and from 90.54 ± 0.79% to 65.92 ± 1.95% in 72 h compared to PAN/POE, indicating a slowing down of the drug release. In addition, the antimicrobial properties of the fiber membranes were evaluated by the disc diffusion method, and it was evident that the PAN/MOF/POE nanofibers exhibited strong inhibition against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The antioxidant properties of the nanofiber membranes loaded with POE were further validated through the DPPH radical scavenging test. These findings highlight the potential application of the developed nanofiber membranes in wound dressings, offering controlled and sustained drug-release capabilities.