Facile preparation of cellulose nanocrystals/ZnO hybrids using acidified ZnCl(2) as cellulose hydrolytic media and ZnO precursor

Growth of ZnO nanorods/flowers on the carbon fiber surfaces using sodium alginate as medium to enhance the mechanical properties of composites

The chemical inertness of the carbon fiber (CF) surface results in suboptimal mechanical properties of the prepared composites. To address this issue, we employed a combination of tannic acid and 3-aminopropyltriethoxysilane mixture (TA-APTES) grafted sodium alginate (SA) as a medium to enhance the interfacial properties of composites through the growth of ZnO nanoparticles on CF surfaces. ZnO nanolayers with rod-like and flower-like structures were obtained by adjusting the pH of the reaction system (pH = 10 and 12, respectively). Characterization results show that in comparison with the untreated CF composites, in the flexural strength, flexural modulus, interlaminar shear strength (ILSS) and interfacial shear strength (IFSS) of the as-prepared CF/TA-APTES/SA/ZnO10 (nanorods) composites were improved by 40.8 %, 58.4 %, 44.9 % and 47.8 %, respectively. The prepared CF/TA-APTES/SA/ZnO12 (nanoflowers) composite showed an increase in flexural strength, flexural modulus, ILSS and IFSS by 39.8 %, 63.6 %, 47.3 % and 48.2 %, respectively. These positive results indicate that the ZnO nanolayers increase the interfacial phase area and fiber surface roughness, thereby enhancing mechanical interlocking and load transfer between the fibers and resin matrix. This work provides a novel interfacial modification method for preparing CF composites used in longer and more durable wind turbine blades.

Robust and versatile superhydrophobic cellulose-based composite film with superior UV shielding and heat-barrier performances for sustainable packaging

Replacing single-use plastic delivery bags (SPDBs) with cellulose-based materials is an effective strategy to reduce environmental pollution. However, the inherent hydrophilicity and ultralow mechanical strength of cellulose materials limit its development. In this study, zinc oxide (ZnO)-cellulose composite films were successfully prepared through "two-step strategy" of lotus leaves structure simulation, including deposition of micro-nano ZnO particles and stearic acid (STA) modification. Well-dispersed micro-nano ZnO particles with stick-like structure were anchored in the ZnO-cellulose composite film prepared at 90 °C (CF-90). Due to the special structural design and strong interaction between the cellulose and micro-nano ZnO particles, the CF-90 showed higher mechanical property (a 47.8 % improvement in the tensile strength). Impressively, CF-90 also exhibited great UV shielding properties with larger UPF value of 1603.98 and superhigh heat-barrier performance. Moreover, CF-90 obtained excellent superhydrophobicity with a water contact angle of 163.6° by further modification. Consequently, the versatile cellulose-based material bringing a dawn on application of sustainable packaging materials for express delivery industry.

Cellulose nanocrystalline from biomass wastes: An overview of extraction, functionalization and applications in drug delivery

Cellulose nanocrystals (CNC) have been extensively used in various fields due to their renewability, excellent biocompatibility, large specific surface area, and high tensile strength. Most biomass wastes contain significant amounts of cellulose, which forms the basis of CNC. Biomass wastes are generally made up of agricultural waste, and forest residues, etc. CNC can be produced from biomass wastes by removing the non-cellulosic components through acid hydrolysis, enzymatic hydrolysis, oxidation hydrolysis, and other mechanical methods. However, biomass wastes are generally disposed of or burned in a random manner, resulting in adverse environmental consequences. Hence, using biomass wastes to develop CNC-based carrier materials is an effective strategy to promote the high value-added application of biomass wastes. This review summarizes the advantages of CNC applications, the extraction process, and recent advances in CNC-based composites, such as aerogels, hydrogels, films, and metal complexes. Furthermore, the drug release characteristics of CNC-based material are discussed in detail. Additionally, we discuss some gaps in our understanding of the current state of knowledge and potential future directions of CNC-based materials.