Rheological performance of film-forming solutions and barrier properties of films fabricated from cold plasma-treated high methoxyl apple pectin and crosslinked by Ca2+: Impact of plasma treatment voltage

Composite hydrogels fabricated from konjac glucomannan and gellan gum: Rheological characterization and their potential application in sustainable agriculture

In this study, konjac glucomannan (KG) was incorporated in high acyl gellan (HAG) and low acyl gellan (LAG) hydrogels in different ratios. The addition of KG increased pseudoplasticity and thermal hysteresis values of the hydrogels. Improvement in elasticity and water holding capacity (WHC) was observed in KG-LAG hydrogels. The highest WHC (98.5 %) was observed for 1K1H (KG:HAG = 1:1) and 3K7L (KG:LAG = 3:7) hydrogels. The crystallinity of the composite hydrogels was lower than hydrogels prepared from individual biopolymers. The hydrogels exhibited a rough surface with minute pores in the cross-section, due to the aggregation of glucomannan on the gellan network in the composite hydrogels. While HAG and 1K1H hydrogels exhibited greater swelling at low pH (3.0), LAG and 3K7L exhibited greater swelling at high pH (11.0). At pH 7.0, the hydrogels exhibited swelling indices >300 %. Incorporation of 1K1H hydrogel at 10 % (w/w) in sandy loamy soil under semi-arid conditions increased the germination of fenugreek microgreens from 60 % to 80 % on the 15th day. Furthermore, the moisture evaporation rate of the soil reduced from 35 % to <15 %, positively impacting the physicochemical properties of the microgreens. The composite hydrogels were successful in achieving a controlled release of phosphate fertilizer.

Novel films of pectin extracted from ambarella fruit peel and jackfruit seed slimy sheath: Effect of ionic crosslinking on the properties of pectin film

Here, we prepared ionically crosslinked films using pectin extracted from agro-wastes, specifically ambarella peels (AFP) and jackfruit seed slimy sheath (JFS). Physiochemical properties of pectins, including moisture content, molecular weight (Mw), degree of esterification (DE), and galacturonic acid (GA), were analyzed. Optimal extraction was determined, i.e., citric acid concentration 0.3 M, time 60 min, solid/liquid ratio 1:25, and temperature 90 °C for AFP or 85 °C for JFS. Pectin yields under these conditions were 29.67 % ± 0.35 % and 29.93 ± 0.49 %, respectively. AFP pectin revealed Mw, DE, and GA values of 533.20 kDa, 67.08 % ± 0.68 %, and 75.39 ± 0.82 %, while JFS pectin exhibited values of 859.94 kDa, 63.04 % ± 0.47 %, and 78.63 % ± 0.71 %, respectively. The pectin films crosslinked with Ca2+, Cu2+, Fe3+, or Zn2+ exhibited enhanced tensile strength and Young's modulus, along with reduced elongation at break, moisture content, water solubility, water vapor permeability, and oxygen permeability. Structural analyses indicated metal ions were effectively crosslinked with carboxyl groups of pectin. Notably, the Cu2+-crosslinked film demonstrated superior water resistance, mechanical properties, and exhibited the highest antioxidant and antibacterial activities among all tested films. Therefore, the pectin films represent a promising avenue to produce eco-friendly food packaging materials with excellent properties.

Towards scalable and degradable bioplastic films from Moringa oleifera gum/poly(vinyl alcohol) as packaging material

The use of plant gum-based biodegradable bioplastic films as a packaging material is limited due to their poor physicochemical properties. However, combining plant gum with synthetic degradable polymer and some additives can improve these properties. Keeping in view, the present study aimed to synthesize a series of bioplastic films using Moringa oleifera gum, polyvinyl alcohol, glycerol, and citric acid via thermal treatment followed by a solution casting method. The films were characterized using analytical techniques such as FTIR, XRD, SEM, AFM, TGA, and DSC. The study examined properties such as water sensitivity, gas barrier attributes, tensile strength, the shelf life of food, and biodegradability. The films containing higher citric acid amounts showed appreciable %elongation without compromising tensile strength, good oxygen barrier properties, and biodegradation rates (>95%). Varying the amounts of glycerol and citric acid in the films broadened their physicochemical properties ranging from hydrophilicity to hydrophobicity and rigidity to flexibility. As all the films were synthesized using economical and environmentally safe materials, and showed better physicochemical and barrier properties, this study suggests that these bioplastic films can prove to be a potential alternative for various packaging applications.

Modulation of the properties of starch gels by a one-step extrusion modification method based on Ca2+-citric acid synergistic crosslinking

Citric acid (CA) is a green and safe food-grade crosslinking agent for starch, but its high crosslinking temperature limits its application. In this study, a "one-step" extrusion modification method based on Ca2+-esterification synergistic crosslinking was proposed for the preparation of high gel performance crosslinked starch at low temperatures (90 °C). The linear and nonlinear rheological properties of crosslinked starch were comprehensively characterized, and the enhancement effect of synergistic crosslinking reactions on starch gel properties was quantitatively studied. The results show that the elastic modulus of the synergistically crosslinked starch (SC-0.5Ca2+, G' = 3116 ± 36) was significantly increased by 879 % compared to the elastic modulus of starch without synergistically crosslinked modification (SC, G' = 318 ± 9). The elastic modulus of starch gels can be adjusted by changing the ion concentration. Nonlinear rheological Lissajous curve analysis results show that the synergistic crosslinked gel system has a stronger anti-deformation ability. In addition, the honeycomb porous structure and smaller pore size distribution of the synergistic crosslinked gels were characterized using scanning SEM. The XPS, FTIR and XRD results suggest that the synergistic crosslinking enhancement effect may involve various molecular forces such as electrostatic attraction, hydrogen bonding and ester bonding.

Fluorescence and pectinase double-triggered chitosan/pectin/calcium propionate/curcumin-β-cyclodextrin complex film for pork freshness monitoring and maintenance

An intelligent and active food packaging film based on chitosan (CS), pectin (P), calcium propionate (CP), and curcumin-β-cyclodextrin complex (Cur-β-CD) was prepared. The CS/P/CP/Cur-β-CD film exhibited improved hydrophobicity (74.78 ± 0.53°), water vapor (4.55 ± 0.16 × 10-11 g·(m·s·Pa)-1), and oxygen (1.50 ± 0.06 × 10-12 g·(m·s·Pa)-1) barrier properties, as well as antioxidant (72.34 ± 3.79 % for DPPH and 86.05 ± 0.14 % for ABTS) and antibacterial (79.41 ± 2.89 % for E. coli and 83.82 ± 3.96 % for S. aureus) activities. The release of CP and Cur could be triggered by pectinase, with their cumulative release reaching 92.62 ± 1.20 % and 42.24 ± 1.15 %, respectively. The CS/P/CP/Cur-β-CD film showed delayed alterations in surface color, pH value, total volatile bases nitrogen, total viable counts, thiobarbituric acid reactive substance, hardness, and springiness of pork. Additionally, the fluorescence intensity of the film gradually decreased. In conclusion, we have developed a pH-responsive film with pectinase-triggered release function, providing a new concept for the design of multi-signal responsive intelligent food packaging.

Inclusion of konjac glucomannan in pea protein hydrogels improved the rheological and in vitro release properties of the composite hydrogels

In this study, a composite hydrogel consisting of pea protein and konjac glucomannan (KG) was fabricated using three approaches, namely neutral, salt-set, and alkaline gelation. Hydrogels made from pea protein were brittle and weak. The addition of KG improved the elasticity and water holding capacity of the pea protein hydrogels. Concomitantly, a decrease in syneresis rate and swelling of the composite hydrogels was observed. The alkaline-set hydrogels exhibited the highest resilience to strain. Thixotropicity was found to be less pronounced for salt-set hydrogels. Sulphate had a greater positive effect on the structural recovery and negative effect on hysteresis area than chloride due to the greater salting-out effect of the sulphates. The addition of KG facilitated the formation of an interconnected structure with limited mobility of biopolymer chains. A sharp increase in G' and G" during the temperature ramp indicated the predominance of hydrophobic interactions towards the aggregation of biopolymers. The infrared spectra of the hydrogels revealed a change in secondary structure of proteins on addition of KG. A controlled in vitro release of riboflavin was observed in neutral and salt-set hydrogels. The alkaline-set hydrogels exhibited a prolonged gastric retention time, thereby establishing in vitro antacid activity in the gastric environment.

Ambient plasma treatment of pectin in aqueous solution to produce a polymer used in packaging

Water resistance, mechanical behavior and coloration of pectin needs to be tuned for packing utilization. Plasma was used for the treatment of natural products, but there is no research on its effect on the biomass in the presence of ammonia. Though the reaction of pectin (PE) and ammonia was known to impart the ammonolysis and de-esterification, the plasma treatment on PE solution containing ammonia was explored to exemplify the amination and polymerization of the carbohydrate at the ambient condition. The plasma treatment increased the coloration of the solution due to the deprotonation of PE for the production of more sp2 carbon. The film from the amination of PE showed higher hydrophobicity and water stability than the bare PE. The plasma treatment alone decreased the Young's modulus (4.3 MPa versus 22 MPa), while the nitrogen addition enhanced the Young's modulus to 160 MPa and increased the tensile strength (28.7 MPa versus 25.8 MPa of PE). The hydrogen bonds from the amine group induced a glass-to-rubber transition at 77.9 °C by the increasing the crosslinking. This work provided a facile way of aminating and conjugating the biomass in solution to produce polymer with improved mechanical properties using plasma and ammonia incorporation.