Unsung versatility of elastin-like polypeptide inspired spheroid fabrication: A review

Genetically Programmed Temperature-Responsive Barnacle-Derived Protein with an Enhanced Adhesion Ability

There is an emerging strong demand for smart environmentally responsive protein-based biomaterials with improved adhesion properties, especially underwater adhesion for potential environmental and medical applications. Based on the fusion of elastin-like polypeptides (ELPs), SpyCatcher and SpyTag modules, biosynthetic barnacle-derived protein was genetically engineered and self-assembled with an enhanced adhesion ability and temperature response. The water resistance ability of the synthetic protein biopolymer with a network structure increased to 98.8 from 58.5% of the original Cp19k, and the nonaqueous adhesion strength enhanced to 1.26 from 0.68 MPa of Cp19k. The biopolymer showed an improved adhesion ability toward hydrophilic and hydrophobic surfaces as well as diatomite powders. The combination of functional module ELPs and SpyTag/SpyCatcher could endow the biosynthetic protein with temperature response, an insoluble form above 42 °C and a soluble form at 4 °C. The combinational advantages including temperature response and adhesion performance make the self-assembled protein an excellent candidate in surgical adhesion, underwater repair, and surface modification of various coatings. Distinct from the traditional approach of utilizing solely ELPs, the integration of short ELPs with Spy partners exhibited a synergistic enhancement in the temperature response. The synergistic effects of two functional modules provide a technical method and insight for designing smart self-assembled protein-based biopolymers.

Insights into spheroids formation in cellulose nanofibrils and Matrigel hydrogels using AFM-based techniques

The recent FDA decision to eliminate animal testing requirements emphasises the role of cell models, such as spheroids, as regulatory test alternatives for investigations of cellular behaviour, drug responses, and disease modelling. The influence of environment on spheroid formation are incompletely understood, leading to uncertainty in matrix selection for scaffold-based 3D culture. This study uses atomic force microscopy-based techniques to quantify cell adhesion to Matrigel and cellulose nanofibrils (CNF), and cell-cell adhesion forces, and their role in spheroid formation of hepatocellular carcinoma (HepG2) and induced pluripotent stem cells (iPS(IMR90)-4). Results showed different cell behaviour in CNF and Matrigel cultures. Both cell lines formed compact spheroids in CNF but loose cell aggregates in Matrigel. Interestingly, the type of cell adhesion protein, and not the bond strength, appeared to be a key factor in the formation of compact spheroids. The gene expression of E- and N-cadherins, proteins on cell membrane responsible for cell-cell interactions, was increased in CNF culture, leading to formation of compact spheroids while Matrigel culture induced integrin-laminin binding and downregulated E-cadherin expression, resulting in looser cell aggregates. These findings enhance our understanding of cell-biomaterial interactions in 3D cultures and offer insights for improved 3D cell models, culture biomaterials, and applications in drug research.

Structural and physical basis for the elasticity of elastin

Elastin function is to endow vertebrate tissues with elasticity so that they can adapt to local mechanical constraints. The hydrophobicity and insolubility of the mature elastin polymer have hampered studies of its molecular organisation and structure-elasticity relationships. Nevertheless, a growing number of studies from a broad range of disciplines have provided invaluable insights, and several structural models of elastin have been proposed. However, many questions remain regarding how the primary sequence of elastin (and the soluble precursor tropoelastin) governs the molecular structure, its organisation into a polymeric network, and the mechanical properties of the resulting material. The elasticity of elastin is known to be largely entropic in origin, a property that is understood to arise from both its disordered molecular structure and its hydrophobic character. Despite a high degree of hydrophobicity, elastin does not form compact, water-excluding domains and remains highly disordered. However, elastin contains both stable and labile secondary structure elements. Current models of elastin structure and function are drawn from data collected on tropoelastin and on elastin-like peptides (ELPs) but at the tissue level, elasticity is only achieved after polymerisation of the mature elastin. In tissues, the reticulation of tropoelastin chains in water defines the polymer elastin that bears elasticity. Similarly, ELPs require polymerisation to become elastic. There is considerable interest in elastin especially in the biomaterials and cosmetic fields where ELPs are widely used. This review aims to provide an up-to-date survey of/perspective on current knowledge about the interplay between elastin structure, solvation, and entropic elasticity.

Exploring the interaction between extracellular matrix components in a 3D organoid disease model to replicate the pathophysiology of breast cancer

In vitro models are necessary to study the pathophysiology of the disease and the development of effective, tailored treatment methods owing to the complexity and heterogeneity of breast cancer and the large population affected by it. The cellular connections and tumor microenvironments observed in vivo are often not recapitulated in conventional two-dimensional (2D) cell cultures. Therefore, developing 3D in vitro models that mimic the complex architecture and physiological circumstances of breast tumors is crucial for advancing our understanding of the illness. A 3D scaffold-free in vitro disease model mimics breast cancer pathophysiology by allowing cells to self-assemble/pattern into 3D structures, in contrast with other 3D models that rely on artificial scaffolds. It is possible that this model, whether applied to breast tumors using patient-derived primary cells (fibroblasts, endothelial cells, and cancer cells), can accurately replicate the observed heterogeneity. The complicated interactions between different cell types are modelled by integrating critical components of the tumor microenvironment, such as the extracellular matrix, vascular endothelial cells, and tumor growth factors. Tissue interactions, immune cell infiltration, and the effects of the milieu on drug resistance can be studied using this scaffold-free 3D model. The scaffold-free 3D in vitro disease model for mimicking tumor pathophysiology in breast cancer is a useful tool for studying the molecular basis of the disease, identifying new therapeutic targets, and evaluating treatment modalities. It provides a more physiologically appropriate high-throughput platform for screening large compound library in a 96-384 well format. We critically discussed the rapid development of personalized treatment strategies and accelerated drug screening platforms to close the gap between traditional 2D cell culture and in vivo investigations.

Bioinspired Polymers: Transformative Applications in Biomedicine and Regenerative Medicine

Bioinspired polymers have emerged as a promising field in biomaterials research, offering innovative solutions for various applications in biomedical engineering. This manuscript provides an overview of the advancements and potential of bioinspired polymers in tissue engineering, regenerative medicine, and biomedicine. The manuscript discusses their role in enhancing mechanical properties, mimicking the extracellular matrix, incorporating hydrophobic particles for self-healing abilities, and improving stability. Additionally, it explores their applications in antibacterial properties, optical and sensing applications, cancer therapy, and wound healing. The manuscript emphasizes the significance of bioinspired polymers in expanding biomedical applications, addressing healthcare challenges, and improving outcomes. By highlighting these achievements, this manuscript highlights the transformative impact of bioinspired polymers in biomedical engineering and sets the stage for further research and development in the field.

Three-dimensional culture conditioned bone marrow MSC secretome accelerates wound healing in a burn injury mouse model

Mesenchymal stem cell (MSC)-based therapy has emerged as a promising regenerative therapeutic approach for wound healing. To determine the effects of cultured MSCs as a 2D monolayer (2D-MSCs) and 3D spheroids (3D-MSCs) on their secretomes, and to examine the effect of 3D-MSC secretomes on endothelial cells (ECs) and MSCs in a burn injury mouse model. MSCs were cultured as 2D monolayers (2D-MSCs) and 3D spheroids (3D-MSCs) and their cellular characteristics were evaluated by western blotting. 2D-MSC and 3D-MSC secretomes (condition medium: CM) were analyzed using an angiogenic array. The activation of ECs by 2D-MSC and 3D-MSC CMs was examined in cellular proliferation, migration, and tube formation assays. The wound healing effects of 2D-MSCs and 3D-MSCs were determined in vivo using a burn injury mouse model. 3D culture conditions altered the markers of components that regulate cell survival, cytoskeletal, adhesion, and proliferation. Interleukin-6 (IL-6), vascular endothelial growth factor A (VEGFA), IL-8, and chemokine (CXC motif) ligand 1 (CXCL1) were present at high levels in the CM of 3D-MSCs compared with 2D-MCs. 3D-MSC-CMs promoted the proliferation, migration, and tube formation of ECs. Furthermore, 3D-MSC treatment enhanced wound healing in a burn injury mouse model. 3D culture improves proangiogenic factors in the MSC secretome and 3D-MSCs represent a new cell-based treatment strategy for wound healing.