Self-healing waterborne polyurethane coatings with high transparence and haze via cellulose nanocrystal stabilized linseed oil Pickering emulsion

Preparation of nanocellulose and application of nanocellulose polyurethane composites

Polyurethane is a widely used material because of its excellent properties. Cellulose is a renewable, biocompatible, and biodegradable natural polymer that also has the advantages of a low density, high porosity, and large specific surface area. There are three main types of common nanocellulose: nanocellulose fibers, cellulose nanocrystals, and bacterial nanocellulose. Composites prepared with nanocellulose and polyurethane materials have good mechanical properties and good biocompatibility and can be applied in sensors, 3D printing, self-repairing materials, electromagnetic shielding, and many other areas. This paper details the preparation processes of different nanocelluloses and the application areas of composites, and points to the future development of nanocellulose polyurethane composites.

Tung oil-based waterborne UV-curable coatings via cellulose nanofibril stabilized Pickering emulsions for self-healing and anticorrosion application

In this study, waterborne UV-curable coatings with self-healing properties based on transesterification were prepared using renewable biomass resources for anti-corrosion application. Tung oil (TO)-based oligomer (TMHT) was synthesized through Diels-Alder reaction of TO with maleic anhydride, subsequent ring opening reaction with hydroxyethyl acrylate (HEA), and final neutralize reaction with triethylamine. A series of waterborne UV-curable coatings were prepared from cellulose nanofibrils (CNF) stabilized TMHT-based Pickering emulsions after drying and UV light-curing processes. It is suggested that CNF significantly improved the storage stability of Pickering emulsions. The obtained waterborne UV-curable coatings with CNF of 1-3 wt% exhibited remarking coating and mechanical performance (pencil hardness up to 5 H, adhesion up to 2 grade, flexibility of 2 mm, tensile strength up to 11.6 MPa, etc.), great transmittance (82.3 %-80.8 %) and great corrosion resistance (|Z|0.01Hz up to 5.4 × 106 Ω·cm2). Because of the presence of the dynamic ester bonds in TMHT, the coatings exhibited excellent self-healing performance (78.05 %-56.34 %) at 150 °C without catalyst and external force. More importantly, the |Z|0.01Hz of the self-healing coating was higher than that of the scratched coating, indicating that the self-healing performance could extend the service life of the coating in corrosion resistant application.

Antibacterial polylactic acid fabricated via Pickering emulsion approach with polyethyleneimine and polydopamine modified cellulose nanocrystals as emulsion stabilizers

Antibacterial biodegradable plastics are highly demanded for food package and disposable medical plastic consumables. Incorporating antibacterial nanoagents into polymer matrices is an effective method to endow polymers with antibacterial activity. However, synthesis of sustainable antibacterial nanoagents with high antibacterial activity via facile approach and well dispersion of them in polymer matrices are still challenging. In this study, polyethyleneimine (PEI) was grafted on surface of cellulose nanocrystals (CNCs) via the oxidation self-polymerization of dopamine (DA) and the Michael addition/Schiff base reaction between DA and PEI. The resulted PEI and polydopamine modified CNCs (PPCs) showed substantially enhanced antibacterial activity and reduced cytotoxicity for NIH3T3 than PEI due to increased local concentration and anchoring of PEI. The minimum concentration of PPCs to achieve antibacterial rate of 99.99 % against S. aureus and E. coli were about 50 and 20 μg/mL, respectively. PPCs displayed outstanding emulsifying ability, and PPC coated polylactic acid (PLA) microspheres were obtained by drying PPC stabilized PLA Pickering emulsion, leading to a well dispersion of PPCs in PLA. PPC/PLA film prepared by hot-pressing displayed great antibacterial performance and enhanced mechanical properties. Therefore, this study proposed a facile approach to fabricate biocompatible antibacterial nanoagents and plastics.

Dual-Shell Microcapsules for High-Response Efficiency Self-Healing of Multi-Scale Damage in Waterborne Polymer-Cement Coatings

Waterborne polymer-cement coatings have been widely applied in building materials due to their organic solvent-free nature, low cost, and eco-friendliness. However, these coatings can easily crack during the drying process as a result of construction environment factors, compromising the barrier performance of the coating and limiting its large-scale application. In this study, a dual-shell self-healing microcapsule was developed, which can effectively heal damage on a macro scale in waterborne polymer-cement coatings. Specifically, this dual-shell self-healing microcapsule was designed with a silica gel shell and a tannic acid-cuprum (TA-Cu) double-shell structure embedded with an epoxy resin (EP) healing agent, which was successfully fabricated via a two-step in situ polymerization. This silica gel shell self-healing microcapsules can effectively load into waterborne polymer-cement coatings. As the coating dries and solidifies, the silica gel shell of the microcapsule also becomes loose and brittle due to dehydration. This improves the mechanical initiation efficiency of the microcapsules in the coating. This study provides a novel approach for the application of self-healing microcapsules in waterborne coating systems, which can significantly reduce cracking during the drying process of waterborne polymer-cement coatings and improve the service life of the coating under complex conditions.

Recent Advances in Tailored Fabrication and Properties of Biobased Self-Healing Polyurethane

With the emergence of challenges in the environmental degradation and resource scarcity fields, the research of biobased self-healing polyurethane (BSPU) has become a prevailing trend in the technology of the polyurethane industry and a promising direction for developing biomass resources. Here, the production of BSPU from lignocellulose, vegetable oil, chitosan, collagen, and coumarin is classified, and the principles of designing polyurethane based on compelling examples using the latest methods and current research are summarized. Moreover, the impact of biomass materials on self-healing and mechanical properties, as well as the tailored performance method, are presented in detail. Finally, the applications of BSPU in biomedicine, sensors, coatings, etc. are also summarized, and the possible challenges and development prospects are explored to helpfully make progress in the development of BSPU. These findings demonstrate valuable references and practical significance for future BSPU research.

Molecular Advances to Combat Different Biotic and Abiotic Stresses in Linseed (Linum usitatissimum L.): A Comprehensive Review

Flax, or linseed, is considered a "superfood", which means that it is a food with diverse health benefits and potentially useful bioactive ingredients. It is a multi-purpose crop that is prized for its seed oil, fibre, nutraceutical, and probiotic qualities. It is suited to various habitats and agro-ecological conditions. Numerous abiotic and biotic stressors that can either have a direct or indirect impact on plant health are experienced by flax plants as a result of changing environmental circumstances. Research on the impact of various stresses and their possible ameliorators is prompted by such expectations. By inducing the loss of specific alleles and using a limited number of selected varieties, modern breeding techniques have decreased the overall genetic variability required for climate-smart agriculture. However, gene banks have well-managed collectionns of landraces, wild linseed accessions, and auxiliary Linum species that serve as an important source of novel alleles. In the past, flax-breeding techniques were prioritised, preserving high yield with other essential traits. Applications of molecular markers in modern breeding have made it easy to identify quantitative trait loci (QTLs) for various agronomic characteristics. The genetic diversity of linseed species and the evaluation of their tolerance to abiotic stresses, including drought, salinity, heavy metal tolerance, and temperature, as well as resistance to biotic stress factors, viz., rust, wilt, powdery mildew, and alternaria blight, despite addressing various morphotypes and the value of linseed as a supplement, are the primary topics of this review.