Efficient adsorption of Congo red by micro/nano MIL-88A (Fe, Al, Fe-Al)/chitosan composite sponge: Preparation, characterization, and adsorption mechanism

Double cross-linked chitosan sponge encapsulated with ZrO2/soy protein isolate amyloid fibrils nanoparticles for the fluoride ion removal from water

Fluoride ion pollution in water has become a serious threat to the water environment and human health. Adsorption is a promising means of fluoride removal, but it also faces challenges such as the difficult separation and recovery of powdered particles, the leaching of modified coatings from adsorbents, and the structural disintegration of macroscopic adsorbents. For addressing the above challenges, glutaraldehyde/polyvinyl alcohol co-crosslinked ZrSAF/chitosan spongy composites (ZrS/GPCS) were prepared by utilizing encapsulation strategies and cross-linking. ZrS/GPCS-1, ZrS/GPCS-3 and ZrS/GPCS-4 were prepared due to the different amounts of cross-linking agents. The results showed that their fluoride ion adsorption capacities were 42.02, 44.44 and 39.84 mg/g, respectively. The removal of fluoride ions by ZrS/GPCS was maintained at >80 % in the pH range of 4-10. The addition of glutaraldehyde and polyvinyl alcohol affected the contact efficiency of fluoride ions with chitosan and ZrSAF, influencing the adsorption rate and adsorption effect. Glutaraldehyde, polyvinyl alcohol and ZrSAF improved the thermal stability, mechanical properties and structural integrity of chitosan matrix. Both the chitosan matrix and the internal ZrSAF played an important role in fluoride removal, and the removal mechanisms included electrostatic interaction, hydrogen bonding, and complexation.

Enhanced Cr(VI) removal via CPBr-modified MIL-88A@amine-functionalized GO: synthesis, performance, and mechanism

Water contamination by heavy metals, especially chromium (VI), poses a critical environmental issue due to its carcinogenic nature and persistence in the environment. Addressing this, the current study develops an efficient adsorbent, CPBr-MIL-88A@AmGO, which utilizes the synergistic capabilities of Cetylpyridinium bromide-modified MIL-88A and amine-functionalized graphene oxide to enhance Cr(VI) removal from aqueous solutions. The obtained results indicate that CPBr-MIL-88A@AmGO achieves its highest removal efficacy at pH 2, where the interaction of CPBr and AmGO's positively charged centers significantly contributes to the adsorption processes. According to the Langmuir isotherm model, the composite's adsorption capacity reached a maximum of 306.75 mg/g. The adsorption kinetics adhered to a pseudo-second-order model along with the endothermic nature of the process. Although the presence of SO42- ions significantly reduces adsorption capacity, other interfering ions including Na+, K+, Ca2+, Cl-, and NO3- only slightly affect it. Remarkably, the composite maintains high removal efficiency, over 82%, even after 7 recycling tests, underscoring its potential for practical applications in water treatment systems. The proposed mechanism involves the contribution of electrostatic attractions, ion exchange, complexation, and the reduction of Cr(VI) to Cr(III) in the removal process. This study not only offers a potent solution for Cr(VI) remediation but also contributes to sustainable water resource management.

Enhanced fluoride removal using montmorillonite clay modified with CoFe2O4 and metal-organic frameworks

The use of modified clays can play an effective role as an effective adsorbent in removing fluoride (Flu) ions from water and aqueous solutions. In the present research, montmorillonite clay (MMt) was modified using CoFe2O4 magnetic particles and Al-Fe fumarate metal-organic framework (Al-Fe Fum) and was utilized as an efficient adsorbent for removing Flu from aqueous solution. The properties of MMt and MMt/CoFe2O4/Al-Fe Fum samples were investigated using different techniques. The results showed that with the modification of MMt using CoFe2O4 magnetic particles and the metal-organic framework of Al-Fe Fum, the BET surface has increased notably from 13.217 to 365.80 m2/g. To investigate the effect of independent variables and their interaction on the efficiency of the Flu adsorption, response surface method-central compound design (RSM-CCD) was served. Based on the results of ANOVA, the F-value and p-value parameters for the desired model were determined to be 783.09 and < 0.0001, respectively, which confirms the success and high ability of the model. The number of R2, adjusted R2, and Predicted R2 for adsorption of Flu ion was determined to be 0.998, 0.997, and 0.995, respectively, which shows that the proposed regression model can describe the process of adsorption and interaction between variables well. Compared to other kinetic models, the pseudo 2nd order kinetic model has a greater ability to describe the Flu adsorption behavior. The R2 parameter value determined that the Freundlich isotherm model has a suitable ability to investigate the isotherm behavior and confirms the effect of heterogeneous surfaces in the process. Generally, the outcomes signified that the MMt and MMt/CoFe2O4/Al-Fe Fum samples can be reused several times in the process of Flu adsorption, while the efficiency is more than 90%.

The effect of the number of SO3- groups on the adsorption of anionic dyes by the synthesized hydroxyapatite/Mg-Al LDH nanocomposite

In this study, a new nanocomposite of hydroxyapatite (HA)/Mg-Al layered double hydroxide (LDH) was successfully formed via a facile co-precipitation method and applied to adsorb three anionic dyes of alizarin red S (ARS), Congo red (CR), and reactive red 120 (RR120) differing in the number of SO3- groups from aqueous solution. Based on a combination of characterization analysis and adsorption experiments, HA/Mg-Al LDH nanocomposite showed better adsorption performance than HA and Mg-Al LDH. Using XRD and TEM analyses, the crystallinity and the presence of nanoparticles were confirmed. According to the SEM investigation, the Mg-Al LDH layers in the nanocomposite structure were delaminated, while HA nanorods were formed at the surface of Mg-Al LDH nanoparticles. The higher BET surface area of the novel HA/Mg-Al LDH nanocomposite compared to HA and Mg-Al LDH provided its superior adsorption performance. Considering an effective amount of adsorbent dosage, pH 5 was selected as the optimum pH for each of the three dye solutions. According to the results from the study of contact time and initial concentration, the pseudo-second-order kinetic (R2 = 0.9987, 0.9951, and 0.9922) and Langmuir isotherm (R2 = 0.9873, 0.9956, and 0.9727) best fitted the data for ARS, CR, and RR120, respectively. Anionic dyes with different numbers of SO3- groups demonstrated distinct adsorption mechanisms for HA and Mg-Al LDH nanoparticles, indicating that the adsorption capacity is influenced by the number of SO3- groups, with HA/Mg-Al LDH nanocomposite offering superior performance toward dyes with higher numbers of SO3- groups. Furthermore, ΔH° less than 40 kJ/mol, positive ΔS°, and negative ΔG° accompanied by the mechanism clarifying show physical spontaneous adsorption without an external source of energy and increase the randomness of the process during the adsorption, respectively. Finally, the regeneration study demonstrated that the nanocomposite could be utilized for multiple adsorption-desorption cycles, proposing the HA/Mg-Al LDH as an economically and environmentally friendly adsorbent in the adsorption of anionic dyes in water treatment processes.

Iron-doped carbon nanotubes with magnetic enhanced Fe(VI) degradation of arsanilic acid and inorganic arsenic: Role of intermediate iron species and electron transfer

Arsanilic acid (p-AsA), a prevalently used feed additive, is frequently detected in environment posing a great threat to humans. Potassium ferrate (Fe(VI)) was an efficient way to tackle arsenic contamination under acid and neutral conditions. However, Fe(VI) showed a noneffective removal of p-AsA under alkaline conditions due to its oxidation capacity attenuation. Herein, a magnetic iron-doped carbon nanotubes (F-CNT) was successfully prepared and further catalyzed Fe(VI) to remove p-AsA and total As species. The Fe(VI)/F-CNT system showed an excellent capability to oxidize p-AsA and adsorb total As species over an environment-related pH range of 6-9. The high-valent iron intermediates Fe(V)/Fe(IV) and the mediated electron-transfer played a significant part in the degradation of p-AsA according to the probes/scavengers experiments and galvanic oxidation process. Moreover, the situ formed iron hydroxide oxide and F-CNT significantly improved the adsorption capacity for total As species. The electron-donating groups (semiquinone and hydroquinone) and high graphitization of F-CNT were responsible for activating Fe(VI) based on the analysis of X-ray photoelectron spectroscopy (XPS). Density functional theory calculations and the detected degradation products both indicated that the amino group and the C-As bond of p-AsA were main reactive sites. Notably, Fe(VI)/F-CNT system was resistant to the interference from Cl-, SO42-, and HCO3-, and could effectively remove p-AsA and total As species even in the presence of complex water matrix. In summary, this work proposed an efficient method to use Fe(VI) for degrading pollutants under alkaline conditions and explore a new technology for livestock wastewater advanced treatment.

Bimetallic PCN-333 with Modulated Crystallization and a Porosity Structure for a Highly Efficient Removal of Congo Red

Bimetallic metal-organic frameworks (BMOFs) have garnered significant attention in the field of environmental remediation due to their more diverse adsorption sites compared to monometallic metal-organic frameworks (MOFs). Different energy barriers must be overcome for different metal ions and organic linkers to form MOFs. However, the impact of the synthesis temperature on the crystallization and porosity structure of BMOFs has been rarely studied. In this work, PCN-333 series-based BMOFs with different Fe/Al ratios were prepared by a solvothermal method at temperatures of both 135 and 150 °C. The synthesis temperature and Fe/Al ratio have significant effects on the crystal structure and specific surface area of bimetallic PCN-333, leading to the different adsorption performance of the PCN-333 for Congo red (CR). The Fe/Al-PCN-333-135(3:1) and Fe-PCN-333-150 exhibited the maximum CR adsorption capacities of 3233 and 3933 mg/g, respectively, surpassing the capacities of most previously documented adsorbents. The Langmuir model and pseudo-second-order kinetics can well describe the adsorption process of CR on Fe/Al-PCN-333-135(3:1) and Fe-PCN-333-150. Combining the isotherm adsorption behavior with the thermodynamic parameters, CR adsorption on BMOFs is a single-layer endothermic chemical adsorption. Furthermore, Fe/Al-PCN-333-135(3:1) and Fe-PCN-333-150 exhibited regenerability and reusability for three cycles with reasonable efficiency. This work is of great significance in the field of engineering BMOF materials to treat dye wastewater.

The effect of synthesis conditions on the in situ grown MIL-100(Fe)-chitosan beads: Interplay between structural properties and arsenic adsorption

Efficient sequestration of arsenic from drinking water is a global need. Herein we report eco-friendly porous hybrid adsorbent beads for removal of arsenic, through in situ synthesis of MIL-100(Fe) in the chitosan solvogel. To understand the structural vs. performance correlation, series of hybrid adsorbents were synthesized by modulating synthesis conditions like temperature, crystallization time, and concentration. Adsorbents were investigated using PXRD, FT-IR, SEM, and ICP-OES. Intriguing correlation between crystallinity and adsorption performance was observed as low and high crystalline MIL-100(Fe)-chitosan (ChitFe5 and ChitFe7, respectively) exhibited exceptional adsorption towards As5+ by removing it from water with 99% efficiency, whereas for As3+ species removal of about 85% was afforded. Adsorption isotherms indicated that increase in crystallinity (ChitFe5 -> ChitFe7), adsorption capacities of As5+ and As3+ increased from 23.2 to 64.5, and from 28.1 to 35.3 mg/g, respectively. Selectivity tests of the adsorbents towards As5+ and As3+ over competitive anions in the equimolar competitive systems having nitrates, sulfates, and carbonates demonstrated that the performance of the absorbents was fully maintained, relative to the control system. Through this study a highly selective and efficient adsorbent for arsenic species is designed and a clear insight into the structural tuning and its effect on adsorption performance is provided.

Synthesis of 2-amino-terephthalic acid crosslinked chitosan/bentonite hydrogel; an efficient adsorbent for anionic dyes and laccase

This research article presents the fabrication of NH2-terephthalic acid crosslinked chitosan-bentonite composite, which adopted a facile synthesis approach and offered efficient adsorption capacity for organic dyes. A novel hydrogel material named CB 5:1 demonstrated remarkable adsorption for anionic dyes (Congo red (CR) and brilliant blue (BB)) while showing a negligible affinity for cationic dyes. Adsorption isotherm studies revealed the adsorption capacity of 4950 mg/g and 2053 mg/g (per g of composite's dry weight) for CR and BB following the Langmuir adsorption model. Kinetics and thermodynamic studies were also conducted while the adsorption of anionic dyes in the presence of metal ions, cationic dyes, anionic dyes, and in simulated water remained unaffected. Laccase, an industrially important enzyme, was also immobilized on CB 5:1 to achieve enzyme stability and reusability, resulting in a staggering immobilization capacity (4782 mg/g) at pH 6.0. Laccase immobilized product was employed to perform dye degradation (> 90 % for CR and > 75 % for BB), and the reusability was tested. Overall, our crosslinked product proved appealing for removing high concentrations of anionic organic dyes from polluted water and could be envisaged for practical use.

Adsorption behavior and mechanism of modified Fe-based metal-organic framework for different kinds of arsenic pollutants

Arsenic in water environment can present significant threats to human health, and eliminating arsenic pollutants from wastewater is crucial. Based on our previously reported work, this study delved into the adsorption behavior and mechanism of different arsenic contaminants (p-ASA, ROX, As(V), and DMA) on the activated Fe-based metal-organic framework (activated MIL-88A). The results show that activated MIL-88A exhibits exceptional adsorption capabilities toward diverse arsenic pollutants. The adsorption process is endothermic, spontaneous, and viable, and chemical adsorption plays a leading role. The remarkable adsorption capacity of activated MIL-88A to various arsenic pollutants is primarily attributed to coordination, while hydrogen bonding also assumes a significant role in the elimination of p-ASA and ROX. Additionally, we investigated the impact of arsenic molecule shape and size, solution pH, and the existence of specific anions and dissolved organic matter (DOM) on the adsorption of different arsenic pollutants. This study can provide valuable insights for further exploring the selective adsorption of different kinds of arsenic species by Fe-based MOF materials and improving the adsorption efficiency of MOFs.

Rapid and convenient synthesis of "green" ammonium-modified chitosan composite sponge with the existence of ascorbic acid for highly efficient removal of Congo red (CR)

In this study, a new green composite sponge made of chitosan and modified with ammonium ascorbate (ACS-CIT) was synthesized in just 10 min. Compared with CS-CIT (sponge prepared from acetic acid), ACS-CIT exhibits significantly enhanced adsorption performance for CR, with the saturated adsorption capacities increased from 353.667 to 1261.639 mg·g-1. The adsorption mechanism can be summarized as the generation of more hydrogen bonds, electrostatic attraction, and intra particle diffusion, revealing the addition of ascorbic acid introduced more hydroxyl groups, thereby enhancing the hydrogen bonding force, and the ammonium modification of chitosan improved the electrostatic attraction of the material, resulting in a significant increase in its adsorption capacity. Additionally, the prepared ACS-CIT showed excellent CR removal performance even in the presence of multiple interfering factors coexisting in the simulated wastewater, and the adsorption capacity remained stable after at least five cycles. Furthermore, the maximum bed capacity of ACS-CIT for CR is 1152.829 mg·g-1 under the given conditions of a flow rate of 1 mL·min-1, inlet concentration of 150 mg·L-1, a bed height of 1 cm respectively, and the breakthrough curve followed the Thomas model. The results indicated the eco-friendly and recyclable ACS-CIT is a promising adsorbent for CR dye removal in water.

Process Optimization and Equilibrium, Thermodynamic, and Kinetic Modeling of Toxic Congo Red Dye Adsorption from Aqueous Solutions Using a Copper Ferrite Nanocomposite Adsorbent

In the present investigation of copper ferrite, a CuFe2O4 nanocomposite adsorbent was synthesized using the sol-gel method, and its relevance in the adsorptive elimination of the toxic Congo red (CR) aqueous phase was examined. A variety of structural methods were used to analyze the CuFe2O4 nanocomposite; the as-synthesized nanocomposite had agglomerated clusters with a porous, irregular, rough surface that could be seen using FE-SEM, and it also contained carbon (23.47%), oxygen (44.31%), copper (10.21%), and iron (22.01%) in its elemental composition by weight. Experiments were designed to achieve the most optimized system through the utilization of a central composite design (CCD). The highest uptake of CR dye at equilibrium occurred when the initial pH value was 5.5, the adsorbate concentration was 125 mg/L, and the adsorbent dosage was 3.5 g/L. Kinetic studies were conducted, and they showed that the adsorption process followed a pseudo-second-order (PSO) model (regression coefficient, R2 = 0.9998), suggesting a chemisorption mechanism, and the overall reaction rate was governed by both the film and pore diffusion of adsorbate molecules. The process through which dye molecules were taken up onto the particle surface revealed interactions involving electrostatic forces, hydrogen bonding, and pore filling. According to isotherm studies, the equilibrium data exhibited strong agreement with the Langmuir model (R2 = 0.9989), demonstrating a maximum monolayer adsorption capacity (qmax) of 64.72 mg/g at pH 6 and 302 K. Considering the obtained negative ΔG and positive ΔHads and ΔSads values across all tested temperatures in the thermodynamic investigations, it was confirmed that the adsorption process was characterized as endothermic, spontaneous, and feasible, with an increased level of randomness. The CuFe2O4 adsorbent developed in this study is anticipated to find extensive application in effluent treatment, owing to its excellent reusability and remarkable capability to effectively remove CR in comparison to other adsorbents.

High-efficient removal of anionic dye from aqueous solution using metal-organic frameworks@chitosan aerogel rich in benzene structure

With the exponentially increase of dye pollutants, the purification of dye wastewater has been an urgent ecological problem. As a novel type of porous adsorbent, metal-organic frameworks still face challenges in recyclability, agglomeration, and environmentally unfriendly synthesis. Herein, MOF-525 was in-situ growth onto the surface of the chitosan (CS) beads to fabricate MOF-525@CS aerogel. CS was utilized as substrate to uniformly disperse MOF-525, thereby significantly mitigating agglomeration and improving recyclability of MOF-525. The characterization results shown that MOF-525@CS aerogel had a high specific surface area of 103.0 m2·g-1, and MOF-525 was uniformly distributed in the 3D porous structure of CS, and the presence of benzoic acid was detected. The MOF-525@CS aerogel had a remarkable adsorption capacity of 1947 mg·g-1 for Congo red, which is greater than the sum of its parts. MOF-525@CS aerogel also inherited the rapid adsorption ability of MOF-525, removing 80 % of Congo red within 600 min. Such excellent adsorption performance can be attributed to the benzoic acid trapped by CS via CN band to enhance the π-π stacking interactions. Additionally, the utilization of benzoic acid makes the synthesis process of MOF-525@CS aerogel more environmentally friendly. The high-efficient MOF-525@CS aerogel is a competitive candidate for dye pollution adsorption.

Efficient adsorption of methylene blue in water by nitro-functionalized metal-organic skeleton‑calcium alginate composite aerogel

This paper presents the first investigation of the adsorption performance of methylene blue by the nitro-functionalized metal-organic framework (MIL-88B-NO2). MIL-88B-NO2 has a specific surface area of 836.0 m2/g, which is 109.8 % higher than MIL-88B. The maximum adsorption capacity of methylene blue is 383.6 mg/g, which is 68.2 % higher than that of MIL-88B. This phenomenon can be attributed to the great increase in specific surface area and the introduction of nitro-functional groups. However, its microcrystalline nature makes it difficult to remove in practical applications and quickly causes secondary pollution. Therefore, the composite of MIL-88B-NO2 and calcium alginate (CA) to form aerogel maintains the inherent properties of the two materials and makes it easy to recycle. The utmost adsorption capability of MIL-88B-NO2/CA-2 aerogel is 721.0 mg/g. Compared with MIL-88B-NO2, the adsorption performance of MIL-88B-NO2/CA-2 aerogel is further improved by 88.0 %. The higher adsorption capacity of the adsorbent may be due to the synergistic interplay of electrostatic attraction, π-π conjugation, hydrogen bonding, metal coordination effect, and physicochemical properties. Also, MIL-88B-NO2/CA-2 aerogel has good recyclability, indicating that it has broad application prospects in the removal of positive dyes in contaminated water.

Adsorptive removal of Safranine T dye from aqueous solutions using sodium alginate-Festuca arundinacea seeds bio-composite microbeads

In this study, composite microbeads were prepared using Festuca arundinacea seeds and sodium alginate biopolymer at different ratios and utilized as sorbents for the sorption of Safranine T from wastewater. The sorbents were characterized by FTIR, SEM, XRD, and BET analysis. According to BET analysis, the specific surface area of the adsorbents was calculated to be 10.99 m2/g and the surface was found to be mesoporous. The optimum conditions for adsorption studies including initial pH (2-12), concentration (10-50 mg/L), contact time (0-150 min), and adsorbent mass (0.05 g/50 mL-0.25 g/50 mL) were determined at 25 °C. The raw data obtained from sorption tests were applied to Freundlich, Langmuir-1, Langmuir-2, Langmuir-3, Langmuir-4, Temkin, Toth, and Koble-Corrigan isotherm models. The best results were obtained from the Langmuir-2 and accordingly the qm values were calculated as 454.54, 833.33, and 625.00 mg/g for FA, FA-SA-20, and FA-SA-30 at 25 °C, respectively. Adsorption kinetic data illustrated that the process followed the PSO model. Reusability and desorption studies were performed for composite microbeads. Additionally, the thermodynamic studies were performed at 25, 35 and 45 °C. Considering all these results, it was seen that the FA-SA-20 composite had the highest adsorption capacity and the best desorption efficiency.

Simple synthesis of chitosan/alginate/graphene oxide/UiO-67 amphoteric aerogels: Characterization, adsorption mechanism and application for removal of cationic and anionic dyes from complex dye media

A chitosan/alginate/graphene oxide/UiO-67 (CS/SA/GO/UiO-67) amphoteric aerogel was synthesized successfully. A series of characterization experiments of CS/SA/GO/UiO-67 amphoteric aerogel was performed by SEM, EDS, FT-IR, TGA, XRD, BET, and zeta potential. The competitive adsorption properties of different adsorbents for complex dyes wastewater (MB and CR) at room temperature (298 K) were compared. Langmuir isotherm model predicted that the maximum adsorption quantity of CS/SA/GO/UiO-67 for CR and MB was 1091.61 and 1313.95 mg/g, respectively. The optimum pH values of CS/SA/GO/UiO-67 for the adsorption of CR and MB were 5 and 10, respectively. The kinetic analysis showed that the adsorption of MB and CR on CS/SA/GO/UiO-67 was more suitable for the pseudo-second-order and pseudo-first-order kinetic model, respectively. The isotherm study revealed that the adsorption of MB and CR was consistent with the Langmuir isotherm model. The thermodynamic study demonstrated that the adsorption process of MB and CR was exothermic and spontaneous. FT-IR analysis and zeta potential characterization experiments revealed that the adsorption mechanism of MB and CR on CS/SA/GO/UiO-67 depended on π-π bond, hydrogen bond, and electrostatic attraction. Repeatable experiments showed that the removal rates of MB and CR of CS/SA/GO/UiO-67 after six cycles of adsorption were 67.19 and 60.82 %, respectively.