Cost-effective removal of toxic methylene blue dye from textile effluents by new integrated crosslinked chitosan/aspartic acid hydrogels

Enhanced Removal of Cd(II) Ions from Aqueous Media via Adsorption on Facilely Synthesized Copper Ferrite Nanoparticles

In this study, magnetic copper ferrite (CuFe2O4) nanoparticles were synthesized via the Pechini sol-gel method and evaluated for the removal of Cd(II) ions from aqueous solutions. PF600 and PF800 refer to the samples that were synthesized at 600 °C and 800 °C, respectively. Comprehensive characterization using FTIR, XRD, FE-SEM, HR-TEM, and EDX confirmed the successful formation of CuFe2O4 spinel structures, with crystallite sizes of 22.64 nm (PF600) and 30.13 nm (PF800). FE-SEM analysis revealed particle diameters of 154.98 nm (PF600) and 230.05 nm (PF800), exhibiting spherical and irregular shapes. HR-TEM analysis further confirmed the presence of aggregated nanoparticles with average diameters of 52.26 nm (PF600) and 98.32 nm (PF800). The PF600 and PF800 nanoparticles exhibited exceptional adsorption capacities of 377.36 mg/g and 322.58 mg/g, respectively, significantly outperforming many materials reported in the literature. Adsorption followed the Langmuir isotherm model and pseudo-second-order kinetics, indicating monolayer adsorption and strong physisorption. The process was spontaneous, exothermic, and predominantly physical. Reusability tests demonstrated high adsorption efficiency across multiple cycles when desorbed with a 0.5 M ethylenediaminetetraacetic acid (EDTA) solution, emphasizing the practical applicability of these nanoparticles. The inherent magnetic properties of CuFe2O4 facilitated easy separation from the aqueous medium using a magnet, enabling efficient and cost-effective recovery of the adsorbent. These findings highlight the potential of CuFe2O4 nanoparticles, particularly PF600, for the effective and sustainable removal of Cd(II) ions from water.

In situ growth of HKUST-1 on electrospun polyacrylonitrile nanofibers/regenerated cellulose aerogel for efficient methylene blue adsorption

Dyes, as organic pollutants, are causing increasingly severe environmental problems. Metal-organic frameworks (MOFs) are considered promising dye adsorbents; however, their application is limited due to their powder or solid particle forms and limited reusability. Therefore, this study proposes an innovative approach to develop a novel MOF-based composite aerogel, specifically a HKUST-1/polyacrylonitrile nanofibers/regenerated cellulose (HKUST-1/PANNs/RC) composite aerogel adsorbent, for the adsorption of pollutants in water. This adsorbent was successfully prepared using a simple method combining covalent crosslinking, quick freezing, freeze-drying, in-situ growth synthesis, and solvothermal techniques. The HKUST-1/PANNs/RC composite aerogel exhibits a significantly large specific surface area, which is approximately 64 times greater than that of PANNs/RC (10.45 m2·g-1), with a specific surface area of 669.9 m2·g-1. The PANNs serve as a support framework, imparting excellent mechanical properties to the composite aerogel, enhancing its overall stability and recoverability. Additionally, the composite aerogel contains numerous -COOH and -OH groups on its surface, providing strong acid resistance and facilitating interactions with pollutant molecules through electrostatic interactions, π-π conjugation, n-π* interactions, and hydrogen bonding, thereby promoting the adsorption process. Using methylene blue (MB) as a probe molecule, the study results demonstrate that the HKUST-1/PANNs/RC composite aerogel has an adsorption capacity of 522.01 mg·g-1 for MB (25 h), exhibiting excellent adsorption performance. This composite aerogel shows great potential for application in water pollution control.

Facile preparation of interpenetrating network hydrogel adsorbent from starch- chitosan for effective removal of methylene blue in water

Hydrogels based on biopolymers have attracted considerable interest in the last decades. Herein, an interpenetrating network hydrogel (IPN-Gel) adsorbent from starch-chitosan was fabricated facilely in one-pot through tandem Schiff base reaction and photopolymerization. First, aldehyde starch (DAS) was synthesized by the reaction of soluble starch with sodium periodate. Afterward, acrylamide (AM), 2-acrylamido-2-methylpropanesulfonic acid (AMPS), polyethylene glycol dimethacrylate (PEGDMA), photoinitiator, chitosan and DAS were dissolved in water to obtain a clear solution. Schiff base reaction between chitosan and DAS took place quickly to form the first network, and then photopolymerization of AM, AMPS, and PEGDMA occurred under ultraviolet radiation to form the second network. The preparation conditions of the as-prepared IPN-Gel were optimized with two indexes of gel mass fraction and swelling ratio. Its swelling behavior with pH and temperature change was explored. Finally, its adsorption performance was characterized with methylene blue (MB) as a model contaminant. The maximum adsorption capacity of IPN-Gel can reach 2039 mg·g-1 at pH =10. Its adsorption performance accords with Langmuir isothermal model and pseudo-second-order kinetic model and it was mainly controlled by chemisorption. This strategy is expected to found broad application prospects in the preparation of hydrogel adsorbents.

Environmentally Benign Freeze-dried Biopolymer-Based Cryogels for Textile Wastewater Treatments: A review

Motivated by sustainability and environmental protection, great efforts have been paid towards water purification and attaining complete decolorization and detoxification of polluted water effluent. Textile effluent, the main participant in water pollution, is a complicated mixture of toxic pollutants which seriously impact human health and the entire ecosystem. Developing effective materials for potential removal of the water contaminants is urgent. Recently, cryogels have been applied in wastewater sectors due to their unique physiochemical attributes(e.g. high surface area, lightweight, porosity, swelling-deswelling, and high permeability). These features robustly affected the cryogel's performance, as adsorbent material, particularly in wastewater sectors. This review serves as a detailed reference to the cryogels derived from biopolymers and applied as adsorbents for the purification of textile drainage. We displayed an overview of: the existing contaminants in textile effluents (dyes and heavy metals), their sources, and toxicity; advantages and disadvantages of the most common treatment techniques (biodegradation, advanced chemical oxidation, membrane filtration, coagulation/flocculation, adsorption). A simple background about cryogels (definition, cryogelation technique, significant features as adsorbents, and the adsorption mechanisms) is also discussed. Finally, the bio-based cryogels dependent on biopolymers such as chitosan, xanthan, cellulose, PVA, and PVP, are fully discussed with evaluating their maximum adsorption capacity.

High efficiency of treated-phengite clay by sodium hydroxide for the Congo red dye adsorption: Optimization, cost estimation, and mechanism study

Wastewater textile dye treatment is a challenge that requires the development of eco-friendly technology to avoid the alarming problems associated with water scarcity and health-environment. This study investigated the potential of phengite clay as naturally low-cost abundant clay from Tamgroute, Morocco (TMG) that was activated with a 0.1 M NaOH base (TMGB) after calcination at 850 °C for 3 h (TMGC) before its application in the Congo red (CR) anionic dye from the aqueous solution. The effect of various key operational parameters: adsorbent dose, contact time, dye concentration, pH, temperature, and the effect of salts, was studied by a series of adsorption experiments in a batch system, which affected the adsorption performance of TMG, TMGC, and TMGB for CR dye removal. In addition, the properties of adsorption kinetics, isotherms, and thermodynamics were also studied. Experimental results showed that optimal adsorption occurred at an acidic pH. At a CR concentration of 100 mg L-1, equilibrium elimination rates were 68%, 38%, and 92% for TMG, TMGC, and TMGB, respectively. The adsorption process is rapid, follows pseudo-second-order kinetics, and is best described by a Temkin and Langmuir isotherm. The thermodynamic parameters indicated that the adsorption of CR onto TMGB is endothermic and spontaneous. The experimental values of CR adsorption on TMGB are consistent with the predictions of the response surface methodology. These led to a maximum removal rate of 99.97% under the following conditions: pH = 2, TMGB dose of 7 g L-1, and CR concentration of 50 mg L-1. The adsorbent TMGB's relatively low preparation cost of around $2.629 g-1 and its ability to regenerate in more than 6 thermal calcination cycles with a CR removal rate of around 56.98%, stimulate its use for textile effluent treatment on a pilot industrial scale.

Upcycling of sugar refining mud solid waste as a novel adsorbent for removing methylene blue and Congo red from wastewater

The feasibility of utilizing the mud solid waste (MSW) produced during the carbonation process of sugar refining as a cost-effective and environmentally friendly alternative for the water removal of methylene blue (MB) and Congo red (CR), being highly utilized organic dyes representing cationic and anionic species, respectively is presented. Prior to its use, the MSW was dried at 110 °C for 24 h and sieved through a 100-mesh screen. The chief constituent of the MSW utilized was CaCO3, with a point of zero charge (PZC) found at pH 8.4 and 7.96 m2 g-1 total surface area. XRD and FTIR data indicate the presence of interactions between the dyes and the MSW surface, indicating effective adsorption. Different variables, such as initial dye concentration, MSW weight, solution pH, contact time, and temperature, were all examined to determine the optimal dye removal conditions. A central composite design (CCD) approach based on response surface methodology (RSM) modeling was utilized to identify statistically significant parameters for MB and CR adsorption capacities onto the MSW adsorbent. The removal equilibrium was typically reached in 120 minutes, with the greatest removal efficiency of CR taking place at pH 2 and 328 K, while the highest MB removal efficiency was obtained at pH 12 and 296 K. Kinetic studies suggest the adsorption of both dyes on the MSW follow pseudo-second-order rates, as evident through the high correlations obtained. Linearized and non-linearized Langmuir models showed strong correlations indicating maximum adsorption capacities of 86.6 and 72.3 mg g-1 for MB and CR, respectively. High regeneration and reusability potential of the MSW was demonstrated especially for the adsorption of CR, where the removal efficiency was nearly constant throughout five adsorption cycles, ranging from 93 to 91%, while the reduction in the removal for MB was much more significantly impacted, diminishing from 95 to 79% after the five cycles.

Enhanced dye sequestration with natural polysaccharides-based hydrogels: A review

Due to the expansion of industrial activities, the concentration of dyes in water has been increasing. The dire need to remove these pollutants from water has been heavily discussed. This study focuses on the reproducible and sustainable solution for wastewater treatment and dye annihilation challenges. Adsorption has been rated the most practical way of the several decolorization procedures due to its minimal initial investment, convenient utility, and high-performance caliber. Hydrogels, which are three-dimensional polymer networks, are notable because of their potential to regenerate, biodegrade, absorb bulky amounts of water, respond to stimuli, and have unique morphologies. Natural polysaccharide hydrogels are chosen over synthetic ones because they are robust, bioresorbable, non-toxic, and cheaply accessible. This study has covered six biopolymers, including chitosan, cellulose, pectin, sodium alginate, guar gum, and starch, consisting of their chemical architecture, origins, characteristics, and uses. The next part describes these polysaccharide-based hydrogels, including their manufacturing techniques, chemical alterations, and adsorption effectiveness. It is deeply evaluated how size and shape affect the adsorption rate, which has not been addressed in any prior research. To assist the readers in identifying areas for further research in this subject, limitations of these hydrogels and future views are provided in the conclusion.

Optimization by Box-Behnken design for environmental contaminants removal using magnetic nanocomposite

In this study, a CoO-Fe2O3/SiO2/TiO2 (CIST) nanocomposite was synthesized and utilized as an adsorbent to remove methylene blue (MB), malachite green (MG), and copper (Cu) from aqueous environments. The synthesized nanocomposite was characterized using field emission scanning electron microscopy (FE-SEM), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and X-ray diffraction (XRD). Input parameters included pH (3-10), contact time (10-30 min), adsorbent amount (0.01-0.03 g), and pollutant concentration (20-60 mg L-1). The effects of these parameters on the removal process efficiency were modeled and optimized using the response surface methodology (RSM) based on the Box-Behnken design (BBD). The RSM-BBD method demonstrated the capability to develop a second-degree polynomial model with high validity (R2 ˃ 0.99) for the removal process. The optimization results using the RSM-BBD method revealed a removal efficiency of 98.01%, 93.06%, and 88.26% for MB, MG, and Cu, respectively, under optimal conditions. These conditions were a pH of 6, contact time of 10 min, adsorbent amount of 0.025 g, and concentration of 20 mg L-1. The synthesized adsorbent was recovered through five consecutive adsorption-desorption cycles using hydrochloric acid. The results showed an approximately 12% reduction from the first to the seventh cycle. Also, MB, MG, and Cu removal from real water samples in optimal conditions was achieved in the range of 81.69-98.18%. This study demonstrates the potential use of CIST nanocomposite as an accessible and reusable option for removing MB, MG, and Cu pollutants from aquatic environments.

Chitosan coated biomass waste-based magnetic hydrogel beads for the removal of methylene blue

Due to developing technology and increasing population, human needs have increased, and textile activities have gained momentum. Many synthetic dyestuffs are used to meet the needs in this field. In this study, a cheap, useful, innovative, environmentally friendly and sustainable adsorbent was developed for the removal of Methylene Blue(MB), which is one of the dyes that is harmful to the environment. In the cultivation of fruit trees, in addition to the product, very high amounts of by-products/waste (garbage, branches, bark, leaves, etc.) are produced. In this direction, fig tree wastes were immobilized with chitosan, made magnetic, and MB adsorption on the developed adsorbent was examined in a batch system. Glutaraldehyde was used as crosslinker. Characterization of synthesized glutaraldehyde cross-linked chitosan-coated magnetic vegetable waste composite beads (g-CMBW) was carried out by SEM, EDX, FTIR and XRD. In the study, the effects of temperature (25-55 °C), pH (3.0-8.0), initial MB concentration (10-250mg/L), contact time (5-360min) and the amount of adsorbent (2-10 g/L) on MB adsorption with g-CMBW were examined. The optimum conditions obtained were determined as pH 6.0, temperature 25 °C, adsorbent amount 6 g/L, and contact time 120 min. The maximum adsorption capacity in MB removal using g-CMBW composite beads was calculated as 103.1 mg/g according to the Langmuir isotherm model. The temperature studies showed that the adsorption capacity decreased with increasing temperature, showing that the system was exothermic. In light of these results, it was determined that there are new promising adsorbents of natural origin, with higher adsorption capacity, lower cost, and alternatives to commercially used adsorbents in the removal of MB from aqueous media.

Development of chitosan biopolymer by chemically modified orange peel for safranin O dye removal: A sustainable adsorbent and adsorption modeling using RSM-BBD

This study aimed to develop a biocomposite (hereinafter, CHI/OP-H2SO4) via the functionalization of chitosan (CHI) biopolymer by chemically modified orange peel (OP-H2SO4). The physicochemical characteristics of CHI/OP-H2SO4 were studied using methods such as pHpzc, XRD, FTIR, BET, and FESEM-EDX. The efficacy of the CHI/OP-H2SO4 biocomposite in removing cationic dye (safranin O, SAF-O) from aqueous solutions was assessed. The Box-Behnken Design (BBD) based on response surface methodology (RSM) was employed to optimize the adsorption performance of CHI/OP-H2SO4, considering factors such as A: CHI/OP-H2SO4 dose (0.02-0.08 g), B: pH (4-10), and C: time (10-60 min). The pseudo-first-order and Freundlich isotherm models align well with the experimental data of SAF-O adsorption by CHI/OP-H2SO4. The excellent adsorption capacity for CHI/OP-H2SO4 was recorded (321.2 mg/g). The notable adsorption of SAF-O onto CHI/OP-H2SO4 is attributed primarily to electrostatic forces between the acidic groups of CHI/OP-H2SO4 and the SAF-O cation, along with H-bonding, and n-π interactions. By transforming waste materials into valuable resources, this approach not only mitigates environmental impact but also produces a promising and sustainable adsorbent for the removal of cationic dyes, exemplified here by the effective removal of SAF-O dye.

Low-cost and eco-friendly PVA/carrageenan membrane to efficiently remove cationic dyes from water: Isotherms, kinetics, thermodynamics, and regeneration study

Methylene blue (MB), a common dye in the textile industry, has a multitude of detrimental consequences on humans and the environment. Accordingly, it is necessary to remove dyes from water to guarantee our health and sustainable ecosystem. In this study, we developed polyvinyl alcohol (PVA)-based hydrogel adsorbents with high adsorption capacity by adding three types of carrageenan (kappa, iota, and lambda) to remove MB from water. Thanks to the functional groups, the PVA/carrageenan membranes dramatically increased the removal efficiency (kappa, 98.8%; iota, 97.0%; lambda, 95.4%) compared to the pure PVA membrane (6.3%). Among the three types of PVA/carrageenan membranes, the PVA/kappa-carrageenan membrane exhibited the best adsorption capacity of 147.8 mg/g. This result implies that steric hindrance was considerably significant, given that kappa carrageenan has only one sulfate group in the repeating unit, whereas iota and lambda carrageenan composite PVA membranes possess two and three sulfate groups. Apart from the maximum adsorption capacity, this study addressed a variety of characteristics of PVA/carrageenan membranes such as the effects of initial MB concentration, kappa carrageenan weight percentage, contact time, adsorbent dosage, and temperature on the adsorption performance. In addition, the kinetic and thermodynamic studies were also carried out. Lastly, the reusability of the PVA/carrageenan membrane was verified by the 98% removal efficiency maintained after five adsorption-desorption cycles.

Structure, the energy, sorption and biological properties of chiral salts of chitosan with l- and d-ascorbic acid

The influence of l- and d-ascorbic acid diastereomers on the structure, supramolecular ordering, energy, sorption and biological properties of heterochiral (D-L) and homochiral (D-D) salt complexes of chitosan (d-glucan)-acid was studied. The thermal effect of dissolving chitosan in l-ascorbic acid and the protonation degree of (D-L)-salts were lower than those in the medium of the d-isomer. Homochiral (D-D) salts, in contrast to heterochiral (D-L) ones, are distinguished by a more developed system of intermolecular and intramolecular contacts, a more ordered and equilibrium supramolecular organization of macrochains, a higher crystallinity degree, and a smaller amount of crystallization water. The sorption isotherms of chiral salts were approximated by the thermal equation of sorption and the superposition of the Langmuir and Flory-Huggins isotherms. Significant differences were found in the limiting value and energy of sorption, the constant of adsorption equilibrium, the limiting sorption capacity of the localized mode of water, and the Gibbs mixing energy. Biotesting on non-vascular (Scenedesmus quadricauda) and vascular eukaryotes (Linum usitatissimum) revealed the growth-stimulating effect of the D-D salts. The obtained results confirm our hypothesis of the homochiral salt complexes d-glucan-d-ascorbic acid best corresponding to the principles of the functional organization of biological objects.

Renewable-based treatment solution of Reactive Blue 21 dye on fly ash as low-cost and sustainable adsorbent

This study investigated the removal of Reactive Blue 21 (RB 21) dye from aqueous solutions by adsorption, evaluating the waste fly ash (FA). The effects of the parameters, such as initial dye concentration (100-750 mg/L), initial pH (2.0-8.0), adsorbent dose (1.0-4.0 g/L), and temperature (298-323 K) on the adsorption process were investigated. The optimum initial pH value was 2.0 for the highest RB21 dye removal (75.2 mg/g). At optimized conditions (pH 2.0, an adsorbent dosage of 1.0 g/L, a dye concentration of 750 mg/L, and an equilibrium time of 72 h), the highest adsorption capacity was found to be 105.2 mg/g. Moreover, the results of the kinetic studies fitted the pseudo-second-order kinetic model. Equilibrium data were best represented by the Langmuir isotherm model, with a maximum monolayer adsorption capacity of 103.41 mg/g at 323 K. ΔGads0 values were negative and varied from 11.64 to 9.50 kJ/mol in the temperature range of 298-323 K, the values of enthalpy (ΔHadso) and entropy (ΔSadso) of thermodynamics parameters were calculated as 37.62 kJ/mol and 86.67 J/mol K, respectively, indicating that this process was endothermic. Furthermore, the adsorbent costs for powdered activated carbon (PAC) and FA to remove 1 kg of RB 21 dye from aqueous solutions are calculated as 2.52 U.S. $ and 0.34 U.S. $, respectively. It is seen that the cost of FA is approximately 7.4 times lower than PAC. The results showed that FA, a low-cost industrial waste, was promising for the adsorption of RB 21 from aqueous solutions.

Chitosan Hydrogels for Water Purification Applications

Chitosan-based hydrogels have gained significant attention for their potential applications in water treatment and purification due to their remarkable properties such as bioavailability, biocompatibility, biodegradability, environmental friendliness, high pollutants adsorption capacity, and water adsorption capacity. This article comprehensively reviews recent advances in chitosan-based hydrogel materials for water purification applications. The synthesis methods, structural properties, and water purification performance of chitosan-based hydrogels are critically analyzed. The incorporation of various nanomaterials into chitosan-based hydrogels, such as nanoparticles, graphene, and metal-organic frameworks, has been explored to enhance their performance. The mechanisms of water purification, including adsorption, filtration, and antimicrobial activity, are also discussed in detail. The potential of chitosan-based hydrogels for the removal of pollutants, such as heavy metals, organic contaminants, and microorganisms, from water sources is highlighted. Moreover, the challenges and future perspectives of chitosan-based hydrogels in water treatment and water purification applications are also illustrated. Overall, this article provides valuable insights into the current state of the art regarding chitosan-based hydrogels for water purification applications and highlights their potential for addressing global water pollution challenges.