Preparation of sodium alginate/Cur-PLA hydrogel beads for curcumin encapsulation

Preparation and Characterization of Silica-Coated Sodium Alginate Hydrogel Beads and the Delivery of Curcumin

In this study, to address the defects of sodium alginate (SA), such as its susceptibility to disintegration, silica was coated on the outer layer of sodium alginate hydrogel beads in order to improve its swelling and slow-release properties. Tetraethyl orthosilicate (TEOS) was used as the hydrolyzed precursor, and the solution of silica precursor was prepared by sol-gel reaction under acidic conditions. Then SA-silica hydrogel beads prepared by ionic crosslinking method were immersed into the SiO2 precursor solution to prepare SA-silica hydrogel beads. The chemical structure and morphology of the hydrogel beads were characterized by XRD, FTIR, and SEM, and the results showed that the surface of SA-silica beads was successfully encapsulated with the outer layer of SiO2, and the surface was smooth and dense. The swelling experiments showed that the swelling performance effectively decreased with the increase of TEOS molar concentration, and the maximum swelling ratio of the hydrogel beads decreased from 41.07 to 14.3, and the time to reach the maximum swelling ratio was prolonged from 4 h to 8 h. The sustained-release experiments showed that the SA-silica hydrogel beads possessed a good pH sensitivity, and the time of sustained-release was significantly prolonged in vitro. Hemolysis and cytotoxicity experiments showed that the SA-silica hydrogel beads were biocompatible when the TEOS molar concentration was lower than 0.375 M. The SA-silica-2 hydrogel beads had good biocompatibility, swelling properties, and slow-release properties at the same time.

Gelatin-nanocellulose stabilized emulsion-filled hydrogel beads loaded with curcumin: Preparation, encapsulation and release behavior

In this study, the curcumin was firstly encapsulated in gelatin (GLT) and/or cellulose nanocrystals (CNC) stabilized emulsions, then further mixed with sodium alginate (SA) to form emulsion-filled hydrogel beads loaded with curcumin (Cur). The Cur-loaded emulsions showed a droplet size of 20.3-24.4 μm with a uniform distribution. Introducing CNC and/or SA increased the viscosity of emulsions accompanied by viscoelastic transition, while the modulus was reduced due to destruction of GLT gel. Cur was doubly immobilized in the hydrogel beads with >90 % of encapsulation efficiency. The results of simulated gastrointestinal tract experiments revealed that the beads possessed a good pH sensitivity and controlled release behavior to prolong the retention of Cur in the gastrointestinal tract. After 6 h of UV irradiation, the Cur-loaded emulsion-filled hydrogel beads showed a higher antioxidant activity than that of pure Cur, effectively delaying the photodegradation of Cur. In addition, the beads had better stability in aqueous and acidic environments, which was favorable for prolonging the release of Cur. These results suggest that the emulsion-filled hydrogel beads have great potential for the delivery of lipophilic bioactive molecules.

Construction of chitosan/alginate aerogels with three-dimensional hierarchical pore network structure via hydrogen bonding dissolution and covalent crosslinking synergistic strategy for thermal management systems

To replace traditional petrochemical-based thermal insulation materials, in this work, the chitosan (CHI)/alginate (ALG) (CA) aerogels with three-dimensional hierarchical pore network structure were constructed by compositing CHI and ALG using a synergistic strategy of hydrogen bonding dissolution and covalent crosslinking. The structure and properties were further regulated by crosslinking the CA aerogels with epichlorohydrin (ECH). The CA aerogels exhibited various forms of covalent crosslinking, hydrogen bonding and electrostatic interactions, with hydrogen bonding content reaching 79.12 %. The CA aerogels showed an excellent three-dimensional hierarchical pore network structure, with an average pore size minimum of 15.92 nm. The structure regulation of CA aerogels obtained excellent compressive properties, with an increase of stress and strain by 137.61 % and 45.05 %, which can support a heavy object 5000 times its weight. Additionally, CA aerogels demonstrate excellent thermal insulation properties and low thermal conductivity, comparable to commercially available insulation materials. More importantly, CA aerogels have good cyclic insulation stability and thermal properties, and they have a flame retardancy rating of V-0, which shows the stability of insulation properties and excellent safety. CA aerogels provide new ideas for the development of biomass thermal insulation materials and are expected to be candidates for thermal management applications.

Enhanced Dissolution and Bioavailability of Curcumin Nanocrystals Prepared by Hot Melt Extrusion Technology

Purpose

Curcumin nanocrystals (Cur-NCs) were prepared by hot melt extrusion (HME) technology to improve the dissolution and bioavailability of curcumin (Cur).

Methods

Cur-NCs with different drug-carrier ratios were prepared by one-step extrusion process with Eudragit® EPO (EEP) as the carrier. The dispersed size and solid state of Cur in extruded samples were characterized by dynamic light scattering (DLS), scanning electron microscope (SEM), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). The thermal stability of Cur was analyzed by thermogravimetric analysis (TGA) and high performance liquid chromatography (HPLC). Dissolution and pharmacokinetics were studied to evaluate the improvement of dissolution and absorption of Cur by nano-preparation.

Results

Cur-NCs with particle sizes in the range of 50~150 nm were successfully prepared by using drug-carrier ratios of 1:1, 2:1 and 4:1, and the crystal form of Cur was Form 1 both before and after HME. The extrudate powders showed very efficient dissolution with the cumulative dissolution percentage of 80% in less than 2 min, and the intrinsic dissolution rates of them were 13.68 ± 1.20 mg/min/cm2, 11.78 ± 0.57 mg/min/cm2 and 4.35 ± 0.20 mg/min/cm2, respectively, whereas that of pure Cur was only 0.04 ± 0.00 mg/min/cm2. The TGA data demonstrated that the degradation temperature of Cur was about 250 °C, while the HPLC results showed Cur was degraded when extruded at the temperature over 150 °C. Pharmacokinetic experiment showed a significant improvement in the absorption of Cur. The Cmax of Cur in the Cur-NC group was 1.68 times that of pure Cur group, and the Cmax and area under the curve (AUC0-∞) of metabolites were 2.79 and 4.07 times compared with pure Cur group.

Conclusion

Cur-NCs can be prepared by HME technology in one step, which significantly improves the dissolution and bioavailability of Cur. Such a novel method for preparing insoluble drug nanocrystals has broad application prospects.

Orally ingestible medication utilizing layered double hydroxide nanoparticles strengthened alginate and hyaluronic acid-based hydrogel bead for bowel disease management

In the treatment of bowel diseases such as ulcerative colitis through oral administration, an effective drug delivery system targeting the colon is crucial for enhancing efficacy and minimizing side effects of therapeutic agents. This study focuses on the development of a novel nanocomposite hydrogel bead comprising a synergistic blend of biological macromolecules, namely sodium alginate (ALG) and hyaluronic acid (HA), reinforced with layered double hydroxide nanoparticles (LDHs) for the oral delivery of dual therapeutics. The synthesized hydrogel bead exhibits significantly enhanced gel strength and controllable release of methylprednisolone (MP) and curcumin (CUR), serving as an anti-inflammatory drug and a mucosal healing agent, compared to native ALG or ALG/HA hydrogel beads without LDHs. The physicochemical properties of the synthesized LDHs and hydrogel beads were characterized using various techniques, including scanning electron microscopy, zeta potential measurement, transmission electron microscopy, X-ray diffraction, and energy-dispersive X-ray spectroscopy. In vitro release studies of MP and CUR under simulated gastrointestinal tract (GIT) conditions demonstrate the superior controlled release property of the nanocomposite hydrogel bead, particularly in minimizing premature drug release in the upper GIT environment while sustaining release of over 82 % of drugs in the colonic environment. Thus, the modularly engineered carrier designed for oral colon targeting holds promise as a potential candidate for the treatment of ulcerative colitis.

Construction of a pectin/sodium alginate composite hydrogel delivery system for improving the bioaccessibility of phycocyanin

In this study, different concentrations of sodium alginate were compounded with pectin and phycocyanin to co-prepare composite hydrogel spheres (HP-PC-SA 0.2 %, 0.6 %, 1.0 %, 1.4 %) to evaluate the potential of the composite hydrogel spheres for the application as phycocyanin delivery carriers. The hydrogel spheres' physicochemical properties and bioaccessibility were assessed through scanning electron microscopy, textural analysis, drug-carrying properties evaluation, and in vitro and in vivo controlled release analysis in the gastrointestinal environment. Results indicated that higher sodium alginate concentrations led to smaller pore sizes and denser networks on the surface of hydrogel spheres. The textural properties of hydrogel spheres improved, and their water-holding capacity increased from 93.01 % to 97.97 %. The HP-PC-SA (1.0 %) formulation achieved the highest encapsulation rate and drug loading capacity, at 96.87 % and 6.22 %, respectively. Within the gastrointestinal tract, the composite hydrogel's structure significantly enhanced and protected the phycocyanin's digestibility, achieving a bioaccessibility of up to 88.03 %. In conclusion, our findings offer new insights into improving functionality and the effective use of phycocyanin via pectin-based hydrogel spheres.

Fermentation-inspired macroporous and tough gelatin/sodium alginate hydrogel for accelerated infected wound healing

Gelatin and sodium alginate (SA) are two important biological macromolecules, exhibiting excellent biocompatibility and gel-forming ability. However, traditional SA and gelatin hydrogel displays limited mass transport, low porosity, instability, and poor mechanical properties extremely restricted their therapeutic effect and application scenarios. Herein, microbial fermentation and synergistic toughening strategies were used for preparing macroporous and tough hydrogel. The study investigated the fermentation and toughening conditions of hydrogel. The hydrogel composed of CaCl2 cross-linked physically network and EDC/NHS cross-linked covalently network, exhibiting significantly improved mechanical properties, and excellent recovery efficiency. In addition, the hydrogel has a hierarchical macroporous structure of 100-500 μm, demonstrating high porosity of 10 times, swelling rate of 1541.0 %, and high mass infiltration capability. Further, after Ag+ treatment, the macroporous hydrogel dressing showed outstanding biocompatibility. Compared with non-porous hydrogel, the resulting macroporous hydrogel dressing displayed high antibacterial and antioxidant properties. It could effectively alleviate intracellular ROS formation induced by H2O2.In vivo experiments indicated that it has significantly better effect than non-porous hydrogel in accelerating wound healing. The overall results suggest that the gelatin/SA-based macroporous and tough hydrogel proposed in this study holds excellent prospects for application in wound dressings.

Enhanced environmental stress resistance and functional properties of the curcumin-shellac nano-delivery system: Anti-flocculation of poly-γ-glutamic acid

Curcumin was widely designed as nanoparticles to remove application restrictions. The occurrence of flocculation is a primary factor limiting the application of the curcumin nano-delivery system. To enhance the environmental stress resistance and functional properties of shellac-curcumin nanoparticles (S-Cur-NPs), γ-polyglutamic acid (γ-PGA) was utilized as an anti-flocculant. The encapsulation efficiency and loading capacity of S-Cur-NPs were also improved with γ-PGA incorporation. FTIR and XRD analysis confirmed the presence of amorphous characteristics in S-Cur-NPs and the combination of γ-PGA and shellac was driven by hydrogen bonding. The hydrophilic, thermodynamic, and surface potential of S-Cur-NPs was improved by the incorporation of γ-PGA. This contribution of γ-PGA on S-Cur-NPs effectively mitigated the flocculation occurrence during heating, storage, and in-vitro digestive treatment. Furthermore, it was revealed that γ-PGA enhanced the antibacterial and antioxidant properties of S-Cur-NPs and effectively protected the functional activity against heating, storage, and in-vitro digestion. Release studies conducted in simulated gastrointestinal fluids revealed that S-Cur-NPs have targeted intestinal release properties. Overall, the design of shellac with γ-PGA was a promising strategy to relieve the application stress of shellac and curcumin in the food industry.

Yellow-emitting carbon dots as fluorescent sensors for the rapid determination of curcumin

The non-standard use of curcumin could cause some adverse drug reactions, such as diarrhea, nausea and skin allergies. Thus, the curcumin determination was fundamental to disease treatment and prevention. Herein, a facile and efficient fluorescent probe was developed based on carbon dots, which was prepared through hydrothermal method (o-phenylenediamine and N-isopropylacrylamide as the reaction raw materials). Characteristics of the as-fabricated carbon dots (NCDs) were studied through some analysis techniques, such as UV-vis absorption spectroscopy, transmission electron microscopy, Fourier transform infrared instrument, X-ray photoelectron spectroscopy and fluorescence spectrophotometer. Fluorescence quenching phenomenon could be observed after addition of curcumin. This as-prepared fluorescent probe displayed a significant response for the determination of curcumin with a satisfactorily lower detection limit of 0.017 μM and a considerable linear range of 0.5-50 μM compared to reported literatures. Because of the preeminent repeatability and anti-jamming capability, the as-developed CDs suggested mighty potentiality for actual applications of curcumin detection in real samples and temperature sensing.

Microfluidic Preparation of pH-Responsive Microsphere Fibers and Their Controlled Drug Release Properties

In this study, a capillary microfluidic device was constructed, and sodium alginate solution and a pH-sensitive hydrophobic polymer (p(BMA-co-DAMA-co-MMA)) solution were introduced into the device for the preparation of hydrogel fibers loaded with polymer microspheres. The structure of the microsphere fiber, including the size and spacing of the microspheres, could be controlled by flow rate, and the microspheres were able to degrade and release cargo responding to acidic pH conditions. By modification with carboxymethylcellulose (CMC), alginate hydrogel exhibited enhanced pH sensitivity (shrunk in acidic while swollen in basic condition). This led to an impact on the diffusion rate of the molecules released from the inner microspheres. The microsphere fiber showed dramatic and negligible degradation and drug release in tumor cell (i.e., A431 and A549 cells) and normal cell environments, respectively. These results indicated that the microsphere fiber prepared in this study showed selective drug release in acidic environments, such as tumor and inflammation sites, which could be applied as a smart surgical dressing with normal tissue protective properties.