Ultrasound attenuation of lactobacilli and bifidobacteria: Effect on some technological and probiotic properties

Effect of ultrasound-attenuation on technological and functional properties of two strains of Lactiplantibacillus plantarum isolated from table olives

While probiotics have a wide range of beneficial properties, they can also negatively affect the taste or aroma of foods products by resulting in the phenomenon of post-acidification. Ultrasound (US) is a tool to modulate the metabolism of probiotic bacteria, counteracting post-acidification and improving the performance and functional properties of microorganisms without affecting their viability. The purpose of this paper was to evaluate the effect of 10 different combinations of power (20 and 40 %) and duration (2, 4, 6, 8 and 10 min) of US treatment on two functional strains of Lactiplantibacillus plantarum (c16 and c19) isolated from table olives, with the aim of understanding how, some of the main functional and technological traits (viability, acidification, growth profile under different conditions, antibiotic resistance, viability at pH 2.0 and 0.3 % bile salts), were affected. It was found that the effects were strain dependent, and the best results were obtained for strain c19 in the combinations at 20 % for 8 and 10 min and 40 % for 2 min, where an improvement in functional characteristics was found, with some effects on biofilm stability, inhibition of acidification, without adverse results on some technological properties.

Comparative physiological and transcriptomic analysis of sono-biochemical control over post-acidification of Lactobacillus delbrueckii subsp. bulgaricus

Thermosonication (UT) prestress treatments combining with varied fermentation patterns has been revealed as an effective method to regulate post-acidification as exerted by Lactobacillus delbrueckii subsp. bulgaricus (L. delbrueckii), but sono-biochemical controlling mechanisms remain elusive. This study employed physiological and transcriptomic analysis to explore the response mechanism of L. delbrueckii to UT-induced microstress (600 W, 33 kHz, 10 min). UT stress-induced inhibition of acidification of L. delbrueckii during (post)-fermentation was first confirmed, relying on the UT process parameters such as stress exposure duration and UT power. The significantly enhanced membrane permeability in cells treated by 600 W for 10 min than the microbes stressed by 420 W for 20 min suggested the higher dependence of UT-derived stresses on the treatment durations, relative to the ultrasonic powers. In addition, ultrasonication treatment-induced changes in cell membrane integrity enhanced and/or disrupted permeability of L. delbrueckii, resulting in an imbalance in intracellular conditions associated with corresponding alterations in metabolic behaviors and fermentation efficiencies. UT-prestressed inoculum exhibited a 21.46% decrease in the membrane potential during the lag phase compared to untreated samples, with an intracellular pH of 5.68 ± 0.12, attributed to the lower activities of H+-ATPase and lactate dehydrogenase due to UT stress pretreatments. Comparative transcriptomic analysis revealed that UT prestress influenced the genes related to glycolysis, pyruvate metabolism, fatty acid synthesis, and ABC transport. The genes encoding 3-oxoacyl-[acyl-carrier-protein] reductases I, II, and III, CoA carboxylase, lactate dehydrogenase, pyruvate oxidase, glucose-6-phosphate isomerase, and glycerol-3-phosphate dehydrogenase were downregulated, thus identifying the relevance of the UT microstresses-downregulated absorption and utilization of carbohydrates with the attenuated fatty acid production and energy metabolisms. These findings could contribute to provide a better understanding of the inactivated effects on the post-acidification of L. delbrueckii by ultrasonic pretreatments, thus providing theoretical basis for the targeted optimization of acidification inhibition efficiencies for yogurt products during chilled preservation processes.

Postbiotics-peptidoglycan, lipoteichoic acid, exopolysaccharides, surface layer protein and pili proteins-Structure, activity in wounds and their delivery systems

Chronic wound healing is a pressing global public health concern. Abuse and drug resistance of antibiotics are the key problems in the treatment of chronic wounds at present. Postbiotics are a novel promising strategy. Previous studies have reported that postbiotics have a wide range of biological activities including antimicrobial, immunomodulatory, antioxidant and anti-inflammatory abilities. However, several aspects related to these postbiotic activities remain unexplored or poorly known. Therefore, this work aims to outline general aspects and emerging trends in the use of postbiotics for wound healing, such as the production, characterization, biological activities and delivery strategies of postbiotics. In this review, a comprehensive overview of the physiological activities and structures of postbiotic biomolecules that contribute to wound healing is provided, such as peptidoglycan, lipoteichoic acid, bacteriocins, exopolysaccharides, surface layer proteins, pili proteins, and secretory proteins (p40 and p75 proteins). Considering the presence of readily degradable components in postbiotics, potential natural polymer delivery materials and delivery systems are emphasized, followed by the potential applications and commercialization prospects of postbiotics. These findings suggest that the treatment of chronic wounds with postbiotic ingredients will help provide new insights into wound healing and better guidance for the development of postbiotic products.

Combining thermosonication microstress and pineapple peel extract addition to achieve quality and post-acidification control in yogurt fermentation

This work investigated the effects of the combined use of thermosonication-preconditioned lactic acid bacteria (LAB) with the addition of ultrasound-assisted pineapple peel extracts (UU group) on the post-acidification potential, physicochemical and functional qualities of yogurt products, aimed at achieving prolonged preservation and enhancing functional attributes. Accordingly, the physical-chemical features, adhesion properties, and sensory profiles, acidification kinetics, the contents of major organic acids, and antioxidant activities of the differentially processed yogurts during refrigeration were characterized. Following a 14-day chilled storage process, UU group exhibited acidity levels of 0.5-2 oT lower than the control group and a higher lactose content of 0.07 mg/ml as well as unmodified adhesion potential, indicating that the proposed combination method efficiently inhibited post-acidification and delayed lactose metabolism without leading to significant impairment of the probiotic properties. The results of physicochemical analysis showed no significant changes in viscosity, hardness, and color of yogurt. Furthermore, the total phenolic content of UU-treated samples was 98 μg/mL, 1.78 times higher than that of the control, corresponding with the significantly lower IC50 values of DPPH and ABTS radical scavenging activities of the UU group than those of the control group. Observations by fluorescence inverted microscopy demonstrated the obvious adhesion phenomenon with no significant difference found among differentially prepared yogurts. The results of targeted metabolomics indicated the proposed combination strategy significantly modified the microbial metabolism, leading to the delayed utilization of lactose and the inhibited conversion into glucose during post-fermentation, as well as the decreased lactic acid production and a notable shift towards the formation of relatively weak acids such as succinic acid and citric acid. This study confirmed the feasibility of thermosonication-preconditioned LAB inocula, in combination with the use of natural active components from fruit processing byproducts, to alleviate post-acidification in yogurt and to enhance its antioxidant activities as well as simultaneously maintaining sensory features.

The MATH test. A three-phase assay?

This study aimed to investigating the possible interference caused by glass test tubes on the quantification of bacterial adhesion to hydrocarbons by the MATH test. The adhesion of four bacteria to hexadecane and to glass test tubes was evaluated employing different suspending polar phases. The role of the ionic strength of the polar phase regarding adhesion to glassware was investigated. Within the conditions studied, Gram-positive bacteria adhered to both the test tube and the hydrocarbon regardless of the polar phase employed; meanwhile, Escherichia coli ATCC 25922 did not attach to either one. The capacity of the studied microorganisms to adhere to glassware was associated with their electron-donor properties. The ionic strength of the suspending media altered the patterns of adhesion to glass in a strain-specific manner by defining the magnitude of electrostatic repulsion observed between bacteria and the glass surface. This research demonstrated that glass test tubes may interact with suspended bacterial cells during the MATH test under specific conditions, which may lead to overestimating the percentage of adhesion to hydrocarbons and, thus, to erroneous values of cell surface hydrophobicity.

Recent developments in ultrasound approach for preservation of animal origin foods

Ultrasound is a contemporary non-thermal technology that is currently being extensively evaluated for its potential to preserve highly perishable foods, while also contributing positively to the economy and environment. There has been a rise in the demand for food products that have undergone minimal processing or have been subjected to non-thermal techniques. Livestock-derived food products, such as meat, milk, eggs, and seafood, are widely recognized for their high nutritional value. These products are notably rich in proteins and quality fats, rendering them particularly vulnerable to oxidative and microbial spoilage. Ultrasound has exhibited significant antimicrobial properties, as well as the ability to deactivate enzymes and enhance mass transfer. The present review centers on the production and classification of ultrasound, as well as its recent implementation in the context of livestock-derived food products. The commercial applications, advantages, and limitations of the subject matter are also subject to scrutiny. The review indicated that ultrasound technology can be effectively utilized in food products derived from livestock, leading to favorable outcomes in terms of prolonging the shelf life of food while preserving its nutritional, functional, and sensory attributes. It is recommended that additional research be conducted to investigate the effects of ultrasound processing on nutrient bioavailability and extraction. The implementation of hurdle technology can effectively identify and mitigate the lower inactivation of certain microorganisms or vegetative cells.

Culture Age, Growth Medium, Ultrasound Amplitude, and Time of Exposure Influence the Kinetic Growth of Lactobacillus acidophilus

The growth pattern of probiotics can be modified by changing their nutritional factors and their physiological stage. Meanwhile, high intensity ultrasound (HIUS) can be employed to increase probiotics’ biomass. The one-factor-at-a-time (OFAT) approach was employed to investigate the influence of the growth medium (MRS broth, whole milk, and skim milk), culture age (1 day and 7 days old) and ultrasound parameters (time and amplitude) on the kinetic parameters of L. acidophilus. The oldest culture (7 days) had a greater lag phase and time to reach the end of the sigmoidal curve (Tmax) (p < 0.05) as well as a lower rate (maximum growth potential μmax) compared to the youngest culture (1 day). Regarding the growth medium, skim milk presented the greatest L. acidophilus counts (p < 0.05). Meanwhile, sonication times (60 and 90 s) change µmax and Tmax. When 30% amplitude was applied, a greater μmax and a smaller Tmax were observed (p < 0.05). It can be concluded that the growth medium, culture age, and ultrasound parameters (time and amplitude) influence the kinetic parameters of L. acidophilus. Results from this study could be used in the design and optimization of processes to improve the growth of the probiotic L. acidophilus at industrial scale.

Ultrasound Attenuation Improves Some Surface Properties of the Probiotic Strain Lacticaseibacillus casei ATCC 393

Ultrasound attenuation has been recently proposed as a tool to modulate probiotic metabolism. The study aimed to characterize the response of the probiotic Lacticaseibacillus casei ATCC 393 to sonication. Two ultrasound treatments were tested (57 W, duty cycle 50%, 6 or 8 min). Attenuation was assessed as a pH decrease in MRS broth after 6 and 24 h of incubation at 37 °C. Cultivability was evaluated by plate count immediately after sonication and by growth index on overnight cultures. Surface changes were determined by auto-aggregation, hydrophobicity, biofilm production tests, and by membrane damages. The 6 min treatment induced a temporary attenuation, while a prolongated exposure to sonic waves caused major attenuation effects (ΔpH 0.97 after 24 h). Both sonication treatments affected probiotic cultivability with a significant (p < 0.05) reduction of plate counts and an alteration of the growth index. Although auto-aggregation was negatively affected upon sonication, the hydrophobicity and biofilm production were improved with no significant differences (p > 0.05) between the sonicated samples. Moreover, sonicated L. casei ATCC 393 resulted in increased membrane permeability. These results suggest that ultrasound technology can be successfully used to modulate the L. casei ATCC 393 fermentative metabolism and to improve its surface properties.

Ultrasound can increase biofilm formation by Lactiplantibacillus plantarum and Bifidobacterium spp

The main goal of this research was to study the effect of an Ultrasound (US) treatment on biofilm formation of Lactiplantibacillus plantarum (strains c19 and DSM 1055), Bifidobacterium animalis subsp. lactis DSM 10140, Bifidobacterium longum subsp. longum DSM 20219, and Bifidobacterium longum subsp. infantis DSM 20088. From a methodological point of view, each microorganism was treated through six US treatments, different for the power (10, 30, or 50% of the net power, 130 W), the duration (2, 6, or 10 min) and the application of pulses (0 or 10 s). After the treatment, a biofilm of the strains was let to form on glass slides and the concentration of sessile cells was analyzed for 16 days. Biofilms formed by untreated microorganisms were used as controls. As a first result, it was found that US significantly increased the concentration of sessile cells of B. longum subsp. infantis, while for some other strains US treatment could not affect the formation of biofilm while improving its stability, as found for L. plantarum DSM1055 after 16 days. The variable mainly involved in this positive effect of US was the duration of the treatment, as biofilm formation and stability were improved only for 2 min-treatments; on the other hand, the effect of power and pulses were strain-dependent. In conclusion, the results suggest practical implication of a US pre-treatment for various fields (improvement of adhesion of microorganisms useful in food or in the gut, biomedical and environmental industries), although further investigations are required to elucidate the mode of action.

Improvement of the Lyophilization Survival Rate of Lactobacillus casei via Regulation of Its Surface Substances

The influence of surface substance production on the freeze-drying survival of Lactobacillus casei and methods to control the surface substances during fermentation were studied. The bacteria were treated with hypertonicity combined with ultrasound, and the survival rate was determined. The optimal conditions for removing surface substance without harming the bacteria were 81 w/18 min. The surface substances provided a protective effect on the lyophilization of the bacteria without protectants. However, in the presence of protectants, excessive surface substances reduced the protective effect of the optimum protectant alginate to 39.69 ± 1.27%. Finally, the amount of surface substances and lyophilized survival rate of collected bacteria were determined by adding EDTA during fermentation and regulating fermentation conditions, such as the carbon source, carbon-to-nitrogen ratio, and pH. The highest survival rate was 85.79 ± 3.29%, which was achieved when the amount of surface substances was (2.82 ± 0.55) × 10−11 mg/CFU. Therefore, the production of surface substances by the bacteria could be reduced by modifying the fermentation stage, which has significance in the improvement of the lyophilization survival rate of L. casei and the number of live bacteria per unit mass of L. casei in the lyophilized preparation.

Application of ultrasound and microencapsulation on Limosilactobacillus reuteri DSM 17938 as a metabolic attenuation strategy for tomato juice probiotication

Counteracting probiotic-induced physicochemical and sensory changes is a challenge in the development of probiotic beverages. The aim of the study is to apply ultrasound and microencapsulation for the attenuation of Limosilactobacillus reuteri DSM 17938 to avoid change in a probiotic tomato juice. Preliminarily, six ultrasound treatments were applied. Probiotic survival in acid environment (pH 2.5) and bile salts (1.5 g/l) after ultrasound treatment was also studied. The probiotic was inoculated in tomato juice in four forms: free cells (PRO-TJ), sonicated-free cells (US-TJ), untreated-microencapsulated (PRO-MC-TJ) and sonicated-microencapsulated cells (US-MC-TJ). Probiotic viability and pH were monitored during 28 days of storage at 4 and 20 °C. Sensory analysis was performed for PRO-TJ and US-MC-TJ sample (4 °C). Ultrasound (57 W for 6 min) did not affect cell survival and transitorily modulated probiotic acidifying capacity; it reduced probiotic survival in acidic environment but increased probiotic survival in bile salts solution. Ultrasound was effective in maintain pH value of tomato juice but only at 4 °C. Instead, microencapsulation with sodium-alginate leads to a more stable probiotic juice, particularly at 20 °C. Finally, probiotication slightly modified some sensory attributes of the juice. This study shows the potential of ultrasound and microencapsulation as attenuation strategies and highlights the need for process optimization to increase ultrasound efficacy.

Strategic thermosonication-mediated modulation of lactic acid bacteria acidification kinetics for enhanced (post)-fermentation performance

This study explored the feasibility of thermosonication (TS)-prestressed inoculum with different fermentation patterns for regulating microbial (post)-fermentation acidification kinetics. Through a Box-Behnken design, stimulative (20 min, 400 W, 33 kHz, 25 °C) and inhibitive (10 min, 600 W, 33 kHz, 20 °C) effects on the acidification capability of Lactobacillus plantarum A3 were achieved without observing greatly activated/inactivated strains growth, further confirmed by lactose fermentation performed by Streptococcus thermophilus and Lactobacillus bulgaricus. Lactic acid was the major contributing factor responsible for TS-induced acidification modifications corresponding to the potential fluctuations of CoA biosynthesis, fatty acid degradation and chain elongation pathways to TS prestress. Microscopy observations and quantitative extracellular substance assays showed palpable stress disturbance on microbes, but causing insignificant effects on product characteristics. This investigation demonstrated the potential of controlled sonication prestress strategies to achieve dual engineering effects on microbial metabolic behavior, for alleviating post-acidification problem or enhancing process efficiencies.

The future of functional food: Emerging technologies application on prebiotics, probiotics and postbiotics

This review was the first to gather literature about the effect of emerging technologies on probiotic, prebiotic, and postbiotic products. Applying emerging technologies to probiotic products can increase probiotic survival and improve probiotic properties (cholesterol attachment, adhesion to Caco-2 cells, increase angiotensin-converting enzyme (ACE) inhibitory, antioxidant, and antimicrobial activities, and decrease systolic blood pressure). Furthermore, it can optimize the fermentation process, produce or maintain compounds of interest (bacteriocin, oligosaccharides, peptides, phenolic compounds, flavonoids), improve bioactivity (vitamin, aglycones, calcium), and sensory characteristics. Applying emerging technologies to prebiotic products did not result in prebiotic degradation. Still, it contributed to higher concentrations of bioactive compounds (citric and ascorbic acids, anthocyanin, polyphenols, flavonoids) and health properties (antioxidant activity and inhibition of ACE, α-amylase, and α-glucosidase). Emerging technologies may also be applied to obtain postbiotics with increased health effects. In this way, current studies suggest that emerging food processing technologies enhance the efficiency of probiotics and prebiotics in food. The information provided may help food industries to choose a more suitable technology to process their products and provide a basis for the most used process parameters. Furthermore, the current gaps are discussed. Emerging technologies may be used to process food products resulting in increased probiotic functionality, prebiotic stability, and higher concentrations of bioactive compounds. In addition, they can be used to obtain postbiotic products with improved health effects compared to the conventional heat treatment.

Advancements in the Use of Fermented Fruit Juices by Lactic Acid Bacteria as Functional Foods: Prospects and Challenges of Lactiplantibacillus (Lpb.) plantarum subsp. plantarum Application

Lactic acid fermentation of fresh fruit juices is a low-cost and sustainable process, that aims to preserve and even enhance the organoleptic and nutritional features of the raw matrices and extend their shelf life. Selected Lactic Acid Bacteria (LAB) were evaluated in the fermentation of various fruit juices, leading in some cases to fruit beverages, with enhanced nutritional and sensorial characteristics. Among LAB, Lactiplantibacillus (Lpb.) plantarum subsp. plantarum strains are quite interesting, regarding their application in the fermentation of a broad range of plant-derived substrates, such as vegetables and fruit juices, since they have genome plasticity and high versatility and flexibility. L. plantarum exhibits a remarkable portfolio of enzymes that make it very important and multi-functional in fruit juice fermentations. Therefore, L. plantarum has the potential for the production of various bioactive compounds, which enhance the nutritional value and the shelf life of the final product. In addition, L. plantarum can positively modify the flavor of fruit juices, leading to higher content of desirable volatile compounds. All these features are sought in the frame of this review, aiming at the potential and challenges of L. plantarum applications in the fermentation of fruit juices.

Current Advances on the Development and Application of Probiotic-Loaded Edible Films and Coatings for the Bioprotection of Fresh and Minimally Processed Fruit and Vegetables

The application of probiotics has emerged as an innovative bioprotection technology to preserve fresh and minimally processed fruit and vegetables. This review discusses the most recent advances on the development and application of probiotic-loaded edible films/coatings as a strategy to preserve fresh or minimally processed fruit and vegetables. Available studies have shown a variety of materials, including hydrocolloids (polysaccharides and proteins) and lipids, used alone or in combination to formulate edible films/coatings loaded with probiotics. Plasticizers and surfactants are usually required to formulate these edible films/coatings. The reported antimicrobial effects of probiotic-loaded edible films/coating and quality parameters of coated fruit and vegetables could vary according to the characteristics of the materials used in their formulation, loaded probiotic strain and its dose. The antimicrobial effects of these films/coatings could be linked to the action of various metabolites produced by embedded probiotic cells with inhibitory effects on microorganisms contaminating fruit and vegetable surfaces. The implication of the use of probiotic-loaded edible films/coatings should be their antimicrobial effects against pathogenic and spoilage microorganisms and efficacy to control the ripening of fruit and vegetables, helping the coated products to maintain their safety, quality, nutritional and functional characteristics for a more prolonged storage period.

Increase of acidification of synthetic brines by ultrasound-treated Lactiplantibacillus plantarum strains isolated from olives

This paper focused on the evaluation of Ultrasound effect on the growth patterns (3-6% of salt and 45 °C), acidification (pH-decrease), interactions with microorganisms, and membrane permeability of nine strains of Lactiplantibacillus plantarum. Ultrasound treatment was applied at 20% of net power by modulating duration (2-10 min) and pulses (2-10 s). Viable count (7.15-8.16 log CFU/mL) was never affected by Ultrasound, while the treatment increased the extent of pH decrease of at least three strains (109, 162 and c19). L. plantarum c19 was the best performer, as a low intensity treatment was able to increase its acidification, without affecting its growth. The effects could be attributed to an increased permeability of the cellular membrane, as suggested by the increase of released intracellular components. Other factors should be further assessed (e.g. possible changes in the metabolism) and the performances of Ultrasound-treated strains in real brines.

Method-induced variation in the bacterial cell surface hydrophobicity MATH test

Bacterial cell surface hydrophobicity is a relevant property in determining the ability of bacteria to adhere to inert surfaces. This property has been measured using the microbial adhesion to hydrocarbon (MATH) test. Several reports in the literature establish the percentage of adhesion to hydrocarbons (PoAtH) value produced by the MATH test for a broad variety of bacteria. Discrepancies in PoAtH values reported for the same strain of a specific microorganism suggest that some method-induced variation may exist, as different research teams employ different versions of the assay. The objective of the present study was to compare the performance of different versions of the MATH test as reported in the literature, to quantify the magnitude of the method-induced variation on PoAtH values. The study demonstrated that PoAtH values are influenced twice as much by variations in the employed assay than by actual differences in cell surface composition or architecture. The two L. reuteri strains studied responded differently to changes in assay conditions showing 40 and 70% method-dependent variation for strain ATCC 53609 and 55730, respectively. These results highlight the need to properly standardize the MATH test to enable comparison of PoAtH values produced by independent research teams.

Arthrospira platensis Extract: A Non-Invasive Strategy to Obtain Adjunct Attenuated Cultures

This study aims at proposing the use of Arthrospira platensis, commonly known as Spirulina, extract as a non-invasive method to attenuate the growth rate of non-starter adjunct cultures, thus preventing the over-acidification that may occur during cheese manufacturing. A preliminary screening using four different concentrations (0.20%, 0.30%, 0.50%, and 0.70%) of A. platensis extract and four starter and three non-starter lactic acid bacteria strains was performed by impedometric analysis. This allowed us to select one starter and one non-starter strain to be used in the in vitro simulation of a co-culture in milk with the best antimicrobial concentration (0.3%). The growth dynamics of the two selected strains, starter Lactococcus lactis 1426 and non-sarter Lacticaseibacillus rhamnosus 1473, co-cultured for 120 h was monitored by three different approaches: (i) plate counting on M17, for the enumeration of lactococci, and MRS for lactobacilli; (ii) fluorescence microscopic counting of viable and non-viable coccoid Lactococcus lactis 1426 and rod-shaped Lacticaseibacillus rhamnosus 1473 cells; (iii) the overall estimation of co-culture growth behavior by impedometric parameters Lag, Rate, and yEnd. All the data obtained from the in vitro simulation were in agreement, revealing that a slowdown of non-starter growth occurred, while the starter strain was not affected, or slightly stimulated, from the antimicrobial presence. In particular, the growth of Lb. rhamnosus 1473 was delayed without adversely compromise the cells' integrity, connected with metabolic functions, showing a great potential for use in cheese production.

Alginate- and Gelatin-Coated Apple Pieces as Carriers for Bifidobacterium animalis subsp. lactis DSM 10140

Fruit and vegetables are considered good natural supports for microorganisms; however, probiotics could cause negative changes on some organoleptic and sensory traits. Thus, the main topic of this paper was the design of coated apple chips as carriers for probiotics with a high level of sensory traits. The research was divided into two steps. First, four functional strains (Limosilactobacillus reuteri DSM 20016, Bifidobacterium animalis subsp. lactis DSM 10140, and Lactiplantibacillus plantarum c16 and c19) were immobilized on apple pieces through dipping of fruit chips in probiotic suspensions for different contact times (from 15 to 30 min) and stored at 4°C for 12 days. Periodically, the viable count was assessed. As a result of this step, a contact time of 15 min was chosen because it assured an optimal deposition of microorganisms. In the second step, apple pieces inoculated with B. animalis subsp. lactis DSM 10140 were coated with alginate and gelatin and stored at 4 and 8°C for 10 days; pH, microbiological counts, color (browning index), and sensory scores were evaluated. Bifidobacterium animalis DSM 10140 exerted a negative effect on apple chips and cause a significant browning; however, the use of coating counteracted this phenomenon. In fact, coated chips showed higher sensory scores and lower browning index. In addition, gelatin showed better performances in terms of probiotic viability, because at 8°C, a significant viability loss of B. animalis DSM 10140 (1.2 log cfu/g) was found on alginate-coated chips. Gelatin-coated apple pieces with B. animalis subsp. lactis DSM 10140 could be an attractive functional food for a wide audience, although further investigations are required on in vivo effects of this product after consumption.

Ultrasonic Modulation of the Technological and Functional Properties of Yeast Strains

This research was aimed at studying the effects of low intensity ultrasound (US) on some technological and functional properties of eight strains of Saccharomyces cerevisiae; namely, growth patterns (growth at 2–5% of NaCl or at 37 °C), autoaggregation and tolerance to simulated gastrointestinal conditions were evaluated. A US treatment was applied at 20% of net power (130 W) by a modulating duration (2–10 min) and pulses (2–10 s). The viable count (4.81–6.33 log CFU/mL) was not affected by US, while in terms of technological traits the effect was strain specific; in particular, for some strains a positive effect of US was found with a significant growth enhancement (growth index > 120%). The treatment was also able to increase the autoaggregation of some strains, thus suggesting that US could represent a promising way to treat and select nonconventional functional yeasts for food applications.

Ultrasound-Attenuated Microorganisms Inoculated in Vegetable Beverages: Effect of Strains, Temperature, Ultrasound and Storage Conditions on the Performances of the Treatment

Four microorganisms (Lactobacillus acidophilus LA5, Bifidobacterium animalis subsp. lactis DSM 10140 and Lactiplantibacillus plantarum c16 and c19) were attenuated through ultrasound (US) treatments (40% of power for 2, 4 and 6 min; and 60% for 2 min; pulses were set at 2 s) inoculated in rice–oats–almond–soy-based beverages and stored at 4 °C for eight days. All strains were able to survive throughout the storage independently by the food matrix. Concerning the effect on acidification, the results were analyzed through multifactorial analysis of variance (MANOVA) and the key-findings of this were: (i) The treatment with 40% of power for 6 min was the most efficient at delaying acidification; (ii) Lb. acidophilus LA5 showed the best capacity to delay acidification; (iii) in the soy-based beverage a lower acidification was found. In a second step, L. plantarum c16 and c19 were attenuated, inoculated in rice beverage, stored under a thermal abuse (for 4 and 24 h) and then at 4, 15 and 20 °C. The results showed that only when US were combined with refrigeration temperatures were they efficient at delaying acidification. Thus, a perspective for attenuation could be the optimization of the treatment to design an effective way to counteract acidification also under a thermal abuse.

The Inoculation of Probiotics In Vivo Is a Challenge: Strategies to Improve Their Survival, to Avoid Unpleasant Changes, or to Enhance Their Performances in Beverages

The inoculation of probiotics in beverages (probiotication) requires special technologies, as probiotic microorganisms can experience stress during food processing (acid, cold, drying, starvation, oxidative, and osmotic stresses) and gastrointestinal transit. Survival to harsh conditions is an essential prerequisite for probiotic bacteria before reaching the target site where they can exert their health promoting effects, but several probiotics show a poor resistance to technological processes, limiting their use to a restricted number of food products. Therefore, this paper offers a short overview of the ways to improve bacterial resistance: by inducing a phenotypic modification (adaptation) or by surrounding bacteria through a physical protection (microencapsulation). A second topic briefly addressed is genetic manipulation, while the last section addresses the control of metabolism by attenuation through physical treatments to design new kinds of food.

Numerical modeling and verification of a sonobioreactor and its application on two model microorganisms

Ultrasound has many uses, such as in medical imaging, monitoring of crystallization, characterization of emulsions and suspensions, and disruption of cell membranes in the food industry. It can also affect microbial cells by promoting or slowing their growth and increasing the production of some metabolites. However, the exact mechanism explaining the effect of ultrasound has not been identified yet. Most equipment employed to study the effect of ultrasound on microorganisms has been designed for other applications and then only slightly modified. This results in limited control over ultrasound frequency and input power, or pressure distribution in the reactor. The present study aimed to obtain a well-defined reactor by simulating the pressure distribution of a sonobioreactor. Specifically, we optimized a sonotrode to match the bottle frequency and compared it to measured results to verify the accuracy of the simulation. The measured pressure distribution spectrum presented the same overall trend as the simulated spectrum. However, the peaks were much less intense, likely due to non-linear events such as the collapse of cavitation bubbles. To test the application of the sonobioreactor in biological systems, two biotechnologically interesting microorganisms were assessed: an electroactive bacterium, Geobacter sulfurreducens, and a lignocellulose-degrading fungus, Fusarium oxysporum. Sonication resulted in increased malate production by G. sulfurreducens, but no major effect on growth. In comparison, morphology and growth of F. oxysporum were more sensitive to ultrasound intensity. Despite considerable morphological changes at 4 W input power, the growth rate was not adversely affected; however, at 12 W, growth was nearly halted. The above findings indicate that the novel sonobioreactor provides an effective tool for studying the impact of ultrasound on microorganisms.

Two Nonthermal Technologies for Food Safety and Quality-Ultrasound and High Pressure Homogenization: Effects on Microorganisms, Advances, and Possibilities: A Review

Some nonthermal technologies have gained special interest as alternative approaches to thermal treatments. High pressure homogenization (HPH) and ultrasound (US) are two of the most promising approaches. They rely upon two different modes of action, although they share some mechanisms or ways of actions (mechanic burden against cells, cavitation and micronization, primary targets being the cell wall and the membrane, temperature and pressure playing important roles for their antimicrobial potential, and their effect on cells can be either positive or negative). HPH is generally used in milk and dairy products to break lipid micelles, whereas US is used for mixing and/or to obtain active compounds of food. HPH and US have been tested on pathogens and spoilers with different effects; thus, the main goal of this article is to describe how US and HPH act on biological systems, with a focus on antimicrobial activity, mode of action, positive effects, and equipment. The article is composed of three main parts: (i) an overview of US and HPH, with a focus on some results covered by other reviews (mode of action toward microorganisms and effect on enzymes) and some new data (positive effect and modulation of metabolism); (ii) a tentative approach for a comparative resistance of microorganisms; and (iii) future perspectives.

High-intensity ultrasound: A novel technology for the development of probiotic and prebiotic dairy products

High-intensity ultrasound (HIUS) can be used as a mild-preservation technology in dairy products, due to its ability to inactivate pathogenic microorganisms and enzymes. In addition, it can result in physical and chemical alterations in the products and has impact on the probiotic viability and metabolic activity. This review provides an overview of the effects of HIUS on dairy products manufactured with probiotics and prebiotics. Furthermore, it presents perspectives of HIUS application on paraprobiotics and postbiotics products. HIUS has been proven to be a potential technology and its application to fermented dairy products can result in shorter processing time, increased probiotic viability, and products with low lactose content, higher oligosaccharides concentration, less undesirable taste (lower propionic and acetic acids content) and reduced ingredients (no need of prebiotic addition or β-galactosidase inclusion). In cheeses, HIUS can reduce the ripening time and accelerate proteolysis, resulting in products with better sensory, textural and nutritional (bioactive peptides) characteristics. Furthermore, it can change the prebiotic structure, facilitating the access for the probiotics. The impact of the HIUS is highly dependent on the process parameters (frequency, power, processing time, pulse mode and duration), type of probiotic culture and food composition. Therefore, HIUS process parameters must be precisely quantified and controlled. The HIUS can also be applied to the inactivation of probiotic cultures and development of paraprobiotic products or to the improvement in the production of soluble factors (postbiotics) with health effects. Further researches should be conducted to evaluate the efficiency of this methodology in the cases of paraprobiotic and postbiotic products.

Review: Adaptation of Beneficial Propionibacteria, Lactobacilli, and Bifidobacteria Improves Tolerance Toward Technological and Digestive Stresses

This review deals with beneficial bacteria, with a focus on lactobacilli, propionibacteria, and bifidobacteria. As being recognized as beneficial bacteria, they are consumed as probiotics in various food products. Some may also be used as starters in food fermentation. In either case, these bacteria may be exposed to various environmental stresses during industrial production steps, including drying and storage, and during the digestion process. In accordance with their adaptation to harsh environmental conditions, they possess adaptation mechanisms, which can be induced by pretreatments. Adaptive mechanisms include accumulation of compatible solutes and of energy storage compounds, which can be largely modulated by the culture conditions. They also include the regulation of energy production pathways, as well as the modulation of the cell envelop, i.e., membrane, cell wall, surface layers, and exopolysaccharides. They finally lead to the overexpression of molecular chaperones and of stress-responsive proteases. Triggering these adaptive mechanisms can improve the resistance of beneficial bacteria toward technological and digestive stresses. This opens new perspectives for the improvement of industrial processes efficiency with regard to the survival of beneficial bacteria. However, this bibliographical survey evidenced that adaptive responses are strain-dependent, so that growth and adaptation should be optimized case-by-case.

Viability of Lactobacillus plantarum on Fresh-Cut Chitosan and Alginate-Coated Apple and Melon Pieces

There is an increasing trend toward foods with probiotics; the awareness of healthy diet and wellbeing is the leading cause of this increase. As a result, food producers and stakeholders require new probiotic products. The increased incidence of lactose intolerance and the new lifestyles (vegan and vegetarian styles) have led to a renewed interest in non-dairy probiotic carriers. The use of biopolymeric matrices to develop active food packaging carrying probiotics has been studied and proposed as an alternative method to design new solutions. The main topic of this paper was the design of fresh-cut fruits (apples and melons) as carriers for a promising Lactobacillus plantarum; fruit pieces were coated with either alginate or chitosan. Apple (Granny Smith) and melon pieces (Cucumis melo, var. Cantalupensis) were preliminary treated with an anti-browning solution (citric and ascorbic acids). Then, fruit pieces were dipped in a solution containing L. plantarum c19 (9 log cfu/ml) and coated with alginate or chitosan. Samples without probiotic and/or coatings were used as controls. All samples were stored at 4°C for 14 days under air or modified atmosphere (65% N2, 30% CO2, and 5% O2); the following analyses were done: pH, color, O2, and CO2 in the head space, microbiology (mesophilic bacteria, lactic acid bacteria, yeasts, and molds). The most important results can be summarized as follows: (a) Alginate coating showed better performances than chitosan-coating, as it did not affect the viability of L. plantarum. (b) The inoculation of probiotics in the controls negatively affected the color, but the coating was able to counteract this effect. This paper supports the combination of edible coatings and probiotic as a promising way to design new fruit-based functional foods; further investigations are required to study the effect of this combination on the sensory scores.