Strain induced in the condyle by self-tapping screws in the Biomet alloplastic temporomandibular joint: a preliminary experimental study

Biomechanical Evaluation of Temporomandibular Joint Reconstruction Using Individual TMJ Prosthesis Combined with a Fibular Free Flap in a Pediatric Patient

The main aim of this study was to perform a complex biomechanical analysis for a custom-designed temporomandibular joint (TMJ) prosthesis in combination with a fibular free flap in a pediatric case. Numerical simulations in seven variants of loads were carried out on 3D models obtained based on CT images of a 15-year-old patient in whom it was necessary to reconstruct the temporal-mandibular joints with the use of a fibula autograft. The implant model was designed based on the patient's geometry. Experimental tests on a manufactured personalized implant were carried out on the MTS Insight testing machine. Two methods of fixing the implant to the bone were analyzed-using three or five bone screws. The greatest stress was located on the top of the head of the prosthesis. The stress on the prosthesis with the five-screw configuration was lower than in the prosthesis with the three-screw configuration. The peak load analysis shows that the samples with the five-screw configuration have a lower deviation (10.88, 0.97, and 32.80%) than the groups with the three-screw configuration (57.89 and 41.10%). However, in the group with the five-screw configuration, the fixation stiffness was relatively lower (a higher value of peak load by displacement of 171.78 and 86.46 N/mm) than in the group with the three-screw configuration (where the peak load by displacement was 52.93, 60.06, and 78.92 N/mm). Based on the experimental and numerical studies performed, it could be stated that the screw configuration is crucial for biomechanical analysis. The results obtained may be an indication for surgeons, especially during planning personalized reconstruction procedures.

Influences of geometrical and mechanical properties of bone tissues in mandible behaviour - experimental and numerical predictions

The properties and geometry of bone in the mandible play a key role in mandible behaviour during a person's lifetime, and attention needs to be paid to the influence of bone properties. We analysed the effect of bone geometry, size and bone properties in mandible behaviour, experimenting on cadaveric mandibles and FE models. The study was developed using the geometry of a cadaveric mandible without teeth. Three models of cadaveric condyles were experimentally tested with instrumented with four rosettes, and a condyle reaction of 300 N. Four finite element models were considered to validate the experiments and analyse mandible behaviour. One numeric model was simulated with 10 muscles in a quasi-static condition. The experimental results present different condyle stiffness's, of 448, 215 and 254 N/mm. The values presented in the rosettes are influenced by bone geometry and bone thickness; maximum value was -600 με in rosette #4, and the maximum strain difference between mandibles was 111%. The numerical results show that bone density decreases and strain distribution increases in the thinner mandible regions. Nevertheless, the global behaviour of the structure remains similar, but presents different strain magnitudes. The study shows the need to take into account bone characteristics and their evolutions in order to improve implant design and fixation throughout the patient life. The change in bone stiffness promotes a change in maximum strain distribution with same global behaviour.