Influence of poloxamers on the dissolution performance and stability of controlled-release formulations containing Precirol ATO 5

Quality by design driven development of lipid nanoparticles for cutaneous targeting: a preliminary approach

Fungal infections are the fourth common cause of infection affecting around 50 million populations across the globe. Dermatophytes contribute to the majority of superficial fungal infections. Clotrimazole (CTZ), an imidazole derivative is widely preferred for the treatment of topical fungal infections. Conventional topical formulations enable effective penetration of CTZ into the stratum corneum, however, its low solubility results in poor dermal bioavailability, and variable drug levels limit the efficacy. The aim was to increase dermal bioavailability and sustain drug release, thereby potentially enhancing drug retention and reducing its side effects. This work evaluated the CTZ loaded solid lipid nanoparticles (SLN) consisting of precirol and polysorbate-80 developed using high pressure homogenization and optimized with QbD approach. Prior to release studies, CTZ-SLNs were characterized by different analytical techniques. The laser diffractometry and field emission scanning electron microscopy indicated that SLNs were spherical in shape with mean diameter of 450 ± 3.45 nm. DSC and XRD results revealed that the drug remained molecularly dispersed in the lipid matrix. The CTZ-SLNs showed no physicochemical instability during 6 months of storage at different temperatures. Further, the Carbopol with its pseudoplastic behavior showed a crucial role in forming homogenous and stable network for imbibing the CTZ-SLN dispersion for effective retention in skin. As examined, in-vitro drug release was sustained up to 24 h while ex-vivo skin retention and drug permeation studies showed the highest accumulation and lowest permeation with nanogel in comparison to pure drug and Candid® cream. Further, the in-vivo antifungal efficacy of nanogel suggested once-a-day application for 10 days, supported by histopathological analysis for complete eradication infection. In summary, the findings suggest, that nanogel-loaded with CTZ-SLNs has great potential for the management of fungal infections caused by Candida albicans.

Levofloxacin in nanostructured lipid carriers: Preformulation and critical process parameters for a highly incorporated formulation

The first step of a successful nanoformulation development is preformulation studies, in which the best excipients, drug-excipient compatibility and interactions can be identified. During the formulation, the critical process parameters and their impact must be studied to establish the stable system with a high drug entrapment efficiency (EE). This work followed these steps to develop nanostructured lipid carriers (NLCs) to deliver the antibiotic levofloxacin (LV). The preformulation studies covered drug solubility in excipients and thorough characterization using thermal analysis, X-ray diffraction and spectroscopy. A design of experiment based on the process parameters identified nanoparticles with < 200 nm in size, polydispersity <= 0.3, zeta potential -21 to -24 mV, high EE formulations (>71 %) and an acceptable level of LV degradation products (0.37-1.13 %). To the best of our knowledge, this is the first time that a drug degradation is reported and studied in work on nanostructured lipids. LV impurities following the NLC production were detected, mainly levofloxacin N-oxide, a degradation product that has no antimicrobial activity and could interfere with LV quantification in spectrophotometric experiments. Also, the achievement of the highest EE in lipid nanoparticles than those described in the literature to date and the apparent protective action of NLC of entrapped-LV against degradation are important findings.

Hijacking the intrinsic vitamin B12 pathway for the oral delivery of nanoparticles, resulting in enhanced in vivo anti-leishmanial activity

Surface-functionalized vitamin B₁₂ (VB₁₂) biocompatible nanoparticles exploit the well-characterized uptake pathway of VB₁₂, shielding it from enzymatic degradation and inadequate absorption. In this perspective, subsequent to escalated mucus interaction and diffusion analysis, the nanoparticles were investigated by immunostaining with the anti-CD320 antibody, and their internalization mechanisms were examined by selectively blocking specific uptake processes. It was observed that their internalization occurred via an energy-dependent clathrin-mediated mechanism, simultaneously highlighting their remarkable ability to bypass the P-glycoprotein efflux. In particular, the synthesized nanoparticles were evaluated for their cytocompatibility by analyzing cellular proliferation, membrane viscoelasticity, and fluidity by fluorescence recovery after photobleaching and oxidative-stress detection, making them well-suited for successful translation to a clinical setup. Our previous in vitro antileishmanial results were paramount for their further in vivo and toxicity analysis, demonstrating their targeted therapeutic efficiency. The augmented surface hydrophilicity, which is attributed to VB₁₂, and monomerization of amphotericin B in the lipid core strengthened the oral bioavailability and stability of the nanoparticles, as evidenced by the fluorescence resonance energy transfer analysis.

Stereomicroscope with Imaging Analysis: A Versatile Tool for Wetting, Gel Formation and Erosion Rate Determinations of Eutectic Effervescent Tablet

Wettability, gel formation and erosion behaviors could influence the drug release pattern of solid dosage forms. Typically, these parameters are evaluated using a variety of techniques. Nonetheless, there has been no previous research on versatile tool development for evaluating several tablet characteristics with a single tool. The aim of this study was to develop the versatile tool for measuring various physical properties of eutectic effervescent tablets and also investigate the relationship between these parameters with parameters from drug dissolution. Ibuprofen (IBU)-poloxamer 407 (P407) eutectic effervescent tablets were fabricated with a direct compression method. Their wetting properties, gel formation and erosion behaviors were investigated using a stereomicroscope with imaging analysis in terms of the liquid penetration distance, gel thickness and erosion boundary diameter, respectively. In addition, the dissolution rate (k) and disintegration time of eutectic effervescent tablets in 0.1 N HCl buffer pH 1.2 were also determined. Incorporation of P407 into the IBU tablet improved the tablet wetting properties with increasing liquid penetration distance under stereoscope. CO₂ liberation from effervescent agents promoted tablet surface roughness from matrix erosion. The relationship between observed physical properties and disintegration and dissolution parameters suggested that the combination of erosion by effervescent agents and gel formation by P407 had a potential influence on dissolution enhancement of the formulation. Therefore, a developed stereomicroscope with an imaging analysis technique was exhibited as an alternative versatile tool for determining the wetting properties, gel formation and erosion behaviors of pharmaceutical solid dosage forms.

Development of the Binary and Ternary Atorvastatin Solid Dispersions: In Vitro and In Vivo Investigations

The object of this study was to prepare binary and ternary solid dispersions of atorvastatin (ATR) by the melting method using PEGs and poloxamer 188 (P188) as the carriers, singly and in combination with each other. Dissolution behavior, solubility studies, X-ray diffractometry, differential scanning calorimetry, and Fourier transform infrared spectroscopy were studied. Furthermore, antihyperlipidemic activities of formulations were compared to each other by serum lipid analyses in hyperlipidemic rats. Based on the results, the highest dissolution efficiency (DE30 = 83%) was obtained by binary systems consisted of ATR and P188. Also, no additional improvement was observed in dissolution properties of ternary solid dispersion formulations. Solubility studies showed enhancement of ATR phase solubility in water and a buffer solution containing P188 or PEG 10000. Furthermore, saturated solubility of ATR in the buffer solution improved more than twofold in the optimized ternary dispersion system. No crystalline changes occurred in PEG-based formulations; meanwhile, partial amorphization happened in the ATR-P188 combination. Finally, the in vivo study in hyperlipidemic rats exhibited a rapid decrease in the lipid profile of all formulations compared to ATR (after 7 days). Moreover, reduction of serum triglycerides and total cholesterol on the 14th day in the ATR group (p value < 0.01) was less than solid dispersion or physical mixing preparations (p value < 0.001). These findings proved the appropriate influence of using PEG and P188 in solid dispersion systems for the improvement of the therapeutic efficiency of ATR.

Exploring micellar-based polymeric systems for effective nose-to-brain drug delivery as potential neurotherapeutics

Non-invasive nose-to-brain delivery presents a competitive strategy for effective drug targeting. This strategy can potentially evade the blood-brain barrier (BBB) depending on the pathway the drug and/or drug/micelle composite travels, thereby allowing direct drug delivery to the brain. This delivery strategy was employed for lurasidone, a clinically USFDA-approved neurotherapeutic molecule in bipolar disorders and schizophrenia treatments. The aim of this study was to develop mixed polymeric micelles of lurasidone HCl (LH) for targeted brain delivery via intranasal route. Lurasidone HCl-loaded mixed micelles (LHMM) were prepared by solvent evaporation method and optimized by 3² factorial design to quantify the effects of excipients on micelle size and entrapment efficiency. Fourier transform infrared spectroscopy helped in scrutinizing drug-excipient interactions whereas transmission electron microscopy images showed particle size and shape. Further, LHMM and LHMM hydrogel were evaluated for in vitro diffusion, histopathology, ex vivo permeation, in vivo pharmacokinetics and stability studies. Optimized LHMM exhibited 175 nm particle size and 97.8% entrapment efficiency with improved in vitro drug diffusion (81%). LHMM hydrogel showed 79% ex vivo drug permeation without any significant signs of nasociliary toxicity to sheep nasal mucosa. Single dose in vivo pharmacokinetic studies showed improved therapeutic concentration of drug in the brain post intranasal administration with 9.5 ± 0.21 μg/mL C_max and T_1/2 of 19.1 ± 0.08 h as compared to pure drug. LHMM, when administered by intranasal route, demonstrated significant increase in the drug targeting efficiency as well as potential (%DTE and %DTP) of drug as compared to pure lurasidone. Thus, nanosized mixed micelles were useful in effective brain delivery of lurasidone HCl via intranasal route. Graphical abstract.

Development and In Vitro Evaluation of Controlled Release Viagra® Containing Poloxamer-188 Using Gastroplus™ PBPK Modeling Software for In Vivo Predictions and Pharmacokinetic Assessments

Sildenafil is the active substance in Viagra^® tablets, which is approved by the FDA to treat sexual dysfunction in men. Poor solubility and short half-life, however, can limit the span of its effectiveness. Therefore, this study focused on an oral controlled release matrix system with the aim to improve solubility, control the drug release, and sustain the duration of drug activity. The controlled release matrices were prepared with poloxamer-188, hydroxypropyl methylcellulose, and magnesium stearate. Various formulations of different ratios were developed, evaluated in vitro, and assessed in silico. Poloxamer-188 appeared to have a remarkable influence on the release profile of sildenafil citrate. In general, the rate of drug release decreased as the amount of polymer was gradually increased in the matrix system, achieving a maximum release period over 12 h. The in silico assessment by using the GastroPlus™ PBPK modeling software predicted a significant variation in C_max, t_max, t_1/2, and AUC_0-t among the formulations. In conclusion, the combination of polymers in matrix systems can have substantial impact on controlling and modifying the drug release pattern.

3D-printed tablets using a single-step hot-melt pneumatic process for poorly soluble drugs

Main purpose was to evaluate the applicability of a 3D-printer equipped with a hot-melt pneumatic dispenser as a single-step process to prepare tablet dosage forms. Dutasteride, a poorly water-soluble drug, was selected as a model drug. Soluplus®, Kollidon® VA 64, Eudragit® E PO, and hydroxypropyl cellulose (HPC) were premixed as bulking agents prior to printing. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and thermogravimetric analysis (TGA) were utilized to evaluate the physicochemical properties of the 3D-printed tablets. Moreover, different geometries were designed to correlate the surface area/volume (SA/V) of the tablets with respect to their release profiles. As a result, printed dutasteride was confirmed to be in an amorphous state and not recrystallized even after the accelerated storage stability. Out of the four bulking agents, Kollidon® VA 64, enhanced the dissolution of the printed dutasteride, reaching above 80% within 15 min. These results suggest that the hot-melt pneumatic dispenser was efficient in converting the solid state into an amorphous state, which significantly enhanced the dissolution. On the other hand, the tube-shaped 3D-printed tablet exhibited the fastest drug dissolution profile, which had the highest SA/V ratio in comparison to the cube, hemisphere, and pyramid shapes. These results confirm the dependency of the drug dissolution rate not only on its crystallinity but also on the surface area of the 3D-printed tablet. Therefore, a 3D-printer equipped with a hot-melt pneumatic dispenser possesses useful applicability in enhancing drug dissolution, especially for poorly water-soluble drugs, in a single-step process.

Efavirenz Loaded Nanostructured Lipid Carriers for Efficient and Prolonged Viral Inhibition in HIV-Infected Macrophages

Background: The clinical outcome of anti-HIV therapy is poor due to the inherent fallouts ofanti-HIV therapy. It is further worsened due to the presence of viral reservoirs in immune cellslike the macrophages. An ideal anti-HIV therapy must reach, deliver the drug and exert itsaction inside macrophages. To address this, we developed novel cationic nanostructured lipidcarriers of efavirenz (cationic EFV-NLC). Methods: The developed cationic EFV NLCs were evaluated for particle size, zeta potential,encapsulation efficiency, in-vitro drug release, DSC, XRD, TEM, cytotoxicity, cellular uptakestudies and anti-HIV efficacy in a monocyte-derived macrophage cell line (THP-1). Results: Cationic EFV-NLCs showed high encapsulation efficiency (90.54 ± 1.7%), uniformparticle size distribution (PDI 0.3-0.5 range) and high colloidal stability with positive zetapotential (+23.86 ± 0.49 mV). DSC and XRD studies confirmed the encapsulation of EFVwithin NLCs. Cytotoxicity studies (MTT assay) revealed excellent cytocompatibility (CC5013.23 ± 0.54 μg/mL). Fluorescence microscopy confirmed the efficient uptake of cationic EFVNLCs,while flow cytometry revealed time and concentration dependant uptake within THP-1cells. Cationic EFV-NLCs showed higher retention and sustained release with 2.32-fold higherpercent inhibition of HIV-1 in infected macrophages as compared to EFV solution at equimolarconcentrations. Interestingly, they demonstrated 1.23-fold superior anti-HIV efficacy over EFVloadedNLCs at equimolar concentrations. Conclusion: Cationic NLCs were capable of inhibiting the viral replication at higher limitsconsistently for 6 days suggesting successful prevention of HIV-1 replication in infectedmacrophages and thus can prove to be an attractive tool for promising anti-HIV therapy.

A new medium-throughput screening design approach for the development of hydroxymethylnitrofurazone (NFOH) nanostructured lipid carrier for treating leishmaniasis

Hydroxymethilnitrofurazone (NFOH) is a nitrofurazone derivative and has potential use in treating leishmaniasis. However, due to low water solubility and bioavailability, NFOH has failed in in vivo tests. Nanostructured lipid carrier (NLC) is an alternative to overcome these limitations by improving pharmacokinetics and modifying drug delivery. This work is focused on developing a novel NFOH-loaded NLC (NLC-NFOH) using a D-optimal mixture statistical design and high-pressure homogenization, for oral administration to treat leishmaniasis. The optimized NLC-NFOH consisted of Mygliol® 840, Gelucire® 50/13, and Precirol® ATO 5 as lipids. These lipids were selected using a rapid methodology Technobis Crystal 16 T M, microscopy, and DSC. Different tools for selecting lipids provided relevant scientific knowledge for the development of the NLC. NLC-NFOH presented a z-average of 198.6 ± 5.4 nm, PDI of 0.11 ± 0.01, and zeta potential of -13.7 ± 0.7 mV. A preliminary in vivo assay was performed by oral administration of NLC-NFOH (2.8 mg/kg) in one healthy male Wistar rat (341 g) by gavage. Blood from the carotid vein was collected, and the sample was analyzed by HPLC. The plasma concentration of NFOH after 5 h of oral administration was 0.22 μg/mL. This same concentration was previously found using free NFOH in the DMSO solution (200 mg/kg), which is an almost 100-fold higher dose. This study allowed a design space development approach of the first NLC-NFOH with the potential to treat leishmaniasis orally.

Prilling of API/fatty acid suspensions: Screening of additives for drug release modification

Current study screened additives which could modify the drug release from prills made of an active pharmaceutical ingredient/fatty acid (API/FA) suspension, without negatively influencing the processability and/or stability of the formulation. Therefore, 11 additives (i.e. emulsifiers, pore-formers and FA-based lubricants) were added in a 20% concentration to a paracetamol/behenic acid formulation. Two additives, Kolliphor® P338 and P407 provided complete drug release in less than 1 h, as their thermoreversible gel formation resulted in a disintegration of the prills. Lower Kolliphor® P338 or P407 concentrations (2.5-10%) resulted in a complete but slower drug release in 24 h as the prills no longer disintegrated and the release mechanism was dominated by pore-formation. Prills with a robust drug release profile (i.e. independent of pH and surfactant concentration of the dissolution medium) were obtained after the addition of ≥5% Kolliphor® P338 or P407 to the FA-based formulation. Based on a 6-month stability study, it was concluded that Kolliphor® P407 was a suitable additive to modify the drug release profile of API/FA suspension-based prills when formulations were stored below 25 °C at low relative humidity.

Recent strategies and advances in the fabrication of nano lipid carriers and their application towards brain targeting

In last two decades, the lipid nanocarriers have been extensively investigated for their drug targeting efficiency towards the critical areas of the human body like CNS, cardiac region, tumor cells, etc. Owing to the flexibility and biocompatibility, the lipid-based nanocarriers, including nanoemulsion, liposomes, SLN, NLC etc. have gained much attention among various other nanocarrier systems for brain targeting of bioactives. Across different lipid nanocarriers, NLC remains to be the safest, stable, biocompatible and cost-effective drug carrier system with high encapsulation efficiency. Drug delivery to the brain always remains a challenging issue for scientists due to the complex structure and various barrier mechanisms surrounding the brain. The application of a suitable nanocarrier system and the use of any alternative route of drug administration like nose-to-brain drug delivery could overcome the hurdle and improves the therapeutic efficiency of CNS acting drugs thereof. NLC, a second-generation lipid nanocarrier, upsurges the drug permeation across the BBB due to its unique structural properties. The biocompatible lipid matrix and nano-size make it an ideal drug carrier for brain targeting. It offers many advantages over other drug carrier systems, including ease of manufacturing and scale-up to industrial level, higher drug targeting, high drug loading, control drug release, compatibility with a wide range of drug substances, non-toxic and non-irritant behavior. This review highlights recent progresses towards the development of NLC for brain targeting of bioactives with particular reference to its surface modifications, formulations aspects, pharmacokinetic behavior and efficacy towards the treatment of various neurological disorders like AD, PD, schizophrenia, epilepsy, brain cancer, CNS infection (viral and fungal), multiple sclerosis, cerebral ischemia, and cerebral malaria. This work describes in detail the role and application of NLC, along with its different fabrication techniques and associated limitations. Specific emphasis is given to compile a summary and graphical data on the area explored by scientists and researchers worldwide towards the treatment of neurological disorders with or without NLC. The article also highlights a brief insight into two prime approaches for brain targeting, including drug delivery across BBB and direct nose-to-brain drug delivery along with the current global status of specific neurological disorders.

Matrix systems for oral drug delivery: Formulations and drug release

In this current article matrix formulations for oral drug delivery are reviewed. Conventional dosage forms and novel applications such as 3D printed matrices and aerogel matrices are discussed. Beside characterization, excipients and matrix forming agents are also enlisted and classified. The incorporated drug could exist in crystalline or in amorphous forms, which makes drug dissolution easily tunable. Main drug release mechanisms are detailed and reviewed to support rational design in pharmaceutical technology and manufacturing considering the fact that R&D members of the industry are forced to obtain knowledge about excipients and methods pros and cons. As innovative and promising research fields of drug delivery, 3D printed products and highly porous, low density aerogels with high specific surface area are spreading, currently limitlessly. These compositions can also be considered as matrix formulations.

The influence of excipients on physical and pharmaceutical properties of oral lyophilisates containing a pregabalin-acetaminophen combination

OBJECTIVES

The purpose of the study was to investigate and characterize the oral lyophilisates containing the pregabalin-acetaminophen drug combination and as xcipients mannitol with microcrystalline cellulose or hydroxypropyl methylcellulose, in order to conclude upon drug-excipient interactions and their stability implications, impact of excipients on drug release and on the physicochemical and mechanical properties of the pharmaceutical formulations.

METHODS

The oral tablets were made by using a Christ freeze-dryer alpha 2-4-LSC lyophilizer, and evaluated for stability, drug-excipient compatibility and homogeneity of the prepared pharmaceutical formulations. The formulations were evaluated for in vivo absorption in rabbits by histopathological exams.

RESULTS

FTIR and thermogravimetric analyses, DLS technique, SEM and NIR-CI studies confirmed the compatibility between compounds. From the determined physical and biochemical parameters of the formulations it was established that they are stable, homogeneous, and meet the conditions for orally disintegrating tablets.

CONCLUSION

In the case of the investigated pharmaceutical formulations the study evidenced the assembling through physical bonds between the excipients and the 'codrug' complex, which do not affect the release of the bioactive compounds.

Double-Layered Matrix of Shellac Wax-Lutrol in Controlled Dual Drug Release

Double-layered matrix tablets prepared from shellac wax-lutrol were fabricated using a molding technique, and the release of hydrochlorothiazide and propranolol HCl from the inner tablet or outer layer was studied. The simultaneous determination of dual drug release was measured with first derivative UV spectrophotometry. The tablet containing shellac wax as the outer tablet and lutrol as the inner tablet showed more appropriate drug release and the size of the inner layer influenced the rate of drug release. In addition, the aqueous solubility of the drug and the components of the inner tablet or outer layer affected the drug release behavior. Most of the double-layered tablets exhibited the drug-release pattern which fitted well with zero-order kinetic due to the restriction of the release surface. Biphasic drug release pattern was found in the tablet of which the outer layer rapidly eroded. The drug dissolution data from drug-loaded-outer layer could predict the dissolution time for the outer layer of drug-loaded inner part of double-layered matrix tablet. Incorporation of lutrol increased the drug release from shellac wax matrix, and the zero-order release was attained by fabricating it into a double-layered tablet.

Solvent-free melting techniques for the preparation of lipid-based solid oral formulations

Lipid excipients are applied for numerous purposes such as taste masking, controlled release, improvement of swallowability and moisture protection. Several melting techniques have evolved in the last decades. Common examples are melt coating, melt granulation and melt extrusion. The required equipment ranges from ordinary glass beakers for lab scale up to large machines such as fluid bed coaters, spray dryers or extruders. This allows for upscaling to pilot or production scale. Solvent free melt processing provides a cost-effective, time-saving and eco-friendly method for the food and pharmaceutical industries. This review intends to give a critical overview of the published literature on experiences, formulations and challenges and to show possibilities for future developments in this promising field. Moreover, it should serve as a guide for selecting the best excipients and manufacturing techniques for the development of a product with specific properties using solvent free melt processing.

Single and dual drug release patterns from shellac wax-lutrol matrix tablets fabricated with fusion and molding techniques

The objective of this investigation was to prepare the shellac wax matrix tablets by fusion and molding technique incorporated with Lutrol in different ratios to modify the hydrophobicity of matrix tablet. The matrix tablets with single drug were loaded either with propranolol hydrochloride or hydrochlorothiazide as hydrophilic and hydrophobic model drugs, and a dual drug formula was also prepared. The single and dual drug release patterns were studied in a dissolution apparatus using distilled water as medium. Propranolol hydrochloride released from matrix was easier than hydrochlorothiazide. Drug release from shellac wax matrix could be enhanced by incorporation of Lutrol. However retardation of drug release from some matrix tablets was evident for the systems that could form dispersion in the dissolution medium. The gel network from high content of Lutrol was hexagonal which was a dense and more compact structure than the other structures found when low amounts of Lutrol were present in the formula. Therefore, the formulae with high content of Lutrol could prolong drug release more efficiently than those containing low content of Lutrol. Hence shellac wax matrix could modulate the drug release with the addition of Lutrol. Sustainable dual drug release was also obtained from these developed matrix tablets. Thus shellac wax-Lutrol component could be used as a potential matrix tablet prepared with fusion and molding technique with excellent controlled drug release.

Modulation of tramadol release from a hydrophobic matrix: implications of formulations and processing variables

In the present investigation, hydrogenated cottonseed oil (HCSO) was evaluated as a sustained release matrix for a freely soluble drug, tramadol. Hydrophobic matrix tablets of tramadol, was evaluated by compression of physical mixture of drug and wax, dispersion of drug in HCSO by hot fusion or solubilisation techniques. The method of preparation of tablet had a significant effect on drug release with higher release observed from direct compression matrices and slower release from matrix prepared by dispersion (hot-fused matrices). Influence of addition of hydroxypropylmethyl cellulose, sodium carboxymethyl cellulose, polyethylene glycol 4000 and surfactants like sodium lauryl sulphate and polysorbate 20 to HCSO matrix on drug release was investigated. The added excipients exhibited a propensity to enhance drug release from the HCSO matrix. NaCMC was effective at a lower ratio (<10% w/w) and when incorporated at higher level made HCSO matrix to erode and disintegrate in a short period.

Modified drug release of poloxamer matrix by including water-soluble and water-insoluble polymer

BACKGROUND

The ability of poloxamer 407 to control drug release was investigated along with the effect of incorporation of a second polymer with poloxamer on dissolution behavior.

METHODS

Tablets made of 30% w/w/ theophylline and 15%, 25%, 50%, or 69% poloxamer were prepared. Additionally, tablets containing mixture of poloxamer with carbomer or hypromellose in a 1:1 ratio and at different total levels (15%, 30%, and 50%) were also tested.

RESULTS

Data show that as the level of poloxamer increased, drug release decreased. Formulations containing poloxamer: hypromellose 1:1 at 50% level and formulations containing poloxamer: carbomer 1:1 at 30% level produced controlled release matrices over 24 hours of testing dissolution. The mechanism of drug release follows anomalous relaxation non-Fickian diffusion model.

CONCLUSIONS

These results suggest that the combination of poloxamer 407 with hypromellose or carbomer is feasible and has potential to offer the formulator control over drug release.

Supercritical Antisolvent Versus Coevaporation— Preparation and Characterization of Solid Dispersions

The objective of this work was to improve the dissolution rate and aqueous solubility of oxeglitazar. Solid dispersions of oxeglitazar in PVP K17 (polyvinilpyrrolidone) and poloxamer 407 (polyoxyethylene-polyoxypropylene block copolymer) were prepared by supercritical antisolvent (SAS) and coevaporation (CoE) methods. Drug-carrier formulations were characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, gas chromatography, UV/VIS spectroscopy and in vitro dissolution tests. The highest dissolution rate (nearly 3-fold higher than raw drug) was achieved by preparation of drug/PVP K17 coevaporate. Oxeglitazar/PVP K17 solid dispersions were stabilized by hydrogen bonding but contained higher amount of residual dichloromethane (DCM) than poloxamer 407 formulations regardless of the method of preparation. SAS prepared oxeglitazar/poloxamer 407 dissolved more than two times faster than raw drug. However, unlike PVP K17, poloxamer 407 did not form a single phase amorphous solid solution with oxeglitazar which has been manifested in higher degrees of crystallinity, too. Among the two techniques, evaluated in this work, conventional coevaporation resulted in higher amorphous content but SAS reduced residual solvent content more efficiently.

Approaches for the development of solid and semi-solid lipid-based formulations

Interest in Lipid Based Drug Delivery (LBDD) has developed over the past decade fuelled by a better understanding of the multiple roles lipids may play in enhancing oral bioavailability. Moreover, the emergence of novel excipients with acceptable regulatory and safety profiles coupled with advances in formulation technologies have greatly improved the potential for successful lipid based formulations. With the growing interest in this field, there is an increasing need for guidelines in excipient selection and characterization; material handling, formulation design, and processing techniques to obtain effective and patient-compliant dosage forms. The aim of this review is to present the recent approaches in selecting the most appropriate lipid system(s); methods for characterization of their behavior in vitro and in vivo; and the current formulation and processing techniques to obtain various solid dosage forms.

Pharmacokinetics of the CYP 3A substrate simvastatin following administration of delayed versus immediate release oral dosage forms

PURPOSE

The study was designed to evaluate the effect of delayed release (DR) on absorption and bioavailability of intestinally metabolized drugs after oral dosing, using the HMG-CoA reductase inhibitor simvastatin, a CYP3A substrate, as a model drug.

MATERIALS AND METHODS

To target drug release and to assess regional gastrointestinal absorption of the CYP 3A substrate simvastatin from the distal parts of the intestine, delayed release film coated tableted oral dosage forms were developed. Simvastatin delayed release tablet, simvastatin immediate release capsule and simvastatin immediate release tablet Zocor were administered as single doses (20 mg) to fasting healthy volunteers in a crossover design.

RESULTS

Simvastatin bioavailability was increased by a factor of three, as compared to the reference formulation Zocor. The overall metabolite levels from the immediate release capsules tended to be higher throughout the period studied than the metabolite levels following administration of Zocor and simvastatin delayed release dosage form.

CONCLUSIONS

The interplay between gastrointestinal physiology (lower CYP 3A expression in the distal ileum and the colon) and formulation design (zero-order controlled release after a predetermined lag-time) resulted in successful absorption and bioavailability improvement and represent a viable strategy to reduce the dose of CYP 3A drugs.

Drug release behaviour from methyl methacrylate-starch matrix tablets: effect of polymer moisture content

The aim of this work was to study the effect of the initial moisture content of the polymer on the tabletting and drug release behaviour of controlled release inert matrices elaborated with methyl methacrylate (MMA)-starch copolymers. The copolymers, obtained by free radical polymerisation and dried by two different methods (oven-drying or freeze-drying), were equilibrated at different relative humidities (0%, 25%, 50% and 75% RH) at room temperature. From these copolymers, matrix systems were directly compressed containing either a slightly water-soluble drug (anhydrous theophylline) or a freely water-soluble drug (salbutamol sulphate), and their compaction properties and in vitro dissolution profiles were evaluated. The release profiles were compared following model-independent methods, such as the Qt parameter and the similarity factor f2. Moreover, several kinetic models were employed to evaluate the possible changes in the release mechanism. For anhydrous theophylline, the initial moisture content of the copolymers did not affect the release characteristics from the inert matrices under study, and a typical Fickian diffusion mechanism was observed for the different formulations. However, in case of salbutamol sulphate, the presence of moisture might induce a fast drug dissolution, promoting the weakness of the matrix structure and hence, its partial disintegration. So, an "anomalous" mixed phenomenon of diffusion and erosion was found, influenced by the initial moisture content of the copolymer.