Characterization of Re-188–Sn microparticles used for synovitis treatment

Formulation and In-vivo Characterization of 177Lu-tin-colloid as a Radiosynovectomy Agent

INTRODUCTION

Arthritis is an inflammatory disorder that affects one or more joints of the body for various reasons, including autoimmune disorders, trauma, or infection. In many cases, traditional long-term treatment with various drug combinations (NSAIDs, diseasemodifying antirheumatic drugs, systemic corticosteroids, etc.) can provide relief, but many joints require additional local treatment. Radiosynovectomy (RSV) is an alternative method to current treatment options. Both the global supply shortage of 90Y in recent years and the increasing use of 177Lu-labeled radiopharmaceuticals in the field of nuclear medicine have made it possible to develop 177Lu-labeled microparticles and test them in small groups as RSV agents. This study aimed to develop the 177Lu labeled tin colloid formulation and demonstrate its invivo characterization.

MATERIALS AND METHODS

Particle size, shape, and labelling efficiency of the four formulations developed were determined. The formula with the highest labelling efficiency was selected for further studies. The quality of the formulation was evaluated based on radionuclidic, radiochemical, and microbial purity. In-vitro stability was evaluated by determining the labelling efficiency. In-vitro stability was tested in PBS and synovial fluid. The biological characterization was assessed using SPECT/CT after injecting the formulation into the normal knee joints of the rabbits.

RESULTS

Aggregated colloidal particles were spherical with a particle size of <5 μm. Labelling efficiency and radiochemical purity were >95 and 97.65% (Rf=0.2), respectively. The formulation was stable in vitro for up to 72 hours, both in PBS and synovial fluid. The formulation was homogeneously distributed in the joint at 0 and 1 hour after injection, and radioactivity- related involvement and inguinal lymph node involvement due to possible leakage were not detected in the late period. No pyrogenic/allergic side effects were observed during this period.

CONCLUSION

177Lu-tin-colloid was successfully prepared under optimized reaction conditions with high binding efficiency and radiochemical purity. The radiolabeled colloid was found to be stable in-vitro both in PBS and synovial fluid at room temperature. Serial PCET/CT images revealed that the activity was completely retained within the synovial cavity, with no activity leakage out of the joint until 48 hours after the injection. With the support of the results from further clinical studies, it may be possible for the formulation to enter clinical use.

Operational nuclear research reactors in the Asia-Pacific with potential for medical radionuclide production

Personalised cancer treatment is of growing importance and can be achieved via targeted radionuclide therapy. Radionuclides with theranostic properties are proving to be clinically effective and are widely used because diagnostic imaging and therapy can be accomplished using a single formulation that avoids additional procedures and unnecessary radiation burden to the patient. For diagnostic imaging, single photon emission computed tomography (SPECT) or positron emission tomography (PET) is used to obtain functional information noninvasively by detecting the gamma (γ) rays emitted from the radionuclide. For therapeutics, high linear energy transfer (LET) radiations such as alpha (α), beta (β - ) or Auger electrons are used to kill cancerous cells in close proximity, whereas sparing the normal tissues surrounding the malignant tumour cells. One of the most important factors that lead to the sustainable development of nuclear medicine is the availability of functional radiopharmaceuticals. Nuclear research reactors play a vital role in the production of medical radionuclides for incorporation into clinical radiopharmaceuticals. The disruption of medical radionuclide supplies in recent years has highlighted the importance of ongoing research reactor operation. This article reviews the current status of operational nuclear research reactors in the Asia-Pacific region that have the potential for medical radionuclide production. It also discusses the different types of nuclear research reactors, their operating power, and the effects of thermal neutron flux in producing desirable radionuclides with high specific activity for clinical applications.

Neutron-activated theranostic radionuclides for nuclear medicine

Theranostics in nuclear medicine refers to personalized patient management that involves targeted therapy and diagnostic imaging using a single or combination of radionuclide (s). The radionuclides emit both alpha (α) or beta (β^-) particles and gamma (γ) rays which possess therapeutic and diagnostic capabilities, respectively. However, the production of these radionuclides often faces difficulties due to high cost, complexity of preparation methods and that the products are often sourced far from the healthcare facilities, hence losing activity due to radioactive decay during transportation. Subject to the availability of a nuclear reactor within an accessible distance from healthcare facilities, neutron activation is the most practical and cost-effective route to produce radionuclides suitable for theranostic purposes. Holmium-166 (¹⁶⁶Ho), Lutetium-177 (¹⁷⁷Lu), Rhenium-186 (¹⁸⁶Re), Rhenium-188 (¹⁸⁸Re) and Samarium-153 (¹⁵³Sm) are some of the most promising neutron-activated radionuclides that are currently in clinical practice and undergoing clinical research for theranostic applications. The aim of this paper is to review the physical characteristics, current clinical applications and future prospects of these neutron activated radionuclides in theranostics. The production, physical properties, validated clinical applications and clinical studies for each neutron-activated radionuclide suitable for theranostic use in nuclear medicine are reviewed in this paper.

Comparison of Lutetium-177 tin colloid and Rhenium-188 tin colloid radiosynovectomy in chronic knee arthritis

OBJECTIVE

To assess the role of Lutetium-177(Lu-177) tin colloid for radiosynovectomy and compare it with Rhenium-188 (Re-188) tin colloid radiosynovectomy for alleviation of pain in patients with chronic inflammatory arthritis of knee.

METHODS

Patients of chronic inflammatory arthritis of the knee underwent pretherapeutic evaluation in a form of knee ultrasonogram, bone scan and clinical evaluation. Fifty-seven recruited patients were allocated at random to receive either intraarticular injections of Lu-177 tin colloid or Re-188 tin colloid. Eventually, 27 patients received Re-188 tin colloid and 30 patients received Lu-177 tin colloid. The joint was then immobilized for 2 days. Response evaluation was done using knee ultrasound, bone scan and clinical findings.

RESULT

Of 30, 20 patients responded to radiosynovectomy in the Lu-177 tin colloid group compared to 21/27 patients in the Re-188 tin colloid group.

CONCLUSION

Lu-177 tin colloid is an effective alternative to Re-188 tin colloid for radiosynovectomy in patients with chronic inflammatory knee arthritis.

Lutetium-177 tin colloid radiosynovectomy in patients with inflammatory knee joint conditions intractable to prevailing therapy

OBJECTIVE

To evaluate the treatment response of lutetium-177 tin colloid radiosynovectomy (Lu-RSV) in patients with inflammatory knee joint conditions refractory to conventional treatment.

PATIENTS AND METHODS

Overall, 29 knee joints in 29 patients with chronic synovitis caused by various inflammatory knee joint diseases refractory to conventional therapy were included in this prospective study. All patients were assessed clinically for pain, tenderness, joint swelling, mobility, analgesic intake, and blood pool activity on bone scan. Different scores were assigned to all these parameters. RSV of knee joint was done using intra-articular injection of Lu tin colloid. Response was assessed at 3 months using various clinical parameter scores and blood pool bone scan as mentioned before and categorized as responders and nonresponders on the basis of change in percentage of cumulative scores.

RESULTS

Of the 29 joints, 21 were responders and eight were nonresponders at 3 months after RSV. There was a statistically significant reduction in clinical parameters cumulative scores at follow-up when compared with baseline (P<0.0001). Blood pool scintigraphy also showed decrease in blood pool activity compared with the baseline. There was statistically significant association between the responder group and absence of radiological abnormality.

CONCLUSION

Lu tin colloid synovectomy is a useful treatment modality in patients with chronic inflammatory knee joint conditions refractory to conventional treatment. Patients with shorter duration of disease and normal or minor radiographic findings are better candidates for RSV.

Formulation and characterization of lutetium-177-labeled stannous (tin) colloid for radiosynovectomy

OBJECTIVE

Easy large-scale production, easy availability, cost-effectiveness, long half-life, and favorable radiation characteristics have made lutetium-177 (Lu) a preferred radionuclide for use in therapy. Lutetium-177-labeled stannous (Lu-Sn) colloid particles were formulated for application in radiosynovectomy, followed by in-vitro and in-vivo characterization.

METHODS

Stannous chloride (SnCl2) solution and Lu were heated together, the pH was adjusted, and the particles were recovered by centrifugation. The heating time and amount of SnCl2 were varied to optimize the labeling protocol. The labeling efficiency (LE) and radiochemical purity (RCP) of the product were determined. The size and shape of the particles were determined by means of electron microscopy. In-vitro stability was tested in PBS and synovial fluid, and in-vivo stability was tested in humans.

RESULTS

LE and RCP were greater than 95% and ∼99% (Rf=0-0.1), respectively. Aggregated colloidal particles were spherical (mean size: 241±47 nm). The product was stable in vitro for up to 7 days in PBS as well as in synovial fluid. Injection of the product into the infected knee joint of a patient resulted in its homogenous distribution in the intra-articular space, as seen on the scan. No leakage of activity was seen outside the knee joint even 7 days after injection, indicating good tracer binding and in-vivo stability.

CONCLUSION

Lu-Sn colloid was successfully prepared with a high LE (>95%) and high RCP (99%) under optimized reaction conditions. Because of the numerous benefits of Lu and the ease of preparation of tin colloid particles, Lu-Sn colloid particles are significantly superior to its currently available counterparts for use in radiosynovectomy.

¹⁵³Sm-HM for arthritic knee pain. Estimated dosimetry

Osteoarthritis is the most common type of arthropathy and after cardiovascular diseases is the most disabling disease in developing countries. The dosimetry for the clinical application of 153-samarium-hydroxymacroaggregates (¹⁵³Sm-HM) for radiation synovectomy (RSV) and palliative treatment for arthritic pain, as far as we know, has not been reported. The aim of this research was to estimate the radiation dose necessary for synovial ablation and pain palliation with minimum risk to the patient. ¹⁵³Sm-HM (370 MBq) was administered intra-articularly in a patient with severe knee pain and hindered motility. Regions of interest drawn on sequential, conjugated, anterior and posterior scintigraphy images were used to obtain the respective activity. The data was entered into a knee joint histological-geometric model designed with micrometric dimensions to represent the synovial cell layers. The Monte Carlo code was used to calculate the absorbed dose in each of the 12 model-cells representing the distance from the synovial liquid to the cartilage or bone. The absorbed dose in the synovial cavity was 114 Gy which is sufficient energy for RSV. The treated patient referred little pain and higher motility with no adverse reactions. ¹⁵³Sm-HM is a potentially valid radiopharmaceutical for RSV, which effectively palliates knee pain.

Pharmacokinetics and dosimetry of 188 Re-pharmaceuticals

The main objective of this review is to apportion current and new insight into the biodistribution, radiopharmacokinetics, dosimetry and cell targeting of rhenium-188 labeled radiopharmaceuticals used as therapeutic drugs. The emphasis lies on the generator obtained rhenium-188, its physical, therapeutic, dosimetric and coordinated compounds. Its use in radioimmunotherapy for lymphoma and other hematological diseases with monoclonal antibodies is discussed. Radiolabeled peptides to target cell receptors are an important field in nuclear medicine and in some research facilities are already being used, especially, somatostatin, bombesin and other peptides. Small molecules labeled with 188 Re are promising as therapeutic drugs. A review about some of the non-specific targeting molecules with therapeutic or pain palliation effect such as phosphonates, lipiodol, microparticles and other interesting molecules is included. Research on the labeling of biomolecules with the versatile rhenium-188 has contributed to the development of therapeutics with favorable pharmacokinetic and dosimetric properties for cancer treatment.