Optimized preparation of daidzein-loaded chitosan microspheres and in vivo evaluation after intramuscular injection in rats

A Novel Cocrystal of Daidzein with Piperazine to Optimize the Solubility, Permeability and Bioavailability of Daidzein

It is well known that daidzein has various significant medicinal values and health benefits, such as anti-oxidant, anti-inflammatory, anti-cancer, anti-diabetic, cholesterol lowering, neuroprotective, cardioprotective and so on. To our disappointment, poor solubility, low permeability and inferior bioavailability seriously limit its clinical application and market development. To optimize the solubility, permeability and bioavailability of daidzein, the cocrystal of daidzein and piperazine was prepared through a scientific and reasonable design, which was thoroughly characterized by single-crystal X-ray diffraction, powder X-ray diffraction, Fourier transform infrared spectroscopy, differential scanning calorimetry and thermogravimetric analysis. Combining single-crystal X-ray diffraction analysis with theoretical calculation, detailed structural information on the cocrystal was clarified and validated. In addition, a series of evaluations on the pharmacogenetic properties of the cocrystal were investigated. The results indicated that the cocrystal of daidzein and piperazine possessed the favorable stability, increased solubility, improved permeability and optimized bioavailability of daidzein. Compared with the parent drug, the formation of cocrystal, respectively, resulted in 3.9-, 3.1-, 4.9- and 60.8-fold enhancement in the solubility in four different media, 4.8-fold elevation in the permeability and 3.2-fold in the bioavailability of daidzein. Targeting the pharmaceutical defects of daidzein, the surprising elevation in the solubility, permeability and bioavailability of daidzein was realized by a clever cocrystal strategy, which not only devoted assistance to the market development and clinical application of daidzein but also paved a new path to address the drug-forming defects of insoluble drugs.

Stability and encapsulation properties of daidzein in zein/carrageenan/sodium alginate nanoparticles with ultrasound treatment

This study aimed to prepare carrageenan/sodium alginate double-stabilized layers of zein nanoparticles loaded with daidzein using ultrasound technology to investigate the effect of ultrasound treatment on the stability of composite nanoparticles and encapsulation of daidzein. Compared with composite nanoparticles without ultrasound treatment, the encapsulation efficiency of nanoparticles was increased (90.36 %) after ultrasound treatment (320 W, 15 min). Ultrasound treatment reduced the particle size and PDI of nanoparticles and improved the stability and solubility of nanoparticles. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) revealed that the nanoparticles treated with ultrasound were smooth spherical and uniformly distributed. Fourier transform infrared spectroscopy (FTIR) results showed that the main forces that form nanoparticles are hydrogen bonding, electrostatic interactions and hydrophobic interactions. Fluorescence and CD chromatography showed that ultrasound treatment alters the secondary structure of zein and maintains nanoparticle stability. Encapsulation of daidzein in nanocarriers with ultrasound treatment can effectively scavenge DPPH and ABTS free radicals, improve antioxidant activity, and realize the slow release of daidzein in the gastrointestinal tract. The results showed that ultrasonication helps the construction of hydrophobic bioactives delivery carriers and provides better protection for unstable bioactives.

Natural Biocidal Compounds of Plant Origin as Biodegradable Materials Modifiers

The article presents a literature review of the plant origin natural compounds with biocidal properties. These compounds could be used as modifiers of biodegradable materials. Modification of polymer material is one of the basic steps in its manufacturing process. Biodegradable materials play a key role in the current development of materials engineering. Natural modifiers are non-toxic, environmentally friendly, and renewable. The substances contained in natural modifiers exhibit biocidal properties against bacteria and/or fungi. The article discusses polyphenols, selected phenols, naphthoquinones, triterpenoids, and phytoncides that are natural antibiotics. Due to the increasing demand for biodegradable materials and the protection of the natural environment against the negative effects of toxic substances, it is crucial to replace synthetic modifiers with plant ones. This work mentions industries where materials containing natural modifying additives could find potential applications. Moreover, the probable examples of the final products are presented. Additionally, the article points out the current world's pandemic state and the use of materials with biocidal properties considering the epidemiological conditions.

Preparation of Daidzein microparticles through liquid antisolvent precipitation under ultrasonication

In this study, daidzein microparticles (DMP) were prepared using an improved ultrasound-assisted antisolvent precipitation method. Preliminary experiments were conducted using six single-factor experiments, and principal component analysis (PCA) was adopted to obtain the three staple elements of the ultrasonic power, solution concentration, and nozzle diameter. The response surface Box-Behnken (BBD) design was used to optimize the level of the above factors. The optimal preparation conditions of the DMP were obtained as follows: the flow rate was 4 mL/min, the concentration of the daidzein solution was 16 mg/mL, the ratio of antisolvent to solvent (liquid-to-liquid ratio) was 9, the nozzle diameter was 300 μm, the ultrasonic power was 180 W (665 W/L), and the system speed was 760 r/min. The minimum average particle size of DMP was 181 ± 2 nm. The properties of daidzein particles before and after preparation were analyzed via scanning electron microscopy, X-ray diffraction analysis, Differential scanning calorimetry and Fourier transform infrared spectroscopy, no obvious change in its chemical structure was observed, but crystallinity was reduced. Compared with daidzein powder, DMP has a higher solubility and stronger antioxidant capacity. The above results indicate that the improved method of ultrasonication combined with antisolvent can reduce the size of daidzein particles and has a great potential in practical production.

Functionalized Particles Designed for Targeted Delivery

Pure bioactive compounds alone can only be exceptionally administered in medical treatment. Usually, drugs are produced as various forms of active compounds and auxiliary substances, combinations assuring the desired healing functions. One of the important drug forms is represented by a combination of active substances and particle-shaped polymer in the nano- or micrometer size range. The review describes recent progress in this field balanced with basic information. After a brief introduction, the paper presents a concise overview of polymers used as components of nano- and microparticle drug carriers. Thereafter, progress in direct synthesis of polymer particles with functional groups is discussed. A section is devoted to formation of particles by self-assembly of homo- and copolymer-bearing functional groups. Special attention is focused on modification of the primary functional groups introduced during particle preparation, including introduction of ligands promoting anchorage of particles onto the chosen living cell types by interactions with specific receptors present in cell membranes. Particular attention is focused on progress in methods suitable for preparation of particles loaded with bioactive substances. The review ends with a brief discussion of the still not answered questions and unsolved problems.

Improved Pharmacokinetics and Tissue Uptake of Complexed Daidzein in Rats

The pharmacokinetic profile and tissue uptake of daidzein (DAI) was determined in rat serum and tissues (lungs, eyes, brain, heart, spleen, fat, liver, kidney, and testes) after intravenous and intraperitoneal administration of DAI in suspension or complexed with ethylenediamine-modified γ-cyclodextrin (GCD-EDA/DAI). The absolute and relative bioavailability of DAI suspended (20 mg/kg i.v. vs. 50 mg/kg i.p.) and complexed (0.54 mg/kg i.v. vs. 1.35 mg/kg i.p.) was determined. After i.p. administration, absorption of DAI complexed with GCD-EDA was more rapid (t_max = 15 min) than that of DAI in suspension (t_max = 45 min) with a ca. 3.6 times higher maximum concentration (C_max = 615 vs. 173 ng/mL). The i.v. half-life of DAI was longer in GCD-EDA/DAI complex compared with DAI in suspension (t_0.5 = 380 min vs. 230 min). The volume of distribution of DAI given i.v. in GCD-EDA/DAI complex was ca. 6 times larger than DAI in suspension (38.6 L/kg vs. 6.2 L/kg). Our data support the concept that the pharmacokinetics of DAI suspended in high doses are nonlinear. Increasing the intravenous dose 34 times resulted in a 5-fold increase in AUC. In turn, increasing the intraperitoneal dose 37 times resulted in a ca. 2-fold increase in AUC. The results of this study suggested that GCD-EDA complex may improve DAI bioavailability after i.p. administration. The absolute bioavailability of DAI in GCD-EDA inclusion complex was ca. 3 times greater (F = 82.4% vs. 28.2%), and the relative bioavailability was ca. 21 times higher than that of DAI in suspension, indicating the need to study DAI bioavailability after administration by routes other than intraperitoneal, e.g., orally, subcutaneously, or intramuscularly. The concentration of DAI released from GCD-EDA/DAI inclusion complex to all the rat tissues studied was higher than after administration of DAI in suspension. The concentration of DAI in brain and lungs was found to be almost 90 and 45 times higher, respectively, when administered in complex compared to the suspended DAI. Given the nonlinear relationship between DAI bioavailability and the dose released from the GCD-EDA complex, complexation of DAI may thus offer an effective approach to improve DAI delivery for treatment purposes, for example in mucopolysaccharidosis (MPS), allowing the reduction of ingested DAI doses.

Daidzein cocrystals: An opportunity to improve its biopharmaceutical parameters

The present study involves the contribution of cocrystallization towards the modification of the biopharmaceutical parameters of poorly watersoluble plant-originated isoflavone, daidzein (DAID). The cocrystals were prepared with GRAS status coformers i.e., isonicotinamide, theobromine and cytosine using mechanochemical grinding and characterized by various analytical techniques (DSC, FT-IR, PXRD and solid-state NMR). Crystal structures were obtained from PXRD data using BIOVIA Materials Studio software and compared in terms of supramolecular motifs. An additional qualitative and quantitative insight into interactions between both components of the cocrystal illustrated the presence of OH⋯N and OH⋯O=C heterosynthons and revealed a stabilizing role of hydrogen bonding. The cocrystals were further evaluated for their solubility, intrinsic dissolution and in vivo profile. Solubility and dissolution studies of pure daidzein and its cocrystals, namely daidzein-isonicotinamide (DIS), daidzein-cytosine (DCYT) and daidzein-theobromine (DTB) exhibited an almost 2-fold improvement. Evaluation of maximum concentration (Cmax) of cocrystals reveals that the DIS cocrystal shows the highest Cmax of 1848.7 ng/ml followed by DCYT cocrystal (1614.9 ng/ml) and DTB cocrystal (1326.0 ng/ml) in comparison to DAID which has a Cmax 870.5 ng/ml. Each of these cocrystals showed significant enhancement in in vivo and in vitro activities in comparison to daidzein. Thus, this report suggests cocrystallization as a viable approach to resolve the solubility and bioavailability issues that circumvent the use of a therapeutically potential isoflavone, daidzein.

Preparation and characterization of 45S5 bioactive glass-based scaffolds loaded with PHBV microspheres with daidzein release function

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) microsphere loaded 45S5 bioactive glass (BG) based scaffolds with drug releasing capability have been developed. PHBV microspheres with a mean particle size 4 ± 2 μm loaded with daidzein were obtained by oil-in-water single emulsion solvent evaporation method and applied to the surface of BG scaffolds by dip coating technique. The morphology, in vitro bioactivity in simulated body fluid (SBF), mechanical properties and drug release kinetics of microsphere loaded scaffolds were studied. The microspheres were shown to be homogeneously dispersed on the scaffold surfaces. It was confirmed that hydroxyapatite crystals homogeneously grew not only on the surface of the scaffold but also on the surface of the microspheres within 3 days of immersion in SBF. The daidzein release from the microsphere loaded scaffolds lasted almost 1 month and was determined to be diffusion controlled. The microsphere loaded BG scaffolds with daidzein releasing capability obtained in this study are a candidate for bone tissue engineering. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1765-1774, 2017.

Formulation, physicochemical characterization, and in vitro study of chitosan/HPMC blends-based herbal blended patches

The current work prepared chitosan/hydroxypropyl methylcellulose (HPMC) blends and studied the possibility of chitosan/HPMC blended patches for Zingiber cassumunar Roxb. The blended patches without/with crude Z. cassumunar oil were prepared by homogeneously mixing the 3.5% w/v of chitosan solution and 20% w/v of HPMC solution, and glycerine was used as plasticizer. Then, they were poured into Petri dish and produced the blended patches in hot air oven at 70 ± 2°C. The blended patches were tested and evaluated by the physicochemical properties: moisture uptake, swelling ratio, erosion, porosity, Fourier transform infrared spectroscopy, differential scanning calorimetry, and X-ray diffraction, and photographed the surface and cross-section morphology under SEM technique. Herbal blended patches were studied by the in vitro release and skin permeation of active compound D. The blended patches could absorb the moisture and became hydrated patches that occurred during the swelling of blended patches. They were eroded and increased by the number of porous channels to pass through out for active compound D. In addition, the blended patches indicated the compatibility of the blended ingredients and homogeneous smooth and compact. The blended patches made from chitosan/HPMC blends provide a controlled release and skin permeation behavior of compound D. Thus, the blended patches could be suitably used for herbal medicine application.

Evaluation of toxicity and adjuvant effects of peptidoglycan microspheres orally administered to mice

In this study, peptidoglycan microspheres were evaluated for their toxicity and adjuvant effects after oral administration to mice. The liver and spleen indexes, CD cell content in peripheral blood and spleen, and immunoglobulin content in peripheral blood were measured by flow cytometry and indirect ELISA, respectively. Peptidoglycan microspheres with a loading capacity of 46.41 ± 0.83 g/100 g were prepared. In vivo tests showed that peptidoglycan microspheres revealed an immuno-enhancing profile as indicated by the slow increase of IgG content in peripheral blood compared with that of the untreated peptidoglycan group. In conclusion, peptidoglycan microspheres may be used as a new oral adjuvant in the host.

Overview of metabolism and bioavailability enhancement of polyphenols

A proper diet is one of major factors contributing to good health and is directly related to general condition of the organism. Phenolic compounds are abundant in foods and beverages (fresh and processed fruits and vegetables, leguminous plants, cereals, herbs, spices, tea, coffee, wine, beer) and their pleiotropic biological activities result in numerous health beneficial effects. On the other hand, high reactivity and very large diversity in terms of structure and molecular weight renders polyphenols one of the most difficult groups of compounds to investigate, as evidenced by ambiguous and sometimes contradictory results of many studies. Furthermore, phenolics undergo metabolic transformations, which significantly change their biological activities. Here, we discuss some aspects of metabolism and absorption of phenolic compounds. On the basis of information reported in the literature as well as in summaries of clinical trials and patent applications, we also give an overview of strategies for enhancing their bioavailability.

A biodegradable polymeric system for peptide-protein delivery assembled with porous microspheres and nanoparticles, using an adsorption/infiltration process

A biodegradable polymeric system is proposed for formulating peptides and proteins. The systems were assembled through the adsorption of biodegradable polymeric nanoparticles onto porous, biodegradable microspheres by an adsorption/infiltration process with the use of an immersion method. The peptide drug is not involved in the manufacturing of the nanoparticles or in obtaining the microspheres; thus, contact with the organic solvent, interfaces, and shear forces required for the process are prevented during drug loading. Leuprolide acetate was used as the model peptide, and poly(d,l-lactide-co-glycolide) (PLGA) was used as the biodegradable polymer. Leuprolide was adsorbed onto different amounts of PLGA nanoparticles (25 mg/mL, 50 mg/mL, 75 mg/mL, and 100 mg/mL) in a first stage; then, these were infiltrated into porous PLGA microspheres (100 mg) by dipping the structures into a microsphere suspension. In this way, the leuprolide was adsorbed onto both surfaces (ie, nanoparticles and microspheres). Scanning electron microscopy studies revealed the formation of a nanoparticle film on the porous microsphere surface that becomes more continuous as the amount of infiltrated nanoparticles increases. The adsorption efficiency and release rate are dependent on the amount of adsorbed nanoparticles. As expected, a greater adsorption efficiency (~95%) and a slower release rate were seen (~20% of released leuprolide in 12 hours) when a larger amount of nanoparticles was adsorbed (100 mg/mL of nanoparticles). Leuprolide acetate begins to be released immediately when there are no infiltrated nanoparticles, and 90% of the peptide is released in the first 12 hours. In contrast, the systems assembled in this study released less than 44% of the loaded drug during the same period of time. The observed release profiles denoted a Fickian diffusion that fit Higuchi’s model (t^1/2). The manufacturing process presented here may be useful as a potential alternative for formulating injectable depots for sensitive hydrophilic drugs such as peptides and proteins, among others.

Evaluation of daidzein-loaded chitosan microspheres in vivo after intramuscular injection in rats

Daidzein-loaded chitosan microspheres were prepared by emulsification/chemical-crosslinking technique. The dialysis bag method determined the release of daidzein from the microspheres. It demonstrated that the accumulative release curve in vitro was fit for the zero-order release equation and had good correlation with the absorptive fraction in vivo, suggesting the dialysis bag method evaluated the release of the microspheres well. The release of chitosan determined by the ninhydrin assay in vitro was very slow, less than 3 percent at 35 day. The pathological section by hematoxylin-eosin staining found the good biocompatibility of the prepared microspheres in the injective site. Combining the degradation photos by scanning electron microscopy with the plasma concentration-time data, it was speculated that the drug on the surface of the microspheres firstly released, then the major of drug near the surface and the inner of the microspheres released by diffusion through the shallow cavities and crack, lastly the drug released rapidly and completely being companied with the beginning of polymer degradation.

Inclusion complexes of isoflavones with two commercially available dendrimers: Solubility, stability, structures, release behaviors, cytotoxicity, and anti-oxidant activities

We prepared and characterized the inclusion complexes of daidzein with poly(amidoamine) (PAMAM) and poly(propylene imine) (PPI) dendrimers. Aqueous solubility of daidzein was significantly enhanced by both PAMAM and PPI (186- and 650-fold at 0.36mM, respectively). Daidzein in G3 PAMAM solution is more stable than that in G4 PPI. NMR studies reveal the encapsulation of daidzein within the interior cavities of PPI through hydrophobic interactions. Daidzein exhibits a slower release behavior from PPI than that from PAMAM. PPI/daidzein complex is much more toxic than PAMAM/daidzein complex on several cell lines. PAMAM/daidzein complexes showed similar protective effect on oxidative stress-induced cytotoxicity as compared to free daidzein. These results suggest that the inclusion of daidzein with dendrimer can effectively improve the solubility, prolong the delivery, and maintain the anti-oxidant activity of daidzein. This research provides new insights into dendrimer-based drug delivery systems and will be helpful for the design of novel dendrimer/drug formulations.

Improving bioavailability and stability of genistein by complexation with high-amylose corn starch

Genistein, like other phytochemicals, has beneficial health effects, but its bioavailability is limited. This research studied the effect of complexation of genistein with starch on genistein bioavailability. Genistein release from these complexes was tested in vitro under simulated intestinal conditions and in vivo in rats fed high-amylose corn starch (HACS)-genistein complexes (experimental group) as compared to those fed a physical mixture of HACS and genistein (controls). In vitro results showed that genistein release is sustained and fits the normal transit time of food in the intestine. The genistein concentration in the plasma was twice as high in the experimental group versus controls; the genistein concentration in the urine was also higher in the experimental group but lower in the feces. These results indicate that starch-genistein complexes increase genistein bioavailability and suggest that starch can affect the bioavailability of additional food components.

Size effect of se-enriched green tea particles on in vitro antioxidant and antitumor activities

The antioxidant and antitumor activities (in vitro) of superfine regular and Se-enriched green tea particles with different sizes (3.52 microm and 220 nm) were investigated in this paper. The vitamin C and tea polyphenol contents of green tea in different sizes were significantly different, and amino acid and chlorophyll just changed a little. The antioxidant activity of green tea particles was evaluated by DPPH radical scavenging and linoleic acid peroxidation inhibition methods, and the antitumor activity was evaluated by antiproliferation assay on HepG2, A549, and MGC803 cells. The results indicated that enrichment of selenium endowed green tea with higher antioxidant activity and antitumor activity on HepG2 and A549 cells but not on MGC803 cells. The DPPH radical scavenging rates of regular and Se-enriched green tea of 220 nm (67.87% and 69.49%, respectively) were significantly greater than that of 3.52 microm, but the inhibition of linoleic acid peroxidation for green tea of 220 nm was lower. The inhibitory rates of green tea of 220 nm on HepG2, A549, and MGC803 cells achieved 77.35%, 80.76%, and 87.54% for regular green tea, and 82.51%, 88.09%, and 74.48% for Se-enriched green tea at the dose of 100 microg mL (-1), values that were all significantly higher compared to that of 3.52 microm.