Self-assembled honokiol-loaded micelles based on poly(ɛ-caprolactone)-poly(ethylene glycol)-poly(ɛ-caprolactone) copolymer

Antibacterial Micelles-Loaded Carboxymethyl Chitosan/Oxidized Konjac Glucomannan Composite Hydrogels for Enhanced Wound Repairing

Antibacterial hydrogels have emerged as a promising approach for effective wound treatment. However, despite extensive research on the fabrication of antibacterial hydrogels, it remains challenging to develop injectable, biocompatible, transparent, and mass-producible hydrogels with antibacterial properties. In this study, we successfully fabricated an antibacterial drug-loaded composite hydrogel, named CC45/OKG40/HS, through a Schiff base reaction between carboxymethyl chitosan (CC) and oxidized konjac glucomannan (OKG), followed by the encapsulation of stevioside-stabilized honokiol (HS) micelles. The CC45/OKG40/HS hydrogel exhibited several favorable properties, including a short gel time (<10 min), high water content (>92%), injectability, good adhesiveness, self-healing ability, and high transparency. In vitro experiments confirmed its excellent antibacterial properties, antioxidant activities, and high biocompatibility (no cytotoxicity, hemolysis ratio <5%). Furthermore, in vivo evaluation demonstrated that the CC45/OKG40/HS0.5 hydrogel accelerated wound healing by relieving inflammatory responses and enhancing re-epithelization. Given its feasibility for mass production, the findings showed that the CC45/OKG40/HS hydrogel has the potential as an advanced antibacterial wound dressing for commercial use.

Nanotechnology-Based Drug Delivery Systems for Honokiol: Enhancing Therapeutic Potential and Overcoming Limitations

Honokiol (HNK) is a small-molecule polyphenol that has garnered considerable attention due to its diverse pharmacological properties, including antitumor, anti-inflammatory, anti-bacterial, and anti-obesity effects. However, its clinical application is restricted by challenges such as low solubility, poor bioavailability, and rapid metabolism. To overcome these limitations, researchers have developed a variety of nano-formulations for HNK delivery. These nano-formulations offer advantages such as enhanced solubility, improved bioavailability, extended circulation time, and targeted drug delivery. However, existing reviews of HNK primarily focus on its clinical and pharmacological features, leaving a gap in the comprehensive evaluation of HNK delivery systems based on nanotechnology. This paper aims to bridge this gap by comprehensively reviewing different types of nanomaterials used for HNK delivery over the past 15 years. These materials encompass vesicle delivery systems, nanoparticles, polymer micelles, nanogels, and various other nanocarriers. The paper details various HNK nano-delivery strategies and summarizes their latest applications, development prospects, and future challenges. To compile this review, we conducted an extensive search using keywords such as "honokiol", "nanotechnology", and "drug delivery system" on reputable databases, including PubMed, Scopus, and Web of Science, covering the period from 2008 to 2023. Through this search, we identified and selected approximately 90 articles that met our specific criteria.

A novel drug delivery system of mixed micelles based on poly(ethylene glycol)-poly(lactide) and poly(ethylene glycol)-poly(ɛ-caprolactone) for gambogenic acid

In this study, a novel mixed polymeric micelles formed from biocompatible polymers, poly(ethylene glycol)-poly(lactide) (mPEG-PLA) and poly(ethylene glycol)-poly(ɛ-caprolactone) (mPEG-PCL), used as a novel nanocarrier to encapsulate gambogenic acid (GNA). GNA-loaded mixed polymeric micelles (GNA-MMs) was prepared by cosolvent evaporation method. The mean average size of GNA-MMs was (83.23 ± 1.06) nm (n = 3) and entrapment efficiency (EE%) of GNA-MMs was (90.18 ± 2.59) % (n = 3) as well as (12.36 ± 0.64) % (n = 3) for drug loading (DL%). Transmission electron microscopy revealed that the GNA-MMs were spherical with "core-shell" structures. Compared with free GNA solution, in vitro release of GNA from GNA-MMs showed a two-phase sustained release profile: an initial relatively fast phase and followed by a slower release phase. Pharmacokinetic results also indicated that the GNA-MMs have longer systemic circulation time and slower plasma elimination rate than free GNA solution. Moreover, the in vitro cytotoxicity assay showed that the IC₅₀ values on HepG2 cells for GNA-MMs and free GNA were (5.67 ± 0.02) μM and (9.02 ± 0.03) μM, respectively. In addition, GNA-MMs significantly increased the HepG2 cellular apoptosis in a concentration-dependent manner. In conclusion, the results showed that mPEG-PLA/mPEG-PCL mixed micelles may serve as an ideal drug delivery system for GNA to prolong drug circulation time in body, enhance bioavailability and retained its potent antitumor effect.

Preparation, characterisation, and controlled release of sex pheromone-loaded MPEG-PCL diblock copolymer micelles for Spodoptera litura (Lepidoptera: Noctuidae)

Sex pheromones are important for agricultural pest control. The main sex pheromone components of Spodoptera litura are (Z,E)-9,11- and (Z,E)-9,12-tetradecadienyl acetate (Z9,E11-14:Ac; Z9,E12-14:Ac). In this study, we investigated the optimal conditions for encapsulation of S. litura sex pheromonesin micelles via the self-assembly method using monomethoxy poly (ethylene glycol)-poly (ε-caprolactone) (MPEG-PCL) as a biodegradable wall-forming material with low toxicity. In the L₉(3⁴) orthogonal experiment, 3 amphiphilic block copolymers, with different hydrophilicity to hydrophobicity ratios, were examined. Optimal encapsulation conditions included stirring of MPEG₅₀₀₀-PCL₂₀₀₀ at 1000 rpm at 30°C with 2.5:1 wall-forming: core material mass ratio. S. litura sex pheromone-loaded MPEG₅₀₀₀-PCL₂₀₀₀ micelles presented a homogeneous spherical morphology with apparent core-shell structure. The release kinetics of optimized MPEG₅₀₀₀-PCL₂₀₀₀ micelles was best explained by a first-order model. Encapsulated Z9,E11-14:Ac and Z9,E12-14:Ac were released slowly, not suddenly. Methyl oleate (MO) was used as an agent to control micellar release performance. When MO content equalled block content, micelle half-life could be prolonged, thereby controlling the release speed. Overall, our results showed MPEG-PCL as a promising controlled-release substrate for sex pheromones.

PhytoNanotechnology: Enhancing Delivery of Plant Based Anti-cancer Drugs

Natural resources continue to be an invaluable source of new, novel chemical entities of therapeutic utility due to the vast structural diversity observed in them. The quest for new and better drugs has witnessed an upsurge in exploring and harnessing nature especially for discovery of antimicrobial, antidiabetic, and anticancer agents. Nature has historically provide us with potent anticancer agents which include vinca alkaloids [vincristine (VCR), vinblastine, vindesine, vinorelbine], taxanes [paclitaxel (PTX), docetaxel], podophyllotoxin and its derivatives [etoposide (ETP), teniposide], camptothecin (CPT) and its derivatives (topotecan, irinotecan), anthracyclines (doxorubicin, daunorubicin, epirubicin, idarubicin), and others. In fact, half of all the anti-cancer drugs approved internationally are either natural products or their derivatives and were developed on the basis of knowledge gained from small molecules or macromolecules that exist in nature. Three new anti-cancer drugs introduced in 2007, viz. trabectedin, epothilone derivative ixabepilone, and temsirolimus were obtained from microbial sources. Selective drug targeting is the need of the current therapeutic regimens for increased activity on cancer cells and reduced toxicity to normal cells. Nanotechnology driven modified drugs and drug delivery systems are being developed and introduced in the market for better cancer treatment and management with good results. The use of nanoparticulate drug carriers can resolve many challenges in drug delivery to the cancer cells that includes: improving drug solubility and stability, extending drug half-lives in the blood, reducing adverse effects in non-target organs, and concentrating drugs at the disease site. This review discusses the scientific ventures and explorations involving application of nanotechnology to some selected plant derived molecules. It presents a comprehensive review of formulation strategies of phytoconstituents in development of novel delivery systems like liposomes, functionalized nanoparticles (NPs), application of polymer conjugates, as illustrated in the graphical abstract along with their advantages over conventional drug delivery systems supported by enhanced biological activity in in vitro and in vivo anticancer assays.

TRAIL and curcumin codelivery nanoparticles enhance TRAIL-induced apoptosis through upregulation of death receptors

Active targeting nanoparticles were developed to simultaneously codeliver tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) and Curcumin (Cur). In the nanoparticles (TRAIL-Cur-NPs), TRAIL was used as both active targeting ligand and therapeutic agent, and Cur could upregulate death receptors (DR4 and DR5) to increase the apoptosis-inducing effects of TRAIL. Compared with corresponding free drugs, TRAIL-Cur-NPs group showed enhanced cellular uptake, cytotoxicity and apoptosis induction effect on HCT116 colon cancer cells. In addition, in vivo anticancer studies suggested that TRAIL-Cur-NPs had superior therapeutic effect on tumors without obvious toxicity, which was mainly due to the high tumor targeting and synergistic effect of TRAIL and Cur. The synergistic mechanism of improved antitumor efficacy was proved to be upregulation of DR4 and DR5 in tumor cells induced by Cur. Thus, the prepared codelivery nanoparticles may have potential applications in colorectal cancer therapy.

Enhancing the anti-glioma therapy of doxorubicin by honokiol with biodegradable self-assembling micelles through multiple evaluations

Combination chemotherapy is an important protocol in glioma therapy and honokiol shows synergistic anticancer effects with doxorubicin. In this paper, honokiol (HK) and doxorubicin (Dox) co-loaded Methoxy poly(ethylene glycol)-poly(ε-caprolactone) (MPEG-PCL) nanoparticles were prepared with a assembly method. The particle size (about 34 nm), morphology, X-ray Powder Diffraction (XRD), in vitro release profile, cytotoxicity and cell proliferation effects were studied in detail. The results indicated that honokiol and doxorubicin could be efficiently loaded into MPEG-PCL nanoparticles simultaneously, and could be released from the micelles in an extended period in vitro. In addition, honokiol and doxorubicin loaded in MPEG-PCL nanoparticles could efficiently suppress glioma cell proliferation and induce cell apoptosis in vitro. Furthermore, Dox-HK-MPEG-PCL micelles inhibited glioma growth more significantly than Dox-MPEG-PCL and HK-MPEG-PCL in both nude mice and zebrafish tumor models. Immunohistochemical analysis indicated that DOX-HK-MPEG-PCL micelles improved Dox's anti-tumor effect by enhancing tumor cell apoptosis, suppressing tumor cell proliferation, and inhibiting angiogenesis. Our data suggest that Dox-HK-MPEG-PCL micelles have the potential to be applied clinically in glioma therapy.

Recent trends in nano-based drug delivery systems for efficient delivery of phytochemicals in chemotherapy

The phytochemicals were found to become more soluble when delivered by the nanocarriers and exhibited a remarkable effect on the cancer cells compared to its free form.

Thermo-responsive triblock copolymer micelles containing PEG6000 for either water-soluble or water-insoluble drug sustained release and treatment

Thermo-responsive micelles containing PEG₆₀₀₀ for indomethacin and doxorubicin hydrochloride sustained release.

PEG-PLGA copolymers: their structure and structure-influenced drug delivery applications

In the paper, we begin by describing polyethylene glycol-poly lactic acid-co-glycolic acid (PEG-PLGA) which was chosen as a typical model copolymer for the construction of nano-sized drug delivery systems and also the types of PEG-PLGA copolymers that were eluted. Following this we examine the structure-influenced drug delivery applications including nanoparticles, micelles and hydrogels. After that, the preparation methods for nano-sized delivery systems are presented. In addition, the drug loading mode of PEG-PLGA micelles is divided into three aspects. Finally, the drug release profiles of PEG-PLGA micelles, both in terms of their in vitro and in vivo characteristics, are represented. PEG-PLGA copolymers are very suitable for the construction of micelles as carriers for insoluble drugs. This article reviews the structure and the different structure-influenced applications of PEG-PLGA copolymers, concentrating on the application of PEG-PLGA micelles.

Novel thermosensitive hydrogel for preventing formation of abdominal adhesions

Adhesions can form after almost any type of abdominal surgery. Postoperative adhesions can be prevented by improved surgical techniques, such as reducing surgical trauma, preventing ischemia, and avoiding exposure of the peritoneal cavity to foreign materials. Although improved surgical techniques can potentially reduce formation of adhesions, they cannot be eliminated completely. Therefore, finding more effective methods to prevent postoperative adhesions is imperative. Recently, we found that a novel thermosensitive hydrogel, ie, poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) (PCEC) had the potential to prevent postoperative adhesions. Using the ring-opening polymerization method we prepared a PCEC copolymer which could be dissolved and assembled at 55°C into PCEC micelles with mean size of 25 nm. At body temperature, a solution containing PCEC micelles could convert into a hydrogel. The PCEC copolymer was biodegradable and had low toxicity in vitro and in vivo. We found that most animals in a hydrogel-treated group (n = 10) did not develop adhesions. In contrast, 10 untreated animals developed adhesions that could only be separated by sharp dissection (P < 0.001). The hydrogel could adhere to peritoneal wounds and degraded gradually over 7-9 days, transforming into a viscous fuid that was completely absorbed within 12 days. The injured parietal and visceral peritoneum remesothelialized over about seven and nine days, respectively. This study confirms that PCEC hydrogel has potential application in the prevention of postoperative adhesions.

Rapamycin-loaded poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) nanoparticles: preparation, characterization and potential application in corneal transplantation

OBJECTIVES

Allograft rejection is the major cause of corneal graft failure. To inhibit corneal allograft rejection, rapamycin as a novel immunosuppressive agent has been discovered. However, the high water insolubility and low bioavailability of rapamycin has strongly hindered its application in the clinical setting. In this paper, we attempted to develop a novel rapamycin nano-formulation using poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) (PCEC) nanoparticles as carrier by an emulsion evaporation method for potential application in corneal transplantation.

METHODS

The solubility of rapamycin in the nano-formulation was determined and in-vitro release studies were performed. The developed rapamycin-loaded PCEC nanoparticles were further characterized by dynamic light scattering, transmission electron microscopy, X-ray diffraction and differential scanning calorimetery. Toxicity studies were performed in eye-related cell lines.

KEY FINDINGS

The rapamycin in nano-formulation exhibited ∼10³-fold increased solubility as compared with native rapamycin. According to the results of the in-vitro cytotoxicity assay, the developed PCEC nanoparticles did not exhibit any apparent cytotoxicity against various eye-related cell lines with PCEC nanoparticle concentrations in the range of 0.05-10 mg/ml. In-vitro release study showed that the release of rapamycin was sustained from PCEC nanoparticles over a period of 48 h.

CONCLUSIONS

All the results suggested that the developed rapamycin-loaded PCEC nanoparticles might be suitable for immunosuppression in corneal transplantation by instillation administration.

Ocular biocompatibility and structural integrity of micro- and nanostructured poly(caprolactone) films

The identification of biomaterials that are well tolerated in the eye is important for the development of new ocular drug delivery devices and implants, and the application of micro- and nanoengineered devices to biomedical treatments is predicated on the long-term preservation within the target organ or tissue of the very small functional design elements. This study assesses the ocular tolerance and durability of micro- and nanostructured biopolymer thin films injected or implanted into the rabbit eye. Structured poly(caprolactone) (PCL) thin films were placed in adult rabbit eyes for survival studies, with serial ophthalmic examinations over 6 months. Morphologic abnormalities and device/tissue reactions were evaluated by histologic studies, and scanning electron microscopy (SEM) of films was used to determine the structural integrity. Structured PCL thin films (20- to 40-μm thick) were constructed to design specifications with 50-μm linear microgrooves or arrays of nanopores with ~30-nm diameters. After up to 9 months of ocular residency, SEM on devices retrieved from the eye showed preservation of micro- and nanostructural features. In ocular safety evaluations carried out over 6 months, serial examinations in 18 implanted eyes showed no evidence of chronic inflammation, cataractogenesis, or retinal toxicity. Postoperative ocular inflammation was seen in 67% of eyes for 1 week, and persistent corneal edema occurred in 1 eye. Histology revealed no ocular inflammation or morphologic abnormalities of ocular tissues. Thin-film/tissue responses such as cellular reaction, fibrosis, or surface biodeposits were not seen. Micro- and nanostructured PCL thin films exhibited acceptable ocular tolerance and maintained the structural integrity of design features while residing in the eye. Thin-film micro- and nanostructured PCL appears to be a feasible biomaterial for intraocular therapeutic applications.

Efficient inhibition of colorectal peritoneal carcinomatosis by drug loaded micelles in thermosensitive hydrogel composites

In this work, we aim to develop a dual drug delivery system (DDDS) of self-assembled micelles in thermosensitive hydrogel composite to deliver hydrophilic and hydrophobic drugs simultaneously for colorectal peritoneal carcinomatosis (CRPC) therapy. In our previous studies, we found that poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) (PCEC) copolymers with different molecular weight and PEG/PCL ratio could be administered to form micelles or thermosensitive hydrogels, respectively. Therefore, the DDDS was constructed from paclitaxel (PTX) encapsulated PCEC micelles (PTX-micelles) and a fluorouracil (Fu) loaded thermosensitive PCEC hydrogel (Fu-hydrogel). PTX-micelles were prepared by self-assembly of biodegradable PCEC copolymer (M(n) = 3700) and PTX without using any surfactants or excipients. Meanwhile, biodegradable and injectable thermosensitive Fu-hydrogel (M(n) = 3000) with a lower sol-gel transition temperature at around physiological temperature was also prepared. The obtained PTX-micelles in thermosensitive Fu-hydrogel (PTX-micelles-Fu-hydrogel) composite is a free-flowing sol at ambient temperature and rapidly turned into a non-flowing gel at physiological temperature. In addition, the results of cytotoxicity, hemolytic study, and acute toxicity evaluation suggested that the PTX-micelles-Fu-hydrogel was non-toxic and biocompatible. In vitro release behaviors of PTX-micelles-Fu-hydrogel indicated that both PTX and Fu have a sustained release behavior. Furthermore, intraperitoneal application of PTX-micelles-Fu-hydrogel effectively inhibited growth and metastasis of CT26 peritoneal carcinomatosis in vivo (p < 0.001), and induced a stronger antitumor effect than that of Taxol® plus Fu (p < 0.001). The pharmacokinetic study indicated that PTX-micelles-Fu-hydrogel significantly increased PTX and Fu concentration and residence time in peritoneal fluids compared with Taxol® plus Fu group. Thus, the results suggested the micelles-hydrogel DDDS may have great potential clinical applications.

Polysorbate 80 coated poly (ɛ-caprolactone)-poly (ethylene glycol)-poly (ɛ-caprolactone) micelles for paclitaxel delivery

In this article, polysorbate 80 coated poly (ɛ-caprolactone)-poly (ethylene glycol)-poly (ɛ-caprolactone) (PCEC) micelles were successfully prepared for paclitaxel (PTX) delivery. The particle size distribution, morphology, drug loading, encapsulation efficiency and sustained release profile of the micelles were studied in detail. The safety of the micelle formulation was evaluated by MTT assay on HEK293 cells. And the encapsulated PTX in the micelles remained potent antitumor effect on C6 glioma cells. The pharmacokinetic study showed that the PCEC micelles coated with polysorbate 80 altered the biodistribution pattern and increased PTX concentration in the brain significantly compared to the uncoated micelles and the free drug after intravenous injection. The results indicated that polysorbate 80 coated PCEC micelles might be a candidate for PTX delivery for brain tumor chemotherapy.

Self-assembled mPEG-PCL-g-PEI micelles for simultaneous codelivery of chemotherapeutic drugs and DNA: synthesis and characterization in vitro

BACKGROUND

In this paper, a series of amphiphilic triblock copolymers based on polyethylene glycol-poly ɛ-caprolactone-polyethylenimine (mPEG-PCL-g-PEI) were successfully synthesized, and their application for codelivery of chemotherapeutic drugs and DNA simultaneously was investigated.

METHODS AND RESULTS

These copolymers could self-assemble into micelles with positive charges. The size and zeta potential of the micelles was measured, and the results indicate that temperature had a large effect on the micelles obtained. In vitro gene transfection evaluation in cancer cells indicated that the self-assembled micelles could serve as potential gene delivery vectors. In addition, hydrophobic drug entrapment efficiency and codelivery with the gene was also studied in vitro. The self-assembled micelles could load doxorubicin efficiently and increase cellular uptake in vitro, while maintaining high gene transfection efficiency.

CONCLUSION

The triblock copolymer mPEG-PCL-g-PEI could be a novel vector for codelivery of drug and gene therapy.

Paclitaxel-loaded polymeric micelles based on poly(ɛ-caprolactone)-poly(ethylene glycol)-poly(ɛ-caprolactone) triblock copolymers: in vitro and in vivo evaluation

The purpose of this study was to develop polymeric nanoscale drug-delivery system (nano-DDS) for paclitaxel (PTX) from poly(ɛ-caprolactone)-poly(ethylene glycol)-poly(ɛ-caprolactone) (PCL-PEG-PCL, PCEC) copolymers, intended to be intravenously administered, able to improve the therapeutic efficacy of the drug and devoid of the adverse effects of Cremophor EL. Both of the PTX-loaded polymeric micelles and polymersomes were successfully prepared from PCEC copolymers. The obtained PTX-loaded micelles exhibited core-shell morphology with satisfactory size (93 nm), and were favorable for intravenous injection. In vitro cytotoxicity demonstrated that the cytotoxic effect of PTX-loaded micelles was lower than that of Taxol (Bristol-Myers Squibb, Princeton, New Jersey). Pharmacokinetic results indicated that the PTX-loaded micelles had longer systemic circulation time and slower plasma elimination rate than those of Taxol. Furthermore, PTX-loaded micelles showed greater tumor growth-inhibition effect in vivo on EMT6 breast tumor, in comparison with Taxol. Therefore, the prepared polymeric micelles might be potential nano-DDS for PTX delivery in cancer chemotherapy.

Poly-є-caprolactone based formulations for drug delivery and tissue engineering: A review

Biodegradable polymer based novel drug delivery systems have provided many avenues to improve therapeutic efficacy and pharmacokinetic parameters of medicinal entities. Among synthetic biodegradable polymer, poly-є-caprolactone (PCL) is a polymer with very low glass transition temperature and melting point. Owing to its amicable nature and tailorable properties it has been trialed in almost all novel drug delivery systems and tissue engineering application in use/investigated so far. This review aims to provide an up to date of drugs incorporated in different PCL based formulations, their purpose and brief outcomes. Demonstrated PCL formulations with or without drugs, intended for drug delivery and/or tissue engineering application such as microsphere, nanoparticles, scaffolds, films, fibers, micelles etc. are categorized based on method of preparation.

Preparation and characterization of thermosensitive pluronic F127-b-poly(ɛ-caprolactone) mixed micelles

The mixed micelles composed of pluronic F127-b-poly(ɛ-caprolactone) (F127-CL) and bovine serum albumin (BSA) or polylactic acid (PLA) were fabricated for application as promising drug carriers. F127-CL copolymers were characterized by (1)H NMR, FT-IR, GPC, DSC, XRD and POM. They can self-assemble into micelles in water by solvent evaporation method. The thermo-responsivities of the pure and mixed micelles were investigated. The drug release behaviors were investigated in phosphate-buffered solution (PBS) and acetate buffer solution (ABS), respectively, at 37°C. The hemolysis and coagulation assay and the tumor cell growth inhibition assays were further evaluated. The morphologies of pure micelles underwent from the coexistence of the rods and spheres to the spheres with increasing the lengths of CL. The micelle behaviors were influenced with the addition of BSA and PLA. Both pure and mixed micelles of F127-CL with CL length of 200 show thermo-responsivities from 25 to 45°C, while form larger aggregations at high temperature. The hemolysis and coagulation assays showed that the micelles possess good blood compatibility. The cytotoxicity results showed that the copolymer was a safe carrier and the encapsulated doxorubicind.HCl remained its potent anti-tumor effect. The in vitro release profiles displayed a sustained release of DOX.HCl from the micelles. The block copolymers can be great potential as a nanocontainer in drug delivery systems.

Polymeric micelles as a drug delivery system enhance cytotoxicity of vinorelbine through more intercellular accumulation

Polymeric micelles had been used as an efficacious carrier system for anti-cancer drug delivery. However, it is not clear whether the molecular mechanism of drug encapsulated in micelles is same as free drug. In this study, the mechanism of vinorelbine loaded in glycol-phosphatidylethanolamine (PEG-PE) micelles (M-Vino) on tumor cells was investigated. Compared with free vinorelbine (Free Vino), M-Vino was more effective in inhibiting the growth of tumor cells in vitro, inducing G(2)/M phase arrest and apoptosis of tumor cells. M-Vino showed a faster entry and higher accumulation in 4T1 cells than free vinorelbine. Therefore, M-Vino destabilized microtubules, induced cell death, and enhanced its cytotoxicity through more intercellular accumulation of vinorelbine.

Nanomicellar formulations for sustained drug delivery: strategies and underlying principles

Micellar delivery systems smaller than 100 nm can be readily prepared. While micelles allow a great depth of tissue penetration for targeted drug delivery, they usually disintegrate rapidly in the body. Thus, sustained drug delivery from micellar nanocarriers is a challenge. This article summarizes various key strategies and underlying principles for sustained drug delivery using micellar nanocarriers. Comparisons are made with other competing delivery systems such as polymeric microparticles and nanoparticles. Amphiphilic molecules self-assemble in appropriate liquid media to form nanoscale micelles. Strategies for sustained release nanomicellar carriers include use of prodrugs, drug polymer conjugates, novel polymers with low critical micellar concentration or of a reverse thermoresponsive nature, reverse micelles, multi-layer micelles with layer by layer assembly, polymeric films capable of forming micelles in vivo and micelle coats on a solid support. These new micellar systems are promising for sustained drug delivery.

Biodegradable self-assembled PEG-PCL-PEG micelles for hydrophobic honokiol delivery: I. Preparation and characterization

This study aims to develop self-assembled poly(ethylene glycol)-poly(epsilon-caprolactone)-poly(ethylene glycol) (PEG-PCL-PEG, PECE) micelles to encapsulate hydrophobic honokiol (HK) in order to overcome its poor water solubility and to meet the requirement of intravenous administration. Honokiol loaded micelles (HK-micelles) were prepared by self-assembly of PECE copolymer in aqueous solution, triggered by its amphiphilic characteristic assisted by ultrasonication without any organic solvents, surfactants and vigorous stirring. The particle size of the prepared HK-micelles measured by Malvern laser particle size analyzer were 58 nm, which is small enough to be a candidate for an intravenous drug delivery system. Furthermore, the HK-micelles could be lyophilized into powder without any adjuvant, and the re-dissolved HK-micelles are stable and homogeneous with particle size about 61 nm. Furthermore, the in vitro release profile showed a significant difference between the rapid release of free HK and the much slower and sustained release of HK-micelles. Moreover, the cytotoxicity results of blank micelles and HK-micelles showed that the PECE micelle was a safe carrier and the encapsulated HK retained its potent antitumor effect. In short, the HK-micelles were successfully prepared by an improved method and might be promising carriers for intravenous delivery of HK in cancer chemotherapy, being effective, stable, safe (organic solvent and surfactant free), and easy to produce and scale up.

Self-Assembled Hydrogel Nanoparticles for Drug Delivery Applications

Hydrogel nanoparticles—also referred to as polymeric nanogels or macromolecular micelles—are emerging as promising drug carriers for therapeutic applications. These nanostructures hold versatility and properties suitable for the delivery of bioactive molecules, namely of biopharmaceuticals. This article reviews the latest developments in the use of self-assembled polymeric nanogels for drug delivery applications, including small molecular weight drugs, proteins, peptides, oligosaccharides, vaccines and nucleic acids. The materials and techniques used in the development of self-assembling nanogels are also described.