Genipin-crosslinked casein hydrogels for controlled drug delivery

Stabilizing interactions of casein microparticles after a thermal post-treatment

Casein microparticles from milk are important carrier materials for bioactive substances with stability and swelling properties that can be influenced by heat treatment. Microparticles produced by depletion flocculation and film drying remain stable in acidic media but swell and disintegrate under slightly alkaline conditions. Heat treatment after formation can stabilize the microparticles via a disulfide bridge network and newly formed hydrophobic contacts. Temperatures >60 °C are required so that denatured whey protein initiate formation of disulfide bridges via thiol exchange reactions. The particles then swell in a two-step process and exhibit an overshooting effect. If formation of disulphide bridges is prevented during heat treatment by adding N-methylmaleimide, overshooting swelling disappears and microparticles continue to expand instead. The analysis with parallel system dynamics models is based on the swelling of uncross-linked caseins, which is limited by the expansion capacity of cross-linked caseins.

Casein-based conjugates and graft copolymers. Synthesis, properties, and applications

Biobased natural polymers, including polymers of natural origin such as casein, are growing rapidly in the light of the environmental pollution caused by many mass-produced commercial synthetic polymers. Although casein has interesting intrinsic properties, especially for the food industry, numerous chemical reactions have been carried out to broaden the range of its properties, most of them preserving casein's nontoxicity and biodegradability. New conjugates and graft copolymers have been developed especially by Maillard reaction of the amine functions of the casein backbone with the aldehyde functions of sugars, polysaccharides, or other molecules. Carried out with dialdehydes, these reactions lead to the cross-linking of casein giving three-dimensional polymers. Acylation and polymerization of various monomers initiated by amine functions are also described. Other reactions, far less numerous, involve alcohol and carboxylic acid functions in casein. This review provides an overview of casein-based conjugates and graft copolymers, their properties, and potential applications.

Non-Invasive Delivery of Insulin for Breaching Hindrances against Diabetes

Insulin is recognized as a crucial weapon in managing diabetes. Subcutaneous (s.c.) injections are the traditional approach for insulin administration, which usually have many limitations. Numerous alternative (non-invasive) slants through different routes have been explored by the researchers for making needle-free delivery of insulin for attaining its augmented absorption as well as bioavailability. The current review delineating numerous pros and cons of several novel approaches of non-invasive insulin delivery by overcoming many of their hurdles. Primary information on the topic was gathered by searching scholarly articles from PubMed added with extraction of data from auxiliary manuscripts. Many approaches (discussed in the article) are meant for the delivery of a safe, effective, stable, and patient friendly administration of insulin via buccal, oral, inhalational, transdermal, intranasal, ocular, vaginal and rectal routes. Few of them have proven their clinical efficacy for maintaining the glycemic levels, whereas others are under the investigational pipe line. The developed products are comprising of many advanced micro/nano composite technologies and few of them might be entering into the market in near future, thereby garnishing the hopes of millions of diabetics who are under the network of s.c. insulin injections.

Characterization and Optimization of Injectable In Situ Crosslinked Chitosan-Genipin Hydrogels

In recent years, there has been an increased interest in injectable, in situ crosslinking hydrogels due to their minimally invasive application and ability to conform to their environment. Current in situ crosslinking chitosan hydrogels are either mechanically robust with poor biocompatibility and limited biodegradation due to toxic crosslinking agents or the hydrogels are mechanically weak and undergo biodegradation too rapidly due to insufficient crosslinking. Herein, the authors developed and characterized a thermally-driven, injectable chitosan-genipin hydrogel capable of in situ crosslinking at 37 °C that is mechanically robust, biodegradable, and maintain high biocompatibility. The natural crosslinker genipin is utilized as a thermally-driven, non-toxic crosslinking agent. The chitosan-genipin hydrogel's crosslinking kinetics, injectability, viscoelasticity, swelling and pH response, and biocompatibility against human keratinocyte cells are characterized. The developed chitosan-genipin hydrogels are successfully crosslinked at 37 °C, demonstrating temperature sensitivity. The hydrogels maintained a high percentage of swelling over several weeks before degrading in biologically relevant environments, demonstrating mechanical stability while remaining biodegradable. Long-term cell viability studies demonstrated that chitosan-genipin hydrogels have excellent biocompatibility over 7 days, including during the hydrogel crosslinking phase. Overall, these findings support the development of an injectable, in situ crosslinking chitosan-genipin hydrogel for minimally invasive biomedical applications.

A Brief Review on Cerium Oxide (CeO2NPs)-Based Scaffolds: Recent Advances in Wound Healing Applications

The process of wound healing is complex and involves the interaction of multiple cells, each with a distinct role in the inflammatory, proliferative, and remodeling phases. Chronic, nonhealing wounds may result from reduced fibroblast proliferation, angiogenesis, and cellular immunity, often associated with diabetes, hypertension, vascular deficits, immunological inadequacies, and chronic renal disease. Various strategies and methodologies have been explored to develop nanomaterials for wound-healing treatment. Several nanoparticles such as gold, silver, cerium oxide and zinc possess antibacterial properties, stability, and a high surface area that promotes efficient wound healing. In this review article, we investigate the effectiveness of cerium oxide nanoparticles (CeO₂NPs) in wound healing-particularly the effects of reducing inflammation, enhancing hemostasis and proliferation, and scavenging reactive oxygen species. The mechanism enables CeO₂NPs to reduce inflammation, modulate the immunological system, and promote angiogenesis and tissue regeneration. In addition, we investigate the efficacy of cerium oxide-based scaffolds in various wound-healing applications for creating a favorable wound-healing environment. Cerium oxide nanoparticles (CeO₂NPs) exhibit antioxidant, anti-inflammatory, and regenerative characteristics, enabling them to be ideal wound healing material. Investigations have shown that CeO₂NPs can stimulate wound closure, tissue regeneration, and scar reduction. CeO₂NPs may also reduce bacterial infections and boost wound-site immunity. However, additional study is needed to determine the safety and efficacy of CeO₂NPs in wound healing and their long-term impacts on human health and the environment. The review reveals that CeO₂NPs have promising wound-healing properties, but further study is needed to understand their mechanisms of action and ensure their safety and efficacy.

Antiseptic-Loaded Casein Hydrogels for Wound Dressings

Chronic wound treatment accounts for a substantial percentage of the medical expenses worldwide. Improving and developing novel wound care systems can potentially help to handle this problem. Wound dressings loaded with antiseptics may be an important tool for wound care, as they inhibit bacterial growth at the wound site. The goal of the present work was to investigate the potential of using casein hydrogel dressings loaded with two antiseptic drugs, Octiset^® or polyhexanide, to treat chronic wounds. Casein-based hydrogels are inexpensive and have several properties that make them suitable for biomedical applications. Two types of casein were used: casein sodium salt and acid casein, with the formulations being labelled CS and C, respectively. The hydrogels were characterised with respect to their physical properties (swelling capacity, water content, morphology, mechanical resistance, and stability), before and after sterilisation, and they showed adequate values for the intended application. The hydrogels of both formulations were able to sustain controlled drug-release for, at least, 48 h. They were demonstrated to be non-irritant, highly haemocompatible, and non-cytotoxic, and revealed good antimicrobial properties against Staphylococcus aureus and Pseudomonas aeruginosa. Steam-heat sterilisation did not compromise the material's properties. The in vivo performance of C hydrogel loaded with Octiset^® was evaluated in a case study with a dog. The efficient recovery of the wounds confirms its potential as an alternative for wound treatment. To our knowledge, this is the first time that wound dressings loaded with Octiset^®, one of the most efficient drugs for wound treatment, were prepared and tested.

Biobased polymer resources and essential oils: a green combination for antibacterial applications

To fight nosocomial infections, the excessive use of antibiotics has led to the emergence of multidrug-resistant microorganisms, which are now considered a relevant public health threat by the World Health Organization. To date, most antibacterial systems are based on the use of petro-sourced polymers, but the global supplies of these resources are depleting. Besides, silver NPs are widely accepted as the most active biocide against a wide range of bacterial strains but their toxicity is an issue. The growing interest in natural products has gained increasing interest in the last decade. Therefore, the design of functional antibacterial materials derived from biomass remains a significant challenge for the scientific community. Consequently, attention has shifted to naturally occurring substances such as essential oils (EOs), which are classified as Generally Recognized as Safe (GRAS). EOs can offer an alternative to the common antimicrobial agents as an inner solution or biocide agent to inhibit the resistance mechanism. Herein, this review not only aims at providing developments in the antibacterial modes of action of EOs against various bacterial strains and the recent advances in genomic and proteomic techniques for the elucidation of these mechanisms but also presents examples of biobased polymer resource-based EO materials and their antibacterial activities. Especially, we describe the antibacterial properties of biobased polymers, e.g. cellulose, starch, chitosan, PLA PHAs and proteins, associated with EOs (cinnamon (CEO), clove (CLEO), bergamot (BEO), ginger (GEO), lemongrass (LEO), caraway (CAEO), rosemary (REO), Eucalyptus globulus (EGEO), tea tree (TTEO), orange peel (OPEO) and apricot (Prunus armeniaca) kernel (AKEO) essential oils). Finally, we discuss the influence of EOs on the mechanical strength of bio-based materials.

Citrate effect on the swelling behaviour and stability of casein microparticles

Casein microparticles obtained from casein micelles by volume exclusion of added pectin and subsequent film drying remain stable in the acidic and neutral pH range, but swell strongly in the basic range. Calcium significantly impacts on the stability and water-binding behavior of phosphorylated caseins and the aggregates and gels formed from them. For a future effective and controlled use as a carrier for bioactive substances, e.g. via the gastrointestinal tract, we therefore investigated how the addition of the calcium chelating agent citrate affects the swelling and stability of the microparticles. Citrate concentrations of 2 mM and above cause a stronger swelling of the microparticles at pH 8, while above 4 mM the second characteristic swelling step starts earlier and thus can also be investigated within the observation time of 120 min. All swelling kinetics can be simulated using seven parameters of a dynamic model, which reproduces the individual swelling steps via volume inflows and outflows into a reservoir. While the rate coefficient for swelling step 1 increases linearly with citrate concentration, no such dependence could be found for swelling step 2. The more citrate is used, the faster the microparticles decompose in turbidity experiments after the addition of sodium dodecyl sulfate, which can be related to a weakening of the hydrophobic interactions.

Release of bioactive compounds from delivery systems by stimuli-responsive approaches; triggering factors, mechanisms, and applications

Recent advances in emerging nanocarriers and stimuli-responsive (SR) delivery systems have brought about a revolution in the food and pharmaceutical industries. SR carriers are able to release the encapsulated bioactive compounds (bioactives) upon an external trigger. The potential of releasing the loaded bioactives in site-specific is of great importance for the pharmaceutical industry and medicine that can deliver the cargo in an appropriate condition. For the food industry, release of encapsulated bioactives is considerably important in processing or storage of food products and can be used in their formulation or packaging. There are various stimuli to control the favorite release of bioactives. In this review, we will shed light on the effect of different stimuli such as temperature, humidity, pH, light, enzymatic hydrolysis, redox, and also multiple stimuli on the release of encapsulated cargo and their potential applications in the food and pharmaceutical industries. An overview of cargo release mechanisms is also discussed. Furthermore, various alternatives to manipulate the controlled release of bioactives from carriers and the perspective of more progress in these SR carriers are highlighted.

Recent progress in polymeric non-invasive insulin delivery

The design of carriers for insulin delivery has recently attracted major research attentions in the biomedical field. In general, the release of drug from polymers is driven via a variety of polymers. Several mechanisms such as matrix release, leaching of drug, swelling, and diffusion are usually adopted for the release of drug through polymers. Insulin is one of the most predominant therapeutic drugs for the treatment of both diabetes mellitus; type-I (insulin-dependent) and type II (insulin-independent). Currently, insulin is administered subcutaneously, which makes the patient feel discomfort, pain, hyperinsulinemia, allergic responses, lipodystrophy surrounding the injection area, and occurrence of miscarried glycemic control. Therefore, significant research interest has been focused on designing and developing new insulin delivery technologies to control blood glucose levels and time, which can enhance the patient compliance simultaneously through alternative routes as non-invasive insulin delivery. The aim of this review is to emphasize various non-invasive insulin delivery mechanisms including oral, transdermal, rectal, vaginal, ocular, and nasal. In addition, this review highlights different smart stimuli-responsive insulin delivery systems including glucose, pH, enzymes, near-infrared, ultrasound, magnetic and electric fields, and the application of various polymers as insulin carriers. Finally, the advantages, limitations, and the effect of each non-invasive route on insulin delivery are discussed in detail.

Protein-Based Systems for Topical Antibacterial Therapy

Recently, proteins are gaining attention as potential materials for antibacterial therapy. Proteins possess beneficial properties such as biocompatibility, biodegradability, low immunogenic response, ability to control drug release, and can act as protein-mimics in wound healing. Different plant- and animal-derived proteins can be developed into formulations (films, hydrogels, scaffolds, mats) for topical antibacterial therapy. The application areas for topical antibacterial therapy can be wide including bacterial infections in the skin (e.g., acne, wounds), eyelids, mouth, lips, etc. One of the major challenges of the healthcare system is chronic wound infections. Conventional treatment strategies for topical antibacterial therapy of infected wounds are inadequate, and the development of newer and optimized formulations is warranted. Therefore, this review focuses on recent advances in protein-based systems for topical antibacterial therapy in infected wounds. The opportunities and challenges of such protein-based systems along with their future prospects are discussed.

The Influence of Oxidant on Gelatin-Tannin Hydrogel Properties and Structure for Potential Biomedical Application

Nowadays, there is a widespread usage of sodium periodate as an oxidant for synthesizing gelatin-tannin hydrogels. The impact of iodine compounds could have a harmful effect on human health. The study focuses on the proposal of alternative oxidizing systems for tannin oxidation. Gelatin-tannin hydrogels were obtained based on the usage of H2O2/DMSO/KMnO4/KIO4 oxidants and characterized with sorption, thermal (TGA, DTG, DSC), mechanical, FTIR and other methods. The sorption experiments were carried out in a phosphate buffer (pH = 5.8/7.4/9) and distilled water and were investigated with Fick's law and pseudosecond order equation. The pH dependence of materials in acid media indicates the possibility of further usage as stimuli-responsive systems for drug delivery. Thermal transitions demonstrate the variation of structure with melting (306 ÷ 319 °C) and glass transition temperatures (261 ÷ 301 °C). The activation energy of water evaporation was calculated by isoconversional methods (Kissinger-Akahira-Sunose, Flynn-Wall-Ozawa) ranging from 4 ÷ 18 to 14 ÷ 38 kJ/mole and model-fitting (Coats-Redfern, Kennedy-Clark) methods at 24.7 ÷ 45.3 kJ/mole, indicating the smooth growth of values with extent of conversion. The network parameters of the hydrogels were established by modified Flory-Rehner and rubber elasticity theories, which demonstrated differences in values (5.96 ÷ 21.27·10-3 mol/cm3), suggesting the limitations of theories. The sorption capacity, tensile strength and permeability for water/oxygen indicate that these materials may find their application in field of biomaterials.

Proteins from Agri-Food Industrial Biowastes or Co-Products and Their Applications as Green Materials

A great amount of biowastes, comprising byproducts and biomass wastes, is originated yearly from the agri-food industry. These biowastes are commonly rich in proteins and polysaccharides and are mainly discarded or used for animal feeding. As regulations aim to shift from a fossil-based to a bio-based circular economy model, biowastes are also being employed for producing bio-based materials. This may involve their use in high-value applications and therefore a remarkable revalorization of those resources. The present review summarizes the main sources of protein from biowastes and co-products of the agri-food industry (i.e., wheat gluten, potato, zein, soy, rapeseed, sunflower, protein, casein, whey, blood, gelatin, collagen, keratin, and algae protein concentrates), assessing the bioplastic application (i.e., food packaging and coating, controlled release of active agents, absorbent and superabsorbent materials, agriculture, and scaffolds) for which they have been more extensively produced. The most common wet and dry processes to produce protein-based materials are also described (i.e., compression molding, injection molding, extrusion, 3D-printing, casting, and electrospinning), as well as the main characterization techniques (i.e., mechanical and rheological properties, tensile strength tests, rheological tests, thermal characterization, and optical properties). In this sense, the strategy of producing materials from biowastes to be used in agricultural applications, which converge with the zero-waste approach, seems to be remarkably attractive from a sustainability prospect (including environmental, economic, and social angles). This approach allows envisioning a reduction of some of the impacts along the product life cycle, contributing to tackling the transition toward a circular economy.

Biocompatible magnetic gelatin nanoparticles with enhanced MRI contrast performance prepared by single-step desolvation method

Magnetic nanoparticles are versatile materials that have boosted the development of different biomedical applications, being superparamagnetic magnetite nanoparticles a milestone in the field, after achieving clinical approval as contrast agents in magnetic resonance imaging (Feridex®), magnetic hyperthermia agents for oncological treatments (NanoTherm®), or iron deficiency supplement (Feraheme®). However, its potential as theragnostic agent could be further expanded by its encapsulation within a biodegradable hydrogel, capable of enhancing the biocompatibility and loading abilities, to simultaneously carry drugs, radiotracers, or biomolecules. Gelatin, is a natural biopolymer with optimal in vivo feature and gelling capacity that has been extensively used for decades in pharmaceuticals. In this work, we have addressed the preparation of gelatin nanoparticles, bare and loaded with magnetite nanoparticles, with controlled size to be used as contrast agents in magnetic resonance imaging. The main formulation parameters influencing the preparation of gelatin nanoparticles with controlled size by single-step desolvation method, were studied and optimized, to produce small gelatin nanoparticles (97nm) and highly loaded (38% w/w) Fe3O4@citrate gelatin nanoparticles (150 nm) with high magnetic response (65emus/g). The viability assays of the magnetic gelatin nanoparticles, tested with mesenchymal stem cells, showed negligible toxicity and in vitro magnetic resonance imaging tests, performed in agar phantoms, revealed a good contrast for T2 weighting MRI, r2 = 265.5(mM−1 s−1), superior to commercial products, such as Resovist or Endorem.

Gelatin Hydrogels Loaded with Lactoferrin-Functionalized Bio-Nanosilver as a Potential Antibacterial and Anti-Biofilm Dressing for Infected Wounds: Synthesis, Characterization, and Deciphering of Cytotoxicity

Gelatin hydrogels are attractive for wound applications owing to their well-defined structural, physical, and chemical properties as well as good cell adhesion and biocompatibility. This study aimed to develop gelatin hydrogels incorporated with bio-nanosilver functionalized with lactoferrin (Ag-LTF) as a dual-antimicrobial action dressing, to be used in treating infected wounds. The hydrogels were cross-linked using genipin prior to loading with Ag-LTF and characterized for their physical and swelling properties, rheology, polymer and actives interactions, and in vitro release of the actives. The hydrogel's anti-biofilm and antibacterial performances against S. aureus and P. aeruginosa as well as their cytotoxicity effects were assessed in vitro, including primary wound healing gene expression of human dermal fibroblasts (HDFs). The formulated hydrogels showed adequate release of AgNPs and LTF, with promising antimicrobial effects against both bacterial strains. The Ag-LTF-loaded hydrogel did not significantly interfere with the normal cellular functions as no alteration was detected for cell viability, migration rate, and expression of the target genes, suggesting the nontoxicity of Ag-LTF as well as the hydrogels. In conclusion, Ag-LTF-loaded genipin-cross-linked gelatin hydrogel was successfully synthesized as a new approach for fighting biofilms in infected wounds, which may be applied to accelerate healing of chronic wounds.

Genipin-cross-linked hydrogels based on biomaterials for drug delivery: a review

Genipin is a naturally occurring nontoxic cross-linker, which has been widely used for drug delivery due to its excellent biocompatibility, admirable biodegradability and stable cross-linked attributes. These advantages led to its extensive application in the fabrication of hydrogels for drug delivery. This review describes the physicochemical characteristics and pharmacological activities of genipin and attempts to elucidate the detailed mechanisms of the cross-linking reaction between genipin and biomaterials. The current article entails a general review of the different biomaterials cross-linked by genipin: chitosan and its derivatives, collagen, gelatin, etc. The genipin-cross-linked hydrogels for various pharmaceutical applications, including ocular drug delivery, buccal drug delivery, oral drug delivery, anti-inflammatory drug delivery, and antibiotic and antifungal drug delivery, are reported. Finally, the future research directions and challenges of genipin-cross-linked hydrogels for pharmaceutical applications are also discussed in this review.

Biosynthesized silver nanoparticles loaded in gelatine hydrogel for a natural antibacterial and anti-biofilm wound dressing

Antibiotic-resistance and bacterial bioburden are the threats to wound healing. Nanoparticles are a revolutionary advancement in nanomedicine owing to their antibacterial properties, to be used as a promising alternative to antibiotics. A wound dressing with antibacterial and anti-biofilm effects may be a plausible strategy in curbing wound exacerbation caused by bacterial infection. Silver nanoparticles (AgNPs) are known for their excellent antibacterial activity. In present study, biosynthesized AgNPs using spent mushroom substrate (SMS) as reducing agent while chitosan as stabilizing agent were successfully produced. The nanoparticles exhibited considerable antibacterial and anti-biofilm activities with higher sensitivity towards Gram-negative bacteria. These AgNPs were later incorporated into genipin-crosslinked gelatine hydrogels as a wound dressing. The hydrogels were characterized for their physical, rheological and swelling properties, besides in vitro release of AgNPs. The formulated hydrogels demonstrated an adequate release of the AgNPs with acceptable physical, rheological and swelling properties, suitable as a vehicle for wound drug delivery. The antibacterial and anti-biofilm of the hydrogels against Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa and Escherichia coli were effective in inhibiting the growth of the selected bacteria with minimum inhibitory concentration (MIC) of 63 μg/mL. In summary, genipin-crosslinked gelatine hydrogels loaded with the AgNPs are a promising anti-microbial wound dressing, a potential strategy for combating biofilm of wound infections and accelerating healing.

Decoupling diffusion and macromolecular relaxation in the release of vitamin B6 from genipin-crosslinked whey protein networks

This study examined the release of vitamin B6 from a hydrogel made of whey protein isolate (WPI). Work was carried out at ambient temperature without preheating the whey protein. Native-state macromolecules were crosslinked with a nontoxic compound, genipin. Experimentation included a ninhydrin assay with UV-vis absorbance, FTIR, ¹³C NMR, compression testing, SEM imaging, WPI matrix swelling and vitamin release protocols. It was confirmed that geninin crosslinked effectively the protein chains whose network strength was reinforced with increasing crosslinker concentrations. The modified Flory-Rehner theory predicted the molecular weight between crosslinks, network mesh size and crosslinking density in the swollen WPI gels as a function of added crosslinker. Transport patterns of vitamin B6 through the polymeric matrix were monitored over prolonged periods of observation. These were examined with the generalised Fick's equation and the Peppas-Sahlin equation to unveil the interplay between diffusion and relaxation dynamics in the anomalous transport of the bioactive compound.

Partitioning Behavior and Interfacial Activity of Phenolic Acid Derivatives and their Impact on β-Lactoglobulin at the Oil-Water Interface

Proteins are able to stabilize dispersed food systems due to their amphiphilic nature, acting as emulsifiers. Their interfacial properties can be influenced by different methods, including the formation of protein-phenol nanocomplexes. In this study, the interfacial behavior of phenolic compounds and protein-phenol nanocomplexes was first characterized according to the oil-water partitioning behavior of phenolic acid derivatives according to their molecular structure and its impact on interfacial tension. The influence of the phenolic compounds on protein film formation and its properties by dilatational rheology was then evaluated. The most phenolic acid derivatives are predominantly present in the aqueous phase. Despite their hydrophobic benzene body, weak interfacial activity was observed depending on their chemical structure. This result supports possible protein-phenol nanocomplex formation in the aqueous phase and possible interactions at the oil-water interface. Protein-phenol nanocomplexes showed decreased interfacial adsorption properties and decreased viscoelastic interfacial behavior, depending on the expansion of the delocalized π-electrons in the phenol.

BMP-6 carrying metal organic framework-embedded in bioresorbable electrospun fibers for enhanced bone regeneration

Biomolecule carrier structures have attracted substantial interest owing to their potential utilizations in the field of bone tissue engineering. In this study, MOF-embedded electrospun fiber scaffold for the controlled release of BMP-6 was developed for the first time, to enrich bone regeneration efficacy. The scaffolds were achieved by first, one-pot rapid crystallization of BMP-6 encapsulated ZIF-8 nanocrystals-as a novel carrier for growth factor molecules- and then electrospinning of the blending solution composed of poly (ε-caprolactone) and BMP-6 encapsulated ZIF-8 nanocrystals. BMP-6 molecule encapsulation efficiency for ZIF-8 nanocrystals was calculated as 98%. The in-vitro studies showed that, the bioactivity of BMP-6 was preserved and the release lasted up to 30 days. The release kinetics fitted the Korsmeyer-Peppas model exhibiting a pseudo-Fickian behavior. The in-vitro osteogenesis studies revealed the superior effect of sustained release of BMP-6 towards osteogenic differentiation of MC3T3-E1 pre-osteoblasts. In-vivo studies also revealed that the sustained slow release of BMP-6 was responsible for the generation of well-mineralized, new bone formation in a rat cranial defect. Our results proved that; MOF-carriers embedded in electrospun scaffolds can be used as an effective platform for bone regeneration in bone tissue engineering applications. The proposed approach can easily be adapted for various growth factor molecules for different tissue engineering applications.

Recent trends in protein and peptide-based biomaterials for advanced drug delivery

Engineering protein and peptide-based materials for drug delivery applications has gained momentum due to their biochemical and biophysical properties over synthetic materials, including biocompatibility, ease of synthesis and purification, tunability, scalability, and lack of toxicity. These biomolecules have been used to develop a host of drug delivery platforms, such as peptide- and protein-drug conjugates, injectable particles, and drug depots to deliver small molecule drugs, therapeutic proteins, and nucleic acids. In this review, we discuss progress in engineering the architecture and biological functions of peptide-based biomaterials -naturally derived, chemically synthesized and recombinant- with a focus on the molecular features that modulate their structure-function relationships for drug delivery.

Casein-based hydrogels: A mini-review

Casein-based hydrogels are biocompatible, biodegradable, renewable, easy to obtain, inexpensive, and non-toxic. They exist in different physicochemical states, e.g. particle hydrogels, which can be dived in suspensions or emulsions and macro hydrogels that are gel colloid type. These biomaterials have drawn increasing attention in recent years due to their abilities to form networks of different tensile strengths and to encapsulate, protect and release biomolecules. This mini-review outlines the recent advances in casein-based hydrogel research and the uses of casein-based hydrogels as drug delivery system for both hydrophobic and hydrophilic molecules. The food and biomedical potential along with possible future uses of the casein-based hydrogels are discussed throughout the document.

Cellulose Nanofibers and Other Biopolymers for Biomedical Applications. A Review

Biopolymers are materials synthesised or derived from natural sources, such as plants, animals, microorganisms or any other living organism. The use of these polymers has grown significantly in recent years as industry shifts away from unsustainable fossil fuel resources and looks towards a softer and more sustainable environmental approach. This review article covers the main classes of biopolymers: Polysaccharides, proteins, microbial-derived and lignin. In addition, an overview of the leading biomedical applications of biopolymers is also provided, which includes tissue engineering, medical implants, wound dressings, and the delivery of bioactive molecules. The future clinical applications of biopolymers are vast, due to their inherent biocompatibility, biodegradability and low immunogenicity. All properties which their synthetic counterparts do not share.

Application of Protein-Based Films and Coatings for Food Packaging: A Review

As the IV generation of packaging, biopolymers, with the advantages of biodegradability, process ability, combination possibilities and no pollution to food, have become the leading food packaging materials. Biopolymers can be directly extracted from biomass, synthesized from bioderived monomers and produced directly by microorganisms which are all abundant and renewable. The raw materials used to produce biopolymers are low-cost, some even coming from agrion dustrial waste. This review summarized the advances in protein-based films and coatings for food packaging. The materials studied to develop protein-based packaging films and coatings can be divided into two classes: plant proteins and animal proteins. Parts of proteins are referred in this review, including plant proteins i.e., gluten, soy proteins and zein, and animal proteins i.e., casein, whey and gelatin. Films and coatings based on these proteins have excellent gas barrier properties and satisfactory mechanical properties. However, the hydrophilicity of proteins makes the protein-based films present poor water barrier characteristics. The application of plasticizers and the corresponding post-treatments can make the properties of the protein-based films and coatings improved. The addition of active compounds into protein-based films can effectively inhibit or delay the growth of microorganisms and the oxidation of lipids. The review also summarized the research about the storage requirements of various foods that can provide corresponding guidance for the preparation of food packaging materials. Numerous application examples of protein-based films and coatings in food packaging also confirm their important role in food packaging materials.

Genipin-Aided Protein Cross-linking to Modify Structural and Rheological Properties of Emulsion-Filled Hempseed Protein Hydrogels

Genipin, a natural electrophilic cross-linker, was applied (5, 10, 20, and 30 mM) to modify hempseed protein isolate (HPI). Genipin treatments resulted in general losses of total sulfhydryls (up to 2.9 nmol/mg) and free amines (up to 77.3 nmol/mg). Surface hydrophobicity decreased by nearly 90% with 30 mM genipin, corresponding to similar tryptophan fluorescence quenching. The genipin treatment converted HPI into highly cross-linked polymers. Hydrogels formed with such polymers when also incorporated with hemp oil emulsions exhibited substantially enhanced gelling ability: up to 3.3- and 2.6-fold increases, respectively, in gel strength and gel elasticity over genipin-untreated protein. The genipin-modified composite gels also exhibited superior water-holding capacity. Microstructural analysis revealed a compact gel network filled with protein-coated oil globules that interacted intimately with the protein matrix when treated with genipin. Such gels remained readily digestible. Hence, genipin-treated hemp protein hydrogels show promise as functional food components.

Natural product-based nanoformulations for cancer therapy: Opportunities and challenges

Application of natural product-based nanoformulations for the treatment of different human diseases, such as cancer, is an emerging field. The conventional cancer therapeutic modalities, including surgery, chemotherapy, immunotherapy, radiotherapy has limited achievements. A larger number of drawbacks are associated with these therapies, including damage to proliferating healthy tissues, structural deformities, systemic toxicity, long-term side effects, resistance to the drug by tumor cells, and psychological problems. The advent of nanotechnology in cancer therapeutics is recent; however, it has progressed and transformed the field of cancer treatment at a rapid rate. Nanotherapeutics have promisingly overcome the limitations of conventional drug delivery system, i.e., low aqueous solubility, low bioavailability, multidrug resistance, and non-specificity. Specifically, natural product-based nanoformulations are being intentionally studied in different model systems. Where it is found that these nanoformulations has more proximity and reduced side effects. The nanoparticles can specifically target tumor cells, enhancing the specificity and efficacy of cancer therapeutic modalities which in turn improves patient response and survival. The integration of phytotherapy and nanotechnology in the clinical setting may improve pharmacological response and better clinical outcome of patients.

Interactions of Casein and Polypeptides in Multilayer Films Studied by FTIR and Molecular Dynamics

Multilayer films containing α- and β-casein and polypeptides, poly-L-lysine (PLL), and poly-L-arginine (PLArg) were formed by the layer-by-layer technique and Fourier Transform InfraRed spectroscopy with Attenuated Total Reflection (FTIR-ATR) and FTIR/Grazing Angle analyzed their infrared spectra. We investigated the changes of conformations of casein and polypeptides in the complexes formed during the build-up of the films. To elucidate the differences in the mechanism of complex formation leading to various growths of (PLL/casein)_n and (PLArg/casein)_n films, we performed the molecular dynamics simulations of the systems consisting of short PLL and PLArg chains and the representative peptide chains—casein fragments, which consists of several aminoacid sequences. The results of the simulation indicated the preferential formation of hydrogen bonds of poly-L-arginine with phosphoserine and glutamic acid residues of caseins. FTIR spectra confirmed those, which revealed greater conformational changes during the formation of casein complex with poly-L-arginine than with poly-L-lysine resulting from stronger interactions, which was also reflected in the bigger growth of (PLArg/casein)_n films with the number of deposited layers.

Preparation and characterization of homogeneous and enhanced casein protein-based composite films via incorporating cellulose microgel

Gelatin-coupled cellulose (GCC) microgel with whisker-like structure is prepared and used to incorporate into casein (CA) matrix to construct reinforced CA-based composite films by solution casting. The GCC microgel has excellent dispersibility and stability in water, which contributes to the hydrophobicity and significantly reduces the moisture absorption of the composite films, as well as a decrease in the water vapor permeability with an increase of GCC content at different relative humidity is also observed. Compared with pure casein material, the resultant CA-based composite films show more homogeneous and dense cross-sectional structure, and the cleavage temperature of the hydrogen bonds increases by 16 °C. In particular, their tensile strength and Young’s modulus increase by 6 and 3.5 times, respectively. These indicators are superior to that of the nanoparticle enhanced CA-based composite film. Moreover, the light transmittance of the CA-based films at 550 nm is about 88% when GCC content is higher than 9%. The above results could be attributed to the strong hydrogen bonds formed between GCC components and CA matrix, as further confirmed by fourier transform infrared spectra and X-ray diffraction analysis.