Wheat germ agglutinin-conjugated chitosan–Ca–alginate microparticles for local colon delivery of 5-FU: Development and in vitro characterization

Preparation and sustained release of diatomite incorporated and Eudragit L100 coated hydroxypropyl cellulose/chitosan aerogel microspheres

The drug encapsulation efficiency, release rate and time, sustained release, and stimulus-response of carriers are very important for drug delivery. However, these always cannot obtained for the carrier with a single component. To improve the comprehensive performance of chitosan-based carriers for 5-Fu delivery, diatomite-incorporated hydroxypropyl cellulose/chitosan (DE/HPC/CS) composite aerogel microspheres were fabricated for the release of 5-fluorouracil (5-Fu), and the release performance was regulated with the content of diatomite, pH value, and external coating material. Firstly, the 5-Fu loaded DE/HPC/CS composite aerogel microspheres and Eudragit L100 coated microspheres were prepared with cross-linking followed by freeze-drying, and characterized by SEM, EDS, FTIR, XRD, DSC, TG, and swelling. The obtained aerogel microspheres have a diameter of about 0.5 mm, the weight percentage of F and Si elements on the surface are 0.55 % and 0.78 % respectively. The glass transition temperature increased from 179 °C to 181 °C and 185 °C with the incorporation of DE and coating of Eudragit, and the equilibrium swelling percentage of DE/HPC/CS (1.5:3:2) carriers are 101.52 %, 45.27 %, 67.32 % at pH 1.2, 5.0, 7.4, respectively. Then, the effect of DE content on the drug loading efficiency of DE/HPC/CS@5-Fu was investigated, with the increase of DE content, the highest encapsulation efficiency was 82.6 %. Finally, the release behavior of DE incorporated and Eudragit L100 Coated microspheres were investigated under different pH values, and evaluated with four kinetic models. The results revealed that the release rate of 5-Fu decreased with the increase of DE content, sustained release with extending time and pH-responsive were observed for the Eudragit-coated aerogel microspheres.

Wheat germ agglutinin conjugated chitosan nanoparticles for gemcitabine delivery in MCF-7 cells; synthesis, characterisation and in vitro cytotoxicity studies

OBJECTIVE AND AIM

Numerous clinical trials indicated combination regimens containing gemcitabine could extend progression-free survival of breast cancer patients without increasing the incidence of serious adverse effects. Orally administered gemcitabine is being metabolized by enzymes present in intestinal cells rapidly; thereupon, the current study was aimed to preparing, optimizing, and evaluating cytotoxicity of wheat germ agglutinin conjugated gemcitabine-chitosan nanoparticles (WGA-Gem-CNPs) in MCF-7 and HEK293 cells and to determining their cellular uptake by Caco-2 cells.

METHODS

Gem-CNPs were prepared by Ionic Gelation method and optimum formulation was implied for WGA conjugation optimisation. Nanoparticles formation was approved by FTIR and DSC analyses; then particles were characterized by DLS and release profile was prepared. MTT assay was performed in MCF-7 and HEK293.

RESULTS

Optimized Gem-CNPs and WGA-Gem-CNPs particle size were estimated as 126.6 ± 21.8 and 144.8 ± 36.1 nm, respectively. WGA conjugation efficacy was calculated as 50.98 ± 2.32 percent and encapsulation efficiency in WGA-Gem-CNPs was 69.44 ± 3.41 percent. Three-hour Caco-2 cellular uptake from Gem-CNPs and WGA-Gem-CNPs were estimated as averagely 3.5 and 4.5 folds higher than free drug, respectively. Gem-CNPs and WGA-Gem-CNPs reduced IC50 in MCF-7 cells by 2 and 2.5 folds, respectively; such decrease for HEK293 cells was as much as 2.4 and 6.3 folds, in same order.

CONCLUSION

Demonstrated significant in vitro uptake of WGA-Gem-CNPs and cytotoxicity might be considered for more studies as a potential carrier for oral delivery of gemcitabine.

Reversal mechanism of multidrug-resistant cancer cells by lectin as chemo-adjuvant and targeted therapy- a systematic review

BACKGROUND

Cancer is characterized as the leading cause of death, and the susceptibility of cancer cells to develop resistance due to long-term exposure to complementary chemotherapeutic treatment is referred to as multidrug resistance cancer cells (MDRC), which is a significant obstacle in the treatment of malignancies. Since complementary medicine lost its effectiveness, the development of potential alternative and novel therapeutic approaches has been elevated to a top priority in recent years. In this context, a bioactive protein lectin from plant and animal sources exhibits an invaluable source of anticancer agents with vast therapeutic potential.

PURPOSE

This manuscript's primary purpose is to enlighten the evidence-based (from 1986 to 2022) possible molecular mechanism of alternative treatment approaches using lectins over the complementary medicines used for cancer treatment.

METHODS

The PRISMA rules have been followed properly and qualitative and quantitative data are synthesized systematically. Articles were identified based on Clinical and preclinical reports published on lectin that investigated the in-depth cellular mechanisms, of reverse drug integrative oncology, as a nano-carried targeted delivery. Articles were systematically screened from 1986 to 2022 and selected based on electronic database searches, Medline (PubMed), Google Scholar, Web of Science, Encyclopaedias, Scopus, and ClinicalTrials.gov database.

RESULTS

The search turned up 4,212 publications from 38 different nations, of which 170 reference articles were used in our analysis, in 16 combination therapy and their mode of action, and 27 clinical trial studies including dosage and mechanism of action were included. Reports from the 30 lectins belonging to 28 different families have been included. The reversal mechanism of lectin and alternative therapy against MDRC is critically screened and according to a few clinical and preclinical reports, lectin can suppress the overexpressing genes like P-53, EGFR, and P-gp, MRP, and ABC transporter proteins associated with intracellular transportation of drugs. Since, the drug efflux mechanism leads to MDRC, in this phenomenon, lectin plays a key role in reversing the efflux mechanism. Few preclinical reports have mentioned that lectin shows synergism in combination with complementary medicine and as a nano drug carrier helps to deliver to the targeted site.

CONCLUSION

We have discussed the alternative therapy using lectin and an in-depth insight into the reversal drug resistance mechanisms to combat MDRC cancer, enhance the efficacy, reduce toxicity and adverse events, and ensure targeted delivery, and their application in the field of cancer diagnosis and prognosis has been discussed. However, further investigation is necessary in drug development and clinical trials which could be helpful to elaborate the reversal mechanism and unlock newer treatment modalities in MDRC cancer.

Engineered microparticles of hyaluronic acid hydrogel for controlled pulmonary release of salbutamol sulphate

Most pulmonary drugs are immediate-release formulations with short duration of action. Controlled release systems provide the ability to deliver drugs at a controlled rate, which helps maintain drug concentrations within the therapeutic window for a longer period of time. This study aimed to produce microparticles (MPs) of hyaluronic acid hydrogel (HAGA) loaded with salbutamol sulphate (SS) for controlled release in the lung. The drug-loaded MPs were prepared via spray drying and underwent extensive characterization, which revealed that SS was successfully encapsulated in the HAGA matrix. The prepared MPs (denoted as HASS) ranged in size from 1.6 ± 0.4 μm to 1.7 ± 0.5 μm with a fine particle fraction (FPF) of 48-56% and showed improvement in aerodynamic properties compared to unloaded HAGA hydrogel MPs. In vitro drug release studies performed in a Transwell system confirmed the potential of the particles to release the drug in a sustained manner. The drug release was delayed for all formulations, with a t63 between 5 and 30 min, compared to <1min for pure SS. This study advances our understanding of the formulation of a highly soluble drug to achieve controlled release in the lung.

Carbohydrate Polymer-Based Targeted Pharmaceutical Formulations for Colorectal Cancer: Systematic Review of the Literature

Colon cancer is the third most diagnosed cancer worldwide, followed by lung and breast cancer. Conventional treatment methods are associated with numerous side effects and compliance issues. Thus, colon targeted drug delivery has gained much attention due to its evident advantages. Although many technologies have been explored, the use of pH-sensitive polymers, especially biodegradable polymers, holds exceptional promise. This review aims to collate research articles concerning recent advances in this area. A systematic search using multiple databases (Google Scholar, EMBASE, PubMed, MEDLINE and Scopus) was carried out following the preferred reported items for systematic reviews and meta-analyses (PRISMA) guidelines with an aim to explore the use of pH-sensitive carbohydrate polymers in developing colon targeted pharmaceutical formulations. Following screening and quality assessment for eligibility, 42 studies were included, exploring either single or a combination of carbohydrate polymers to develop targeted formulations for colon cancer therapy. Pectin (11) is the most widely used of these biopolymers, followed by chitosan (09), alginate (09) and guar gum (08). This systematic review has successfully gathered experimental evidence highlighting the importance of employing carbohydrate polymers in developing targeting formulations to manage colon cancer.

Application of chitosan/alginate nanoparticle in oral drug delivery systems: prospects and challenges

Oral drug delivery systems (ODDSs) have various advantages of simple operation and few side effects. ODDSs are highly desirable for colon-targeted therapy (e.g. ulcerative colitis and colorectal cancer), as they improve therapeutic efficiency and reduce systemic toxicity. Chitosan/alginate nanoparticles (CANPs) show strong electrostatic interaction between the carboxyl group of alginates and the amino group of chitosan which leads to shrinkage and gel formation at low pH, thereby protecting the drugs from the gastrointestinal tract (GIT) and aggressive gastric environment. Meanwhile, CANPs as biocompatible polymer, show intestinal mucosal adhesion, which could extend the retention time of drugs on inflammatory sites. Recently, CANPs have attracted increasing interest as colon-targeted oral drug delivery system for intestinal diseases. The purpose of this review is to summarize the application and treatment of CANPs in intestinal diseases and insulin delivery. And then provide a future perspective of the potential and development direction of CANPs as colon-targeted ODDSs.

Effect of Formulation Variables for the Production of WGA-Grafted, Levodopa-Loaded PLGA Nanoparticles

Levodopa is used for the treatment of Parkinson’s disease (PD) for the last few decades. However, adverse reactions such as dyskinesia, somnolence, nausea, itching, rash, as well as the need for frequent dosing and low bioavailability problems affect the success of the treatment. To prevent side effects caused by conventional therapy, a nanoparticular drug delivery system has been developed, in which receptors are constantly stimulated, and the frequency of dosing is reduced. In this study, levodopa was loaded in Poly lactic-co-glycolic acid (PLGA) nanoparticles (NP) which modified with Wheat Germ Agglutinin (WGA) To increase the effectiveness of levodopa, reduce its side effects and apply to the nasal area which is an alternative way for brain targeting with lower doses. To obtain the optimum levodopa loaded PLGA nanoparticles, the effect of some formulation variables such as polyvinyl alcohol (PVA) concentration, homogenization speed, polymer amount and molecular weight, and levodopa content on the entrapment efficiency (EE) and particle size of the nanoparticles were investigated. Besides these variables, the effect of different parameters on the WGA binding constant was also searched. In addition to in vitro release studies, Differential Scanning Calorimetry (DSC) and Fourier Transform Infrared Spectrophotometer (FT-IR), and Transmission electron microscopy (TEM) analysis were used in the characterization of nanoparticles. Among all formulations, A2 and A8a which was produced with different molcular weights of PLGA, different added levodopa amounts and with different homogenization speeds were chosen as optimum formulations due to their sustained release properties and the ability to release 80 % of their drug content.WGA binding constant was found 78.20 % for A8a-1 and 95 % for A2-1. In this study, we aimed to determine the effect of different formulation parameters on the development of levodopa loaded and WGA grafted PLGA nanoparticles and on the quality characteristics of nanoparticle formulations such as particle size, zeta potential, and EE. In this paper, our results are demonstrated for a better understanding of the effect of process parameters on the development of nanoparticle-based drug delivery systems by using the double-emulsion solvent evaporation technique and on WGA binding of drug-loaded PLGA nanoparticles.

Oral delivery of micro/nanoparticulate systems based on natural polysaccharides for intestinal diseases therapy: Challenges, advances and future perspectives

Colon-targeted oral delivery of drugs remains as an appealing and promising approach for the treatment of prevalent intestinal diseases (ID), such as inflammatory bowel disease (IBD) and colorectal cancer (CRC). Notwithstanding, there are numerous challenges to effective drug delivery to the colon, which requires the design of advanced strategies. Micro- and nanoparticles have received great attention as colon-targeted delivery platforms due to their reduced size and structural composition that favors the accumulation and/or residence time of drugs at the site of action and/or absorption, contributing to localized therapy. The choice by natural polysaccharides imparts key properties and advantages to the nano-in-microparticulate systems to effective colon-specific oral delivery. This review proposes to discuss the physiological barriers imposed by the gastrointestinal tract (GIT) against oral administration of drugs, as well as pathological factors and challenges of the ID for oral delivery of colon-targeted systems. We then provide an updated progress about polysaccharides-based colon-targeted drug delivery systems, including microparticulate, nanoparticulate and nano-in-microparticulate systems, highlighting their key properties, advantages and limitations to achieving targeted delivery and efficacious therapy within the colon. Lastly, we provide future perspectives, towards advances in the field and clinical translation of colon-targeted oral delivery systems for ID therapy.

Wheat Germ Agglutinin-Conjugated Disulfide Cross-Linked Alginate Nanoparticles as a Docetaxel Carrier for Colon Cancer Therapy

PURPOSE

In chemotherapy, oral administration of drug is limited due to lack of drug specificity for localized colon cancer cells. The inability of drugs to differentiate cancer cells from normal cells induces side effects. Colonic targeting with polymeric nanoparticulate drug delivery offers high potential strategies for delivering hydrophobic drugs and fewer side effects to the target site. Disulfide cross-linked polymers have recently acquired high significance due to their potential to degrade in reducing colon conditions while resisting the upper gastrointestinal tract's hostile environment. The goal of this project is, therefore, to develop pH-sensitive and redox-responsive fluorescein-labeled wheat germ agglutinin (fWGA)-mounted disulfide cross-linked alginate nanoparticles (fDTP2) directly targeting docetaxel (DTX) in colon cancer cells.

METHODS

fDTP2 was prepared by mounting fWGA on DTX-loaded nanoparticles (DTP2) using the two-step carbodiimide method. Morphology of fDTP2 was examined using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Dynamic light scattering (DLS) study was carried out to determine the mean diameter, polydispersity index (PDI) and zeta potential of fDTP2. Cellular uptake efficiency was examined using fluorescence microplate reader. Biocompatibility and active internalization of fDTP2 were conducted on HT-29.

RESULTS

fDTP2 was found to exhibit a DTX loading efficiency of 19.3%. SEM and TEM tests revealed spherical nanoparticles. The in vitro DTX release test showed a cumulative release of 54.7%. From the DLS study, fDTP2 reported a 277.7 nm mean diameter with PDI below 0.35 and -1.0 mV zeta potential. HT-29 which was fDTP2-treated demonstrated lower viability than L929 with a half maximal inhibitory concentration (IC50) of 34.7 µg/mL. HT-29 (33.4%) internalized fDTP2 efficiently at 2 h incubation. The study on HT-29 active internalization of nanoparticles through fluorescence and confocal imaging indicated such.

CONCLUSION

In short, fDTP2 demonstrated promise as a colonic drug delivery DTX transporter.

Docetaxel-Loaded Disulfide Cross-Linked Nanoparticles Derived from Thiolated Sodium Alginate for Colon Cancer Drug Delivery

In this study, fluorescein-labelled wheat germ agglutinin (fWGA)-conjugated disulfide cross-linked sodium alginate nanoparticles were developed to specifically target docetaxel (DTX) to colon cancer cells. Different amounts of 3-mercaptopropionic acid (MPA) were covalently attached to sodium alginate to form thiolated sodium alginate (MPA1-5). These polymers were then self-assembled and air-oxidised to form disulfide cross-linked nanoparticles (MP1-5) under sonication. DTX was successfully loaded into the resulting MP1-5 to form DTX-loaded nanoparticles (DMP1-5). DMP2 had the highest loading efficiency (17.8%), thus was chosen for fWGA surface conjugation to form fWGA-conjugated nanoparticles (fDMP2) with a conjugation efficiency of 14.1%. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) analyses showed spherical nanoparticles, and an in vitro drug release study recorded a cumulative drug release of 48.6%. Dynamic light scattering (DLS) analysis revealed a mean diameter (MD) of 289 nm with a polydispersity index (PDI) of 0.3 and a zeta potential of -2.2 mV for fDMP2. HT-29 human colon cancer cells treated with fDMP2 showed lower viability than that of L929 mouse fibroblast cells. These results indicate that fDMP2 was efficiently taken up by HT-29 cells (29.9%). Fluorescence and confocal imaging analyses also showed possible internalisation of nanoparticles by HT-29 cells. In conclusion, fDMP2 shows promise as a DTX carrier for colon cancer drug delivery.

Controlled Release of 5-Fluorouracil from Alginate Beads Encapsulated in 3D Printed pH-Responsive Solid Dosage Forms

Three-dimensional printing is being steadily deployed as manufacturing technology for the development of personalized pharmaceutical dosage forms. In the present study, we developed a hollow pH-responsive 3D printed tablet encapsulating drug loaded non-coated and chitosan-coated alginate beads for the targeted colonic delivery of 5-fluorouracil (5-FU). A mixture of Eudragit® L100-55 and Eudragit® S100 was fabricated by means of hot-melt extrusion (HME) and the produced filaments were printed utilizing a fused deposition modeling (FDM) 3D printer to form the pH-responsive layer of the tablet with the rest comprising of a water-insoluble poly-lactic acid (PLA) layer. The filaments and alginate particles were characterized for their physicochemical properties (thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction), their surface topography was visualized by scanning electron microscopy and the filaments' mechanical properties were assessed by instrumented indentation testing and tensile testing. The optimized filament formulation was 3D printed and the structural integrity of the hollow tablet in increasing pH media (pH 1.2 to pH 7.4) was assessed by means of time-lapsed microfocus computed tomography (μCT). In vitro release studies demonstrated controlled release of 5-FU from the alginate beads encapsulated within the hollow pH-sensitive tablet matrix at pH values corresponding to the colonic environment (pH 7.4). The present study highlights the potential of additive manufacturing in fabricating controlled-release dosage forms rendering them pertinent formulations for further in vivo evaluation.

Inexpensive Apparatus for Fabricating Microspheres for 5-Fluorouracil Controlled Release Systems

The aim of this study was to develop an inexpensive apparatus for fabricating microspheres, based on chitosan, for 5-fluorouracil (5-FU) controlled release. Chitosan microspheres were prepared by precipitation method and the effects of manufacturing parameters (injection and airflow rates) on size distribution microspheres were analyzed by optical and scanning electron microscopy. The results show that the manufacturing parameters, injection and airflow rates, determine the microsphere size distribution. By modulating these parameters, it was possible to produce chitosan microspheres as small as 437 ± 44 μm and as large as 993 ± 18 μm. Chitosan microspheres loaded with 5-FU were also produced using the experimental equipment. The obtained microspheres presented 5-FU controlled release, indicating that the microspheres can be used orally, since they are capable of crossing the stomach barrier and of continuing with the process of 5-FU release.

Development and in vivo evaluation of an implantable nano-enabled multipolymeric scaffold for the management of AIDS dementia complex (ADC)

This study reports the use of biocompatible and biodegradable polymers for the formulation and design of an implantable multipolymeric drug delivery device (MDDD) for the management of AIDS dementia complex (ADC), a debilitating condition affecting the cognitive, motor and behavioral systems in HIV+ individuals. A 3-factor Box-Behnken statistical design was employed for the optimization of nanoparticle and multipolymeric scaffold formulations. Fifteen formulations were generated using the Box-Behnken template, which were assessed for physicochemical and physicomechanical characterization. The optimised nanoparticle formulation yielded nanoparticles measuring 68.04nm in size and zeta potential (ZP) of -13.4mV was calculated for the colloidal system. In an attempt to further retard drug release and to formulate a device for implantation in the frontal lobe of the brain, nanoparticles were dispersed within a multipolymeric matrix. Matrix erosion was calculated at 28% for multipolymeric scaffold and a matrix resilience of 4.451% was observed 30 days post exposure to PBS, indicating slow degradation of the MDDD. In vivo studies showed 12.793ng/mL and 35.225ng/mL AZT level in plasma and CSF. In view of the physicomechanical properties, in vitro and in vivo drug release kinetics of MDDD makes it a potential candidate for the management of the ADC.

Influence of oligofructose-enriched inulin on survival of microencapsulated Lactobacillus casei 01 and adhesive properties of synbiotic microparticles

Lactobacillus casei 01 was co-encapsulated with the prebiotic oligofructose-enriched inulin at different concentrations to investigate the efficiency of the prebiotic for improving the probiotic viability. Prebiotic effect on the probiotic survival under microencapsulation conditions by spray- and freeze-drying and storage stability of encapsulated living cells at 4 °C during period of 8 weeks was evaluated. Adhesiveness of L. casei 01 loaded microparticles to pig mucin was investigated in vitro to estimate the role of microencapsulation for improving the cell adhesion ability. The microparticles produced with 3% w/w oligofructose-enriched inulin showed higher initial count, while oligofructose-enriched inulin applied at 1.5% w/w resulted in better protection of L. casei 01 under storage conditions. Further, it has been observed significantly increased pig mucin binding to microparticles compared to free probiotic cells in buffer solutions simulating GI conditions, during 24 h incubation. Hence, cell microencapsulation beside enhanced viability may allow prolonged residence time of the probiotic cells in the lower intestine through excellent muco-adhesive properties of the encapsulating materials. The results suggest synbiotic chitosan-Ca-alginate microparticles as convenient delivery system capable to ensure effective cell concentration in the lower intestine where probiotic colonization is dominant.

Green synthesis of pullulan stabilized gold nanoparticles for cancer targeted drug delivery

The aim of this study was to synthesize green chemistry based gold nanoparticles using liver specific biopolymer and to develop a liver cancer targeted drug delivery system with enhanced efficacy and minimal side effects. Pullulan stabilized gold nanoparticles (PAuNPs) were coupled with 5-Fluorouracil (5-Fu) and folic acid (Fa) which could be used as a tool for targeted drug delivery and imaging of cancer. The toxicity of 5-Fu, 5-Fu adsorbed gold nanoparticles (5-Fu@AuNPs), Fa-coupled 5-Fu adsorbed gold nanoparticles (5-Fu@AuNPs-Fa), was studied using zebrafish embryo as an in vivo model. The in vitro cytotoxicity of free 5-Fu, 5-Fu@AuNPs, 5-Fu@AuNPs-Fa against HepG2 cells was studied and found that the amount of 5-Fu required to achieve 50% of growth of inhibition (Ic50) was much lower in 5-Fu@AuNP-Fa than in free 5-Fu, 5-Fu@AuNPs. The in vivo biodistribution of PAuNPs showed that higher amount of gold had been accumulated in liver (54.42±5.96 μg) than in other organs.

Wheat germ agglutinin-functionalised crosslinked polyelectrolyte microparticles for local colon delivery of 5-FU: in vitro efficacy and in vivo gastrointestinal distribution

We have previously reported the development and characterisation of wheat germ agglutinin (WGA)-functionalised chitosan-Ca-alginate (CTS-Ca-ALG) microparticles (MPs) loaded with acid-resistant particles of 5-fluorouracil (5-FU). In the present work, our goal was to evaluate the potential of these carriers for efficient treatment of colon cancer by studying in vitro permeability and cell association of 5-FU and [methyl-³H]thymidine uptake in Caco-2 cells, as well as in vivo gastrointestinal distribution. The amount of 5-FU permeated through Caco-2 cells was 15.1, 7.7 and 6.5% for 5-FU solution, CTS-Ca-ALG MPs and WGA conjugates. The concentration of 5-FU associated with Caco-2 cells was significantly greater when delivered from MPs. By incorporation of 5-FU into MPs and further decoration with WGA, an increased [methyl-³H]thymidine uptake was observed few hours after continuous drug treatment followed by significantly reduced uptake after 6 h. Gastrointestinal distribution was in favour of increased localisation and concentration of the particles in colon region.

Factorial design analysis and optimisation of alginate-Ca-chitosan microspheres

The purpose of this study was to apply factorial design in order to determine the influence of the formulation factors and their interactions on several responses such as particle size, dissolution behaviour at pH 1.2 and pH 7.4 as well as production yield, during the development of budesonide loaded, chitosan coated Ca-alginate microparticles (MPs) intended for treatment of inflammatory diseases in the gastrointestinal tract. Produced drug-loaded MPs were spherical in shape, had smooth surfaces with low porosity and size range between 5 and 11 µm. Production yield for the formulations from the design varied from 19% to 50%. Optimisation was performed using central composite design setting the targets: particle size at 5.5 µm, maximised yield, suppressed dissolution at pH 1.2 and sustained release at pH 7.4. The optimised batches were identified with a combined desirability value of 0.967.

Strategies of targeting oral drug delivery systems to the colon and their potential use for the treatment of colorectal cancer

Colorectal cancer (CRC) is the third most common cause of cancer-related death in both men and women. Often, surgical intervention remains the choice in treating CRC. Traditional dosage forms used for treating CRC deliver drug to wanted as well as unwanted sites of drug action resulting in several adverse side effects. Targeted oral drug delivery systems are being investigated to target and deliver chemotherapeutic and chemopreventive agents directly to colon and rectum. Site-specific delivery of a drug to colon increases its concentration at the target site, and thus requires a lower dose with reduced incidence of side effects. The major obstacle to be overcome for successful targeting of drug to colon through oral route is that drug absorption/degradation must be avoided in stomach and small intestine before the dosage form reaches colon. The review includes discussion of physiological factors that must be considered when targeting drugs directly to colorectal region, an outline on drugs used for treatment and prevention of CRC, and a brief description of various types of colon-targeted oral drug delivery systems. The focus is on the assessment of various formulation approaches being investigated for oral colon-specific delivery of drugs used in the treatment and prevention of CRC.

Alginate graft copolymers and alginate-co-excipient physical mixture in oral drug delivery

OBJECTIVES

Use of alginate graft copolymers in oral drug delivery reduces dosage form manufacture complexity with reference to mixing or coating processes. It is deemed to give constant or approximately steady weight ratio of alginate to covalently attached co-excipient in copolymers, thereby leading to controllable matrix processing and drug release. This review describes various grafting approaches and their outcome on oral drug release behaviour of alginate graft copolymeric matrices. It examines drug release modulation mechanism of alginate graft copolymers against that of co-excipients in non-grafted formulations.

KEY FINDINGS

Drug release from alginate matrices can be modulated through using either co-excipients or graft copolymers via changing their swelling, erosion, hydrophobicity/hydrophilicity, porosity and/or drug adsorption capacity. However, it is not known if the drug delivery performance of formulations prepared using alginate graft copolymers is superior to those incorporating graft-equivalent co-excipient physically in a dosage form without grafting but at the corresponding graft weight, owing to limited studies being available.

CONCLUSIONS

The value of alginate graft copolymers as the potential alternative to alginate-co-excipient physical mixture in oral drug delivery cannot be entirely defined by past and present research. Such an issue is complicated by the lack of green chemistry graft copolymer synthesis approach, high grafting process cost, complications and hazards, and the formed graft copolymers having unknown toxicity. Future research will need to address these matters to achieve a widespread commercialization and industrial application of alginate graft copolymers in oral drug delivery.