Effect of aqueous solubility of grafted moiety on the physicochemical properties of poly(d,l-lactide) (PLA) based nanoparticles

Assessment of core-shell nanoparticles surface structure heterogeneity by SAXS contrast variation and ab initio modeling

For the biomedical applications of nanoparticles, the study of their structure is a major step towards understanding the mechanisms of their interaction with biological environment. Detailed structural analysis of particles' surface is vital for rational design of drug delivery systems. In particular, for core-shell or surface-modified nanoparticles surface structure can be described in terms of shell coating uniformity and shell thickness uniformity around the nanoparticle core. Taken together, these terms can be used to indicate degree of heterogeneity of nanoparticle surface structure. However, characterization of nanoparticle surface structure under physiological conditions is challenging due to limitations of experimental techniques. In this paper, we apply SAXS contrast variation combined with ab initio bead modeling for this purpose. Approach is based on the fact that nanoparticles under study are produced by self-assembly of phospholipid-conjugated molecules that possess moieties with significantly different electron densities enabling SAXS technique to be used to distinguish nanoparticle shell and study its structure. Ab initio single phase and ab initio multiphase modeling based on SAXS curve of nanoparticles in phosphate buffer solution allowed to reconstruct nanoparticle shell coating and assess its uniformity, while serial nanoparticle reconstructions from solutions with gradually increased solvent electron densities revealed relative shell coating thickness around nanoparticle core. Nanoparticle shell structure representation was verified by molecular dynamics simulation and derived full-atom nanoparticle shell structure showed good agreement with SAXS-derived representation. Obtained data indicate that studied nanoparticles exhibit highly heterogeneous surface structure.

PEGylated and functionalized polylactide-based nanocapsules: An overview

Polymeric nanocapsules (NC) are versatile mixed vesicular nanocarriers, generally containing a lipid core with a polymeric wall. They have been first developed over four decades ago with outstanding applicability in the cosmetic and pharmaceutical fields. Biodegradable polyesters are frequently used in nanocapsule preparation and among them, polylactic acid (PLA) derivatives and copolymers, such as PLGA and amphiphilic block copolymers, are widely used and considered safe for different administration routes. PLA functionalization strategies have been developed to obtain more versatile polymers and to allow the conjugation with bioactive ligands for cell-targeted NC. This review intends to provide steps in the evolution of NC since its first report and the recent literature on PLA-based NC applications. PLA-based polymer synthesis and surface modifications are included, as well as the use of NC as a novel tool for combined treatment, diagnostics, and imaging in one delivery system. Furthermore, the use of NC to carry therapeutic and/or imaging agents for different diseases, mainly cancer, inflammation, and infections is presented and reviewed. Constraints that impair translation to the clinic are discussed to provide safe and reproducible PLA-based nanocapsules on the market. We reviewed the entire period in the literature where the term "nanocapsules" appears for the first time until the present day, selecting original scientific publications and the most relevant patent literature related to PLA-based NC. We presented to readers a historical overview of these Sui generis nanostructures.

Polyester Nanocapsules for Intravenous Delivery of Artemether: Formulation Development, Antimalarial Efficacy, and Cardioprotective Effects In Vivo

Artemether (ATM) is an effective antimalarial drug that also has a short half-life in the blood. Furthermore, ATM is also cardiotoxic and is associated with pro-arrhythmogenic risks. We aimed to develop a delivery system enabling the prolonged release of ATM into the blood coupled with reduced cardiotoxicity. To achieve this, we prepared polymeric nanocapsules (NCs) from different biodegradable polyesters, namely poly(D,L-lactide) (PLA), poly-ε-caprolactone (PCL), and surface-modified NCs, using a monomethoxi-polyethylene glycol-block-poly(D,L-lactide) (PEG5kDa-PLA45kDa) polymer. Using this approach, we were able to encapsulate high yields of ATM (>85%, 0−4 mg/mL) within the oily core of the NCs. The PCL-NCs exhibited the highest percentage of ATM loading as well as a slow release rate. Atomic force microscopy showed nanometric and spherical particles with a narrow size dispersion. We used the PCL NCs loaded with ATM for biological evaluation following IV administration. As with free-ATM, the ATM-PCL-NCs formulation exhibited potent antimalarial efficacy using either the “Four-day test” protocol (ATM total at the end of the 4 daily doses: 40 and 80 mg/kg) in Swiss mice infected with P. berghei or a single low dose (20 mg/kg) of ATM in mice with higher parasitemia (15%). In healthy rats, IV administration of single doses of free-ATM (40 or 80 mg/kg) prolonged cardiac QT and QTc intervals and induced both bradycardia and hypotension. Repeated IV administration of free-ATM (four IV doses at 20 mg/kg every 12 h for 48 h) also prolonged the QT and QTc intervals but, paradoxically, induced tachycardia and hypertension. Remarkably, the incorporation of ATM in ATM-PCL-NCs reduced all adverse effects. In conclusion, the encapsulation of ATM in biodegradable polyester NCs reduces its cardiovascular toxicity without affecting its antimalarial efficacy.

Nanoparticle heterogeneity: an emerging structural parameter influencing particle fate in biological media?

Drug nanocarriers' surface chemistry is often presumed to be uniform. For instance, the polymer surface coverage and distribution of ligands on nanoparticles are described with averaged values obtained from quantification techniques based on particle populations. However, these averaged values may conceal heterogeneities at different levels, either because of the presence of particle sub-populations or because of surface inhomogeneities, such as patchy surfaces on individual particles. The characterization and quantification of chemical surface heterogeneities are tedious tasks, which are rather limited by the currently available instruments and research protocols. However, heterogeneities may contribute to some non-linear effects observed during the nanoformulation optimization process, cause problems related to nanocarrier production scale-up and correlate with unexpected biological outcomes. On the other hand, heterogeneities, while usually unintended and detrimental to nanocarrier performance, may, in some cases, be sought as adjustable properties that provide NPs with unique functionality. In this review, results and processes related to this issue are compiled, and perspectives and possible analytical developments are discussed.

Branched polyesters: Preparative strategies and applications

In the last 20years, the availability of precision chemical tools (e.g. controlled/living polymerizations, 'click' reactions) has determined a step change in the complexity of both the macromolecular architecture and the chemical functionality of biodegradable polyesters. A major part in this evolution has been played by the possibilities that controlled macromolecular branching offers in terms of tailored physical/biological performance. This review paper aims to provide an updated overview of preparative techniques that derive hyperbranched, dendritic, comb, grafted polyesters through polycondensation or ring-opening polymerization mechanisms.

Thermoanalytical characterization of clindamycin-loaded intravitreal implants prepared by hot melt extrusion

BACKGROUND

The aim of the present study was to evaluate a non-destructive fabrication method in for the development of sustained-release poly (L, D-lactic acid)-based biodegradable clindamycin phosphate implants for the treatment of ocular toxoplasmosis.

MATERIALS AND METHODS

The rod-shaped intravitreal implants with an average length of 5 mm and a diameter of 0.4 mm were evaluated for their physicochemical parameters. Scanning electron microscopy (SEM), differential scanning calorimetry (DSC), Fourier-transform infrared (FTIR), and nuclear magnetic resonance (1H NMR) studies were employed in order to study the characteristics of these formulations.

RESULTS

Drug content uniformity test confirmed the uniformity in different implant batches. Furthermore, the DSC, FTIR, and 1H NMR studies proved that the fabrication process did not have any destructive effects either on the drug or on the polymer structures.

CONCLUSION

These studies showed that the developed sustained-release implants could be of interest for long-term sustained intraocular delivery of clindamycin, which can provide better patient compliance and also have good potential in terms of industrial feasibility.

Effect of the Polymer Architecture on the Structural and Biophysical Properties of PEG-PLA Nanoparticles

Polymers made of poly(ethylene glycol) chains grafted to poly(lactic acid) chains (PEG-g-PLA) were used to produce stealth drug nanocarriers. A library of comblike PEG-g-PLA polymers with different PEG grafting densities was prepared in order to obtain nanocarriers with dense PEG brushes at their surface, stability in suspension, and resistance to protein adsorption. The structural properties of nanoparticles (NPs) produced from these polymers by a surfactant-free method were assessed by dynamic light scattering, ζ potential, and transmission electron microscopy and found to be controlled by the amount of PEG present in the polymers. A critical transition from a solid NP structure to a soft particle with either a "micellelike" or a "polymer nanoaggregate" structure was observed when the PEG content was between 15 and 25% w/w. This structural transition was found to have a profound impact on the size of the NPs, their surface charge, their stability in suspension in the presence of salts, and the binding of proteins to the surface of the NPs. The arrangement of the PEG-g-PLA chains at the surface of the NPs was investigated by (1)H NMR and X-ray photoelectron spectroscopy (XPS). NMR results confirmed that the PEG chains were mostly segregated at the NP surface. Moreover, XPS and quantitative NMR allowed quantification of the PEG chain coverage density at the surface of the solid NPs. Concordance of the results between the two methods was found to be remarkable. Physical-chemical properties of the NPs such as resistance to aggregation in a saline environment as well as antifouling efficacy were related to the PEG surface density and ultimately to the polymer architecture. Resistance to protein adsorption was assessed by isothermal titration calorimetry using lysozyme. The results indicate a correlation between the PEG surface coverage and level of protein interactions. The results obtained lead us to propose such PEG-g-PLA polymers for nanomedicine development as an alternative to the predominant polyester-PEG diblock polymers.

Biodegradable amphiphilic block-graft copolymers based on methoxy poly(ethylene glycol)-b-(polycarbonates-g-polycarbonates) for controlled release of doxorubicin

In this paper, novel biodegradable amphiphilic block-graft copolymers based on methoxy poly(ethylene glycol)-b-(polycarbonates-g-polycarbonates) (mPEG-b-(PATMC-g-PATMC)) were synthesized successfully for controlled release of doxorubicin (DOX). Backbone block copolymer, methoxy poly(ethylene glycol)-b-poly(5-allyloxy-1,3-dioxan-2-one) (mPEG-b-PATMC) was synthesized in bulk catalyzed by immobilized porcine pancreas lipase (IPPL). Then, mPEG-b-PATMC-O, the allyl epoxidation product of mPEG-b-PATMC, was further grafted by PATMC itself also using IPPL as the catalyst. The copolymers were characterized by (1)N HMR and gel permeation chromatography results showed narrow molecular weight distributions. Stable micelle solutions could be prepared by dialysis method, while a monomodal and narrow size distribution could be obtained. Transmission electron microscopy (TEM) observation showed the micelles dispersed in spherical shape with nano-size before and after DOX loading. Compared with the block copolymers, the grafted structure could enhance the interaction of polymer chains with drug molecules and improve the drug-loading capacity and entrapment efficiency. Furthermore, the amphiphilic block-graft copolymers mPEG-b-(PATMC-g-PATMC) had low cytotoxicity and more sustained drug release behavior.

Improved antifungal activity of itraconazole-loaded PEG/PLA nanoparticles

Poly(ethylene glycol)/polylactic acid (PEG/PLA) nanoparticles (NPs) containing the hydrophobic antifungal itraconazole (ITZ) were developed to provide a controlled release pattern of ITZ as well as to improve its aqueous dispersibility and hence enhance its antifungal action. Two PEG/PLA copolymers (PEGylated PLA polymers) were used in this study; branched PEGylated polymer in which PEG was grafted on PLA backbone at 7% (mol/mol of lactic acid monomer), PEG7%-g-PLA, and multiblock copolymer of PLA and PEG, (PLA-PEG-PLA)n with nearly similar PEG insertion ratio and similar PEG chain length. ITZ-loaded PLA NPs were also prepared and included in this study as a control. ITZ-NPs were prepared from a 1 : 1 w/w blend of PLA and each PEGylated polymer either PEG7%-g-PLA or (PLA-PEG-PLA)n using an oil-in-water emulsion evaporation method. The NPs morphology, size and size distribution, zeta potential, loading efficiency, release profile and antifungal activity were characterized. All ITZ-NPs were nearly spherical with smooth surface and showed less aggregating tendency with a size range of 185-285 nm. All ITZ-NPs measured nearly neutral zeta potential values close to 0 mV. The % LE of ITZ was ∼94% for PEG7%-g-PLA NPs and ∼83% for (PLA-PEG-PLA)n at 15.3% w/w theoretical loading. PEG/PLA NPs were stable over time regarding size and size distribution and % ITZ loading efficiency (% LE). ITZ release showed an initial burst followed by a gradual release profile for ITZ-NPs over 5 days. (PLA-PEG-PLA)n NPs exhibited faster release rates than PEG7%-g-PLA NPs particularly at the last 2 days. Differential scanning calorimetry and powder X-ray diffractometry data confirmed that ITZ exists in an amorphous state or a solid solution state into the NPs matrix. Fourier transform infrared revealed the possibility of chemical interaction between ITZ and the NPs matrix polymer indicating the successful entrapment of ITZ inside the particles. In haemolysis test, ITZ-NPs caused mild haemolysis over the concentration range (5-20 µg/mL) compared to free ITZ, indicating better safety profile of ITZ-NPs. ITZ-loaded PEG/PLA NPs inhibited fungal growth more efficiently than either free ITZ or ITZ-loaded PLA NPs. Our results suggest that PEG/PLA-ITZ could be used efficiently as a nanocarrier to improve the aqueous dispersibility of ITZ, control its release over time and, thereby, enhance its antifungal efficacy.