Poloxamer 407 microspheres for orotransmucosal drug delivery. Part II: In vitro/in vivo evaluation

Promising brain biodistribution of insulin via intranasal dry powder for nose-to-brain delivery

Nose-to-brain delivery (NTBD) offering potential benefits for treating Alzheimer's disease. In previous research, insulin dry powder (IDP) formulation for NTBD was developed, exhibiting favorable stability. This study aims to conduct in vitro and ex vivo assessment of release, permeation, mucoadhesion and histopathology, as well as an in vivo biodistribution study to produce IDP for NTBD and evaluate brain biodistribution. Spray-freeze-dried IDP formulations with varying weight ratios of trehalose-to-inulin were produced and analyzed. The release study was carried out in PBS with a pH of 5.8 stirred at 50 rpm and maintained at 37 °C ± 0.5 °C. Goat nasal mucosa was used for ex vivo permeation and mucoadhesion testing under similar conditions. An ex vivo histopathological examination and an in vivo study using enzyme-linked immunosorbent assay, were also performed. The IDP dissolution study demonstrated complete release of all IDPs within 120 min. The permeation study indicated that steady-state conditions were observed between 30 and 240 min. The mucoadhesion study unveiled that IDP F5 exhibited the fastest mucoadhesion time and the least force required within the fastest time of 43.60 ± 2.57 s. The histopathological study confirmed that none of the tested IDPs induced irritation in the nasal mucosa. Furthermore, the biodistribution study demonstrated the absence of detectable insulin in the plasma, while IDP F3 exhibited the highest deposited concentration of insulin within both the olfactory bulb and the whole brain. The extensive evaluation of the IDP formulations through in vitro, ex vivo, and in vivo studies implies their strength non-invasive NTBD. IDP F3, with a 1:1 wt ratio of trehalose to inulin, exhibited favorable brain biodistribution outcomes and was recommended for further investigation and development in the context of NTBD.

Nasal delivery of an immunotherapeutic vaccine in thermosensitive hydrogel against allergic asthma

Asthma poses a significant threat to public health, with an estimated burden of over 334 million people worldwide. Available treatments are often inadequate. We developed a thermo-sensitive hydrogel vaccine containing allergen and FK506 that induced immune tolerance via intranasal administration to treat experimental allergic asthma. The hydrogel delivery system was formulated based on Poloxamer 407 (P407), Carbopol 974P NF, and Polyoxyl 15 hydroxystearate (Kolliphor HS15, HS15). It flowed freely at room temperature and rapidly formed a hydrogel in the nasal cavity once the temperature rose over 33 °C. Ovalbumin and FK506 were slowly released from the hydrogel form and their mucosal residence time was significantly prolonged compared to the liquid formulation. In both an OVA-induced asthma model and an HDM-induced asthma model, the vaccines formulated in hydrogel gave lower levels of eosinophilic inflammation, and airway remodeling. The reduction of lung function was ameliorated, and Foxp3-expressing CD4 + Treg cells were significantly higher. The frequency of Foxp3 + Tregs in lung-draining lymph nodes (dLNs) was correlated with the amelioration. Depletion of Foxp3 + Treg cells abolished the beneficial effects of the allergen/FK506 hydrogel vaccinations. Thus, the allergen/FK506 hydrogel formulation has the potential to be a delivery system for therapeutic allergy vaccines to induce immune tolerance.

Sublingual Boosting with a Novel Mucoadhesive Thermogelling Hydrogel Following Parenteral CAF01 Priming as a Strategy Against Chlamydia trachomatis

Chlamydia trachomatis is the most prevalent sexually transmitted disease of bacterial origin. The high number of asymptomatic cases makes it difficult to stop the transmission, requiring vaccine development. Herein, a strategy is proposed to obtain local genital tract immunity against C. trachomatis through parenteral prime and sublingual boost. Subcutaneous administration of chlamydia CTH522 subunit vaccine loaded in the adjuvant CAF01 is combined with sublingual administration of CTH522 loaded in a novel thermosensitive and mucoadhesive hydrogel. Briefly, a ternary optimized hydrogel (OGEL) with desirable biological and physicochemical properties is obtained using artificial intelligence techniques. This formulation exhibits a high gel strength and a strong mucoadhesive, adhesive and cohesive nature. The thermosensitive properties of the hydrogel facilitate application under the tongue. Meanwhile the fast gelation at body temperature together with rapid antigen release should avoid CTH522 leakage by swallowing and increase the contact with sublingual tissue, thus promoting absorption. In vivo studies demonstrate that parenteral-sublingual prime-boost immunization, using CAF01 and OGEL as CTH522 vaccine carriers, shows a tendency to increase cellular (Th1/Th17) immune responses when compared to mucosal or parenteral vaccination alone. Furthermore, parenteral prime with CAF01/CTH522 followed by sublingual boosting with OGEL/CTH522 elicits a local IgA response in the genital tract.

Better and greener: sustainable pharmaceutical manufacturing technologies for highly bioavailable solid dosage forms

In the last decades, Green Chemistry has been gaining widespread attention within the pharmaceutical field. It is thus very important to bring more sustainable approaches into the design and manufacture of effective oral drug delivery systems. This review focuses on spray congealing and mechanochemical activation, two technologies endorsing different principles of green chemistry, and at the same time, addressing some of the challenges related to the transformation of poorly water-soluble drugs in highly bioavailable solid dosage forms. We therefore present an overview of the basic principles, equipment, and application of these particle-engineering technologies, with specific attention to case studies carried out by the groups working in Italian Universities.

GSK3 inhibitor-loaded osteotropic Pluronic hydrogel effectively mitigates periodontal tissue damage associated with experimental periodontitis

Periodontitis is a chronic inflammatory disease caused by complex interactions between the host immune system and pathogens that affect the integrity of periodontium. To prevent disease progression and thus preserve alveolar bone structure, simultaneous anti-inflammatory and osteogenic intervention are essential. Hence, a glycogen synthase kinase 3 beta inhibitor (BIO) was selected as a potent inflammation modulator and osteogenic agent to achieve this treatment objective. BIO's lack of osteotropicity, poor water solubility, and potential long-term systemic side effects, however, have hampered its clinical applications. To address these limitations, pyrophosphorylated Pluronic F127 (F127-PPi) was synthesized and mixed with regular F127 to prepare an injectable and thermoresponsive hydrogel formulation (PF127) of BIO, which could adhere to hard tissue and gradually release BIO to exert its therapeutic effects locally. Comparing to F127 hydrogel, PF127 hydrogels exhibited stronger binding to hydroxyapatite (HA). Additionally, BIO's solubility in PF127 solution was dramatically improved over F127 solution and the improvement was proportional to the polymer concentration. When evaluated on a rat model of periodontitis, PF127-BIO hydrogel treatment was found to be very effective in preserving alveolar bone and ligament, and preventing periodontal inflammation, as shown by the micro-CT and histological data, respectively. Altogether, these findings suggested that the thermoresponsive PF127 hydrogel is an effective local drug delivery system for better clinical management of periodontitis and associated pathologies.

Non-viral mediated gene therapy in human cystic fibrosis airway epithelial cells recovers chloride channel functionality

Gene therapy strategies based on non-viral vectors are currently considered as a promising therapeutic option for the treatment of cystic fibrosis (CF), being liposomes the most commonly used gene carriers. Niosomes offer a powerful alternative to liposomes due to their higher stability and lower cytotoxicity, provided by their non-ionic surfactant and helper components. In this work, a three-formulation screening is performed, in terms of physicochemical and biological behavior, in CF patient derived airway epithelial cells. The most efficient niosome formulation reaches 28% of EGFP expressing live cells and follows caveolae-mediated endocytosis. Transfection with therapeutic cystic fibrosis transmembrane conductance regulator (CFTR) gene results in 5-fold increase of CFTR protein expression in transfected versus non-transfected cells, which leads to 1.5-fold increment of the chloride channel functionality. These findings highlight the relevance of niosome-based systems as an encouraging non-viral gene therapy platform with potential therapeutic benefits for CF.

Advances in Therapeutics and Delayed Drug Release

Reducing the frequency of drug administration in the treatment of exotic pets is advantageous because it may decrease handling frequency and thus potential stress and injury risk for the animal, increase owner compliance with the prescribed treatment, and decrease need for general anesthesia in patients that cannot be handled safely. Increasing efficient drug plasma concentration using sustained-released delivery systems is an appealing solution. Potential candidates that could provide a promising solution have been investigated in exotic pets. In this article, the technologies that are the closest to being integrated in exotic pet medicine are reviewed: osmotic pumps, nanoparticles, and hydrogels.

Spray Congealing: An Emerging Technology to Prepare Solid Dispersions with Enhanced Oral Bioavailability of Poorly Water Soluble Drugs

The low and variable oral bioavailability of poorly water soluble drugs remains a major concern for the pharmaceutical industry. Spray congealing is an emerging technology for the production of solid dispersion to enhance the bioavailability of poorly soluble drugs by using low-melting hydrophilic excipients. The main advantages are the absence of solvents and the possibility to obtain spherical free-flowing microparticles (MPs) by a relatively inexpensive, simple, and one-step process. This review aims to fully describe the composition, structure, physico-chemical properties, and characterization techniques of spray congealed-formulations. Moreover, the influence of these properties on the MPs performance in terms of solubility and dissolution enhancement are examined. Following, an overview of the different spray congealed systems developed to increase the oral drug bioavailability is provided, with a focus on the mechanisms underpinning the bioavailability enhancement. Finally, this work gives specific insights on the main factors to be considered for the rational formulation, manufacturing, and characterization of spray congealed solid dispersions.

Spray congealing: a versatile technology for advanced drug-delivery systems

Spray congealing is a low cost, simple and versatile method to produce microparticles without the use of organic or aqueous solvent. This review provides a detailed picture of the pharmaceutical applications of this technology, with an overview of the spray-congealed-based drug-delivery systems. First, the basic principles and equipment of spray congealing technology are presented. Then, representative examples of the drug-delivery systems are examined and critically discussed. Emphasis is given on the role of formulation variables, together with practical considerations for formulation design. In addition, the current status of the industrial applications of this technology within the pharmaceutical field is examined. The final part points out benefits, limitations and future perspectives of this technology in drug delivery.

Stimulus Sensitive Smart Nanoplatforms: An Emerging Paradigm for the Treatment of Skin Diseases

Background:

Over the past century, the prevalence of skin diseases has substantially increased. These diseases present a significant physical, emotional and socio-economic burden to the society. Such conditions are also associated with a multitude of psychological traumas to the suffering patients. The effective treatment strategy implicates targeting of drugs to the skin. The field of drug targeting has been revolutionized with the advent of nanotechnology. The emergence of stimulus-responsive nanoplatforms has provided remarkable control over fundamental polymer properties for external triggers. This enhanced control has empowered pioneering approaches in the treatment of chronic inflammatory skin diseases.

Objective:

Our aim was to investigate the studies on smart nanoplatforms that exploit the altered skin physiology under diseased conditions and provide site-specific controlled drug delivery.

Method:

All literature search regarding the advances in stimulus sensitive smart nanoplatforms for skin diseases was done using Google Scholar and Pubmed.

Conclusion:

Various stimuli explored lately for such nano platforms are pH, temperature, light and magnet. Although, the scientists have actively taken up this research topic but there are still certain lacunaes associated which have been discussed in this review. Further, an interdisciplinary collaboration between the healthcare providers and pharmacists is a pivotal requirement for such systems to be available for patients.

Dissolution and bioavailability improvement of bioactive apigenin using solid dispersions prepared by different techniques

Apigenin (APG) is a poorly soluble bioactive compound/nutraceutical which shows poor bioavailability upon oral administration. Hence, the objective of this research work was to develop APG solid dispersions (SDs) using different techniques with the expectation to obtain improvement in its in vitro dissolution rate and in vivo bioavailability upon oral administration. Different SDs of APG were prepared by microwave, melted and kneaded technology using pluronic-F127 (PL) as a carrier. Prepared SDs were characterized using "thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infra-red (FTIR) spectrometer, powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM)". After characterization, prepared SDs of APG were studied for in vitro drug release/dissolution profile and in vivo pharmacokinetic studies. The results of TGA, DSC, FTIR, PXRD and SEM indicated successful formation of APG SDs. In vitro dissolution experiments suggested significant release of APG from all SDs (67.39-84.13%) in comparison with control (32.74%). Optimized SD of APG from each technology was subjected to in vivo pharmacokinetic study in rats. The results indicated significant improvement in oral absorption of APG from SD prepared using microwave and melted technology in comparison with pure drug and commercial capsule. The enhancement in oral bioavailability of APG from microwave SD (319.19%) was 3.19 fold as compared with marketed capsule (100.00%). Significant enhancement in the dissolution rate and oral absorption of APG from SD suggested that developed SD systems can be successfully used for oral drug delivery system of APG.

Hyaluronic acid hydrogel scaffolds loaded with cationic niosomes for efficient non-viral gene delivery

The lack of ideal non-viral gene carriers has motivated the combination of delivery systems and tissue-engineered scaffolds, which may offer relevant advantages such as enhanced stability and reduced toxicity. In this work, we evaluated a new combination between niosome non-viral vectors and hyaluronic acid (HA) hydrogel scaffolds, both widely studied due to their biocompatibility as well as their ability to incorporate a wide variety of molecules. We evaluated three different niosome formulations (niosomes 1, 2 and 3) varying in composition of cationic lipid, helper lipid and non-ionic tensioactives. Niosomes and nioplexes obtained upon the addition of plasmid DNA were characterized in terms of size, polydispersity, zeta potential and ability to transfect mouse bone marrow cloned mesenchymal stem cells (mMSCs) in 2D culture. Niosome 1 was selected for encapsulation in HA hydrogels due to its higher transfection efficiency and the formulation was concentrated in order to be able to incorporate higher amounts of DNA within HA hydrogels. Nioplex-loaded HA hydrogels were characterized in terms of biomechanical properties, particle distribution, nioplex release kinetics and ability to transfect encapsulated mMSCs in 3D culture. Our results showed that nioplex-loaded HA hydrogel scaffolds presented little or no particle aggregation, allowed for extensive cell spreading and were able to efficiently transfect encapsulated mMSCs with high cellular viability. We believe that the knowledge gained through this in vitro model can be utilized to design novel and effective platforms for in vivo local and non-viral gene delivery applications.

Nioplexes encapsulated in HA hydrogel scaffolds present no particle aggregation, incorporate high amount of DNA, allow extensive cell spreading and are able to efficiently transfect mesenchymal stem cells in 3D cultures with high cellular viability.

Mucosal Applications of Poloxamer 407-Based Hydrogels: An Overview

Poloxamer 407, also known by the trademark Pluronic^® F127, is a water-soluble, non-ionic triblock copolymer that is made up of a hydrophobic residue of polyoxypropylene (POP) between the two hydrophilic units of polyoxyethylene (POE). Poloxamer 407-based hydrogels exhibit an interesting reversible thermal characteristic. That is, they are liquid at room temperature, but they assume a gel form when administered at body temperature, which makes them attractive candidates as pharmaceutical drug carriers. These systems have been widely investigated in the development of mucoadhesive formulations because they do not irritate the mucosal membranes. Based on these mucoadhesive properties, a simple administration into a specific compartment should maintain the required drug concentration in situ for a prolonged period of time, decreasing the necessary dosages and side effects. Their main limitations are their modest mechanical strength and, notwithstanding their bioadhesive properties, their tendency to succumb to rapid elimination in physiological media. Various technological approaches have been investigated in the attempt to modulate these properties. This review focuses on the application of poloxamer 407-based hydrogels for mucosal drug delivery with particular attention being paid to the latest published works.

New perspectives of starch: Synthesis and in vitro assessment of novel thiolated mucoadhesive derivatives

AIM

The purpose of this study was to develop a novel thiolated starch polymer with improved mucoadhesive properties by conjugation of cysteamine to starch as a natural polymer of restricted mucoadhesive properties.

METHODS

Aldehyde substructures were integrated into starch via oxidative cleavage of vicinal diols by increasing amounts of sodium periodate followed by covalent attachment of cysteamine to oxidized starch via reductive amination. Thiol groups were quantified via Ellman's reaction and their impact on mucoadhesion was analyzed by rheological investigations, the rotating cylinder method and tensile studies on porcine mucosa.

RESULTS

The total amount of immobilized thiol groups revealed a correlation between degree of oxidation and thiolation. Modified starch demonstrated an up to 1.66-fold increase in water uptake in comparison to native starch. Modification of starch resulted in greatly improved cohesive properties and improvement in mucoadhesion. Rheological investigations revealed a 2- to 4-fold rise in viscosity of mucus. Tensile studies revealed a linear correlation between degree of oxidation/thiolation and enhancement of maximum detachment force and total work adhesion.

CONCLUSION

In terms of these results, thiolated starch is a new, promising, polymer in the field of mucoadhesive drug delivery systems.

Pharmacokinetics of butorphanol tartrate in a long-acting poloxamer 407 gel formulation administered to Hispaniolan Amazon parrots (Amazona ventralis)

OBJECTIVE To determine pharmacokinetics of butorphanol tartrate incorporated into poloxamer 407 (P407) after SC administration to Hispaniolan Amazon parrots (Amazona ventralis). ANIMALS 11 adult Hispaniolan Amazon parrots (6 males and 5 females; 11 to 27 years old). PROCEDURES A sterile formulation of butorphanol in P407 (But-P407) 25% (percentage determined as [weight of P407/weight of diluent] × 100]) was created (8.3 mg/mL). Five preliminary experiments (2 birds/experiment) were performed to determine the ideal dose for this species. The formulation then was administered (12.5 mg/kg, SC) to 8 birds. Blood samples were collected before (time 0) and 0.08, 0.5, 1, 2, 4, 8, 12, and 24 hours after drug administration. Some birds were used more than once, with a washout period of ≥ 3 months between subsequent treatments. Butorphanol concentrations were quantitated by use of liquid chromatography-tandem mass spectrometry. Pharmacokinetic analysis was performed by use of noncompartmental analysis. RESULTS Maximal plasma butorphanol concentration was reached at 1.31 hours. Plasma concentrations of butorphanol remained > 100 ng/mL for > 3 hours (all birds) or > 4 hours (5/8 birds) but < 8 hours (all birds). Half-life of the terminal slope was 3.41 hours. No adverse effects were detected. CONCLUSIONS AND CLINICAL RELEVANCE Butorphanol was absorbed well from the But-P407 25% by Hispaniolan Amazon parrots, and absorption followed a pharmacokinetic profile compatible with a sustained-release drug. A dose of 12.5 mg/kg, SC, would theoretically provide analgesia for 4 to 8 hours. No adverse effects were detected. Studies on the pharmacodynamics of this formulation are necessary to confirm the degree and duration of analgesia.

Gelucire-Based Nanoparticles for Curcumin Targeting to Oral Mucosa: Preparation, Characterization, and Antimicrobial Activity Assessment

The purpose of the study was to prepare and characterize curcumin (Cur) solid lipid nanoparticles (CurSLN) with a high-loading capacity and chemical stability for the treatment of oral mucosal infection. CurSLN were formulated using different lipids, namely, Gelucire 39/01, Gelucire 50/13, Precirol, Compritol, and poloxamer 407 as a surfactant. Formulae were evaluated for their entrapment efficiency, particle size, and ex vivo mucoadhesion test. Microbiological evaluation was carried out on six microorganisms, five of which are the most commonly affecting oral cavity in terms of determination of minimum inhibitory concentration (MIC), and minimum bactericidal concentration. Transmission electron microscopy was conducted for ultrathin section for Candida albicans-treated with formulated Cur. The results showed high entrapment efficiency and stability enhancement for Cur powder. Significant amount of Cur was retained onto the mucosal tissue indicating preferential mucosal uptake. CurSLN showed higher antimicrobial activity as compared with Cur raw material and chemically stabilized Cur where it showed MIC (0.185, 0.09375, 0.75, 3, 1.5, and 0.1875 mg/mL) against Staphylococcus aureus, Streptococcus mutans, Viridansstrept, Escherichia coli, Lactobacillus acidophilus, and Candida albicans, respectively. The prepared lipid nanoparticles maintained Cur chemical stability and microbiological activity. The lack of local antimicrobial therapeutics with minimum side effects augments the importance of studying natural products for this purpose.

Overview and appraisal of the current concept and technologies for improvement of sublingual drug delivery

Sublingual drug delivery is capable of achieving high bioavailability by avoiding first-pass liver extraction and enzymatic degradation in the gastrointestinal tract, as well as achieving rapid onset of effect. Thus, this route of administration can offer attractive therapeutic advantages for certain drugs as a convenient substitute for parenteral administration and has been applied successfully to a number of therapeutic conditions, especially urgent cardiovascular conditions and acute severe pain control. However, due to inherent limitations such as small sublingual mucosa area for absorption, primarily passive mechanism of transport, short residence time, and potential local irritation, a relatively small number of sublingual products have been successfully developed to date. In this Review, key concepts and technologies for potential improvement of sublingual drug delivery are reviewed. The optimal application of these concepts and technologies, together with clinical need for non-parenteral delivery, will hopefully broaden the development of sublingual drug delivery in the future.

Solid dispersion of ursolic acid in Gelucire 50/13: a strategy to enhance drug release and trypanocidal activity

Solid dispersions (SDs) are an approach to increasing the water solubility and bioavailability of lipophilic drugs such as ursolic acid (UA), a triterpenoid with trypanocidal activity. In this work, Gelucire 50/13, a surfactant compound with permeability-enhancing properties, and silicon dioxide, a drying adjuvant, were employed to produce SDs with UA. SDs and physical mixtures (PMs) in different drug/carrier ratios were characterized and compared using differential scanning calorimetry, hot stage microscopy, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), particle size, water solubility values, and dissolution profiles. Moreover, LLC-MK2 fibroblast cytotoxicity and trypanocidal activity evaluation were performed to determine the potential of SD as a strategy to improve UA efficacy against Chagas disease. The results demonstrated the conversion of UA from the crystalline to the amorphous state through XRD. FTIR experiments provided evidence of intermolecular interactions among the drug and carriers through carbonyl peak broadening in the SDs. These findings helped explain the enhancement of water solubility from 75.98 μg/mL in PMs to 293.43 μg/mL in SDs and the faster drug release into aqueous media compared with pure UA or PMs, which was maintained after 6 months at room temperature. Importantly, improved SD dissolution was accompanied by higher UA activity against trypomastigote forms of Trypanosoma cruzi, but not against mammalian fibroblasts, enhancing the potential of UA for Chagas disease treatment.