Preparation, characterization and evaluation of breviscapine lipid emulsions coated with monooleate-PEG-COOH

Nose-to-Brain Delivery by Nanosuspensions-Based in situ Gel for Breviscapine

Purpose

Nose-to-brain drug delivery is an effective approach for poorly soluble drugs to bypass the blood–brain barrier. A new drug intranasal delivery system, a nanosuspension-based in situ gel, was developed and evaluated to improve the solubility and bioavailability of the drug and to prolong its retention time in the nasal cavity.

Materials and Methods

Breviscapine (BRE) was chosen as the model drug. BRE nanosuspensions (BRE-NS) were converted into BRE nanosuspension powders (BRE-NP). A BRE nanosuspension in situ gelling system (BRE-NG) was prepared by mixing BRE-NP and 0.5% gellan gum (m/v). First, the BRE-NP were evaluated in terms of particle size and by differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Subsequently, the critical ionic concentration of the gellan gum phase transition, influence of the deacetylated gellan gum (DGG) concentration on the expansion coefficient (S%), water-holding capacity, rheological properties and in vitro release behaviour of the BRE-NG were investigated. The pharmacokinetics and brain distribution of the BRE-NG after intranasal administration were compared with those of the intravenously injected BRE-NP nanosuspensions in rats.

Results

The rheology results demonstrated that BRE-NG was a non-Newtonian fluid with good spreadability and bioadhesion performance. Moreover, the absolute bioavailability estimated for BRE-NG after intranasal administration was 57.12%. The drug targeting efficiency (DTE%) of BRE in the cerebrum, cerebellum and olfactory bulb was 4006, 999 and 3290, respectively. The nose-to-brain direct transport percentage (DTP%) of the cerebrum, cerebellum and olfactory bulb was 0.975, 0.950 and 0.970, respectively.

Conclusion

It was concluded that the in situ gel significantly increased the drug retention time at the administration site. Therefore, the nanosuspension-based in situ gel could be a convenient and effective intranasal formulation for the administration of BRE.

Improving Solubility and Bioavailability of Breviscapine with Mesoporous Silica Nanoparticles Prepared Using Ultrasound-Assisted Solution-Enhanced Dispersion by Supercritical Fluids Method

Background

Breviscapine (BRE) has significant efficacy in cardiovascular disease, but the poor water solubility of breviscapine affects its oral absorption and limits its clinical application. In this study, supercritical carbon dioxide (SCF-CO₂) technology was used to improve the solubility and bioavailability of BRE loaded into mesoporous silica nanoparticles (MSNs).

Methods

The solubility of BRE in SCF-CO₂ was measured under various conditions to investigate the feasibility of preparing drug-loaded MSNs by using ultrasound-assisted solution-enhanced dispersion by supercritical fluids (USEDS). The preparation process of drug-loaded MSNs was optimized using the central composite design (CCD), and the optimized preparation was comprehensively characterized. Furthermore, the drug-loaded MSNs prepared by the conventional method were compared. Finally, the dissolution and bioavailability of the preparations were evaluated by in vitro release and pharmacokinetics study.

Results

The solubility of BRE in SCF-CO₂ was extremely low which was suitable to prepare BRE-loaded MSNs by USEDS technology. The particle size of the preparation was 177.24 nm, the drug loading was 8.63%, and the specific surface area was 456.3m²/g. As compared to the conventional preparation method of solution impregnation-evaporation (SIV), the formulation prepared by USEDS technology has smaller particle size, higher drug loading, less residual solvent and better stability. The results of the in vitro release study showed that drug-loaded MSNs could significantly improve drug dissolution. The results of pharmacokinetics showed that the bioavailability of drug-loaded MSNs was increased 1.96 times compared to that of the BRE powder.

Conclusion

Drug-loaded MSNs can significantly improve the solubility and bioavailability of BRE, indicating a good application prospect for MSNs in improving the oral absorption of drugs. In addition, as a solid dispersion preparation technology, USEDS technology has incomparable advantages.

Cationic nanoemulsions with prolonged retention time as promising carriers for ophthalmic delivery of tacrolimus

Tacrolimus, also known as FK506, is a first-line drug for the topical treatment of immune-mediated inflammatory anterior ocular diseases (IIAODs). However, due to its limited water solubility, hydrophobic nature and relatively high molecular weight, topical application of FK506 features poor bioavailability. Numbers of formulations have been attempted to enhance the erratic bioavailability of FK506 through various techniques. But until now, none of them could satisfy the clinical needs completely. Here, a novel formulation of FK506, FK506-loaded cationic nanoemulsions (FK506 CNE), was developed to prolong the precorneal residence time of FK506, thereby enhancing the bioavailability of FK506 for IIAODs therapy. FK506 CNE was prepared by high-pressure homogenization, and its composition was screened and optimized by single-factor experiments. The FK506 CNE showed spherical morphology with a mean diameter of 178.8 ± 2.7 nm and a zeta potential of +25.6 ± 0.6 mV. Results from in vivo gamma scintigraphy studies proved that the precorneal residence time of FK506 CNE was significantly increased, compared with FK506-loaded neutral nanoemulsions (FK506 NE) and saline. The data of aqueous humor pharmacokinetic study in rabbits showed that the relative bioavailability of FK506 CNE was 1.68-fold and 1.77-fold of FK506 NE and the marketed FK506 eye drops (Talymus®), respectively. Finally, hematoxylin and eosin staining images and in vitro cytotoxicity data confirmed the safety of the FK506 CNE. Taking all these into consideration, we propose that FK506 CNE is a promising topical ophthalmic nanoformulation for the management of IIAODs.

Design and development of microemulsion systems of a new antineoplaston A10 analog for enhanced intravenous antitumor activity: In vitro characterization, molecular docking, 125I-radiolabeling and in vivo biodistribution studies

A10, (3-phenylacetylamino-2,6-piperidinedione), is a natural peptide with broad antineoplastic activity. Recently, in vitro antitumor effect of a new A10 analog [3-(4-methoxybenzoylamino)-2,6-piperidinedione] (MPD) has been verified. However, poor aqueous solubility represents an obstacle towards intravenous formulation of MPD and impedes successful in vivo antitumor activity. To surmount such limitation, MPD microemulsion (MPDME) was developed. A 3¹2² full factorial design using Design-Expert® software was adopted to study the influence of different parameters and select the optimum formulation (MPDME1). Transmission electron microscopy (TEM) displayed spherical droplets of MPDME1. The cytotoxicity of MPDME1 in Michigan Cancer Foundation 7 (MCF-7) breast cancer cell line exceeded that of MPD solution (MPDS) and tamoxifen. Compatibility with injectable diluents, in vitro hemolytic studies and in vivo histopathological examination confirmed the safety of parenteral application of MPDME1. Molecular docking results showed almost same binding affinity of A10, MPD and ¹²⁵I-MPD with histone deacetylase 8 (HDAC8) receptor. Accordingly, radioiodination of MPDME1 and MPDS was done via direct electrophilic substitution reaction. Biodistribution of ¹²⁵I-MPDME1 and ¹²⁵I-MPDS in normal and tumor (ascites and solid) bearing mice showed high accumulation of ¹²⁵I-MPDME1 in tumor tissues. Overall, the results proved that MPDME represents promising parenteral delivery system capable of improving antineoplastic activity of MPD.

Efficient co-delivery of immiscible hydrophilic/hydrophobic chemotherapeutics by lipid emulsions for improved treatment of cancer

Combinational nanomedicine is becoming a topic of much interest in cancer therapy, although its translation into the clinic remains extremely challenging. One of the main obstacles lies in the difficulty to efficiently co-deliver immiscible hydrophilic/hydrophobic drugs into tumor sites. The aim of this study was to develop co-loaded lipid emulsions (LEs) to co-deliver immiscible hydrophilic/hydrophobic drugs to improve cancer therapy and to explore the co-delivery abilities between co-loaded LEs and mixture formulation. Multiple oxaliplatin/irinotecan drug–phospholipid complexes (DPCs) were formulated. Co-loaded LEs were prepared using DPC technique to efficiently encapsulate both drugs. Co-loaded LEs exhibited uniform particle size distribution, desired stability and synchronous release profiles in both drugs. Co-loaded LEs demonstrated superior anti-tumor activity compared with the simple solution mixture and the mixture of single-loaded LEs. Furthermore, co-loaded nanocarriers could co-deliver both drugs into the same cells more efficiently and exhibited the optimized synergistic effect. These results indicate that co-loaded LEs could be a desired formulation for enhanced cancer therapy with potential application prospects. The comparison between co-loaded LEs and mixture formulation is significant for pharmaceutical designs aimed at co-delivery of multiple drugs.

Preparation and in vivo safety evaluations of antileukemic homoharringtonine-loaded PEGylated liposomes

In order to improve the in vivo safety and specific delivery efficiency of the antileukemic homoharringtonine (HHT) at the targets, the long-circulating PEGylated liposomes loaded with HHT (LCLipo-HHT) were prepared. Their physical characteristics, in vitro drug release, in vivo pharmacokinetic properties and elementary toxicity were evaluated. The mean diameter of the prepared LCLipo-HHT is 75.6 ± 3.2 nm and the zeta potential is -16.9 ± 2.5 mV. The entrapment efficiency of HHT in the liposomes is 69.5 ± 1.7%. In pharmacokinetic experiments, an increased plasma concentration as well as blood circulation time was obtained when distearoyl phosphoethanolamine-PEG 2000 lipid was added in the formulation, which results in enhancing drug delivery efficiency. Hemolysis test, vascular irritation test and acute toxicity test were used to demonstrate toxicity of LCLipo-HHT. Compared with clinical HHT injection dosage, LCLipo-HHT indicated no vascular irritation, good hemocompatibility, as well as much better safety. Therefore, the prepared LCLipo-HHT can be used as a promising anticancer formulation for antileukemic therapy in the future.

ATB0,+ transporter-mediated targeting delivery to human lung cancer cells via aspartate-modified docetaxel-loading stealth liposomes

Tumor cells have an increased demand for amino acids to support their rapid growth and malignant metastasis.

Long-circulating lipoprotein-mimic nanoparticles for smart intravenous delivery of a practically-insoluble antineoplastic drug: Development, preliminary safety evaluations and preclinical pharmacokinetic studies

Chlorambucil (CHL) is a water-insoluble antineoplastic drug having a short elimination half-life. It suffers from remarkable differences in pharmacokinetics following oral administration. The current work aimed to assess safety and pharmacokinetics of CHL-loaded, lipoprotein-mimic, nanoparticles (NPs) following intravenous administration. The design of NPs was based on complexation between egg yolk lecithin (EYL) and bovine serum albumin (BSA). The NPs were preliminary evaluated via FT-IR, DSC and P-XRD. The NPs were characterized for particle size, zeta potential, morphology and drug entrapment efficiency (EE%). The best achieved NP dispersion (LP6) and CHL solution were challenged for in vitro hemolytic potential, in vivo vascular irritation studies in rabbits and in vivo pharmacokinetics following intravenous administration in rats. The results confirmed that NPs were stabilized by hydrophobic-attractions and hydrogen-bondings between CHL, BSA and EYL. The amorphous dispersion of CHL within NPs was revealed. LP6 dispersion displayed monodispersed nano-spherical particles (144.33 ± 2.17 nm). It possessed the highest negative zeta potential (-30.55 ± 0.24 mV) and the largest EE% (86.35 ± 2.33%). The significantly (P < 0.05) prolonged MRT(0-∞), longer elimination t50% and reduced plasma clearance highlighted the long-circulating characteristics of LP6. The preliminary safety evaluations and the seven-fold increase in bioavailability elucidated potentiality for smart intravenous delivery of CHL.

Low toxicity and long circulation time of polyampholyte-coated magnetic nanoparticles for blood pool contrast agents

Polyampholyte-coated (poly(acrylic acid) (PAA)-co-3-(diethylamino)-propylamine (DEAPA)) magnetite nanoparticles (PAMNPs) have been prepared as contrasting agent used in magnetic resonance imaging (MRI). Excellent biocompatibility is required for contrasting agents used in high-resolution magnetic resonance angiography. To evaluate the biocompatibility of PAMNPs, some experiments have been conducted. The hemolysis, plasma recalcification, dynamic blood clotting, prothrombin time, inflammatory cytokine release and complement system activation assays were carried out to investigate the hemocompatibility. To evaluate the toxicity to vessel, MTT test and vascular irritation tests were conducted. Tissue toxicity test was also performed to investigate the biocompability in vivo. We also looked into the biodistribution. The results showed that PAMNPs at the working concentration (0.138 mM) present similar hemocompatibility with negative control, thus have no significant effect to vessels. PAMNPs were mainly distributed in the liver and the blood. The circulation time in blood was considerably long, with the half-time of 3.77 h in plasma. This property is advantageous for PAMNPs' use in angiography. PAMNPs could be metabolized rapidly in mice and were not observed to cause any toxic or adverse effect. In short, these results suggest that the PAMNPs have great potential to serve as safe contrast agents in magnetic resonance imaging (MRI).

Protective effects of scutellarin on type II diabetes mellitus-induced testicular damages related to reactive oxygen species/Bcl-2/Bax and reactive oxygen species/microcirculation/staving pathway in diabetic rat

The goal of our study is to evaluate the effect of Scutellarin on type II diabetes-induced testicular disorder and show the mechanism of Scutellarin's action. We used streptozotocin and high-fat diet to establish type II diabetic rat model. TUNEL and haematoxylin and eosin staining were used to evaluate the testicular apoptotic cells and morphologic changes. Immunohistochemical staining was used to measure the expression level of vascular endothelial growth factor and blood vessel density in testes. Oxidative stress in testes and epididymis was tested by fluorescence spectrophotometer and ELISA. The expression of Bcl-2/Bax and blood flow rate in testicular vessels were measured by western blot and Doppler. Our results for the first time showed that hyperglycemia induced apoptotic cells and morphologic impairments in testes of rats, while administration of Scutellarin can significantly inhibit these damages. This effect of Scutellarin is controlled by two apoptotic triggers: ROS/Bcl-2/Bax and ROS/microcirculation/starving pathway.

2, 3-dimercaptosuccinic acid-modified iron oxide clusters for magnetic resonance imaging

Over the last decade, various magnetic nanomaterials have been developed as magnetic resonance imaging (MRI) contrast agents; the greatest challenges encountered for clinical application have been insufficient stability. In this paper, a lyophilization method for 2, 3-dimercaptosuccinic acid-modified iron oxide (γ-Fe2 O3 @DMSA) nanoparticles was developed to simultaneously overcome two disadvantages; these include insufficient stability and low-magnetic response. After lyophilization, the clusters of γ-Fe2 O3 @DMSA with the size of 156.7 ± 15.3 nm were formed, and the stability of the lyophilized powder (γ-Fe2 O3 @DMSA-LP) increased up to over 3 years. It was also found that rehydrated γ-Fe2 O3 @DMSA-LP could be ingested by RAW264.7 cells in very large quantities. Results of pharmacokinetics and biodistribution studies in vivo indicated that γ-Fe2 O3 @DMSA-LP is a promising liver-targeted material. Furthermore, it also exhibited higher MRI efficiency and longer imaging time in the liver than the well-known product Feridex(®) . Moreover, results of vascular irritation and long-term toxicity experiments demonstrated γ-Fe2 O3 @DMSA-LP could be a nontoxic, biocompatible contrast agent in vivo. Therefore, the proposed γ-Fe2 O3 @DMSA-LP can be used as a potential MRI contrast agent in clinic for hepatic diseases.

Barriers to drug delivery in solid tumors

Over the last decade, significant progress has been made in the field of drug delivery. The advent of engineered nanoparticles has allowed us to circumvent the initial limitations to drug delivery such as pharmacokinetics and solubility. However, in spite of significant advances to tumor targeting, an effective treatment strategy for malignant tumors still remains elusive. Tumors possess distinct physiological features which allow them to resist traditional treatment approaches. This combined with the complexity of the biological system presents significant hurdles to the site-specific delivery of therapeutic drugs. One of the key features of engineered nanoparticles is that these can be tailored to execute specific functions. With this review, we hope to provide the reader with a clear understanding and knowledge of biological barriers and the methods to exploit these characteristics to design multifunctional nanocarriers, effect useful dosing regimens and subsequently improve therapeutic outcomes in the clinic.

Improved oral bioavailability of breviscapine via a Pluronic P85-modified liposomal delivery system

Objectives

Breviscapine, a hydrophobic drug used for treating cardiovascular disease, was encapsulated in liposomes to improve its pharmaceutical characteristics. This study describes a novel liposome composition approach to specifically inhibit the P-glycoprotein efflux system.

Methods

Breviscapine-loaded Pluronic P85-coated liposomes were prepared by the thin film hydration technique. The particle size, zeta potential and encapsulation efficiency of the formulations were characterized. In-vitro drug release and permeability of Caco-2 cells were investigated. In-vitro characteristics and pharmacokinetics of the liposomes were evaluated in rat studies.

Key findings

The Pluronic P85-modified liposomes dispersed individually and had an approximate diameter of 118.8 ± 4.9 nm and a zeta potential of −35.4 ± 1.5 mV. Encapsulation efficiency was more than 90%. The use of the P85-coated liposomes resulted in significantly (P &lt; 0.05) increased absorption of breviscapine in Caco-2 cells and in 5.6-fold enhancement in its oral bioavailability in rats.

Conclusion

The P85-modified liposomes for the oral delivery of breviscapine were prepared using l-α-phosphatidylcholine (soy-hydrogenated) and cholesterol with a narrow size distribution. This method seems to effectively enhance the bioavailability of breviscapine in rats.

Solid dispersion tablets of breviscapine with polyvinylpyrrolidone K30 for improved dissolution and bioavailability to commercial breviscapine tablets in beagle dogs

Breviscapine, one of cardiovascular drugs extracted from a Chinese herb Erigeron breviscapinus, has been frequently used to treat cardiovascular diseases such as hypertension, angina pectoris, coronary heart disease and stroke. However, its poor water solubility and low bioavailability in vivo severely restrict the clinical application. To overcome these drawbacks, breviscapine solid dispersion tablets consisting of breviscapine, polyvinylpyrrolidone K30 (PVP K30), microcrystalline cellulose and crospovidone were appropriately prepared. In vitro dissolution profiles showed that breviscapine released percentage of solid dispersion tablets reached 90 %, whereas it was only 40 % for commercial breviscapine tablets. Comparative pharmacokinetic study between solid dispersion tablets and commercial products was investigated on the normal beagle dogs after oral administration. Results showed that the bioavailability of breviscapine was greatly increased by 3.45-fold for solid dispersion tablets. The greatly improved dissolution rate and bioavailability might be attributed to intermolecular hydrogen bonding reactions between PVP K30 and scutellarin. These findings suggest that our solid dispersion tablets can greatly improve the bioavailability as well as the dissolution rate of breviscapine.

Lipid emulsion as a drug delivery system for breviscapine: formulation development and optimization

In this study, we developed an optimized formulation of a breviscapine lipid emulsion (BLE) and evaluated the physicochemical properties and in vivo pharmacokinetics of BLE in rats. For the preparation of the lipid emulsion, soybean oil and oleic acid were used as the oil phase, lecithin and poloxamer 188 as surfactants and glycerol as co-surfactant. An optimized formulation consisting of soybean oil (10.0%), oleic acid (0.9%), lecithin (1.5%), poloxamer 188 (0.4%), and glycerol (2.25%) was selected. The results showed that the average particle size, polydispersity index, and zeta potential of the optimized formulation were 183.5 ± 5.5 nm, 0.098 ± 0.046, and -35.0 ± 2.5 mV, respectively. The BLE was stable for at least three month at room temperature. After a single intravenous dose of 4 mg/kg to rats, the AUC of scutellarin from the lipid emulsion was about 1.5-fold higher than that of the commercial product (breviscapine injection). In conclusion, the optimized formulation of BLE showed positive results over the commercial product in terms of the physicochemical properties and pharmacokinetics of BLE in rats.