Solid-in-oil dispersion: a novel core technology for drug delivery systems

Prolonged joint cavity retention of tranexamic acid achieved by a solid-in-oil-in-gel system: A preliminary study

Tranexamic acid (TXA) is an anti-fibrinolysis agent widely used in postoperative blood loss management. As a highly water-soluble drug, TXA is suffering from rapid clearance from the action site, therefore, large amount of drug is required when administered either by intravenously or topically. In this study, a TXA preparation with prolonged action site residence was designed using the nano-micro strategy. TXA nanoparticles were dispersed in oil by emulsification followed by lyophilization to give a solid-in-oil suspension, which was used as the oil phase for the preparation of TXA-loaded solid-in-oil-in-water (TXA@S/O/W) system. The particle size of TXA in oil was 207.4 ± 13.50 nm, and the particle size of TXA@S/O/W was 40.5 μm. The emulsion-in-gel system (TXA@S/O/G) was prepared by dispersing TXA@S/O/W in water solution of PLGA-b-PEG-b-PLGA (PPP). And its gelling temperature was determined to be 26.6 ℃ by a rheometer. Sustained drug release was achieved by TXA@S/O/G with 72.85 ± 7.52 % of TXA released at 120 h. Formulation retention at the joint cavity was studied by live imaging, and the fluorescent signals dropped gradually during one week. Drug escape from the injection site via drainage and absorption was investigated by a self-made device and plasma TXA concentration determination, respectively. TXA@S/O/G showed the least drug drainage during test, while more than 70 % of drug was drained in TXA@S/O/W group and TXA solution group. Besides, low yet steady plasma TXA concentration (less than 400 ng/mL) was found after injecting TXA@S/O/G into rat knees at a dosage of 2.5 mg/kg, which was much lower than those of TXA dissolved in PPP gel or TXA solution. In conclusion, sustained drug release as well as prolonged action site retention were simultaneously achieved by the designed TXA@S/O/G system. More importantly, due to the steady plasma concentration, this strategy could be further applied to other highly water-soluble drugs with needs on sustained plasma exposure.

The anti-photoaging effect of C-phycocyanin on ultraviolet B-irradiated BALB/c-nu mouse skin

Introduction: C-phycocyanin (C-PC), a photosynthetic protein obtained from Spirulina, is regarded a highly promising commercially available biochemical. Numerous in vitro and in vivo studies have provided evidence of C-PC's ability to mitigate the inflammatory response, alleviate oxidative stress, and facilitate wound healing. However, despite the existing knowledge regarding C-PC's protective mechanism against cellular apoptosis induced by ultraviolet B (UVB) radiation, further in vivo experiments are needed to explore its anti-photoaging mechanism. Methods: In this study, a UVB-induced skin photoaging model was established using BALB/c-nu mice, and the potential protective effects of topically administered c-PC were investigated by various molecular biology tools. In addition, a novel delivery system, C-PC nanodispersion, was developed to facilitate the transdermal delivery of C-PC. Results: C- PC demonstrated significant anti-photoaging activities in the UVB-induced skin. The application of C-PC to the dorsal skin of the mice resulted in improved macroscopic characteristics, such as reduced sagging and coarse wrinkling, under UVB irradiation Histological analyses showed that C-PC treatment significantly decreased the symptoms of epidermal thickening, prevented dermal collagen fiber loosening, increased the hydroxyproline (Hyp) content and activities of antioxidant enzymes (such as superoxide dismutase, catalase, and glutathione peroxidase) in mouse skin, decreased malondialdehyde levels and expressions of inflammatory factors (interleukin-1α [IL-1α], IL-1β, IL-6, and tumor necrosis factor-α), reduced matrix metalloproteinase [MMP-3 and MMP-9] expressions, and inhibited the phosphorylation of c-Jun N-terminal kinase, extracellular signal-regulated kinase, and p38 proteins in the mitogen-activated protein kinase family. Discussion: By analyzing the results of the study, a new drug delivery system, C-PC nano-dispersion, was proposed, and the anti-photoaging effect of C-PC and its mechanism were investigated.

Solid-in-oil nanodispersion as a novel topical transdermal delivery to enhance stability and skin permeation and retention of hydrophilic drugs l-ascorbic acid

l-ascorbic acid （Vitamin C, VC） is the most abundant antioxidant in human skin. But its poor penetration into the skin and unstability limit the application. The aim of the study was to promote the topical skin permeation and retention of VC, increase the stability as well as effectiveness by a novel solid in oil nanodispersion. In the nanodispersions system, nano-sized particles of hydrophilic molecules are dispersed in an oil vehicle with the assistance of hydrophobic surfactants. The optimized formula composed of O170 and S1570 (12.5:1, w/w) showed high EE% of 98% and good stability. FTIR analysis confirmed that there may be hydrogen bond between VC and surfactants. The results of DSC, and XRD revealed that the drug was successfully encapsulated in the surfactants, which maintained the stability of drug. By analyzing and fitting the release data in vitro, the drug release mechanism of SONDs was predicted as a multi-dynamic model. Skin permeation of VC was improved 3.43-fold for SONDs compared with VC aqueous solution, highlighting that the lipophilicity and nano size of the carrier more easily penetrated into the skin. Finally, the photoaging study revealed that topical application of VC-SONDs provided the highest skin protection compared UV and VC aqueous solution treated group which was evident by the normal thick epidermal morphology, no obvious melanocytes and the densely arranged dermal elastic fibers. These results demonstrated that the solid-in-oil nanodispersions may be a potential transdermal delivery system for hydrophilic bioactive ingredients.

Preparation and evaluation of ascorbyl glucoside and ascorbic acid solid in oil nanodispersions for corneal epithelial wound healing

The objective of this study was to develop and evaluate an effective topical formulation to promote corneal epithelial wound healing. Ascorbyl glucoside (AA-2G), a stable prodrug of AA, was formulated in solid in oil (S/O) nanodispersions by emulsifying AA-2G solutions in cyclohexane using Span 85 as an emulsifying agent and freeze-drying emulsions to produce AA-2G - surfactant complex. The complexes were then dispersed in castor oil to produce S/O nanodispersions which were evaluated in terms of their particle size, polydispersity index, encapsulation efficiency, morphology, physical stability as well as the transcorneal permeation and accumulation of AA-2G. The same preparation procedure was used to prepare S/O nanodispersions of AA. S/O nanodispersions of AA and AA-2G were formulated into oily drops that were tested for efficacy in promoting wound healing after corneal epithelial depredation. AA-2G was loaded efficiently in S/O nanodispersions (EE > 99%) in the form of spherical nanoparticles. S/O nanodispersions were physically stable and resulted in improved permeation (18x) and accumulation (7x) of AA-2G in transcorneal diffusion experiments in comparison to AA-2G solutions. Oily eye drops of AA-2G and AA showed no irritation and significant improvement in epithelial healing in vivo in comparison to AA-2G and AA solutions.

Surface biofunctionalization of the decellularized porcine aortic valve with VEGF-loaded nanoparticles for accelerating endothelialization

The original intention for building a tissue-engineered heart valve (TEHV) was to simulate a normal heart valve and overcome the insufficiency of the commonly used heart valve replacement in the clinic. The endothelialization of the TEHV is very important as the endothelialized TEHV can decrease platelet adhesion and delay the valvular calcification decline process. In this work, we encapsulated vascular endothelial growth factor (VEGF) into polycaprolactone (PCL) nanoparticles. Then, through the Michael addition reaction, PCL nanoparticles were introduced onto the decellularized aortic valve to prepare a hybrid valve. The encapsulation efficiency of the PCL nanoparticles for VEGF was up to 82%, and the in vitro accumulated release rate was slow without an evident initial burst release. In addition, the hybrid valve had a decreased hemolysis ratio and possessed antiplatelet adhesion capacity, and it was able to promote the adhesion and proliferation of endothelial cells, covering the surface with a dense cell layer to accelerate endothelialization. An experiment involving the subcutaneous implant in SD rats showed that at week 8, lots of blood capillaries were formed in the hybrid valve. Mechanics performance testing indicated that the mechanical property of the hybrid valve was partly improved. Taken together, we applied a nano-drug controlled release system to fabricate TEHV, and provide an approach for the biofunctionalization of the TEHV scaffold for accelerating endothelialization.

Mechanistic investigation of transcutaneous protein delivery using solid-in-oil nanodispersion: A case study with phycocyanin

Phycocyanin (PC), a water-soluble protein-chromophore complex composed of hexameric (αβ)₆ subunits, has important biological functions in blue-green algae as well as pharmacological activities in biomedicine. We have previously developed a solid-in-oil (S/O) nanodispersion method to deliver biomacromolecules through the skin, although the transcutaneous mechanism has not yet been fully elucidated. To study the mechanism of transcutaneous protein delivery, we therefore enabled S/O nanodispersion by coating PC with hydrophobic surfactants and evaluated how the proteinaceous macromolecules formulated in an oil phase might permeate the skin. The extent of S/O nanodispersion of PC was dependent on the type of surfactant, suggesting that the selection of a suitable surfactant is crucial for encapsulating a large protein having a subunit structure. By measuring the intrinsic fluorescence of PC, we found that S/O nanodispersion facilitated the accumulation of PC in the stratum corneum (SC) of Yucatan micropig skin. Furthermore, after crossing the SC layer, the fluorescent recovery of PC was evident, indicating the release of the biologically active form of PC from the SC into the deeper skin layer.

Transcutaneous pollinosis immunotherapy using a solid-in-oil nanodispersion system carrying T cell epitope peptide and R848

Antigen‐specific immunotherapy is the only curative approach for the treatment of allergic diseases such as Japanese cedar pollinosis. Immunotherapy using a T cell epitope vaccine in combination with the adjuvant R848 is of particular interest as a safe and effective approach to treat allergic diseases. Herein, we propose a simple and easy to handle vaccine administration method using the original solid‐in‐oil (S/O) nanodispersion system that permeates through the skin. The S/O nanodispersion system is composed of nanoparticles of hydrophilic molecules surrounded with hydrophobic surfactants that are dispersed in an oil vehicle. The system has potential to carry and deliver both hydrophilic and hydrophobic bioactives. Hydrophilic T cell epitope peptide was efficiently delivered through mouse skin using the S/O nanodispersion system and lowered antigen‐specific IgE levels in pollinosis model mice. Addition of the hydrophobic adju1vant R848 significantly lowered the antibody secretion and shifted the Th1/Th2‐balance toward Th1‐type immunity in the model mice, showing the potential to alleviate Japanese cedar pollinosis.

Solid-in-oil nanodispersions for transdermal drug delivery systems

Transdermal administration of drugs has advantages over conventional oral administration or administration using injection equipment. The route of administration reduces the opportunity for drug evacuation before systemic circulation, and enables long-lasting drug administration at a modest body concentration. In addition, the skin is an attractive route for vaccination, because there are many immune cells in the skin. Recently, solid-in-oil nanodisperison (S/O) technique has demonstrated to deliver cosmetic and pharmaceutical bioactives efficiently through the skin. S/O nanodispersions are nanosized drug carriers designed to overcome the skin barrier. This review discusses the rationale for preparation of efficient and stable S/O nanodispersions, as well as application examples in cosmetic and pharmaceutical materials including vaccines. Drug administration using a patch is user-friendly, and may improve patient compliance. The technique is a potent transcutaneous immunization method without needles.

The molecular assembly of the ionic liquid/aliphatic carboxylic acid/aliphatic amine as effective and safety transdermal permeation enhancers

In spite of numerous advantages, transdermal drug delivery systems are unfeasible for most drugs because of the barrier effect of the stratum corneum. Ionic liquids were recently used to enhance transdermal drug delivery by improving drug solubility. In the present study, safe and effective ionic liquids for transdermal absorption were obtained as salts generated by a neutralization reaction between highly biocompatible aliphatic carboxylic acids (octanoic acid or isostearic acid) and aliphatic amines (diisopropanolamine or triisopropanolamine) (Medrx Co., Ltd., 2009). The mechanism of skin permeability enhancement by ionic liquids was investigated by hydrophilic phenol red and hydrophobic tulobuterol. Further, the skin permeation enhancing effect was remarkably superior in the acid excess state rather than the neutralization state. Infrared absorption spectrum analysis confirmed that ionic liquids/aliphatic carboxylic acid/aliphatic amine are coexisting at all mixing states. In the acid excess state, ionic liquids interact with aliphatic carboxylic acids via hydrogen bonds. Thus, the skin permeation enhancing effect is not caused by the ionic liquid alone. The "liquid salt mixture," referred to as a complex of ingredients coexisting with ionic liquids, forms a molecular assembly incorporating hydrophilic drug. This molecular assembly was considered an effective and safety enhancer of transdermal drug permeation.

Transcutaneous immunization against cancer using solid-in-oil nanodispersions

Solid-in-oil nanodispersions allowed cancer antigens to penetrate into skin to induce antigen-specific cancer immunity.

Transdermal immunization using solid-in-oil nanodispersion with CpG oligodeoxynucleotide adjuvants

PURPOSE

Simple and noninvasive vaccine administration alternatives to injections are desired. A solid-in-oil (S/O) nanodispersion system was able to overcome skin barriers and induce an immune response; however, antibody levels remained low. We applied an immune potentiator, CpG oligodeoxynucleotide (ODN), to enhance the immune response by controlling the T helper 1 (Th1)/T helper 2 (Th2) balance.

METHODS

S/O nanodispersions containing ovalbumin (OVA) and CpG ODN (CpG-A or CpG-B) were characterized by size distribution analysis and a protein release test. The skin permeation of fluorescence-labeled OVA was observed by fluorescence microscopy. Antigen-specific IgG, IgG1, and IgG2a responses were measured by enzyme-linked immunosorbent assay.

RESULTS

Co-encapsulation of CpG ODNs in S/O nanodispersions enhanced induction of OVA-specific IgG. S/O nanodispersion containing OVA and CpG-A had a smaller mean particle size and permeated the skin more efficiently. In contrast, CpG-B showed the highest protein release and induction of OVA-specific IgG. IgG subclass analysis revealed that OVA induced a Th2-dominant immune response, while the S/O nanodispersion containing CpG-A skewed the immune response toward a Th1-bias.

CONCLUSIONS

In combination with CpG ODN, the S/O nanodispersion system efficiently induced an antigen-specific antibody response. The Th1/Th2 immune balance could be controlled by the selection of CpG ODN type.

A novel surface-coated nanocarrier for efficient encapsulation and delivery of camptothecin to cells

In the present study, we developed a novel surface-coated nanocarrier (SCN) for efficient and stable encapsulation of a poorly water-soluble anticancer agent, camptothecin (CPT).

Micro-porous surfaces in controlled drug delivery systems: design and evaluation of diltiazem hydrochloride controlled porosity osmotic pump using non-ionic surfactants as pore-former

The major problem associated with conventional drug delivery systems is unpredictable plasma concentrations. The aim of this study was to design a controlled porosity osmotic pump (CPOP) of diltiazem hydrochloride to deliver the drug in a controlled manner. CPOP tablets were prepared by incorporation of drug in the core and subsequent coating with cellulose acetate as semi-permeable membrane. Non-ionic surfactants were applied as pore-formers as well. The effect of pore-formers concentration on the in vitro release of diltiazem was also studied. The formulations were compared based on four comparative parameters, namely, total drug released after 24 h (D24 h), lag-time (tL), squared correlation coefficient of zero order equation (RSQzero) and mean percent deviation from zero order kinetic (MPDzero). Results of scanning electron microscopy studies exhibited formation of pores in the membrane from where the drug release occurred. It was revealed that drug release rate was directly proportional to the concentration of the pore-formers. The value of D24 h in the formulations containing Tween 80 (10%) and Brij 35 (5%) were found to be more than 94.9%, and drug release followed zero order kinetic (RSQzero > 0.99 and MPDzero < 8%) with acceptable tL (lower than 1 h).