Drug carriers in osteoporosis: preparation, drug encapsulation and applications

Enhanced Cell Osteogenic Differentiation in Alendronate Acid and Flufenamic Acid Drug-Impregnated Nanoparticles of Mesoporous Bioactive Glass Composite Calcium Phosphate Bone Cement In Vitro

This study aims to compare the anti-osteoporotic drugs alendronic acid (ALN) and flufenamic acid (FA) alone impregnate into nanoparticles of mesoporous bioactive glass (nMBG), which further composites calcium phosphate cement (CPC) and investigates their in vitro performance. The drug release, physicochemical properties, and biocompatibility of nMBG@CPC composite bone cement are tested, and the effect of the composites on improving the proliferation and differentiation efficiency of mouse precursor osteoblasts (D1 cells) is also investigated. Drug release shows that FA impregnates nMBG@CPC composite, a large amount of FA is released rapidly within 8 h, gradually reaching a stable release within 12 h, followed by a slow and sustained release within 14 days, and then reaches a plateau within 21 days. The release phenomenon confirms that the drug-impregnated nBMG@CPC composite bone cement effectively achieves slow drug delivery. The working time and setting time of each composite are within 4-10 min and 10-20 min, respectively, meeting the operational requirements of clinical applications. The addition of nMBG nanoparticles in the CPC matrix did not prevent the aggregation phenomenon under microstructural observation, thus resulting in a decrease in the strength of the nMBG@CPC composite. However, after 24 h of immersed reaction, the strength of each 5 wt.% nMBG impregnated with different concentrations of FA and ALN is still greater than 30 MPa, which is higher than the general trabecular bone strength. The drug-impregnated nMBG@CPC composites did not hinder the product formation and exhibit biocompatibility. Based on the proliferation and mineralization of D1 cells, the combination of nMBG with abundant FA and ALN in CPC is not conducive to the proliferation of D1 cells. However, when D1 cells are contact cultured for 21 days, alkaline phosphatase (ALP) enzyme activity shows higher ALP secretion from drug-impregnated nMBG@CPC composites than drug-free composites. Accordingly, this study confirms that nMBG can effectively impregnate the anti-osteoporosis drugs FA and ALN, and enhance the mineralization ability of osteoblasts. Furthermore, drug-impregnated nMBG applications can be used alone or in combination with CPC as a new option for osteoporotic bone-filling surgery.

Nano-Hydroxyapatite Composite Scaffolds Loaded with Bioactive Factors and Drugs for Bone Tissue Engineering

Nano-hydroxyapatite (n-HAp) is similar to human bone mineral in structure and biochemistry and is, therefore, widely used as bone biomaterial and a drug carrier. Further, n-HAp composite scaffolds have a great potential role in bone regeneration. Loading bioactive factors and drugs onto n-HAp composites has emerged as a promising strategy for bone defect repair in bone tissue engineering. With local delivery of bioactive agents and drugs, biological materials may be provided with the biological activity they lack to improve bone regeneration. This review summarizes classification of n-HAp composites, application of n-HAp composite scaffolds loaded with bioactive factors and drugs in bone tissue engineering and the drug loading methods of n-HAp composite scaffolds, and the research direction of n-HAp composite scaffolds in the future is prospected.

Bone-Targeting Polymer Vesicles for Effective Therapy of Osteoporosis

With the aging of the population, postmenopausal osteoporosis becomes increasingly widespread and severe as fractures caused by osteoporosis may lead to permanent disabilities and even death. Inspired by extracellular vesicles that participate in bone remodeling, we present a biomimicking polymer vesicle for bone-targeted β-estradiol (E₂) delivery. This vesicle is self-assembled from a poly(ε-caprolactone)₂₈-block-poly[(l-glutamic acid)₇-stat-(l-glutamic acid-alendronic acid)₄] (PCL₂₈-b-P[Glu₇-stat-(Glu-ADA)₄]) diblock copolymer. The alendronic acid (ADA) on the coronas endows the polymer vesicles with a high bone affinity and acts synergistically with E₂ to achieve an enhanced therapeutic effect. As confirmed with ovariectomized osteoporosis rat models, bone loss was significantly reversed as the recovery rates of total BMD (bone mineral density) and trabecular BMD were 70.4% and 99.3%, respectively. Overall, this work provides fresh insight into the treatment of osteoporosis.

Alendronate-Decorated Nanoparticles as Bone-Targeted Alendronate Carriers for Potential Osteoporosis Treatment

Osteoporosis is a skeletal disorder characterized by a low bone mass and density. Alendronate (Alen), a second-generation bisphosphonate drug, was indicated as the first-line regimen for the treatment of osteoporosis. However, the use of Alen has been limited due to its low bioavailability and gastrointestinal side effects. Herein, Alen-decorated nanoparticles were prepared through ionic cross-linking between poly (lactic-co-glycolic acid), β-cyclodextrin-modified chitosan (PLGA-CS-CD), and Alen-modified alginate (ALG-Alen) for Alen loading and bone-targeted delivery. Alen was selected as a therapeutic drug and a bone-targeting ligand. The nanoparticles have negatively charged surfaces, and sustained release of Alen from the nanoparticles can be observed. Cytotoxicity detected using cell counting kit-8 (CCK-8) assay and lactate dehydrogenase release test on MC3T3 cells showed that the nanoparticles had good cytocompatibility. A hemolysis test showed that the hemolysis ratios of nanoparticles were <5%, indicating that the nanoparticles had no significant hemolysis effect. Moreover, the Alen-decorated nanoparticles exhibited enhanced binding affinity to the hydroxyapatite (HAp) disks compared with that of nanoparticles without Alen modification. Thus, the Alen-decorated nanoparticles might be developed as promising bone-targeted carriers for the treatment of osteoporosis.

Alendronate Sodium Intercalation in Layered Double Hydroxide/Poly (ε-caprolactone): Application in Osteoporosis Treatment

Background:

Osteoporosis is a bone disease alters the amount and variety of proteins in bone tissue and increases the potential of bone fracture. Antiresorptive therapy is one of the most popular treatment methods for osteoporosis. To reduce side effects and enhance the bioavailability of drug agents, the controlled delivery of drug is commonly utilized.

Objectives:

We investigated the controlled release of Alendronate in different composites of layered double hydroxide (LDH) using poly (ε-caprolactone) (PCL) as a matrix.

Materials and Methods:

We prepared different microsphere composites of ALD intercalated in various amounts of LDH, using PCL as a matrix. The controlled release of ALD from these composites is subsequently investigated. Samples are characterized and in vitro cell cytotoxicity, attachment, osteogenic activity including alkaline phosphatase activity and mineralization are examined using MG-63 human osteosarcoma cells.

Results:

The results showed that the release of ALD is more desirable and controlled in the samples having a higher amount of LDH incorporated into the PCL matrix. MG63 cells show a significant increase in viability, attachment, and mineralization while alkaline phosphatase activity remains almost at a constant level after 3 weeks.

Conclusions:

Overall, the findings showed that by incorporation of 15 wt% of LDH, the composite microsphere is capable of holding the antiresorptive drug longer and release it in a more controlled manner. This is an advantageous and promising characteristic for a carrier that could be used as a potential candidate for osteoporosis treatment.

In vitro effects of the co-release of icariin and strontium from bioactive glass submicron spheres on the reduced osteogenic potential of rat osteoporotic bone marrow mesenchymal stem cells

Osteoporosis is a metabolic disease that affects bone tissue and is highly associated with bone fractures. Typical osteoporosis fracture treatments, such as bisphosphonates and hormone replacement, present important challenges because of their low bioavailability on the site of action. Options to overcome this issue are systems for the local release of therapeutic agents such as bioactive glasses containing therapeutic molecules and ions. These agents are released during the dissolution process, combining the drugs and ion therapeutic effects for osteoporosis treatment. Among the therapeutic agents that can be applied for bone repair are strontium (Sr) ion and phytopharmaceutical icariin, which have shown potential to promote healthy bone marrow stem cells osteogenic differentiation, increase bone formation and prevent bone loss. Submicron Sr-containing bioactive glass mesoporous spheres with sustained ion release capacity were obtained. Icariin was successfully incorporated into the particles, and the glass composition influenced the icariin incorporation efficiency and release rates. In this work, for the first time, Sr and icariin were incorporated into bioactive glass submicron mesoporous spheres and the in vitro effects of the therapeutic agents release were evaluated on the reduced osteogenic potential of rat osteoporotic bone marrow mesenchymal stem cells, and results showed an improvement on the reduced differentiation potential.

Long-term delivery of alendronate through an injectable tetra-PEG hydrogel to promote osteoporosis therapy

Pharmacotherapy for hypercalcemia, which is mainly caused by osteoporosis, is an effective method to regulate the in vivo calcium equilibrium. From this perspective, the development of a minimally invasive gelling system for the prolonged local delivery of bisphosphonates has practical significance in the clinical therapy of bone osteoporosis. Here, a biocompatible and injectable hydrogel based on a uniform tetra-PEG network carrying a PEG-modified alendronate (ALN) prodrug for the localized elution and long-term sustained release of anti-osteoporotic small molecule drugs is reported. The obtained ALN-based tetra-PEG hydrogels exhibit rapid gel formation and excellent injectability, thereby allowing for the easy injection and consequent adaptation of hydrogels into the bone defects with irregular shapes, which promotes the ALN-based tetra-PEG hydrogels with depot formulation capacity for governing the on-demand release of ALN drugs and local reinforcement of bone osteoporosis at the implantation sites of animals. The findings imply that these injectable hydrogels mediate the optimized release of therapeutic cargoes and effectively promote in situ bone regeneration via minimally invasive procedures, which is effective for clinical osteoporosis therapy.

Pamidronate-Encapsulated Electrospun Polycaprolactone-Based Composite Scaffolds for Osteoporotic Bone Defect Repair

Bone fractures associated with osteoporosis are a major concern all over the world especially among the elderly population and postmenopausal women. Bisphosphonates (BPs) are widely used clinically for both treatment and prevention of osteoporosis despite their poor oral bioavailability and undesired side effects. Local delivery of BPs from polymeric scaffolds can improve the efficacy and overcome the undesirable side effects associated with oral bisphosphonate therapy. The aim of the present study is to explore the effectiveness of pamidronate (PDS) encapsulated electrospun polycaprolactone/polycaprolactone-polyethyleneglycol-polycaprolactone/nanohydroxyapatite (PCH) scaffolds in healing critical-size calvarial defects in an osteoporotic rat animal model. Prior to implantation studies, the effect of PDS on the fiber architecture, mechanical properties, and in vitro degradation behavior was evaluated. The in vitro release of PDS from PCH scaffolds in phosphate buffer saline (PBS) at 37 °C was monitored for a period of 21 days. An osteoporotic animal model was successfully developed in Wistar rats by bilateral ovariectomy. Results of micro CT (computed tomography) and blood serum analysis confirmed the osteoporotic model induction in rats. Critical-size calvarial defects of 8 mm size were created in osteoporotic rats, and the in vivo osteogenic efficacy of PCH-PDS scaffolds was evaluated by micro CT, histology, and histomorphometry. Micro CT analysis showed improved osseous tissue integration with the use of PDS-loaded PCH scaffolds after 12 week post implantation. Histology, density measurement using micro CT, and histomorphometry further substantiate that PCH-PDS scaffolds have the potential to be used for the repair of osteoporotic bone defects. Our findings revealed that incorporation of PDS onto PCH scaffolds provides a promising biomaterial that could be used for regenerating osteoporosis-related fractures.

Oral Delivery of Teriparatide Using a Nanoemulsion System: Design, in Vitro and in Vivo Evaluation

PURPOSE

Investigate the possibility of delivering teriparatide orally using nanoemulsion.

METHOD

Teriparatide was allowed to interact with chitosan in the presence of HPβCD.The formed polyelectrolyte complex (PEC) was characterized by DSC, FTIR, DLS and for entrapment efficiency. PEC was the incorporated in an oil phase consisting of Oleic Acid, Labrasol and Plurol Oleique to form a nanoemulsion. This preparation was characterized for refractive index, viscosity, pH, conductivity, particle size, and morphology.Bioavailability of the preparation was evaluated using rabbits against SC injection. The efficacy of the formula was tested using ovariectomized rats (an osteoporosis animal model) and mechanical and histological tests were conducted on their bones. The stability of the preparation was evaluated by storing samples at 4^o C, 25^o C and 40^o C for three months.

RESULTS

PEC testing demonstrate a complex formation with particle size of 208 nm, zeta potential of +17 mV and entrapment efficiency of 49%. For the nanoemulsion, the results demonstrate the formation of a nano-sized dispersed system (108 nm) with a drug loading of 98% and a percent protection of 90% and 71% in SGF and SIF respectively. Bioavailability results showed a sustained release profile was achieved following the oral formulation administration. Efficacy studies showed improvement in the strength, thickness and connectivity of bones. Short-term stability study demostrated that the nanoemulsion is mostly stable at 4^o C.

CONCLUSION

These findings demonstrate the ability of delivering Teriparatide orally using oleic acid based dispersion in combination with chitosan PEC.

Preparation and characterization of Alendronate depot microspheres based on novel poly(-ε-caprolactone)/Vitamin E TPGS copolymers

In the present study, new aledronate (AL) loaded microspheres were prepared with the use of polycaprolactone (PCL)/Vitamin E d-ɑ-tocopheryl poly(ethylene glycol) 1000 succinate (TPGS) copolymers. Specifically, PCL-TPGS copolymers, prepared at several PCL to TPGS ratios (namely, 90/10, 80/20, 70/30 and 60/40 w/w) via a ring opening polymerization process, were characterized by intrinsic viscosity, proton nuclear magnetic resonance (¹H NMR), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and enzymatic hydrolysis. Results showed that as TPGS content increases the intrinsic viscosity of the copolymer (and hence, the viscosity-average molecular weight) is decreasing, while FTIR analysis showed the formation of hydrogen bonds between the —C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]>O of PCL and the —OH of TPGS. Additionally, XRD analysis indicated that the prepared copolymers were semi-crystalline in nature, while enzymatic hydrolysis studies showed that increasing TGPS content led to increasing copolymer hydrolysis. In the following step, AL drug-loaded microspheres were prepared via single emulsification process. Scanning electron microscopy (SEM) revealed the formation of coarse drug-loaded microspheres with particle size close to 5 μm, while XRD analysis showed that the API was amorphously dispersed only in the cases of high TPGS content. Furthermore, FTIR analysis showed that the API did not interact with the copolymer components, while in vitro drug release studies showed that increasing PCL content led to decreasing API release rate. Finally, analysis of the drug release profiles suggested that the API release mechanism was solely governed by the polymer matrix erosion.

Pamidronate-encapsulated electrospun polycaprolactone as a potential bone regenerative scaffold

This study explores the potential of electrospun polycaprolactone scaffolds for the controlled delivery of pamidronate disodium pentahydrate, an amino-bisphosphonate drug used for the treatment of osteoporosis. Major drawbacks associated with oral bisphosphonate therapy are its poor bioavailability and gastrointestinal side-effects. Herein, we used polycaprolactone, a well-known Food and Drug Administration–approved biomaterial, as the delivering vehicle for pamidronate disodium pentahydrate. Scaffolds based on polycaprolactone with three different formulations (1, 3, and 5 wt%) of pamidronate disodium pentahydrate were fabricated by electrospinning, and a comparative study was carried out to evaluate the effect of pamidronate disodium pentahydrate on physico-mechanical and biological properties of polycaprolactone. The observations from Fourier-transform infrared spectra and thermogravimetric analysis confirmed the successful incorporation of pamidronate disodium pentahydrate into polycaprolactone scaffolds. The study also revealed that pamidronate disodium pentahydrate–loaded scaffolds exhibited improved hydrophilicity as well as superior mechanical properties as depicted by the contact angle measurements and mechanical property evaluation. In vitro drug release studies of pamidronate disodium pentahydrate–loaded scaffolds in phosphate buffer saline at 37°C showed that all the scaffolds exhibited controlled release of pamidronate disodium pentahydrate. In vitro degradation studies further revealed that pamidronate disodium pentahydrate incorporated polycaprolactone scaffolds degraded faster as depicted by the fiber rupture and drop in mechanical properties. In vitro cell culture studies using human osteosarcoma cell lines demonstrated that pamidronate disodium pentahydrate–loaded polycaprolactone scaffolds were cytocompatible. The human osteosarcoma cells had favorable interaction with the scaffolds, and the viability of adhered cells was depicted by the fluorescein diacetate/propidium iodide staining. MTT assay further revealed enhanced cell viability on PCL/PDS3 scaffolds. Our findings bespeak that the pamidronate disodium pentahydrate–encapsulated electrospun polycaprolactone scaffolds have the potential to serve as a promising drug delivery vehicle for osteoporotic bone defect repair.

Drug Delivery From Polymer-Based Nanopharmaceuticals-An Experimental Study Complemented by Simulations of Selected Diffusion Processes

The success of medical therapy depends on the correct amount and the appropriate delivery of the required drugs for treatment. By using biodegradable polymers a drug delivery over a time span of weeks or even months is made possible. This opens up a variety of strategies for better medication. The drug is embedded in a biodegradable polymer (the "carrier") and injected in a particular position of the human body. As a consequence of the interplay between the diffusion process and the degrading polymer the drug is released in a controlled manner. In this work we study the controlled release of medication experimentally by measuring the delivered amount of drug within a cylindrical shell over a long time interval into the body fluid. Moreover, a simple continuum model of the Fickean type is initially proposed and solved in closed-form. It is used for simulating some of the observed release processes for this type of carrier and takes the geometry of the drug container explicitly into account. By comparing the measurement data and the model predictions diffusion coefficients are obtained. It turns out that within this simple model the coefficients change over time. This contradicts the idea that diffusion coefficients are constants independent of the considered geometry. The model is therefore extended by taking an additional absorption term into account leading to a concentration dependent diffusion coefficient. This could now be used for further predictions of drug release in carriers of different shape. For a better understanding of the complex diffusion and degradation phenomena the underlying physics is discussed in detail and even more sophisticated models involving different degradation and mass transport phenomena are proposed for future work and study.

Development of local strontium ranelate delivery systems and long term in vitro drug release studies in osteogenic medium

It has been recognized that the operative stabilization of osteoporotic fractures should be followed up with an appropriate osteoporosis treatment in order to decrease the risk of repeated fractures. Despite the good clinical results of strontium ranelate (SrRan) towards the osteoporosis treatment, high drug doses and long treatment period cause an increased risk of serious side effects. Novel local SrRan/poly(lactic acid) (SrRan/PLA) delivery systems containing from 3.57 ± 0.28 wt% to 24.39 ± 0.91 wt% of active substance were developed. In order to resemble the naturally occurring processes, osteogenic media (OM) was used as a release medium for long term (121 days) in vitro drug release studies and UV/VIS method for the determination of SrRan content in OM was developed and validated. Biomimetic calcium phosphate precipitates were found on the surface and in the pores of prepared delivery system after microcapsule exposure to OM for 121 days as well as SrRan particles, indicating that the release of the drug have not been completed within 121 days. In vitro cell viability evaluation approved no cytotoxic effects of microcapsule suspensions and extracts.

Fab on a Package: LTCC Microfluidic Devices Applied to Chemical Process Miniaturization

Microfluidics has brought diverse advantages to chemical processes, allowing higher control of reactions and economy of reagents and energy. Low temperature co-fired ceramics (LTCC) have additional advantages as material for fabrication of microfluidic devices, such as high compatibility with chemical reagents with typical average surface roughness of 0.3154 μm, easy scaling, and microfabrication. The conjugation of LTCC technology with microfluidics allows the development of micrometric-sized channels and reactors exploiting the advantages of fast and controlled mixing and heat transfer processes, essential for the synthesis and surface functionalization of nanoparticles. Since the chemical process area is evolving toward miniaturization and continuous flow processing, we verify that microfluidic devices based on LTCC technology have a relevant role in implementing several chemical processes. The present work reviews various LTCC microfluidic devices, developed in our laboratory, applied to chemical process miniaturization, with different geometries to implement processes such as ionic gelation, emulsification, nanoprecipitation, solvent extraction, nanoparticle synthesis and functionalization, and emulsion-diffusion/solvent extraction process. All fabricated microfluidics structures can operate in a flow range of mL/min, indicating that LTCC technology provides a means to enhance micro- and nanoparticle production yield.

Targeting to the Bone: Alendronate-Directed Combretastatin A-4 Bearing Antiangiogenic Polymer-Drug Conjugates

Selective targeting of tumor site with chemotherapeutic agents appears to be one of the most effective methods to address many of the problems encountered with conventional chemotherapy. In this work, poly(oligoethylene glycol)methacrylate (POEGMA) based bone-targeting polymers bearing an antiangiogenic drug combretastatin A4 (CA4) were synthesized using free radical polymerization. Targeted and nontargeting copolymers were evaluated for their bone targeting efficiency, cytotoxicities against endothelial cells, namely, HUVECs and U2-OS and Saos-2 cancerous cell lines, as well as their antiangiogenic activity against endothelial cell tube formation by HUVECs. It is observed that the drug conjugated polymers conjugated with the bisphosphonate groups containing drug alendronate (ALN) have remarkably high affinity for bone mineral when compared to the polymer-drug conjugates devoid of the bisphosphonate groups. Both targeted and nontargeted polymer-drug conjugates show a sustained drug release in rat plasma with an overall release of 80-93% over 5 days. In vitro studies revealed high levels of cytotoxicity of the polymer-drug conjugates against HUVECs and U2-OS, and moderate cytotoxicity toward Saos-2. Importantly, the CA4 conjugated copolymers displayed excellent level of antiangiogenic activity as deduced from in vitro endothelial cell tube formation assay using HUVECs. Overall, a novel bone-targeting antiangiogenic polymer-drug conjugate that can be further elaborated to carry additional anticancer drugs is disclosed.

Advances in Controlled Drug Delivery for Treatment of Osteoporosis

Osteoporosis, which is characterized by resorption of bone exceeding formation, remains a significant human health concern, and the impact of this condition will only increase with the "graying" of the worldwide population. This review focuses on current and emerging approaches for delivering therapeutic agents to restore bone remodeling homeostasis. Well-known antiresorptive and anabolic agents, such as estrogen, estrogen analogs, bisphosphonates, calcitonin, and parathyroid hormone, along with newer modulators and antibodies, are primarily administered orally, intravenously, or subcutaneously. Although these treatments can be effective, continuing problems include patient noncompliance and adverse systemic or remote-site effects. Controlled drug delivery via polymeric, targeted, and active release systems extends drug half-life by shielding against premature degradation and improves bioavailability while also providing prolonged, sustained, or intermittent release at therapeutic doses to more effectively treat osteoporosis and associated fracture risk.

Alendronate-Loaded Modified Drug Delivery Lipid Particles Intended for Improved Oral and Topical Administration

The present paper focuses on solid lipid particles (SLPs), described in the literature as the most effective lipid drug delivery systems that have been introduced in the last decades, as they actually combine the advantages of polymeric particles, hydrophilic/lipophilic emulsions and liposomes. In the current study, we present our most recent advances in the preparation of alendronate (AL)-loaded SLPs prepared by hot homogenization and ultrasonication using various ratios of a self-emulsifying lipidic mixture of Compritol 888, Gelucire 44/14, and Cremophor A 25. The prepared AL-loaded SLPs were investigated for their physicochemical, morphological and structural characteristics by dynamic light scattering, differential scanning calorimetry, thermogravimetric and powder X-ray diffraction analysis, infrared spectroscopy, optical and scanning electron microscopy. Entrapment efficacy and actual drug content were assessed by a validated HPLC method. In vitro dissolution tests performed in simulated gastro-intestinal fluids and phosphate buffer solution pH 7.4 revealed a prolonged release of AL of 70 h. Additionally, release kinetics analysis showed that both in simulated gastrointestinal fluids and in phosphate buffer solution, AL is released from SLPs based on equal ratios of lipid excipients following zero-order kinetics, which characterizes prolonged-release drug systems.

Plant extracts: from encapsulation to application

INTRODUCTION

Plants are a natural source of various products with diverse biological activities offering treatment for several diseases. Plant extract is a complex mixture of compounds, which can have antioxidant, antibiotic, antiviral, anticancer, antiparasitic, antifungal, hypoglycemic, anti-hypertensive and insecticide properties. The extraction of these extracts requires the use of organic solvents, which not only complicates the formulations but also makes it difficult to directly use the extracts for humans. To overcome these problems, recent research has been focused on developing new ways to formulate the plant extracts and delivering them safely with enhanced therapeutic efficacy.

AREAS COVERED

This review focuses on the research done in the development and use of polymeric nanoparticles for the encapsulation and administration of plant extracts. It describes in detail, the different encapsulation techniques, main physicochemical characteristics of the nanoparticles, toxicity tests and results obtained from in vivo or in vitro assays.

EXPERT OPINION

Major obstacles associated with the use of plant extracts for clinical applications include their complex composition, toxicity risks and extract instability. It is observed that encapsulation can be successfully used to decrease plant extracts toxicity, to provide targeted drug delivery and to solve stability related problems.

Formulation and In Vitro Evaluation of Alendronate Sodium/PLGA Microspheres for Applications in Bone Related Disorders

ABSTRACT: Purpose - Bisphosphonates are a group of drugs that can be used in the development of new therapies for bone disorders. Microencapsulation by solvent evaporation is a method that results in microspheres with controlled release of the drug. The purpose of the present study was to include sodium alendronate (AL) in poly (lactic-co-glycolic acid) (PLGA) microspheres with a good encapsulation rate. Furthermore it was intended to obtain a prolonged release of the drug over a period of time. Material and methods - Microspheres were prepared by water/oil/water solvent evaporation method. The microspheres were characterized by FTIR analysis using an Avatar Nicolet spectrophotometer. Both encapsulation ratio and in vitro drug release were assessed by chromatographic analysis. Results - The method chosen for sodium alendronate incorporation resulted in microspheres with a good entrapment efficiency. The in vitro drug release from PLGA/AL microspheres was maintained up to 21 days. This suggests that the microspheres had a sustained releasing tendency. Conclusion - Given the prolonged release, PLGA/AL microspheres may be used in a controlled release system with applications in bone disease treatment.

Preparation of an injectable depot system for long-term delivery of alendronate and evaluation of its anti-osteoporotic effect in an ovariectomized rat model

We prepared an injectable depot system for the long-term delivery of alendronate using a solid/water/oil/water multiple emulsion technique with poly(lactic-co-glycolic acid) as a carrier. The microparticles were spherical with smooth surfaces, ranging from 20 to 70 μm in size. The microspheres (ALD-HA-RG504H-MC70) were optimally prepared by introducing a viscous material (hyaluronic acid) and a co-solvent system in the inner aqueous and oil phases, respectively, and showed a significantly increased drug encapsulation efficacy (>70%); the initial burst release was <10% after 1 day. In vitro drug release from ALD-HA-RG504H-MC70 followed zero-order kinetics for approximately 4 weeks and the alendronate plasma level was maintained for more than 1 month after intramuscular injection in rabbits. The ovariectomized (OVX) rats with ALD-HA-RG504H-MC70 injected intramuscularly (0.9 mg alendronate/kg/4 weeks) had 112% and 482% increased bone mineral density and trabecular area in the tibia than the OVX controls, respectively, and showed significant improvements in trabecular microarchitecture and bone strength. Furthermore, the major biomarkers of bone turnover revealed that ALD-HA-RG504H-MC70 suppressed effectively the progression of osteoporosis and facilitated new bone formation. Therefore, this sustained release depot system may improve patient compliance and therapeutic efficacy by reducing dose amounts and frequency with minimal adverse reactions.

Local drug delivery for enhancing fracture healing in osteoporotic bone

Fragility fractures can cause significant morbidity and mortality in patients with osteoporosis and inflict a considerable medical and socioeconomic burden. Moreover, treatment of an osteoporotic fracture is challenging due to the decreased strength of the surrounding bone and suboptimal healing capacity, predisposing both to fixation failure and non-union. Whereas a systemic osteoporosis treatment acts slowly, local release of osteogenic agents in osteoporotic fracture would act rapidly to increase bone strength and quality, as well as to reduce the bone healing period and prevent development of a problematic non-union. The identification of agents with potential to stimulate bone formation and improve implant fixation strength in osteoporotic bone has raised hope for the fast augmentation of osteoporotic fractures. Stimulation of bone formation by local delivery of growth factors is an approach already in clinical use for the treatment of non-unions, and could be utilized for osteoporotic fractures as well. Small molecules have also gained ground as stable and inexpensive compounds to enhance bone formation and tackle osteoporosis. The aim of this paper is to present the state of the art on local drug delivery in osteoporotic fractures. Advantages, disadvantages and underlying molecular mechanisms of different active species for local bone healing in osteoporotic bone are discussed. This review also identifies promising new candidate molecules and innovative approaches for the local drug delivery in osteoporotic bone.