Note on the formulation of thermosensitive and mucoadhesive vaginal hydrogels containing the miniCD4 M48U1 as anti-HIV-1 microbicide

Development of Thermoresponsive Hydrogels with Mucoadhesion Properties Loaded with Metronidazole Gel-Flakes for Improved Bacterial Vaginosis Treatment

Bacterial vaginosis is an infectious disease that has significantly affected women's health. Metronidazole has been widely used as a drug for treating bacterial vaginosis. Nevertheless, the currently available therapies have been found to be inefficient and inconvenient. Here, we developed the combination approach of gel flake and thermoresponsive hydrogel systems. The gel flakes were prepared using gellan gum and chitosan, showing that the incorporation of metronidazole was able to provide a sustained release pattern for 24 h with an entrapment efficiency of >90%. Moreover, the gel flakes were incorporated into Pluronics-based thermoresponsive hydrogel using the combination of Pluronic F127 and F68. The hydrogels were found to exhibit the desired thermoresponsive properties, showing sol-gel transition at vaginal temperature. Following the addition of sodium alginate as a mucoadhesive agent, the hydrogel was retained in the vaginal tissue for more than 8 h, with more than 5 mg of metronidazole retained in the ex vivo evaluation. Finally, using the bacterial vaginosis infection model in rats, this approach could decrease the viability of Escherichia coli and Staphylococcus aureus with reduction percentages of more than 95% after 3 days of treatment, with the healing ability similar to normal vaginal tissue. In conclusion, this study offers an effective approach for the treatment of bacterial vaginosis.

Thermoresponsive mucoadhesive hybrid gels in advanced drug delivery systems

Thermoresponsive polymers have seen extensive use in the development of stimuli-responsive drug formulations for oral, buccal, nasal, ocular, topical, rectal, parenteral, and vaginal routes of administration. Despite their great potential, their use has been limited by various obstacles, such as undesirable high polymer concentration, wide gelation temperature, low gel strength, poor mucoadhesiveness, and short retention. Mucoadhesive polymers have been suggested to improve the mucoadhesive features of thermoresponsive gels, leading to increased drug bioavailability and efficacy. This article highlights the use of in-situ thermoresponsive mucoadhesive hydrogel blends or hybrids that have been developed and assessed in various routes of administration.

In vitro and ex vivo models for evaluating vaginal drug delivery systems

Vaginal drug delivery systems are often preferred for treating a variety of diseases and conditions of the female reproductive tract (FRT), as delivery can be more targeted with less systemic side effects. However, there are many anatomical and biological barriers to effective treatment via the vaginal route. Further, biocompatibility with the local tissue and microbial microenvironment is desired. A variety of in vitro and ex vivo models are described herein for evaluating the physicochemical properties and toxicity profile of vaginal drug delivery systems. Deciding whether to utilize organoids in vitro or fresh human cervicovaginal mucus ex vivo requires careful consideration of the intended use and the formulation characteristics. Optimally, in vitro and ex vivo experimentation will inform or predict in vivo performance, and examples are given that describe utilization of a range of methods from in vitro to in vivo. Lastly, we highlight more advanced model systems for other mucosa as inspiration for the future in model development for the FRT.

Development of thermosensitive and mucoadhesive gels of cabotegravir for enhanced permeation and retention profiles in vaginal tissue: A proof of concept study

As an effective anti-HIV drug, cabotegravir (CAB) is currently administered via oral and injection routes, leading to several drawbacks, such as poor oral bioavailability and problems in the injection application process, as well as low drug concentration in vaginal tissue of woman patients. To overcome these issues, for the first time, we formulated CAB into three types of vaginal gels, considering the benefits of vaginal tissue as a delivery route. Thermosensitive gel, mucoadhesive gel, and the combination of these gels were developed as suitable carriers for CAB. Pluronics®, hydroxy propyl methyl cellulose (HPMC), Carbomer and poly(ethylene glycol) (PEG) 400 were used as thermosensitive, mucoadhesive and permeation enhancer agents, respectively. The gels were evaluated for their thermosensitive and mucoadhesive properties, as well as their pH values, viscosities, gel erosions, drug content recovery, in vitro drug release, ex vivo permeation, ex vivo retention, hemolytic activities, Lactobacillus inhibition activities and in vivo irritation properties. The results showed that all formulations showed desired characteristics for vaginal administration. Importantly, all formulations did not show hemolytic activities and inhibitions to Lactobacillus as normal bacteria in the vagina. Furthermore, no irritation in the vaginal tissues of the rats was observed by histopathological studies. Considering the thermosensitive and mucoadhesive properties, the combination of Pluronic® F127, Pluronic F68, and HPMC in thermosensitive-mucoadhesive vaginal gels was selected as the optimum dosage form for CAB as this formulation was able to provide ease administration due to its liquid form at room temperature. The use of PEG in this formulation was able to increase the penetrability of CAB through vaginal tissue with 0.61 ± 0.05 mg and 17.28 ± 0.95 mg of CAB being able to penetrate and localize in the vagina, respectively. Essentially, the optimum formulation was retained in the vaginal mucosa for>8 h. To conclude, further extensive in vivo studies should now be conducted to evaluate the efficacy of this approach.

Women-specific routes of administration for drugs: A critical overview

The woman's body presents a number of unique anatomical features that can constitute valuable routes for the administration of drugs, either for local or systemic action. These are associated with genitalia (vaginal, endocervical, intrauterine, intrafallopian and intraovarian routes), changes occurring during pregnancy (extra-amniotic, intra-amniotic and intraplacental routes) and the female breast (breast intraductal route). While the vaginal administration of drug products is common, other routes have limited clinical application and are fairly unknown even for scientists involved in drug delivery science. Understanding the possibilities and limitations of women-specific routes is of key importance for the development of new preventative, diagnostic and therapeutic strategies that will ultimately contribute to the advancement of women's health. This article provides an overview on women-specific routes for the administration of drugs, focusing on aspects such as biological features pertaining to drug delivery, relevance in current clinical practice, available drug dosage forms/delivery systems and administration techniques, as well as recent trends in the field.

Recent Advances in Polymer-Based Vaginal Drug Delivery Systems

The vagina has been considered a potential drug administration route for centuries. Most of the currently marketed and investigated vaginal formulations are composed with the use of natural or synthetic polymers having different functions in the product. The vaginal route is usually investigated as an administration site for topically acting active ingredients; however, the anatomical and physiological features of the vagina make it suitable also for drug systemic absorption. In this review, the most important natural and synthetic polymers used in vaginal products are summarized and described, with special attention paid to the properties important in terms of vaginal application. Moreover, the current knowledge on the commonly applied and innovative dosage forms designed for vaginal administration was presented. The aim of this work was to highlight the most recent research directions and indicate challenges related to vaginal drug administrations. As revealed in the literature overview, intravaginal products still gain enormous scientific attention, and novel polymers and formulations are still explored. However, there are research areas that require more extensive studies in order to provide the safety of novel vaginal products.

Highlights in poloxamer-based drug delivery systems as strategy at local application for vaginal infections

Infectious diseases related to the vagina include diseases caused by the imbalance of the vaginal flora and by sexually transmitted infections. Some of these present themselves as a public health problem due to the lack of efficient treatment that leads to their complete cure, and others due to the growing resistance to drugs used in therapy. In this sense, new treatment strategies are desirable, with vaginal administration rout being a great choice since can bypass first-pass metabolism and decrease drug interactions and adverse effects. However, it is worth highlighting limitations related to patient's discomfort at application time. Thereby, the use of poloxamer-based drug delivery systems is desirable due its stimuli-sensitive characteristic. Therefore, the present review reports a brief overview of poloxamer properties, biological behavior and advances in poloxamer applications in controlled drug release systems for infectious diseases related to the vagina treatment and prevention.

Injectable Vaginal Hydrogels as a Multi-Drug Carrier for Contraception

Injectable intravaginal hydrogels could deliver drugs systemically without hepatic first pass effect. This paper focuses on the contraceptive function of an injectable temperature-sensitive four-arm star-shaped poly(D,L-lactic-co-glycolic acid)-b-methoxy poly(ethylene glycol) (4sPLGA-mPEG) block copolymer hydrogels as a carrier of three drugs. In vitro controlled release profiles were investigated via HPLC, and it showed that the cumulative release amounts of indomethacin (IMC), gestodene (GSD), and ethinyl estradiol (EE) from copolymer hydrogels could be regulated by adjusting the lactide/glycolide (LA/GA) mol ratio. In addition, in vitro release profiles of IMC, GSD, and EE well corresponded to Higuchi model. The acute toxicity of copolymer hydrogels loaded with different dosage contents multi-drug was evaluated in vivo. As to the high dosage group, the uterus was hydropic at day 1 and ulcerated at day 5, followed with intestinal adhesion. Regarding the middle dosage group, no festering of tissues was observed and, blood coagulum existed in the uterus at different days. For low dosage group, no significant tissue necrosis was found. Finally, the antifertility experiments confirmed that hydrogels loaded with the multi-drug had an excellent contraceptive effect. The above results indicated that injectable copolymer hydrogel as a multi-drug carrier was promising as a novel contraception method.

Pharmaceutical Vehicles for Vaginal and Rectal Administration of Anti-HIV Microbicide Nanosystems

Prevention strategies play a key role in the fight against HIV/AIDS. Vaginal and rectal microbicides hold great promise in tackling sexual transmission of HIV-1, but effective and safe products are yet to be approved and made available to those in need. While most efforts have been placed in finding and testing suitable active drug candidates to be used in microbicide development, the last decade also saw considerable advances in the design of adequate carrier systems and formulations that could lead to products presenting enhanced performance in protecting from infection. One strategy demonstrating great potential encompasses the use of nanosystems, either with intrinsic antiviral activity or acting as carriers for promising microbicide drug candidates. Polymeric nanoparticles, in particular, have been shown to be able to enhance mucosal distribution and retention of promising antiretroviral compounds. One important aspect in the development of nanotechnology-based microbicides relates to the design of pharmaceutical vehicles that allow not only convenient vaginal and/or rectal administration, but also preserve or even enhance the performance of nanosystems. In this manuscript, we revise relevant work concerning the selection of vaginal/rectal dosage forms and vehicle formulation development for the administration of microbicide nanosystems. We also pinpoint major gaps in the field and provide pertinent hints for future work.

Thermosensitive hydrogels a versatile concept adapted to vaginal drug delivery

Vaginal drug delivery represents an attractive strategy for local and systemic delivery of drugs otherwise poorly absorbed after oral administration. The rather dense vascular network, mucus permeability and the physiological phenomenon of the uterine first-pass effect can all be exploited for therapeutic benefit. However, several physiological factors such as an acidic pH, constant secretion, and turnover of mucus as well as varying thickness of the vaginal epithelium can impact sustained drug delivery. In recent years, polymers have been designed to tackle challenges mentioned above. In particular, thermosensitive hydrogels hold great promise due to their stability, biocompatibility, adhesion properties and adjustable drug release kinetics. Here, we discuss the physiological and anatomical uniqueness of the vaginal environment and how it impacts the safe and efficient vaginal delivery and also reviewed several thermosensitive hydrogels deemed suitable for vaginal drug delivery by addressing specific characteristics, which are essential to engage the vaginal environment successfully.

M48U1 and Tenofovir combination synergistically inhibits HIV infection in activated PBMCs and human cervicovaginal histocultures

Microbicides are considered a promising strategy for preventing human immunodeficiency virus (HIV-1) transmission and disease. In this report, we first analyzed the antiviral activity of the miniCD4 M48U1 peptide formulated in hydroxyethylcellulose (HEC) hydrogel in activated peripheral blood mononuclear cells (PBMCs) infected with R5- and X4–tropic HIV-1 strains. The results demonstrate that M48U1 prevented infection by several HIV-1 strains including laboratory strains, and HIV-1 subtype B and C strains isolated from the activated PBMCs of patients. M48U1 also inhibited infection by two HIV-1 transmitted/founder infectious molecular clones (pREJO.c/2864 and pTHRO.c/2626). In addition, M48U1 was administered in association with tenofovir, and these two antiretroviral drugs synergistically inhibited HIV-1 infection. In the next series of experiments, we tested M48U1 alone or in combination with tenofovir in HEC hydrogel with an organ-like structure mimicking human cervicovaginal tissue. We demonstrated a strong antiviral effect in absence of significant tissue toxicity. Together, these results indicate that co-treatment with M48U1 plus tenofovir is an effective antiviral strategy that may be used as a new topical microbicide to prevent HIV-1 transmission.

Studies and methodologies on vaginal drug permeation

The vagina stands as an important alternative to the oral route for those systemic drugs that are poorly absorbed orally or are rapidly metabolized by the liver. Drug permeation through the vaginal tissue can be estimated by using in vitro, ex vivo and in vivo models. The latter ones, although more realistic, assume ethical and biological limitations due to animal handling. Therefore, in vitro and ex vivo models have been developed to predict drug absorption through the vagina while allowing for simultaneous toxicity and pathogenesis studies. This review focuses on available methodologies to study vaginal drug permeation discussing their advantages and drawbacks. The technical complexity, costs and the ethical issues of an available model, along with its accuracy and reproducibility will determine if it is valid and applicable. Therefore every model shall be evaluated, validated and standardized in order to allow for extrapolations and results presumption, and so improving vaginal drug research and stressing its benefits.

Thermosensitive and mucoadhesive pluronic-hydroxypropylmethylcellulose hydrogel containing the mini-CD4 M48U1 is a promising efficient barrier against HIV diffusion through macaque cervicovaginal mucus

To be efficient, vaginal microbicide hydrogels should form a barrier against viral infections and prevent virus spreading through mucus. Multiple particle tracking was used to quantify the mobility of 170-nm fluorescently labeled COOH-modified polystyrene particles (COOH-PS) into thermosensitive hydrogels composed of amphiphilic triblock copolymers with block compositions EOn-POm-EOn (where EO refers to ethylene oxide and PO to propylene oxide) containing mucoadhesive hydroxypropylmethylcellulose (HPMC). COOH-PS were used to mimic the size and the surface charge of HIV-1. Analysis of COOH-PS trajectories showed that particle mobility was decreased by Pluronic hydrogels in comparison with cynomolgus macaque cervicovaginal mucus and hydroxyethylcellulose hydrogel (HEC; 1.5% by weight [wt%]) used as negative controls. Formulation of the peptide mini-CD4 M48U1 used as an anti-HIV-1 molecule into a mixture of Pluronic F127 (20 wt%) and HPMC (1 wt%) did not affect its anti-HIV-1 activity in comparison with HEC hydrogel. The 50% inhibitory concentration (IC50) was 0.53 μg/ml (0.17 μM) for M48U1-HEC and 0.58 μg/ml (0.19 μM) for M48U1-F127-HPMC. The present work suggests that hydrogels composed of F127-HPMC (20/1 wt%, respectively) can be used to create an efficient barrier against particle diffusion in comparison to conventional HEC hydrogels.