Development of novel solid dispersion of tranilast using amphiphilic block copolymer for improved oral bioavailability

Self-micellizing solid dispersion of thymoquinone with enhanced biopharmaceutical and nephroprotective effects

The present study was designed to develop a self-micellizing solid dispersion (SMSD) containing Thymoquinone (TQM), a phytonutrient obtained from Nigella sativa seeds, aiming to improve its biopharmaceutical and nephroprotective functions. The apparent solubility of TQM in polymer solutions was used to choose an appropriate amphiphilic polymer that could be used to make an SMSD system. Based on the apparent solubility, Soluplus® was selected as an appropriate carrier, and mixing with TQM, SMSD-TQM with different loadings of TQM (5-15%) was made by solvent evaporation and freeze-drying techniques, respectively, and the formulations were optimized. The optimized SMSD-TQM was evaluated in terms of particle size distribution, morphology, release characteristics, pharmacokinetic behavior, and nephroprotective effects in a rat model of acute kidney injury. SMSD-TQM significantly improved the dissolution characteristics (97.8%) of TQM in water within 60 min. Oral administration of SMSD-TQM in rats exhibited a 4.9-fold higher systemic exposure than crystalline TQM. In a cisplatin-induced (6 mg/kg, i.p.) acute kidney-damaged rat model, oral SMSD-TQM (10 mg/kg) improved the nephroprotective effects of TQM based on the results of kidney biomarkers and histological abnormalities. These findings suggest that SMSD-TQM might be efficacious in enhancing the nephroprotective effect of TQM by overcoming biopharmaceutical limitations.

Self-nanomicellizing solid dispersion: A promising platform for oral drug delivery

Amorphous solid dispersion (ASD) has been widely used to enhance the oral bioavailability of water-insoluble drugs for oral delivery because of its advantages of enhancing solubility and dissolution rate. However, the problems related to drug recrystallization after drug dissolution in media or body fluid have constrained its application. Recently, a self-nanomicellizing solid dispersion (SNMSD) has been developed by incorporating self-micellizing polymers as carriers to settle the problems, markedly improving the ability of supersaturation maintenance and enhancing the oral bioavailability of drug. Spontaneous formation and stability of the self-nanomicelle (SNM) have been proved to be the key to supersaturation maintenance of SNMSD system. This offers a novel research direction for maintaining supersaturation and enhancing the bioavailability of ASDs. To delve into the advantages of SNMSDs, we provide a concise review introducing the formation mechanism, characterization methods and stability of SNMs, emphasizing the advantages of SNMSDs for oral drug delivery facilitated by SNM formation, and discussing relevant research prospects.

Self-micellizing solid dispersion of tacrolimus: Physicochemical and pharmacokinetic characterization

The present study was undertaken to develop a self-micellizing solid dispersion (SMSD) of tacrolimus (TAC) to improve the biopharmaceutical properties of TAC. An SMSD formulation of TAC (SMSD/TAC) and amorphous solid dispersion formulation of TAC (ASD/TAC) were prepared with Soluplus® , an amphiphilic copolymer, and hydroxypropyl cellulose, respectively. Physicochemical properties were characterized in terms of morphology, crystallinity, storage stability, interaction of TAC with Soluplus® , and micelle-forming potency; pharmacokinetic behavior was also evaluated in rats. Tacrolimus in both formulations was in an amorphous state. After storage at 40°C/75% relativity humidity for 4 weeks, there were no significant changes in the crystallinity of TAC between nonaged and aged SMSD/TAC, whereas slight recrystallization was observed in aged ASD/TAC. The results of circular dichroism (CD) and infrared spectroscopic analyses were indicative of the potent drug-polymer interaction in SMSD/TAC, possibly leading to the prevention of recrystallization. Compared with other TAC samples, SMSD/TAC exhibited significant improvement in the dissolution behavior of TAC through the immediate formation of fine micelles. After the oral administration of TAC samples (10 mg TAC/kg) to rats, there was marked enhancement in systemic exposure to TAC with both formulations; in particular, SMSD/TAC achieved an increase in bioavailability ca. 20-fold higher than crystalline TAC. The SMSD approach might provide an effective dosage form for TAC with enhanced physicochemical stability and oral absorption.

Exploring the Application of Micellar Drug Delivery Systems in Cancer Nanomedicine

Various formulations of polymeric micelles, tiny spherical structures made of polymeric materials, are currently being investigated in preclinical and clinical settings for their potential as nanomedicines. They target specific tissues and prolong circulation in the body, making them promising cancer treatment options. This review focuses on the different types of polymeric materials available to synthesize micelles, as well as the different ways that micelles can be tailored to be responsive to different stimuli. The selection of stimuli-sensitive polymers used in micelle preparation is based on the specific conditions found in the tumor microenvironment. Additionally, clinical trends in using micelles to treat cancer are presented, including what happens to micelles after they are administered. Finally, various cancer drug delivery applications involving micelles are discussed along with their regulatory aspects and future outlooks. As part of this discussion, we will examine current research and development in this field. The challenges and barriers they may have to overcome before they can be widely adopted in clinics will also be discussed.

[Solubilization of Poorly Water-soluble Drugs with Amphiphilic Phospholipid Polymers]

Most drug candidates developed in recent years are poorly water-soluble, which is a key challenge in pharmaceutical science. Various solubilization methods have been investigated thus far, most of which require solubilizers that provide a local hydrophobic environment wherein a drug can dissolve or induce interactions with drug molecules. We have focused on amphiphilic 2-methacryloyloxyethyl phosphoryl choline (MPC) polymers. In addition to the ease of molecular design of amphiphilic MPC polymers owing to their chemical structures, they have been reported to possess high biocompatibility in various biomaterial applications. Additionally, amphiphilic MPC polymers have been applied in the pharmaceutical field, especially in solubilization. We have qualitatively and quantitatively evaluated the effects of the chemical structure and physical properties of the solubilizer on the MPC polymers. In particular, MPC polymers with different chemical structures were designed and synthesized. The inner polarity and molecular mobility in the polymer aggregates were evaluated, indicating that the intrinsic properties reflect the chemical structure of the polymer. Additionally, amphiphilic MPC polymers were used to improve the solubility of poorly water-soluble drugs and as solid dispersion carriers, and they exhibited superior solubilizing abilities compared to a commonly used polymer. Furthermore, the solubility of biopharmaceuticals, such as peptides, was improved. It is possible to design and synthesize optimal structures based on the polarity of the hydrophobic environment and the intermolecular interaction with a drug. This research provides a unified interpretation of drugs and efficiently summarizes knowledge about drug development, which will facilitate the efficient and rapid development of drug formulations.

Nano-sized Solid Dispersions for Improving the Bioavailability of Poorly Water-soluble Drugs

It has been well established that solid dispersions have a high potential to increase the release rate of poorly water-soluble drugs, resulting in high drug bioavailability. Solid dispersions have been vigorously investigated with various practical approaches in recent decades. Improvements in wettability, molecular interactions and drugs being held in an amorphous state in solid dispersions are the main mechanisms underlying the high drug release rate. Moreover, the synergistic effect of incorporating nanotechnology in solid dispersions is expected to lead to an advanced drug delivery system for poorly water-soluble drugs. However, to date, there is still a lack of reviews providing outlooks on the nano-sized solid dispersions that have been substantially investigated for improving the bioavailability of poorly water-soluble drugs. In the current review, we aim to overview key advantages and approaches for producing nano-sized solid dispersions. The classification of key strategies in developing nano-sized solid dispersions will advance the creation of even more efficient solid dispersions, which will translate into clinical studies.

Pharmaceutical nanoparticle isolation using CO2-assisted dynamic bed coating

Poor solubility of new chemical entities (NCEs) is a major bottleneck in the pharmaceutical industry which typically leads to poor drug bioavailability and efficacy. Nanotechnologies offer an interesting route to improve the apparent solubility and dissolution rate of pharmaceutical drugs, and processes such as nano-spray drying and supercritical CO₂-assisted spray drying (SASD) provide a route to engineer and produce solid drug nanoparticles. However, dried nanoparticles often show poor rheological properties (e.g. flowability, tabletability) and their isolation using these methods is typically inefficient and leads to poor collection yields. The work presented herein demonstrates a novel production and isolation method for drug nanoparticles using a 'top spray dynamic bed coating' process, which uses CO₂ spray as the fluidizing gas. Nanoparticles of three BCS class II Active Pharmaceutical Ingredients (APIs), namely carbamazepine (CBZ), ketoprofen (KET) and risperidone (RIS), were produced and successfully coated onto micron-sized microcrystalline cellulose (MCC) particles. The size distribution of the API nanoparticles was in the range of 90-490 nm. The stable forms of CBZ (form III), KET (form I), and the metastable form of RIS (form B) were produced and coated onto MCC carrier microparticles. All the isolated solids presented optimal rheological properties along with a 2-6 fold improvement in the dissolution rate of the corresponding APIs. Hence, the 'top spray dynamic bed coater' developed in this work demonstrates to be an efficient approach to produce and coat API nanoparticles onto carrier particles with optimal rheological properties and improved dissolution.

Aggregated Solution Morphology of Poly(acrylic acid)-Poly(styrene) Block Copolymers Improves Drug Supersaturation Maintenance and Caco-2 Cell Membrane Permeation

Amorphous solid dispersions of polymers and drugs have been shown to improve supersaturation maintenance of poorly water-soluble drugs. Herein, amorphous spray-dried dispersions (SDDs) of poly(acrylic acid)-polystyrene (PS-b-PAA) diblock copolymers with differing degrees of polymerization were prepared in aggregated and nonaggregated states with the Biopharmaceutical Classification System Class II drug, probucol (PBC). Specifically, PS₉₀-b-PAA₁₅, PS₉₀-b-PAA₈₀, PS₃₈-b-PAA₂₂₀, and PS₃₈-b-PAA₃₂₀ amphiphilic block polymers that covered a compositional range in the area of oral drug delivery were prepared to examine the role of molecular weight and controlled aggregation in promoting drug supersaturation and maintenance. In addition, hydrophilic homopolymers PAA₂₀, PAA₉₆, PAA₂₂₆, and PAA₃₉₂ were prepared as controls to evaluate the role of the block copolymer-based SDDs in PBC solubilization. Characterization such as powder X-ray diffraction, scanning electron microscopy, and dissolution tests under nonsink conditions were then performed to evaluate the SDDs. When comparing the block copolymer systems, polymers that were preaggregated into micellular structures prior to spray drying with the drug promoted higher drug solubility and maintenance than when the drug was formulated with molecularly dissolved PS-PAA block polymer. Interestingly, the aggregated PS₉₀-b-PAA₈₀ SDD with 25 wt % PBC achieved 100% burst release and maintained full supersaturation of PBC at pH 6.5 (physiological pH in the small intestine). Dissolution studies conducted at the pH of the stomach (pH = 1.2) show that a minimal amount of drug (∼10 μg/mL) was released, which could be used for protecting drugs from acidic environments (stomach) before reaching the small intestine. To evaluate drug bioavailability, in vitro Caco-2 cell assays were performed, which reveal that PAA-based excipients do not hinder drug permeation across the epithelial membrane and that PS₉₀-b-PAA₈₀ SDD with 25 wt % PBC achieved the highest membrane permeability coefficient. This work demonstrates that block copolymer-based SDDs capable of preaggregating into nanostructures may be a tunable drug-delivery platform that can improve solubility and supersaturation maintenance of Class II pharmaceutics while also not prohibiting bioavailability through model intestinal membranes. Indeed, this concept may be extended to accommodate a myriad of pharmaceutical and excipient structures.

Amphiphilic Copolymer of Polyhedral Oligomeric Silsesquioxane (POSS) Methacrylate for Solid Dispersion of Paclitaxel

Suitable polymers for the homogeneous formulation of drug/polymer mixtures should be selected to correct the structural and physicochemical nature with a rapid dissolution rate. This study aimed to evaluate a copolymer prepared by the radical polymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC) and a polyhedral oligomeric silsesquioxane (POSS) methacrylate bearing an ethyl (C₂H₅) group (MPC-ran-C₂H₅-POSS) as a carrier for the solid formulation of paclitaxel (PTX). A single-phase homogeneous formulation of PTX with the mixture of the MPC-ran-C₂H₅-POSS and polyvinylpyrrolidone (PVP) was prepared by a solvent method. The formulation of MPC-ran-C₂H₅-POSS/PVP/PTX enhanced the dissolution rate and the dissolved amount (approximately 90% within 40 min) without precipitation. The X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC) analysis confirmed the presence of PTX as an amorphous state. The amphiphilic nature of the MPC-ran-C₂H₅-POSS contributed to enhancing the aqueous solubility of PTX. The new formulation is applicable for solid dispersion technique via the supersaturation of PTX in an aqueous media.

Enhanced biopharmaceutical effects of tranilast on experimental colitis model with use of self-micellizing solid dispersion technology

The present study aimed to clarify the applicability of a self-micellizing solid dispersion of tranilast (SMSD/TL) to the treatment of inflammatory bowel diseases (IBD) using an experimental colitis model. SMSD/TL with several loading amounts ranging from 10 to 50% was prepared using a wet-milling system. The physicochemical properties of SMSD/TL were evaluated in terms of the dissolution behavior, morphology, and particle size distribution. Animal studies were conducted to evaluate oral bioavailability in rats and anti-inflammatory effects in a rat model of chemically induced colitis. SMSD/TL with drug loading of 15% (SMSD/TL15) showed enhanced dissolution behavior at pH 1.2, compared with other tested other formulations. After the dispersion of SMSD/TL15 in deionized water, fine micelles formed with an average diameter of 137 nm. SMSD/TL15 (10 mg-TL/kg) exhibited about 147- and 34-fold greater value for C_max and the area under the curve of plasma concentration vs. time than crystalline TL, respectively. Although the anti-inflammatory effect on the colitis model was very limited in the crystalline TL (2 mg/kg) group, inflammatory events, such as myeloperoxidase activity and thickening of the submucosa in colon tissues, were significantly suppressed in the SMSD/TL15 (2 mg-TL/kg) group. Based on these findings, SMSD/TL might be a more efficacious dosage option for improved IBD treatment.

Nanomedicines: current status and future perspectives in aspect of drug delivery and pharmacokinetics

Nanomedicines have evolved into various forms including dendrimers, nanocrystals, emulsions, liposomes, solid lipid nanoparticles, micelles, and polymeric nanoparticles since their first launch in the market. Widely highlighted benefits of nanomedicines over conventional medicines include superior efficacy, safety, physicochemical properties, and pharmacokinetic/pharmacodynamic profiles of pharmaceutical ingredients. Especially, various kinetic characteristics of nanomedicines in body are further influenced by their formulations. This review provides an updated understanding of nanomedicines with respect to delivery and pharmacokinetics. It describes the process and advantages of the nanomedicines approved by FDA and EMA. New FDA and EMA guidelines will also be discussed. Based on the analysis of recent guidelines and approved nanomedicines, key issues in the future development of nanomedicines will be addressed.

The efficiency and mechanism of N-octyl-O, N-carboxymethyl chitosan-based micelles to enhance the oral absorption of silybin

This study demonstrates the preparation of a silybin-loaded N-octyl-O, N-carboxymethyl chitosan micelle (OCC-SLB) to enhance the oral absorption efficiency of silybin (SLB) and investigate the related mechanisms of enhancement. Firstly, the physicochemical properties of OCC and OCC-SLB micelles, including critical micelle concentration (CMC), particle size, zeta potential, drug-loading, etc., were determined. Results of pharmacokinetic studies on rats then confirmed a desirable enhancement in the oral bioavailability of SLB by OCC-SLB micelles compared with a stock SLB suspension solution. Subsequently, uptake studies on the Caco-2 cell line demonstrated that OCC-SLB micelles effectively accumulated SLB or rhodamine-123 into cells through clathrin and caveolae-mediated endocytosis and the inhibition of P-glycoprotein (P-gp) efflux. In addition, results of the Caco-2 transport study further clarified that OCC-SLB micelles enhanced the permeability of SLB via tight junction opening and clathrin-mediated transcytosis across the endothelium. These findings indicated the OCC micelle platform as a potential delivery vehicle for oral administration of P-gp substrates such as SLB.

Determination of tranilast in bio-samples by LC-MS/MS: Application to a pharmacokinetic and brain tissue distribution study in rats

As a potent drug used to improve the neurodegenerative conditions, there is few information about the brain tissue distribution of tranilast by now. In this study, a novel sensitive LC-MS/MS method has been developed and validated to determine tranilast in rat brain tissue samples. The calibration curve showed good linearity ranged from 2.140 to 428.0ng·mL^-1. The method was fully validated and successfully applied in the brain tissue distribution study of tranilast in rats, which had never been reported in detail by now. Furthermore, a rapid LC-MS/MS method with a short run time of 3min was developed and validated for the determination of tranilast in rat plasma and the application to a pharmacokinetic study of tranilast in rats. After oral dosage of 10.5mg·kg^-1 tranilast, the maximum plasma concentration (C_max¹) of tranilast was (18.59±5.40) μg·mL^-1 at (0.667±0.408) h while the area under the curve (AUC_0-24) was (54.87±14.13) μg·h·mL^-1 with the elimination half-life of (2.93±0.41) h. The ratio calculated by dividing the concentration of tranilast in brain with the concentration of tranilast in the plasma, was (0.6042%±0.0572%), (0.7484%±0.0883%), (0.5914%±0.0416%) and (0.3830%±0.1632%) at 0.167, 0.5, 2 and 8h, respectively. The results showed that tranilast with fast absorption could penetrate the rat brain blood barrier after oral gavage. The obtained data also showed that tranilast could be quickly distributed and eliminated in brain tissue.

Characterization, Molecular Docking, and In Vitro Dissolution Studies of Solid Dispersions of 20(S)-Protopanaxadiol

In this study, we prepared solid dispersions (SDs) of 20(S)-protopanaxadiol (PPD) using a melting-solvent method with different polymers, in order to improve the solubility and dissolution performance of drugs with poor water solubility. The SDs were characterized via differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), and molecular docking and dynamics study. DSC and PXRD results indicated that PPD crystallinity in SDs was significantly reduced, and that the majority of PPD is amorphous. No interaction was observed between PPD and polymers on FTIR and NMR spectra. Molecular docking and dynamic calculations indicated that the PPD molecule localized to the interpolated charged surface, rather than within the amorphous polymer chain network, which might help prevent PPD crystallization, consequently enhancing the PPD dispersion in polymers. An in vitro dissolution study revealed that the SDs considerably improved the PPD dissolution performance in distilled water containing 0.35% Tween-80 (T-80). Furthermore, among three PPD-SDs formulations, Poloxamer188 (F68) was the most effective in improving the PPD solubility and was even superior to the mixed polymers. Therefore, the SD prepared with F68 as a hydrophilic polymer carrier might be a promising strategy for improving solubility and in vitro dissolution performance. F68-based SD, containing PPD with a melting-solvent preparation method, can be used as a promising, nontoxic, quick-release, and effective intermediate for other pharmaceutical formulations, in order to achieve a more effective drug delivery.

Cytocompatible and multifunctional polymeric nanoparticles for transportation of bioactive molecules into and within cells

Multifunctional polymeric nanoparticles are materials with great potential for a wide range of biomedical applications. For progression in this area of research, unfavorable interactions of these nanoparticles with proteins and cells must be avoided in biological environments, for example, through treatment of the nanoparticle surfaces. Construction of an artificial cell membrane structure based on polymers bearing the zwitterionic phosphorylcholine group can prevent biological reactions at the surface effectively. In addition, certain bioactive molecules can be immobilized on the surface of the polymer to generate enough affinity to capture target biomolecules. Furthermore, entrapment of inorganic nanoparticles inside polymeric matrices enhances the nanoparticle functionality significantly. This review summarizes the preparation and characterization of cytocompatible and multifunctional polymeric nanoparticles; it analyzes the efficiency of their fluorescence function, the nature of the artificial cell membrane structure, and their performance as in-cell devices; and finally, it evaluates both their chemical reactivity and effects in cells.

Preparation and in vitro/in vivo characterization of tranilast-AMP clay complex for improving drug dissolution and bioavailability

The present study aimed to develop an effective oral formulation of tranilast (TL), a poorly soluble anti-inflammatory drug, via the formation of drug complex with 3-aminopropyl functionalized magnesium phyllosilicate (AMP clay) and improve the pH-dependent drug dissolution and bioavailability of TL. The drug-clay complex (TL-AMP complex) was prepared by co-precipitation method and its structural properties were characterized by X-ray powder diffraction, Fourier transform infrared spectroscopy and transmission electron microscopy. The dissolution profiles of TL-AMP complex were evaluated at different pHs. The formation of TL-AMP complex significantly improved the dissolution rate as well as the extent of drug release at acidic pHs, while the dissolution of untreated TL was negligible at pH 1.2 and 4.0. TL-AMP complex also achieved faster drug release than untreated drug (about 90 vs 30 % within 30 min) at pH 6.8. After oral administration to rats, TL-AMP complex enhanced significantly (p < 0.05) oral drug exposure and increased Cmax and AUC by six- and threefolds, respectively, compared to untreated TL. In conclusion, TL-AMP complex may be promising to improve the pH-dependent dissolution as well as bioavailability of TL.

Nanodrugs: pharmacokinetics and safety

To date, various nanodrug systems have been developed for different routes of administration, which include dendrimers, nanocrystals, emulsions, liposomes, solid lipid nanoparticles, micelles, and polymeric nanoparticles. Nanodrug systems have been employed to improve the efficacy, safety, physicochemical properties, and pharmacokinetic/pharmacodynamic profile of pharmaceutical substances. In particular, functionalized nanodrug systems can offer enhanced bioavailability of orally taken drugs, prolonged half-life of injected drugs (by reducing immunogenicity), and targeted delivery to specific tissues. Thus, nanodrug systems might lower the frequency of administration while providing maximized pharmacological effects and minimized systemic side effects, possibly leading to better therapeutic compliance and clinical outcomes. In spite of these attractive pharmacokinetic advantages, recent attention has been drawn to the toxic potential of nanodrugs since they often exhibit in vitro and in vivo cytotoxicity, oxidative stress, inflammation, and genotoxicity. A better understanding of the pharmacokinetic and safety characteristics of nanodrugs and the limitations of each delivery option is necessary for the further development of efficacious nanodrugs with high therapeutic potential and a wide safety margin. This review highlights the recent progress in nanodrug system development, with a focus on the pharmacokinetic advantages and safety challenges.