Preparation and characterization of sustained-release rotigotine film-forming gel

Translation from Preclinical Research to Clinical Trials: Transdermal Drug Delivery for Neurodegenerative and Mental Disorders

Neurodegenerative diseases (NDs), particularly dementia, provide significant problems to worldwide healthcare systems. The development of therapeutic materials for various diseases has a severe challenge in the form of the blood-brain barrier (BBB). Transdermal treatment has recently garnered widespread favor as an alternative method of delivering active chemicals to the brain. This approach has several advantages, including low invasiveness, self-administration, avoidance of first-pass metabolism, preservation of steady plasma concentrations, regulated release, safety, efficacy, and better patient compliance. Topics include the transdermal method for therapeutic NDs, their classification, and the mechanisms that allow the medicine to enter the bloodstream through the skin. The paper also discusses the obstacles and potential outcomes of transdermal therapy, emphasizing the benefits and drawbacks of different approaches.

Design and Evaluation of Glimepiride Hydrogel for Transdermal Delivery

The solubility of glimepiride (GM) was improved from 1.6 μg/mL to 22.0 mg/mL when GM and meglumine (MU) complexes were prepared. Therefore, transdermal hydrogels of GM Carbopol (GM-CP) and GM hydroxypropyl methylcellulose pullulan (GM-HPMC-Pu) were prepared successfully utilizing the improved drug solubility by GM-MU. Based on single factor experiment and response surface methodology, two kinds of hydrogel formulations were optimized by drug release studies in vitro. The optimized GM-CP hydrogel was composed of GM, the mixture of azone and oleic acid (1:1, 2.6%, v/v) and carbopol 940 (1%, w/v). The GM-HPMC-Pu hydrogel was developed using GM, HPMC (3.5%, w/v), Pu (1.5%, w/v), glycerol (5%, v/v), azone (2.9%, v/v) and oleic acid (2.6%, v/v). The study of hydrogels in vivo was performed using rabbits. The results indicated that the drug could sustain release from GM-CP or GM-HPMC-Pu hydrogel and maintain the high plasma concentration for 48 h. Compared with commercial GM tablet, the relative bioavailability of GM-CP and GM-HPMC-Pu hydrogel reached up 48% and 133%, respectively. Moreover, the drug release in vitro could well predict its absorption in vivo. There was a good correlation (R² ≥0.966) in GM hydrogel between the drug release in vitro and transdermal absorption in vivo. Therefore, a novel GM hydrogel dosage form may be considered to design.

Benefits and limitations of nanomedicine treatment of brain cancers and age-dependent neurodegenerative disorders

The treatment of central nervous system (CNS) malignancies, including brain cancers, is limited by a number of obstructions, including the blood-brain barrier (BBB), the heterogeneity and high invasiveness of tumors, the inaccessibility of tissues for early diagnosis and effective surgery, and anti-cancer drug resistance. Therapies employing nanomedicine have been shown to facilitate drug penetration across the BBB and maintain biodistribution and accumulation of therapeutic agents at the desired target site. The application of lipid-, polymer-, or metal-based nanocarriers represents an advanced drug delivery system for a growing group of anti-cancer chemicals. The nanocarrier surface is designed to contain an active ligand (cancer cell marker or antibody)-binding structure which can be modified to target specific cancer cells. Glioblastoma, ependymoma, neuroblastoma, medulloblastoma, and primary CNS lymphomas were recently targeted by easily absorbed nanocarriers. The metal- (such as transferrin drug-loaded systems), polymer- (nanocapsules and nanospheres), or lipid- (such as sulfatide-containing nanoliposomes)-based nano-vehicles were loaded with apoptosis- and/or ferroptosis-stimulating agents and demonstrated promising anti-cancer effects. This review aims to discuss effective nanomedicine approaches designed to overcome the current limitations in the therapy of brain cancers and age-dependent neurodegenerative disorders. To accent current obstacles for successful CNS-based cancer therapy, we discuss nanomedicine perspectives and limitations of nanodrug use associated with the specificity of nervous tissue characteristics and the effects nanocarriers have on cognition.

Rotigotine: A Review of Analytical Methods for the Raw Material, Pharmaceutical Formulations, and Its Impurities

BACKGROUND

Rotigotine is a dopaminergic agonist developed for the treatment of Parkinson's disease and restless leg syndrome. The pure levorotatory enantiomer is marketed in several countries as a transdermal patch. Reports of oxidation and instability in a previous formulation indicate the need to evaluate impurities in both the raw material and pharmaceutical dosage forms of rotigotine to ensure product quality.

OBJECTIVE

This review examines the main analytical methods for analyzing rotigotine in raw material and its transdermal patches with the aim of assisting the development of new pharmaceutical formulations and stability studies.

METHODS

Analytical methods based on high-performance liquid chromatography for rotigotine from pharmacopoeias and literature were evaluated. A comparison was made between the methods found in the literature and official rotigotine monographs described by the United States, European, and British Pharmacopoeias, including a discussion of their acceptance limits for impurities related to the drug. The different impurities from the synthesis processes and degradation studies of rotigotine were also evaluated, as well as the main articles that describe methods for assessing their chiral purity.

RESULTS

Qualified and unofficial official impurities found in forced degradation studies were verified. The methods presented show adequate specificity and selectivity in determining the drug in the presence of its impurities.

CONCLUSIONS

The approached methods are promising, but more detailed studies on the stability of rotigotine are still lacking, mainly in the pharmacokinetic and toxicological characterization of its impurities.

Nose to brain delivery of rotigotine loaded chitosan nanoparticles in human SH-SY5Y neuroblastoma cells and animal model of Parkinson's disease

Rotigotine, a non-ergoline dopamine agonist, has been shown to be highly effective for the treatment of Parkinson's disease (PD). However, despite its therapeutic potential, its' clinical applications were hindered due to low aqueous solubility, first-pass metabolism and low bioavailability. Therefore, we developed rotigotine-loaded chitosan nanoparticles (RNPs) for nose-to-brain delivery and evaluated its neuronal uptake, antioxidant and neuroprotective effects using cell-based studies. The pharmacological effects of nose-to-brain delivery of the RNPs were also evaluated in an animal model of PD. The average particle size, particle size distribution and entrapment efficiency of the RNPs were found to be satisfactory. Exposure of RNPs for 24 h did not show any cytotoxicity towards SH-SY5Y human neuroblastoma cells. Furthermore, the RNPs caused a decrease in alpha-synuclein (SNCA) and an increase in tyrosine hydroxylase (TH) expression in these cells, suggestion that the exposure alleviated some of the direct neurotoxic effects of 6-OHDA. Behavioral and biochemical testing of RNPs in haloperidol-induced PD rats showed a reversal of catalepsy, akinesia and restoration of swimming ability. A decrease in lactate dehydrogenase (LDH) and an increase in catalase activities were also observed in the brain tissues. The results from the animal model of PD show that intranasally-administered RNPs enhanced brain targeting efficiency and drug bioavailability. Thus, RNPs for nose-to-brain delivery has significant potential to be developed as a treatment approach for PD.

Design and optimization of film-forming gel of etoricoxib using research surface methodology

The present investigation is focused on the development of transdermal film-forming gel (FFG) loaded with etoricoxib employing research surface methodology (RSM). Box-Behnken surface design method was used to develop experimental run using different concentrations of etoricoxib, hydroxypropyl methylcellulose (HPMC K100M), and eudragit RL100 as independent variables, and Derringer's optimization tool was employed to optimize best possible formulation. The dependent variables considered in this study were viscosity and drug permeation at 24 h (Q24, μg/cm²). Anti-inflammatory study was performed on Wistar albino rats for 8 h. Skin irritation studies and accelerated stability studies were performed for validated FFG formulations. Quadratic model was found to be best fit model (p < 0.0001) for both the responses. The influence of HPMC concentration on the viscosity was found to be highest whereas concentration of etoricoxib was maximum for Q24. The optimum composition of the FFG was observed to be 4% of etoricoxib, 1.1246% of HPMC, and 0.4% of eudragit. Above composition resulted in viscosity of 1549.5 mPa.s and maximum Q24 of 4639.11 μg/cm² with desirability 0.918. The in vivo anti-inflammatory study demonstrated better sustained release effect (for 8 h) of optimized FFG compared to orally administered drug suspension. An average irritation score of 0.555 was observed on Draize scoring system. The validated FFG formulation was found to be stable for the 3 months in accelerated conditions. It can be concluded from the above investigations that the validated FFG formulation of etoricoxib is well tolerated and could provide sustained drug release for 8 h. Graphical abstract.

Controlled Release Film Forming Systems in Drug Delivery: The Potential for Efficient Drug Delivery

Despite many available approaches for transdermal drug delivery, patient compliance and drug targeting at the desired concentration are still concerns for effective therapies. Precise and efficient film-forming systems provide great potential for controlling drug delivery through the skin with the combined advantages of films and hydrogels. The associated disadvantages of both systems (films and hydrogels) will be overcome in film-forming systems. Different strategies have been designed to control drug release through the skin, including changes to film-forming polymers, plasticizers, additives or even model drugs in formulations. In the current review, we aim to discuss the recent advances in film-forming systems to provide the principles and review the methods of these systems as applied to controlled drug release. Advances in the design of film-forming systems open a new generation of these systems.

Medicated Foams and Film Forming Dosage Forms as Tools to Improve the Thermodynamic Activity of Drugs to be Administered Through the Skin

Medicated foams and film forming systems are dosage forms formulated to undergo a con-trolled metamorphosis when applied on the skin. Indeed, due to the presence of propellant or a particular air-spray foam pump, a liquid can generate foam when applied on the stratum corneum, or a liquid or conventional dosage form can form on the skin a continuous film as a consequence of the solvent evapora-tion. Thanks to these controlled modifications, the drug thermodynamic activity increases favoring the skin penetration and, therefore, the bioavailability with respect to conventional semi-solid and liquid dosage forms. Furthermore, the available clinical data also evidence that these dosage forms improve the patient’s compliance. The main formulative aspects of medicated foams and film forming systems are reviewed with the aim to underline the possible advantages in terms of biopharmaceutical performances and pa-tient’s adherence.

Fabrication, Optimization, and Evaluation of Rotigotine-Loaded Chitosan Nanoparticles for Nose-To-Brain Delivery

The objective of the present study was to develop, optimize, and evaluate rotigotine-loaded chitosan nanoparticles (RNPs) for nose-to-brain delivery. Rotigotine-loaded chitosan nanoparticles were prepared by the ionic gelation method and optimized for various parameters such as the effect of chitosan, sodium tripolyphosphate, rotigotine concentration on particle size, polydispersity index (PDI), zeta potential, and entrapment efficiency. The prepared nanoparticles were characterized using photon correlation spectroscopy, transmission electron microscopy, scanning electron microscopy, atomic force microscopy, fourier-transform infrared spectroscopy, and X-ray diffraction. The developed RNPs showed a small hydrodynamic particle size (75.37 ± 3.37 nm), small PDI (0.368 ± 0.02), satisfactory zeta potential (25.53 ± 0.45 mV), and very high entrapment efficiency (96.08 ± 0.01). The 24-h in vitro release and ex vivo nasal permeation of rotigotine from the nanoparticles were 49.45 ± 2.09% and 92.15 ± 4.74% while rotigotine solution showed corresponding values of 95.96 ± 1.79%and 58.22 ± 1.75%, respectively. The overall improvement ratio for flux and permeability coefficient were found to be 4.88 and 2.67 when compared with rotigotine solution. A histopathological study showed that the nanoparticulate formulation produced no toxicity or structural damage to nasal mucosa. Our results indicated that rotigotine-loaded chitosan nanoparticles provide an efficient carrier for nose-to-brain delivery.

Formulation and in vitro/in vivo evaluation of chitosan-based film forming gel containing ketoprofen

The film forming gel, adhered to skin surfaces upon application and formed a film, has an advantage onto skin to provide protection and continuous drug release to the application site. This study aimed to prepare a chitosan-based film forming gel containing ketoprofen (CbFG) and to evaluate the CbFG and film from CbFG (CbFG-film). CbFG were prepared with chitosan, lactic acid and various skin permeation enhancers. The physicochemical characteristics were evaluated by texture analysis, viscometry, SEM, DSC, XRD and FT-IR. To identify the mechanism of skin permeation, in vitro skin permeation study was conducted with a Franz diffusion cell and excised SD-rat and hairless mouse dorsal skin. In vivo efficacy assessment in mono-iodoacetate (MIA)-induced rheumatoid arthritis animal model was also conducted. CbFG was successfully prepared and, after applying CbFG to the excised rat dorsal skin, the CbFG-film was also formed well. The physicochemical characteristics of CbFG and CbFG-film could be explained by the grafting of oleic acid onto chitosan in the absence of catalysts. In addition, CbFG containing oleic acid had a higher skin permeation rate in comparison with any other candidate enhancers. The in vivo efficacy study also confirmed significant anti-inflammatory and analgesic effects. Consequently, we report the successful preparation of chitosan-based film forming gel containing ketoprofen with excellent mechanical properties, skin permeation and anti-inflammatory and analgesic effects.

Film forming systems for topical and transdermal drug delivery

Skin is considered as an important route of administration of drugs for both local and systemic effects. The effectiveness of topical therapy depends on the physicochemical properties of the drug and adherence of the patient to the treatment regimen as well as the system's ability to adhere to skin during the therapy so as to promote drug penetration through the skin barrier. Conventional formulations for topical and dermatological administration of drugs have certain limitations like poor adherence to skin, poor permeability and compromised patient compliance. For the treatment of diseases of body tissues and wounds, the drug has to be maintained at the site of treatment for an effective period of time. Topical film forming systems are such developing drug delivery systems meant for topical application to the skin, which adhere to the body, forming a thin transparent film and provide delivery of the active ingredients to the body tissue. These are intended for skin application as emollient or protective and for local action or transdermal penetration of medicament for systemic action. The transparency is an appreciable feature of this polymeric system which greatly influences the patient acceptance. In the current discussion, the film forming systems are described as a promising choice for topical and transdermal drug delivery. Further the various types of film forming systems (sprays/solutions, gels and emulsions) along with their evaluation parameters have also been reviewed.

Transdermal delivery of Diltiazem HCl from matrix film: Effect of penetration enhancers and study of antihypertensive activity in rabbit model

The present investigation focused on the development of Diltiazem HCl (DTH) matrix film and its characterization by in-vitro, ex-vivo and in-vivo methods. Films were prepared by solvent casting method by taking different ratios of hydroxypropyl methylcellulose K4M (HPMC K4M) and Eudragit RS100. Various parameters of the films were analyzed such as mechanical property using tensile tester, interaction study by Fourier transform infrared spectroscopy (FTIR) and Thermogravimetric analysis (TGA), in-vitro drug release through cellulose acetate membrane, ex-vivo permeation study using abdominal skin of rat employing Franz diffusion cell, and in-vivo antihypertensive activity using rabbit model. The FTIR studies confirmed the absence of interaction between DTH and selected polymers. Thermal analysis showed the shifting of endothermic peak of DTH in film, indicating the dispersion of DTH in molecular form throughout the film. Incorporation of 1,8-cineole showed highest flux (89.7 μg/cm(2)/h) of DTH compared to other penetration enhancers such as capsaicin, dimethyl sulfoxide (DMSO), and N-methyl pyrrolidone (NMP). Photomicrographs of histology study on optimized formulation (DF9) illustrated disruption of stratum corneum (SC) supporting the ex-vivo results. The in-vivo antihypertensive activity results demonstrated that formulation DF9 was effective in reducing arterial blood pressure in normotensive rabbits. SEM analysis of films kept for stability study (40 ± 2 °C/75% ± 5%RH for 3 months) revealed the formation of drug crystals which may be due to higher temperature. The findings of the study provide a better alternative dosage form of DTH for the effective treatment of hypertension with enhanced patient compliance.

Wound healing efficacy of a chitosan-based film-forming gel containing tyrothricin in various rat wound models

The objective of this study was to evaluate the healing effects of a chitosan-based, film-forming gel containing tyrothricin (TYR) in various rat wound models, including burn, abrasion, incision, and excision models. After solidification, the chitosan film layer successfully covered and protected a variety of wounds. Wound size was measured at predetermined timepoints after wound induction, and the effects of the film-forming gel were compared with negative (no treatment) and positive control groups (commercially available sodium fusidate ointment and TYR gel). In burn, abrasion and excision wound models, the film-forming gel enabled significantly better healing from 1 to 6 days after wound induction, compared with the negative control. Importantly, the film-forming gel also enabled significantly better healing compared with the positive control treatments. In the incision wound model, the breaking strength of wound strips from the group treated with the film-forming gel was significantly increased compared with both the negative and positive control groups. Histological studies revealed advanced granulation tissue formation and epithelialization in wounds treated with the film-forming gel. We hypothesize that the superior healing effects of the film-forming gel are due to wound occlusion, conferred by the chitosan film. Our data suggest that this film-forming gel may be useful in treating various wounds, including burn, abrasion, incision and excision wounds.

Rotigotine: the first new chemical entity for transdermal drug delivery

Rotigotine is the first, and to date, the only new chemical entity to be formulated for transdermal delivery. Although first approved for the management of Parkinson's disease in Europe in 2007 and Restless Leg Syndrome in 2008, the story of rotigotine began more than twenty years earlier. In this review we outline the historical development of this molecule and its route to licensed medicine status. It has very favourable physicochemical properties for transdermal delivery but it took a significant period to develop from concept to market. The stability problems which led to the temporary withdrawal of the patch are examined and the major clinical studies demonstrating efficacy and safety are outlined. Alternative new therapeutic modalities are also considered.