An injectable liquid crystal system for sustained delivery of entecavir

Sustain-release lipid-liquid crystal formulations of pexiganan against Helicobacter pylori infection: in vitro evaluation in C57BL/6 mice

INTRODUCTION

The Gram-negative bacterium Helicobacter pylori, H. pylori, is associated with significant digestive disorders. However, the effectiveness of bacterial eradication is declining due to drug resistance. A potent anti-H. pylori activity is shown by the natural antimicrobial peptide pexiganan.

OBJECTIVE

The current study aimed to evaluate the effectiveness of pexiganan and its lipid-liquid crystals (LLCs) in inducing Helicobacter pylori in mice.

METHODS

In this experimental study, H. pylori infection was first induced in C57BL/6 mice. Secondly, the antibacterial efficacy of pexiganan and its LLCs formulations was investigated to eliminate H. pylori infection.

RESULTS

The H. pylori infection could not be completely eradicated by pexiganan peptide alone. However, incorporating pexiganan within the LLC formulation resulted in an increased elimination of H. pylori. Under the H&E strain, the pexiganan-LLCs formulation revealed minimal mucosal alterations and a lower amount of inflammatory cell infiltration in the stomach compared to the placebo.

CONCLUSION

Clarithromycin was more effective than pexiganan at all tested concentrations. Furthermore, the pexiganan-loaded LLCs exhibited superior efficacy in curing H. pylori infection in a mouse model compared to pexiganan alone. This formulation can enhance H. pylori clearance while mitigating the adverse effects, typically associated with conventional drugs, leading to a viable alternative to current treatment options.

Prolonged local delivery of doxorubicin to cancer cells using lipid liquid crystalline system

Exploring efficient strategies to eradicate the tumor tissue and enhance patient outcomes still remained a serious challenge. Systemic toxicity of the current chemotherapeutics and their low concentration in the tumor site limited reaching a practical approach in their administration and combinational therapy. Besides, complicated delivery platforms could not receive the marketing approval due to difficulties in scale up procedures. To this aim, we developed a simple injectable local delivery platform which provided a sufficient dose of the chemotherapeutic in the cancerous tissue with sustained release properties. Herein, various injectable in situ forming LLC formulations loaded with doxorubicin (DOX) were developed. Although there were many previous studies on lipid liquid crystal (LLC) based formulations, their performance as an injectable intratumoral depot system for local chemotherapy has not been extensively investigated yet. In the current study we developed 18 formulations of DOX loaded LLCs using Box-Behnken method via different ratios of phosphatidyl choline: sorbitan monooleate (PC: SMO), N-Methyl-2-pyrrolidone (NMP), and tween 80. The physicochemical properties of the formulations were investigated and their in vivo tumor inhibition efficiencies in C26 tumor bearing mouse model was further studied. The results indicated that DOX loaded PC: SMO/NMP/Tween 80 (50:50/50/2 w/w%) and DOX loaded PC: SMO/NMP (50:50/50 w/w%) formulations were syringeable with pseudoplastic behavior. Also, they could release the cargo in a sustained manner for 60 days. Compared to intravascular administration of DOX, intratumoral injection of the developed formulations led to a significant decrease in tumor volume and enhancement of the survival rate in murine tumor model. Additionally, animal imaging studies proved their prolonged accumulation in the tumor site. Histopathological studies showed that treatment with the DOX-loaded LLC formulations did not cause any systemic toxicity to vital organs. Taken together, we believe that the developed simple and efficient local delivery platform can be further used in combinational therapies and treatment of various solid tumors.

An intelligent phase transformation system based on lyotropic liquid crystals for sequential biomolecule delivery to enhance bone regeneration

Endogenous repair of critical bone defects is typically hampered by inadequate vascularization in the early stages and insufficient bone regeneration later on. Therefore, drug delivery systems with the ability to couple angiogenesis and osteogenesis in a spatiotemporal manner are highly desirable for vascularized bone formation. Herein, we devoted to develop a liquid crystal formulation system (LCFS) attaining a controlled temporal release of angiogenic and osteoinductive bioactive molecules that could orchestrate the coupling of angiogenesis and osteogenesis in an optimal way. It has been demonstrated that the release kinetics of biomolecules depend on the hydrophobicity of the loaded molecules, making the delivery profile programmable and controllable. The hydrophilic deferoxamine (DFO) could be released rapidly within 5 days to activate angiogenic signaling, while the lipophilic simvastatin (SIM) showed a slow and sustained release for continuous osteogenic induction. Apart from its good biocompatibility with mesenchymal stem cells derived from rat bone marrow (rBMSCs), the DFO/SIM loaded LCFS could stimulate the formation of a vascular morphology in human umbilical vein endothelial cells (HUVECs) and the osteogenic differentiation of rBMSCs in vitro. The in vivo rat femoral defect models have witnessed the prominent angiogenic and osteogenic effects induced by the sequential presentation of DFO and SIM. This study suggests that the sequential release of DFO and SIM from the LCFS results in enhanced bone formation, offering a facile and viable treatment option for bone defects by mimicking the physiological process of bone regeneration.

HIV nucleoside reverse transcriptase inhibitors

More than 40 years into the pandemic, HIV remains a global burden and as of now, there is no cure in sight. Fortunately, highly active antiretroviral therapy (HAART) has been developed to manage and suppress HIV infection. Combinations of two to three drugs targeting key viral proteins, including compounds inhibiting HIV reverse transcriptase (RT), have become the cornerstone of HIV treatment. This review discusses nucleoside reverse transcriptase inhibitors (NRTIs), including chain terminators, delayed chain terminators, nucleoside reverse transcriptase translocation inhibitors (NRTTIs), and nucleotide competing RT inhibitors (NcRTIs); focusing on their history, mechanism of action, resistance, and current clinical application, including long-acting regimens.

Hyaluronic acid-entecavir conjugates-core/lipid-shell nanohybrids for efficient macrophage uptake and hepatotropic prospects

Drug covalently bound to polymers had formed, lately, platforms with great promise in drug delivery. These drug polymer conjugates (DPC) boosted drug loading and controlled medicine release with targeting ability. Herein, the ability of entecavir (E) conjugated to hyaluronic acid (HA) forming the core of vitamin E coated lipid nanohybrids (EE-HA LPH), to target Kupffer cells and hepatocyte had been proved. The drug was associated to HA with efficiency of 93.48 ± 3.14 % and nanohybrids loading of 22.02 ± 2.3 %. DiI labelled lipidic nanohybrids improved the macrophage uptake in J774 cells with a 21 day hepatocytes retention post intramuscular injection. Finally, in vivo biocompatibility and safety with respect to body weight, organs indices and histopathological alterations were demonstrated. Coating with vitamin E and conjugation of E to HA (a CD44 ligand), could give grounds for prospective application for vectored nano-platform in hepatitis B.

Lipid-liquid crystals for 2 months controlled risperidone release: In-vitro evaluation and pharmacokinetics in rabbits

In this study, a drug delivery system based on lipid liquid crystal (LLC) was developed for the long-term delivery of risperidone to improve psychological treatment. Optimal LLC formulation was achieved based on maximum release after 60 days with different ratios of phosphatidylcholine (PC) to sorbitol monooleate (PC: SMO), tween grade 80 (w/w %), and tocopherol acetate (TA) (w/w %) using the Box-Behnken method. In vitro and ex vivo studies, pharmacokinetics, and histopathological examination in rabbits were conducted to compare the optimal LLC with Risperdal CONSTA®. The optimum formulation containing the PC to SMO ratio of 58.6%, tween 0.82% w/w, and TA 3.6% w/w was selected because it had the highest drug release percentage (100%) during about two months. Polarized optical microscopy (POM) revealed H_II mesophase with a 2-dimensional structure. Cell culture also revealed moderate cytotoxicity for LLC-risperidone. Pharmacokinetic data displayed that the optimal LLC created a more consistent drug serum level within 60 days, and histopathology results demonstrated slight to moderate damage in rabbits' organs. Furthermore, the accelerated stability test confirmed optimum stability for LLC and risperidone. This study confirmed the better pharmacokinetic potentials of SMO-based LLC systems compared with Risperdal CONSTA®, which would promote patient compliance and obviate the difficulties of additional oral therapy.

Lyotropic Liquid Crystalline Nanostructures as Drug Delivery Systems and Vaccine Platforms

Lyotropic liquid crystals result from the self-assembly process of amphiphilic molecules, such as lipids, into water, being organized in different mesophases. The non-lamellar formed mesophases, such as bicontinuous cubic (cubosomes) and inverse hexagonal (hexosomes), attract great scientific interest in the field of pharmaceutical nanotechnology. In the present review, an overview of the engineering and characterization of non-lamellar lyotropic liquid crystalline nanosystems (LLCN) is provided, focusing on their advantages as drug delivery nanocarriers and innovative vaccine platforms. It is described that non-lamellar LLCN can be utilized as drug delivery nanosystems, as well as for protein, peptide, and nucleic acid delivery. They exhibit major advantages, including stimuli-responsive properties for the “on demand” drug release delivery and the ability for controlled release by manipulating their internal conformation properties and their administration by different routes. Moreover, non-lamellar LLCN exhibit unique adjuvant properties to activate the immune system, being ideal for the development of novel vaccines. This review outlines the recent advances in lipid-based liquid crystalline technology and highlights the unique features of such systems, with a hopeful scope to contribute to the rational design of future nanosystems.

An Injectable In Situ Depot-Forming Lipidic Lyotropic Liquid Crystal System for Localized Intratumoral Drug Delivery

To address the need for localized chemotherapy against unresectable solid tumors, an injectable in situ depot-forming lipidic lyotropic liquid crystal system (L3CS) is explored that can provide spatiotemporal control over drug delivery. Although liquid crystals have been studied extensively before but their application as an injectable intratumoral depot system for locoregional chemotherapy has not been explored yet. The developed L3CS in the present study is a low-viscosity injectable fluid having a lamellar phase, which transforms into a hexagonal mesophase depot system on subcutaneous or intratumoral injection. The transformed depot system can be preprogrammed to provide tailored drug release intratumorally, over a period of one week to one month. To establish the efficacy of the developed L3CS, doxorubicin is used as a model drug. The drug release mechanism is studied in detail both in vitro and in vivo, and the efficacy of the developed system is investigated in the murine 4T1 tumor model. The direct intratumoral injection of the L3CS provided localized delivery of doxorubicin inside the tumor and restricted its access within the tumor only for a sustained period of time. This led to an over 10-fold reduction in tumor burden, reduced cardiotoxicity, and a significant increase in the median survival rate, compared to the control group. The developed L3CS thus provides an efficient strategy for localized chemotherapy against unresectable solid tumors with a great degree of spatial and temporal control over drug delivery.

Comparison of lipid liquid crystal formulation and Vivitrol® for sustained release of Naltrexone: In vitro evaluation and pharmacokinetics in rats

Camurus' FluidCrystal® injection depot is a lipid liquid crystal (LLC) phase formation-based method, comprising of glycerol dioleate (GDO) and soy phosphatidylcholine (SPC), together with minute quantities of N-methyl-2-pyrrolidone solvent (NMP). The present study aimed to develop a method for LLC using sorbitan monooleate (LLC-SMO) instead of GDO to prepare a one-month sustained-release formulation of naltrexone (NTX) that is applied for the treatment of autism and treating alcohol dependence. The optical characteristics of the LLC were assessed by polarizing light microscopy (PLM) to reveal the presence of lamellar, hexagonal, and cubic mesophases. Furthermore, in vitro release of NTX and NMP, degradation, pharmacokinetics, and histopathology of LLC-GDO and LLC-SMO in rats were evaluated and compared to those of Vivitrol®. The PLM images revealed that the structure of LLC-SMO is hexagonal, similar to LLC-GDO. The in vitro release of NTX and its pharmacokinetic results in rats indicted that the LLC-SMO system is more uniform than LLC-GDO and Vivitrol® during 35 days. Histopathological results of LLC-GDO and LLC-SMO confirmed the biocompatibility of our LLC delivery systems. Taken together these data demonstrate that the LLC-SMO-based method, was efficient enough to sustain the release of NTX in vitro and in vivo, confirming the biocompatible nature of this delivery system.

A Lipid-Based Depot Formulation with a Novel Non-lamellar Liquid Crystal Forming Lipid

PURPOSE

Non-lamellar liquid crystal (NLLC)-forming lipids have gained attention as a novel component because of their ability to self-assemble upon contact with body fluids. In this study, a novel NLLC-forming lipid, mono-O-(5, 9, 13-trimethyl-4-tetradecenyl) glycerol ester (C17MGE), and a model drug with a middle molecule weight, leuprolide acetate (LA), were used to confirm the usefulness of C17MGE as an excipient for depot formulations with sustained release properties.

METHODS

A self-constructed depot formulation was prepared by mixing C17MGE and different types of phospholipids. The constructed NLLC structure was evaluated using small angle X-ray analysis and cryo-transmission electron microscopy. In vitro release and blood concentration profiles of LA were investigated.

RESULTS

The NLLC structure was confirmed by small angle X-ray analysis. LA release was able to be modified by adding different ratios of various phospholipids to C17MGE. Formulations containing 1, 2-dioleoyl-sn-glycero-3-phosphoglycerol sodium salt with a mixing ratio of 12% or 24% (MDOPG12 or MDOPG24, respectively) exhibited sustained release profiles of LA. In addition, the blood concentration of LA was detected over 21 days or more after administration of MDOPG12, and the absolute bioavailability was calculated to be about 100%.

CONCLUSIONS

A depot formulation using C17MGE was useful to achieve sustained release of LA.

Hexosomes as Efficient Platforms for Possible Fluoxetine Hydrochloride Repurposing with Improved Cytotoxicity against HepG2 Cells

The aim of this study was to investigate the feasibility of hexosomes (HEXs) as competent platforms for fluoxetine hydrochloride (FH) repurposing against HepG2 hepatocellular carcinoma. Different FH-loaded HEX formulations were prepared and optimized by the hot emulsification method. The HEX features such as particle size, ζ potential, and drug entrapment efficiency (EE%) can be tailored by tuning HEX components and fabrication conditions. The composition of the optimized FH hexosome (OFH-HEX) was composed of 3.1, 1.4, 0.5, 0.2, and 94.8% for glyceryl monooleate, oleic acid, pluronic F127, FH, and deionized water, respectively. The anionic OFH-HEX with a particle size of 145.5 ± 2.5 nm and drug EE% of 45.4 ± 1.2% was able to prolong the in vitro FH release, where only 19.5 ± 2.3% released in phosphate-buffered saline (PBS) pH 7.4 after 24 h. Contrarily, HEX rapidly released FH in acetate buffer pH 5.5 and achieved a 90.5 ± 4.7% release after 24 h. The obtained HEX showed an improved cellular internalization in a time-dependent manner and enhanced the cytotoxicity (2-fold higher than FH solution). The current study suggests the potential of FH-HEX as a possible anticancer agent against hepatocellular carcinoma.

An integrated vitamin E-coated polymer hybrid nanoplatform: A lucrative option for an enhanced in vitro macrophage retention for an anti-hepatitis B therapeutic prospect

A platform capable of specifically delivering an antiviral drug to the liver infected with hepatitis B is a major concern in hepatology. Vaccination has had a major effect on decreasing the emerging numbers of new cases of infection. However, the total elimination of the hepatitis B virus from the body requires prolonged therapy. In this work, we aimed to target the liver macrophages with lipid polymer hybrid nanoparticles (LPH), combining the merit of polymeric nanoparticles and lipid vesicles. The hydrophilic antiviral drug, entecavir (E), loaded LPH nanoparticles were optimized and physicochemically characterized. A modulated lipidic corona, as well as, an additional coat with vitamin E were used to extend the drug release enhance the macrophage uptake. The selected vitamin E coated LPH nanoparticles enriched with lecithin-glyceryl monostearate lipid shell exhibited high entrapment for E (80.47%), a size ≤ 200 nm for liver passive targeting, extended release over one week, proven serum stability, retained stability after refrigeration storage for 6 months. Upon macrophage uptake in vitro assessment, the presented formulation displayed promising traits, enhancing the cellular retention in J774 macrophages cells. In vivo and antiviral activity futuristic studies would help in the potential application of the ELPH in hepatitis B control.

Thermoresponsive gating membranes embedded with liquid crystal(s) for pulsatile transdermal drug delivery: An overview and perspectives

Due to the circadian rhythm regulation of almost every biological process in the human body, physiological and biochemical conditions vary considerably over the course of a 24-h period. Thus, optimal drug delivery and therapy should be effectively controlled to achieve the desired therapeutic plasma concentrations and therapeutic drug responses at the required time according to chronopharmacological concepts, rather than continuous maintenance of constant drug concentrations for an extended time period. For many drugs, it is not always necessary to constantly deliver a drug into the human body under disease conditions due to rhythmic variations. Pulsatile drug delivery systems (PDDSs) have been receiving more attention in pharmaceutical development by providing a predetermined lag period, followed by a fast or rate-controlled drug release after application. PDDSs are characterized by a programmed drug release, which may release a drug at repeatable pulses to match the biological and clinical needs of a given disease therapy. This review article focuses on thermoresponsive gating membranes embedded with liquid crystals (LCs) for transdermal drug delivery using PDDS technology. In addition, the principal rationale and the advanced approaches for the use of PDDSs, the marketed products of chronotherapeutic DDSs with pulsatile function designed by various PDDS technologies, pulsatile drug delivery designed with thermoresponsive polymers, challenges and opportunities of transdermal drug delivery, and novel approaches of LC systems for drug delivery are reviewed and discussed. A brief overview of all academic research articles concerning single LC- or binary LC-embedded thermoresponsive membranes with a switchable on-off permeation function through topical application by an external temperature control, which may modulate the dosing interval and administration time according to the therapeutic needs of the human body, is also compiled and presented. In the near future, since thermal-based approaches have become a well-accepted method to enhance transdermal delivery of different water-soluble drugs and macromolecules, a combination of the thermal-assisted approach with thermoresponsive LCs membranes will have the potential to improve PDDS applications but still poses a great challenge.

Exploration of long-acting implant formulations of hepatitis B drug entecavir

Alternative formulations of entecavir, a once daily oral hepatitis B antiretroviral, may improve treatment adherence by patients. We explored the use of biocompatible polymers to control entecavir dissolution in two formats suitable for subcutaneous implantation. Hot melt extrudates were prepared by extruding entecavir-polymer blends at specified weight ratios. Dip-coated tablets were prepared by compressing entecavir in a multi-tip tooling. Tablets were dip-coated in solutions of polymer and dried. In rodents, entecavir-poly(caprolactone) extrudates demonstrated >180 days of continuous drug release, although below the estimated efficacious target input rate. Drug pharmacokinetic profiles were tunable by varying the polymer employed and implant format. The rank order trends of drug input rates observed in vitro were observed in vivo in the detected plasma concentrations of entecavir. In all dose groups entecavir was not tolerated locally at the site of administration where adverse event severity correlated with drug input rate. These polymer-based implantable formats have applicability to long-acting formulations of high solubility compounds beyond entecavir.

Entecavir-loaded poly (lactic-co-glycolic acid) microspheres for long-term therapy of chronic hepatitis-B: Preparation and in vitro and in vivo evaluation

To avoid severe exacerbations in the load of hepatitis B virus (HBV) as a consequence of discontinuous use of anti-HBV drugs, entecavir (ETV), the first-line anti-HBV drug, was primally formulated as extended-release poly (lactic-co-glycolic acid) microspheres in the present study. Because ETV is slightly soluble in water and in some other organic solvents used for microsphere preparation, methods for solid-microencapsulation were employed to fabricate the ETV microspheres. The optimized microspheres were evaluated for their morphology, particle size, drug loading, in vitro drug release, and in vivo pharmacokinetics in rats. The optimized formulation was found to have a mean particle size of 86 µm and drug loading of 13%. Differential scanning calorimetry and powder X-ray diffraction indicated that ETV existed in crystal, amorphous, and molecular states in the microspheres. In vitro and in vivo release revealed that the dissolution of ETV dominated the release process. The morphology of the microspheres and changes in the morphology during in vitro release were assessed by scanning electron microscopy. The novel ETV-MS described in this study should have great potential for clinical use as an alternative treatment against HBV.

Construction of ultrasonic nanobubbles carrying CAIX polypeptides to target carcinoma cells derived from various organs

Background

Ultrasound molecular imaging is a novel diagnostic approach for tumors, whose key link is the construction of targeted ultrasound contrast agents. However, available targeted ultrasound contrast agents for molecular imaging of tumors are only achieving imaging in blood pool or one type tumor. No targeted ultrasound contrast agents have realized targeted ultrasound molecular imaging of tumor parenchymal cells in a variety of solid tumors so far. Carbonic anhydrase IX (CAIX) is highly expressed on cell membranes of various malignant solid tumors, so it’s a good target for ultrasound molecular imaging. Here, targeted nanobubbles carrying CAIX polypeptides for targeted binding to a variety of malignant tumors were constructed, and targeted binding ability and ultrasound imaging effect in different types of tumors were evaluated.

Results

The mean diameter of lipid targeted nanobubbles was (503.7 ± 78.47) nm, and the polypeptides evenly distributed on the surfaces of targeted nanobubbles, which possessed the advantages of homogenous particle size, high stability, and good safety. Targeted nanobubbles could gather around CAIX-positive cells (786-O and Hela cells), while they cannot gather around CAIX-negative cells (BxPC-3 cells) in vitro, and the affinity of targeted nanobubbles to CAIX-positive cells were significantly higher than that to CAIX-negative cells (P < 0.05). Peak intensity and duration time of targeted nanobubbles and blank nanobubbles were different in CAIX-positive transplanted tumor tissues in vivo (P < 0.05). Moreover, targeted nanobubbles in CAIX-positive transplanted tumor tissues produced higher peak intensity and longer duration time than those in CAIX-negative transplanted tumor tissues (P < 0.05). Finally, immunofluorescence not only confirmed targeted nanobubbles could pass through blood vessels to enter in tumor tissue spaces, but also clarified imaging differences of targeted nanobubbles in different types of transplanted tumor tissues.

Conclusions

Targeted nanobubbles carrying CAIX polypeptides can specifically enhance ultrasound imaging in CAIX-positive transplanted tumor tissues and could potentially be used in early diagnosis of a variety of solid tumors derived from various organs.

Electronic supplementary material

The online version of this article (doi:10.1186/s12951-017-0307-0) contains supplementary material, which is available to authorized users.

The in vivo transformation and pharmacokinetic properties of a liquid crystalline drug delivery system

A liquid crystalline (LC) system, composed of phosphatidylcholine, sorbitan monoleate, and tocopherol acetate, was investigated to understand the in vivo transformation after subcutaneous injection, coupled with the physicochemical and pharmacokinetic properties of the formulation. The rat model was utilized to monitor a pseudo-time course transformation from a precursor LC formulation to the LC matrix, coupled with the blood concentration profiles of the formulations containing leuprolide acetate. Three formulations that result in the H_II phase, demonstrating dissimilar in vitro release profiles, were used. The formulation showing the highest AUC, C_max and T_max, also displayed the greatest release rate in vitro, the lowest viscosity (LC matrix), and an earlier transformation (LC precursor to matrix) in vivo. A potential link between viscosity, phase transformation, and drug release properties of a liquid crystalline system is described.

Exploring the Phase Behavior of Monoolein/Oleic Acid/Water Systems for Enhanced Donezepil Administration for Alzheimer Disease Treatment

Donepezil is a drug usually administered by oral route for Alzheimer disease treatment, but several gastric side effects have been reported as diarrhea, nausea, and anorexia. We explored the phase behavior of lyotropic liquid crystalline (LLC) mesophases composed by monoolein/oleic acid/water for enhanced administration of donepezil. Polarized light microscopy suggested that these systems ranged from isotropic inverse micellar solutions (L2) to viscous and birefringent reverse hexagonal (HII) mesophases according to the amount of water in the ternary systems. Phase transition was observed from a L2 phase to HII mesophase after swelling studies, an interesting property to be explored as a precursor of LLC mesophases for mucosal administration that increases its viscosity in situ. Mucoadhesive properties of LLC mesophases were characterized using a texture analyzer indicating that these systems can have an increased residence time in the site of absorption. Donepezil-free base was incorporated in the evaluated formulations, and their in vitro release was controlled up to 24 h. The phase behavior of the systems demonstrated a great potential for enhanced donepezil administration once these mucoadhesive-controlled release formulations can incorporate the drug and prolong its release, possibly reducing its side effects.