Elucidating the guest-host interactions and complex formation of praziquantel and cyclodextrin derivatives by 13 C and 15 N solid-state NMR spectroscopy

Cyclodextrin Metal-Organic Frameworks as a Drug Delivery System for Selected Active Pharmaceutical Ingredients

The cyclodextrin-based metal-organic frameworks (CD MOFs) are a suitable molecular platform for drug delivery systems of various active pharmaceutical ingredients (APIs). The low toxicity and cost-efficient synthesis make CD MOFs an attractive host for the encapsulation of APIs. In this study, we created a model system based on γCD-K MOFs with widely used drugs carmofur (HCFU), 5-fluorouracil (5-FU), and salicylic acid (HBA) to study host-guest encapsulation methods using different crystallization protocols. The host-guest complexes of API:CD MOF in an in-depth study were investigated by liquid chromatography-mass spectrometry (LC-MS), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and 19F- and 13C-detected solid-state NMR spectroscopy (ssNMR). These techniques confirmed the structure and interaction sites within the encapsulation product in the host-guest complex. We also evaluated the toxicity and biocompatibility of the API:CD MOF complex using in vitro and in vivo methods. The cytotoxicity, hepatotoxicity, and neurotoxicity were established with cell lines of fibroblasts (BJ), human liver cell line (HepG2), and human oligodendrocytic cells (MO3.13). Then, Danio rerio was used as an in vivo experimental model of ecotoxicity. The results showed the choice of γCD-K-5 as the most protective and safe option for drug encapsulation to decrease its toxicity level against normal cells.

Praziquantel Fifty Years on: A Comprehensive Overview of Its Solid State

This review discusses the entire progress made on the anthelmintic drug praziquantel, focusing on the solid state and, therefore, on anhydrous crystalline polymorphs, amorphous forms, and multicomponent systems (i.e., hydrates, solvates, and cocrystals). Despite having been extensively studied over the last 50 years, new polymorphs and the greater part of their cocrystals have only been identified in the past decade. Progress in crystal engineering science (e.g., the use of mechanochemistry as a solid form screening tool and more strategic structure-based methods), along with the development of analytical techniques, including Synchrotron X-ray analyses, spectroscopy, and microscopy, have furthered the identification of unknown crystal structures of the drug. Also, computational modeling has significantly contributed to the prediction and design of new cocrystals by considering structural conformations and interactions energy. Whilst the insights on praziquantel polymorphs discussed in the present review will give a significant contribution to controlling their formation during manufacturing and drug formulation, the detailed multicomponent forms will help in designing and implementing future praziquantel-based functional materials. The latter will hopefully overcome praziquantel's numerous drawbacks and exploit its potential in the field of neglected tropical diseases.

A Review of Applications of Solid-State Nuclear Magnetic Resonance (ssNMR) for the Analysis of Cyclodextrin-Including Systems

Cyclodextrins, cyclic oligosaccharides composed of five or more α-D-glucopyranoside units linked by α-1,4 glycosidic bonds, are widely used both in their native forms as well as the components of more sophisticated materials. Over the last 30 years, solid-state nuclear magnetic resonance (ssNMR) has been used to characterize cyclodextrins (CDs) and CD-including systems, such as host-guest complexes or even more sophisticated macromolecules. In this review, the examples of such studies have been gathered and discussed. Due to the variety of possible ssNMR experiments, the most common approaches have been presented to provide the overview of the strategies employed to characterize those useful materials.

Nanoconfinement of a Pharmaceutical Cocrystal with Praziquantel in Mesoporous Silica: The Influence of the Solid Form on Dissolution Enhancement

Nanoconfinement is a recent strategy to enhance solubility and dissolution of active pharmaceutical ingredients (APIs) with poor biopharmaceutical properties. In this work, we combine the advantage of cocrystals of racemic praziquantel (PZQ) containing a water-soluble coformer (i.e., increased solubility and supersaturation) and its confinement in a mesoporous silica material (i.e., increased dissolution rate). Among various potential cocrystalline phases of PZQ with dicarboxylic acid coformers, the cocrystal with glutaric acid (PZQ-GLU) was selected and successfully loaded by the melting method into nanopores of SBA-15 (experimental pore size of 5.6 nm) as suggested by physical and spectroscopic characterization using various complementary techniques like N₂ adsorption, powder X-ray diffraction (PXRD), infrared spectroscopy (IR), solid-state NMR (ss-NMR), differential scanning calorimetry (DSC), and field emission-scanning electron microscopy (FE-SEM) analysis. The PZQ-GLU phase confined in SBA-15 presents more mobility according to ss-NMR studies but still retains its cocrystal-like features in the IR spectra, and it also shows depression of the melting transition temperature in DSC. On the contrary, pristine PZQ loaded into SBA-15 was found only in the amorphous state, according to the aforementioned studies. This dissimilar behavior of the composites was attributed to the larger crystal lattice of PZQ over the PZQ-GLU cocrystal (3320.1 vs 1167.9 ų) and to stronger intermolecular interactions between PZQ and GLU, facilitating the confinement of a more mobile solid-like phase in the constrained channels. Powder dissolution studies under extremely nonsink conditions (SI = 0.014) of the confined PZQ-GLU and amorphous PZQ phases embedded in mesoporous silica showed transient supersaturation behavior when dissolving in simulated gastric fluid (HCl pH 1.2 at 37 ± 0.5 °C) in a similar fashion to the bare cocrystal PZQ-GLU. A comparison of the area under the curve (AUC_0-90 min) of the dissolution profiles afforded a dissolution advantage of 2-fold (p < 0.05) of the new solid phases over pristine racemic PZQ after 90 min; under these conditions, the solubilized API reprecipitated as the recently discovered PZQ hemihydrate (PZQ-HH). In the presence of a cellulosic polymer, sustained solubilization of PZQ from composites SBA-15/PZQ or SBA-15/PZQ-GLU was observed, increasing AUC_0-90 min up to 5.1-fold in comparison to pristine PZQ. The combination of a confined solid phase in mesoporous silica and a methylcellulose polymer in the dissolution medium effectively maintained the drug solubilized during times significant to promote absorption. Finally, powder dissolution studies under intermediate nonsink conditions (SI = 1.99) showed a fast release profile from the nanoconfined PZQ-GLU phase in SBA-15, which reached rapid saturation (95% drug dissolved at 30 min); the amorphous PZQ composite and bare PZQ-GLU also displayed an immediate release of the API but at a lower rate (69% drug dissolved at 30 min). In all of these cases, a large dissolution advantage was observed from any of the novel solid phases over PZQ.

Investigation of Praziquantel/Cyclodextrin Inclusion Complexation by NMR and LC-HRMS/MS: Mechanism, Solubility, Chemical Stability, and Degradation Products

Praziquantel (PZQ) is a biopharmaceutical classification system (BCS) class II anthelmintic drug characterized by poor solubility and a bitter taste, both of which can be addressed by inclusion complexation with cyclodextrins (CD). In this work, a comprehensive investigation of praziquantel/cyclodextrin (PZQ/CD) complexes was conducted by means of UV-vis spectroscopy, spectrofluorimetry, NMR spectroscopy, liquid chromatography-high-resolution mass spectrometry (LC-HRMS/MS), and molecular modeling. Phase solubility studies revealed that among four CDs tested, the randomly methylated β-CD (RMβCD) and the sulfobutylether sodium salt β-CD (SBEβCD) resulted in the highest increase in PZQ solubility (approximately 16-fold). The formation of 1:1 inclusion complexes was confirmed by HRMS, NMR, and molecular modeling. Both cyclohexane and the central pyrazino ring, as well as an aromatic part of PZQ are included in the CD central cavity through several different binding modes, which exist simultaneously. Furthermore, the influence of CDs on PZQ stability was investigated in solution (HCl, NaOH, H₂O₂) and in the solid state (accelerated degradation, photostability) by ultra-high-performance liquid chromatography-diode array detection-tandem mass spectrometry (UPLC-DAD/MS). CD complexation promoted new degradation pathways of the drug. In addition to three already known PZQ degradants, seven new degradation products were identified (m/z 148, 215, 217, 301, 327, 343, and 378) and their structures were proposed based on HRMS/MS data. Solid complexes were prepared by mechanochemical activation, a solvent-free and ecologically acceptable method.

Effect of mechanochemical inclusion of triamterene into sulfobutylether-β-cyclodextrin and its improved dissolution behavior

The formation of inclusion complexes between triamterene (TT) and cyclodextrins (CDs) to increase the water apparent solubility of TT was investigated. UV data showed that the binding constant of the TT/sulfobutylether-β-cyclodextrin (SBE-β-CD) inclusion complex was 510 L/mol. The phenyl ring of TT was inserted into the secondary hydroxy face of SBE-β-CD, as demonstrated by ¹H-¹H rotating frame nuclear Overhauser effect spectroscopy NMR. Physicochemical properties of solid TT/SBE-β-CD complexes prepared by physical mixing, kneading, freeze-drying, and mechanochemical methods were studied by X-ray diffraction and ¹³C cross-polarization and magic angle spinning NMR. With the mechanochemical method, the diffraction peak corresponding to TT disappeared, indicating the formation of an inclusion complex. The results of the dissolution test revealed that the solid complex obtained by the mechanochemical method improved the dissolution of TT. The water apparent solubility of TT can be improved by simple mechanical mixing without organic solvents, and improved bioavailability after oral administration is expected.

Physicochemical characterization and in vitro biological evaluation of solid compounds from furazolidone-based cyclodextrins for use as leishmanicidal agents

The discovery of new drugs and dosage forms for the treatment of neglected tropical diseases, such as human and animal leishmaniasis, is gaining interest in the chemical, biological, pharmaceutical, and medical fields. Many pharmaceutical companies are exploring the use of old drugs to establishing new drug dosage forms and drug delivery systems, in particular for use in neglected diseases. The formation of complexes with cyclodextrins is widely used to improve the stability, solubility, and bioavailability of pharmaceutical drugs, as well as reduce both the toxicity and side effects of many of these drugs. The aim of this study was to characterize solid compounds obtained from the association between furazolidone (FZD) and β-cyclodextrin (β-CD) or hydroxypropyl-β-cyclodextrin (HP-β-CD). The solid compounds were prepared in molar ratios of 1:1 and 1:2 (drug:CD) by kneading and lyophilization. Molecular docking was used to predict the preferred relative orientation of FZD when bound in both studied cyclodextrins. The resulting solid compounds were qualitatively characterized by scanning electron microscopy (SEM), thermal analysis (DSC and TG/DTG), X-ray diffraction (XRD), Raman spectroscopy with image mapping (Raman mapping), and ¹³C nuclear magnetic resonance spectroscopy (¹³C NMR) in the solid state. The cytotoxicity of the compounds against THP-1 macrophages and the 50% growth inhibition (IC₅₀) against Leishmania amazonensis promastigote forms were subsequently investigated using in vitro techniques. For all of the solid compounds obtained, the existence of an association between FZD and CD were confirmed by one or more characterization techniques (TG/DTG, DSC, SEM, XRD, RAMAN, and ¹³C NMR), particularly by a significant decrease in the crystallinity of these materials and a reduction in the melting enthalpy associated with furazolidone thermal events. The formation of more effective interactions occurred in the compounds prepared by lyophilization, in a 1:2 molar ratio of the two CDs studied. However, the formation of an inclusion complex was confirmed only for the solid compound obtained from HP-β-CD prepared by lyophilization (LHFZD1:2). The absence of cytotoxicity on the THP-1 macrophage lineages and the leishmanicidal activity were confirmed for all compounds. MHFZD1:2 and LHFZD1:2 were found to be very active against promastigote forms of L. amazonensis, while all others were considered only active. These results are in line with the literature, demonstrating the existence of biological activity for associations between drugs and CDs in the form of complexes and non-complexes. All solid compounds obtained were found to be promising for use as leishmanicidal agents against promastigote forms of L. amazonensis.

Preparation and characterization of a new solid form of praziquantel, an essential anthelmintic drug. Praziquantel racemic monohydrate

Praziquantel (PZQ) is a highly effective low-cost anthelmintic agent used as the first-choice treatment against schistosomiasis. The low solubility of the active is a major drawback for pharmaceutical formulation. A valid approach of the pharmaceutical industry for the improvement of the pharmacotechnical features of the active principles (such as solubility, processability, stability, among others), is the preparation of new solid forms, such as salts, polymorph, and pseudo-polymorph. Herein we report the preparation and characterization of a new solid form PZQ. The PZQ monohydrate (PZQ-MH) was prepared by a solventless procedure from the commercial racemate and the product was characterized at the solid-state employing optical digital microscopy, thermal methods (melting point, differential scanning calorimetry and thermogravimetric analysis), as well as and mid-infrared and near infrared spectroscopies. The chemical structure and content of water were full assessed by ¹H nuclear magnetic resonance (NMR) in solution. The amount of water in PZQ-was also determined by different approaches, including thermogravimetric analysis and the loss on drying test. Solid-state ¹³C NMR (ssNMR) and X-ray powder diffraction (XRPD) completed the structural characterization of the new monohydrate. PZQ-MH showed a crystalline behavior during XRPD experiments and showed relevant differences in spectroscopic, calorimetric, ssNMR and XRPD signals when it was compared with the known crystal (Form A) and amorphous forms of PZQ. The determination of the intrinsic dissolution rate (IDR) of PZQ-MH was carried out as a functional characterization, observing that the new form had slightly higher IDR than Form A.

Exploring mechanochemical parameters using a DoE approach: Crystal structure solution from synchrotron XRPD and characterization of a new praziquantel polymorph

A rotated Doehlert matrix was utilized to explore the experimental design space around the milling parameters of Praziquantel (PZQ) polymorph B formation in terms of frequency and milling time. Three experimental responses were evaluated on the resulting ground samples: two quantitative responses, i.e. median particle size by Laser Light scattering (LLS) and drug recovery by HPLC, and one qualitative dependent variable, i.e. the obtained PZQ crystalline form, characterized through X-Ray Powder Diffraction (XRPD) and confirmed by Differential Scanning Calorimetry (DSC) and Thermogravimetric analysis (TGA). Temperature inside the jars was kept under constant control during the milling process by using temperature sensor equipped jars (thermojars), thus allowing evaluation of the obtained solid states at each experimental point, considering the specific temperature of the process. This explorative analysis led to the finding of a novel PZQ polymorph, named "Form C", produced without degradation, then fully characterized, including by means of Synchrotron XRPD, Polarimetric, FT-IR, SS-NMR, ESEM and saturation solubility. Crystal structure was solved from XRPD data and its geometry was optimized by DFT calculations (CASTEP). Finally, Form C and Form A activity against adult schistosoma mansoni were compared through in vitro testing, and Form C's physical stability checked. The new polymorph, crystallizing in space group I2/c, physically stable for approximately 2 months, showed a m.p. of 106.84 °C and displayed excellent biopharmaceutical properties (water solubility of 382.69±9.26 mg/l), while preserving excellent activity levels against adult schistosoma mansoni.

Enhanced dissolution and oral bioavailability of praziquantel by emulsification with human serum albumin followed by spray drying

The goal of this study was to enhance the oral bioavailability of praziquantel through its conjugation with human serum albumin (HSA). Praziquantel-HSA particles were produced by spray drying an emulsion of an aqueous solution of HSA and a solution of praziquantel in oil. The particles were agglomerates of multiple smooth corrugated particles containing amorphous praziquantel nearly equivalent to the theoretical doses. The solubility of praziquantel in an aqueous medium was enhanced in both the produced particles and the physical mixture. In addition, the dissolution rate in an aqueous medium was enhanced in the case of particles, but not in a physical mixture. Thus, the inclusion of HSA by emulsification followed by spray drying appeared to contribute to the enhanced dissolution rate. In a pharmacokinetic study, the maximum plasma concentration (C_max) and the area under the concentration-time curve (AUC) for the produced particles (HSA/praziquantel = 1/1 w/w) were approximately two times higher than the corresponding values for raw praziquantel. This increased oral bioavailability of the particles was considered to be due to the enhanced dissolution rate. This process for producing praziquantel-HSA particles could be useful in terms of improving the oral bioavailability of the other hydrophobic drugs.

Structural Elucidation of Poloxamer 237 and Poloxamer 237/Praziquantel Solid Dispersions: Impact of Poly(Vinylpyrrolidone) over Drug Recrystallization and Dissolution

Praziquantel (PZQ) is the recommended, effective, and safe treatment against all forms of schistosomiasis. Solid dispersions (SDs) in water-soluble polymers have been reported to increase solubility and bioavailability of poorly water-soluble drugs like PZQ, generally due to the amorphous form stabilization. In this work, poloxamer (PLX) 237 and poly(vinylpyrrolidone) (PVP) K30 were evaluated as potential carriers to revert PZQ crystallization. Binary and ternary SDs were prepared by the solvent evaporation method. PZQ solubility increased similarly with PLX either as binary physical mixtures or SDs. Such unpredicted data correlated well with crystalline PZQ and PLX as detected by solid-state NMR (ssNMR) and differential scanning calorimetry in those samples. Ternary PVP/PLX/PZQ SDs showed both ssNMR broad and narrow superimposed signals, thus revealing the presence of amorphous and crystalline PZQ, respectively, and exhibited the highest PZQ dissolution efficiency (up to 82% at 180 min). SDs with PVP provided a promising way to enhance solubility and dissolution rate of PZQ since PLX alone did not prevent recrystallization of amorphous PZQ. Based on ssNMR data, novel evidences on PLX structure and molecular dynamics were also obtained. As shown for the first time using ssNMR, propylene glycol and ethylene glycol constitute the PLX amorphous and crystalline components, respectively.

Schistosomiasis: Drugs used and treatment strategies

Neglected tropical diseases (NTDs) affect millions of people in different geographic regions, especially the poorest and most vulnerable. Currently NTDs are prevalent in 149 countries, seventeen of these neglected tropical parasitic diseases are classified as endemic. One of the most important of these diseases is schistosomiasis, also known as bilharzia, a disease caused by the genus Schistosoma. It presents several species, such as Schistosoma haematobium, Schistosoma japonicum and Schistosoma mansoni, the latter being responsible for parasitosis in Brazil. Contamination occurs through exposure to contaminated water in the endemic region. This parasitosis is characterized by being initially asymptomatic, but it is able to evolve into more severe clinical forms, potentially causing death. Globally, more than 200 million people are infected with one of three Schistosome species, including an estimated 40 million women of reproductive age. In Brazil, about 12 million children require preventive chemotherapy with anthelmintic. However, according to the World Health Organization (WHO), only about 15% of the at-risk children receive regular treatment. The lack of investment by the pharmaceutical industry for the development and/or improvement of new pharmaceutical forms, mainly aimed at the pediatric public, is a great challenge. Currently, the main forms of treatment used for schistosomiasis are praziquantel (PZQ) and oxaminiquine (OXA). PZQ is the drug of choice because it presents as a high-spectrum anthelmintic, used in the treatment of all known species of schistosomiasis and some species of cestodes and trematodes. OXA, however, is not active against the three Schistosome species. This work presents a literature review regarding schistosomiasis. It addresses points such as available treatments, the role of the pharmaceutical industry against neglected diseases, and perspectives for treatment.

Comparative in vitro and in vivo taste assessment of liquid praziquantel formulations

The taste of pharmaceuticals strongly affects the compliance of patients. This study investigated the applicability of the electronic tongue and rodent brief-access taste aversion (BATA) model for the bitter compound praziquantel (PZQ) and taste masked liquid formulations for PZQ. In a comparative study maltodextrin (MD) Kleptose^® linecaps 17 was selected as an alternative taste masking agent to two cyclodextrins; hydroxypropyl-beta-cyclodextrin (HP-β-CD) and sulfobutyl ether-beta-cyclodextrin (SBE-β-CD). A phase solubility study showed the highest affinity and solubilization capabilities for SBE-β-CD over HP-β-CD and MD, suggesting the highest taste masking ability for SBE-β-CD. No reliable results were achieved for PZQ with the Insent electronic tongue. Thus this system was not used for further evaluation of solutions with MD and CDs to confirm the results of the solubility study. In contrast the BATA model demonstrated conclusive responses for the aversiveness of PZQ. The concentration of PZQ inhibiting 50% of water lick numbers (called IC₅₀ value) was 0.06mg/ml. In contrast to the phase solubility study, the MD enabled an equal taste masking effect in vivo in comparison to both CDs. Moreover HP-β-CD showed superior taste masking capabilities for PZQ compared to SBE-β-CD as the SBE-β-CD itself was less acceptable for the rodents than HP-β-CD. In conclusion, the BATA model was identified as a more efficient taste assessment tool for the pure PZQ and liquid formulations in contrast to the electronic tongue and the phase solubility study.

Unexpected solvent impact in the crystallinity of praziquantel/poly(vinylpyrrolidone) formulations. A solubility, DSC and solid-state NMR study

The saturation solubility of PVP:PZQ physical mixtures (PMs) and solid dispersions (SDs) prepared from ethanol (E/E) or ethanol/water (E/W) by the solvent evaporation method at 1:1, 2:1 and 3:1 ratio (w/w) was determined. The presence of PVP improves the solubility of PZQ (0.31±0.01mg/mL). A maximum of 1.29±0.03mg/mL of PZQ in solution was achieved for the 3:1 SD (E/E). The amount of PZQ in solution depends on the amount of polymer and on the preparation method. Solid-state NMR (ssNMR) and DSC were used to understand this behavior. Results show that PMs are a mixture of crystalline PZQ with the polymer, while SDs show different degrees of drug amorphization depending on the solvent used. For E/W SDs, PZQ exists in amorphous and crystalline states, with no clear correlation between the amount of crystalline PZQ and the amount of PVP. For E/E SDs, formulations with a higher percentage of PZQ are amorphous with the components miscible in domains larger than 3nm ((1)H ssNMR relaxation measurements). Albeit its higher saturation solubility, the 3:1 E/E PVP:PZQ sample has a significant crystalline content, probably due to the water introduced by the polymer. High PVP content and small crystal size account for this result.