Efficacy assessment of self-assembled PLGA-PEG-PLGA nanoparticles: Correlation of nano-bio interface interactions, biodistribution, internalization and gene expression studies

Anti-EGFR immunoliposomes for cabazitaxel delivery: From formulation development to in vivo evaluation in prostate cancer xenograft model

Liposomes functionalized with monoclonal antibodies offer targeted therapy for cancer, boasting advantages like sustained drug release, enhanced stability, passive accumulation in tumors, and interaction with overexpressed receptors on cancer cells. This study aimed to develop and characterize anti-EGFR immunoliposomes loaded with cabazitaxel and assess their properties against prostate cancer in vitro and in vivo. Using a Box-Behnken design, a formulation with soy phosphatidylcholine, 10% cholesterol, and a 1:20 drug-lipid ratio yielded nanometric particle size, low polydispersity and high drug encapsulation. Immunoliposomes were conjugated with cetuximab through DSPE-PEG-Maleimide lipid anchor. Characterization confirmed intact antibody structure and interaction with EGFR receptor following conjugation. Cabazitaxel was dispersed within the liposomes in the amorphous state, confirmed by solid-state analyses. In vitro release studies showed slower cabazitaxel release from immunoliposomes. Immunoliposomes had enhanced cabazitaxel cytotoxicity in EGFR-overexpressing DU145 cells without affecting non-tumor L929 cells. Cetuximab played an important role to improve cellular uptake in a time-dependent fashion in EGFR-overexpressing prostate cancer cells. In vivo, immunoliposomes led to significant tumor regression, improved survival, and reduced weight loss in xenograft mice. While cabazitaxel induced leukopenia, consistent with clinical findings, histological analysis revealed no evident toxicity. In conclusion, the immunoliposomes displayed suitable physicochemical properties for cabazitaxel delivery, exhibited cytotoxicity against EGFR-expressing prostate cancer cells, with high cell uptake, and induced significant tumor regression in vivo, with manageable systemic toxicity.

Hyaluronic acid modified nanocarriers for aerosolized delivery of verteporfin in the treatment of acute lung injury

Verteporfin (VER), a photosensitizer used in macular degeneration therapy, has shown promise in controlling macrophage polarization and alleviating inflammation in acute lung injury (ALI)/acute respiratory distress syndrome (ARDS). However, its hydrophobicity, limited bioavailability, and side effects hinder its therapeutic potential. In this study, we aimed to enhance the therapeutic potential of VER through pulmonary nebulized drug delivery for ALI/ARDS treatment. We combined hydrophilic hyaluronic acid (HA) with an oil-in-water system containing a poly(lactic acid-co-glycolic acid) (PLGA) copolymer of VER to synthesize HA@PLGA-VER (PHV) nanoparticles with favorable surface characteristics to improve the bioavailability and targeting ability of VER. PHV possesses suitable electrical properties, a narrow size distribution (approximately 200 nm), and favorable stability. In vitro and in vivo studies demonstrated the excellent biocompatibility, safety, and anti-inflammatory responses of the PHV by suppressing M1 macrophage polarization while inducing M2 polarization. The in vivo experiments indicated that the treatment with aerosolized nano-VER (PHV) allowed more drugs to accumulate and penetrate into the lungs, improved the pulmonary function and attenuated lung injury, and mortality of ALI mice, achieving improved therapeutic outcomes. These findings highlight the potential of PHV as a promising delivery system via nebulization for enhancing the therapeutic effects of VER in ALI/ARDS.

Modulation of immunosuppressive effect of rapamycin via microfluidic encapsulation within PEG-PLGA nanoparticles

The high hydrophobicity and low oral availability of immunosuppressive drug, rapamycin, seriously limit its application. It was thus aimed to develop a PEG-PLGA based nano-loading system for rapamycin delivery to achieve improved bioavailability with sustained effects via a novel microfluidic chip and manipulation of the hydrophobic PLGA chain length. PDMS based microfluidic chip with Y shape was designed and PEG-PLGA polymers with different PLGA chain length were used to prepare rapamycin nano-delivery systems. Dendritic cells were selected to evaluate the immunosuppressive effect of the nanoparticles including cytotoxicity assay, dendritic cell activation, and cytokine levels. The effects of different PEG-PLGA nanoparticles on the immunomodulatory properties were finally compared. It was shown that PEG-PLGA could be successfully used for rapamycin encapsulation via microfluidics to obtain nano-delivery systems (Rapa&P-20 k, Rapa&P-50 k and Rapa&P-95 k) ranging from 100 nm to 116 nm. The encapsulation efficiency was ranged from 69.70% to 84.55% and drug loading from 10.45% to 12.68%. The Rapa&P-50 k (PLGA chain length: 50 k) could achieve the highest drug loading (DL) and encapsulation efficiency (EE) as 12.68% and 84.55%. The encapsulated rapamycin could be gradually released from three nanoparticles for more than 1 month without any noticeable burst release. The Rapa & P nanoparticles exhibited enhanced immunosuppressive effects over those of free rapamycin as shown by the expression of CD40 and CD80, and the secretion of IL-1β, IL-12 and TGF-β1. Rapa&P-50 k nanoparticles could be the optimal choice for rapamycin delivery as it also achieved the most effective immunosuppressive property. Hence, this study could provide an efficient technology with superior manipulation to offer a solution for rapamycin delivery and clinical application.

Investigating the Effect of Surface Hydrophilicity on the Destiny of PLGA-Poloxamer Nanoparticles in an In Vivo Animal Model

This study aimed to examine the impact of different surface properties of poly(lactic-co-glycolic) acid (PLGA) nanoparticles (P NPs) and PLGA-Poloxamer nanoparticles (PP NPs) on their in vivo biodistribution. For this purpose, NPs were formulated via nanoprecipitation and loaded with diphenylhexatriene (DPH), a fluorescent dye. The obtained NPs underwent comprehensive characterization, encompassing their morphology, technological attributes, DPH release rate, and thermodynamic properties. The produced NPs were then administered to wild-type mice via intraperitoneal injection, and, at scheduled time intervals, the animals were euthanized. Blood samples, as well as the liver, lungs, and kidneys, were extracted for histological examination and biodistribution analysis. The findings of this investigation revealed that the presence of poloxamers led to smaller NP sizes and induced partial crystallinity in the NPs. The biodistribution and histological results from in vivo experiments evidenced that both, P and PP NPs, exhibited comparable concentrations in the bloodstream, while P NPs could not be detected in the other organs examined. Conversely, PP NPs were primarily sequestered by the lungs and, to a lesser extent, by the kidneys. Future research endeavors will focus on investigating the behavior of drug-loaded NPs in pathological animal models.

Comparative Studies of the Uptake and Internalization Pathways of Different Lipid Nano-Systems Intended for Brain Delivery

Lipid nano-systems were prepared and characterized in a series of well-established in vitro tests that could assess their interactions with the hCMEC/D3 and SH-SY5Y cell lines as a model for the blood-brain barrier and neuronal function, accordingly. The prepared formulations of nanoliposomes and nanostructured lipid carriers were characterized by z-average diameters of ~120 nm and ~105 nm, respectively, following a unimodal particle size distribution (PDI < 0.3) and negative Z-potential (-24.30 mV to -31.20 mV). Stability studies implied that the nano-systems were stable in a physiologically relevant medium as well as human plasma, except nanoliposomes containing poloxamer on their surface, where there was an increase in particle size of ~26%. The presence of stealth polymer tends to decrease the amount of adsorbed proteins onto a particle's surface, according to protein adsorption studies. Both formulations of nanoliposomes were characterized by a low cytotoxicity, while their cell viability was reduced when incubated with the highest concentration (100 μg/mL) of nanostructured lipid formulations, which could have been associated with the consumption of cellular energy, thus resulting in a reduction in metabolic active cells. The uptake of all the nano-systems in the hCMEC/D3 and SH-SY5Y cell lines was successful, most likely following ATP-dependent internalization, as well as transport via passive diffusion.

The Advancement of Biodegradable Polyesters as Delivery Systems for Camptothecin and Its Analogues-A Status Report

Camptothecin (CPT) has demonstrated antitumor activity in lung, ovarian, breast, pancreas, and stomach cancers. However, this drug, like many other potent anticancer agents, is extremely water-insoluble. Furthermore, pharmacology studies have revealed that prolonged schedules must be administered continuously. For these reasons, several of its water-soluble analogues, prodrugs, and macromolecular conjugates have been synthesized, and various formulation approaches have been investigated. Biodegradable polyesters have gained popularity in cancer treatment in recent years. A number of biodegradable polymeric drug delivery systems (DDSs), designed for localized and systemic administration of therapeutic agents, as well as tumor-targeting macromolecules, have entered clinical trials, demonstrating the importance of biodegradable polyesters in cancer therapy. Biodegradable polyester-based DDSs have the potential to deliver the payload to the target while also increasing drug availability at intended site. The systemic toxicity and serious side-effects associated with conventional cancer therapies can be significantly reduced with targeted polymeric systems. This review elaborates on the use of biodegradable polyesters in the delivery of CPT and its analogues. The design of various DDSs based on biodegradable polyesters has been described, with the drug either adsorbed on the polymer's surface or encapsulated within its macrostructure, as well as those in which a hydrolyzed chemical bond is formed between the active substance and the polymer chain. The data related to the type of DDSs, the kind of linkage, and the details of in vitro and in vivo studies are included.

PLGA-Based Nanomedicine: History of Advancement and Development in Clinical Applications of Multiple Diseases

Research on the use of biodegradable polymers for drug delivery has been ongoing since they were first used as bioresorbable surgical devices in the 1980s. For tissue engineering and drug delivery, biodegradable polymer poly-lactic-co-glycolic acid (PLGA) has shown enormous promise among all biomaterials. PLGA are a family of FDA-approved biodegradable polymers that are physically strong and highly biocompatible and have been extensively studied as delivery vehicles of drugs, proteins, and macromolecules such as DNA and RNA. PLGA has a wide range of erosion times and mechanical properties that can be modified. Many innovative platforms have been widely studied and created for the development of methods for the controlled delivery of PLGA. In this paper, the various manufacturing processes and characteristics that impact their breakdown and drug release are explored in depth. Besides different PLGA-based nanoparticles, preclinical and clinical applications for different diseases and the PLGA platform types and their scale-up issues will be discussed.

Treatment outcomes of injectable thermosensitive hydrogel containing bevacizumab in intervertebral disc degeneration

Intervertebral disc (IVD) degeneration (IDD) is a common musculoskeletal disease and its treatment remains a clinical challenge. It is characterised by reduced cell numbers and degeneration of the extracellular matrix (ECM). Nucleus pulposus (NP) cells play a crucial role in this process. The purpose of this study is to explore the role of bevacizumab, a vascular endothelial growth factor (VEGF) inhibitor, in the treatment of IDD through local drug delivery. High expression of VEGF was observed in degenerating human and rat IVDs. We demonstrated that MMP3 expression was decreased and COL II synthesis was promoted, when VEGF expression was inhibited by bevacizumab, thereby improving the degree of disc degeneration. Thus, these findings provide strong evidence that inhibition of VEGF expression by local delivery of bevacizumab is safe and effective in ameliorating disc degeneration in rats. The injectable thermosensitive PLGA-PEG-PLGA hydrogels loaded with bevacizumab is a potential therapeutic option for disc degeneration.

Combined Shikonin-Loaded MPEG-PCL Micelles Inhibits Effective Transition of Endothelial-to-Mesenchymal Cells

Introduction

Shikonin is well known for its anti-inflammatory activity in cardiovascular diseases. However, the application of shikonin is limited by its low water solubility and poor bioavailability. Methoxy poly (ethylene glycol)-b-poly (ε-caprolactone) (MPEG-PCL) is considered a promising delivery system for hydrophobic drugs. Therefore, in this study, we prepared shikonin-loaded MPEG-PCL micelles and investigated their effect on endothelial-to-mesenchymal transition (EndMT) induced by inflammatory cytokines.

Methods

Shikonin was encapsulated in MPEG-PCL micelles using an anti-solvent method and the physiochemical characteristics of the micelles (particle size, zeta potential, morphology, critical micelle concentration (CMC), drug loading and encapsulation efficiency) were investigated. Cellular uptake of micelles in human umbilical vein endothelial cells (HUVECs) was evaluated using fluorescence microscopy. In vitro EndMT inhibition was explored in HUVECs by quantitative real-time PCR analysis.

Results

The average particle size of shikonin-loaded MPEG-PCL micelles was 54.57±0.13 nm and 60 nm determined by dynamic light scattering and transmission electron microscopy, respectively. The zeta potential was −6.23±0.02 mV. The CMC of the micelles was 6.31×10⁻⁷mol/L. The drug loading and encapsulation efficiency were 0.88±0.08% and 43.08±3.77%, respectively. The MPEG-PCL micelles significantly improved the cellular uptake of cargo with low water solubility. Real-time PCR analysis showed that co-treatment with TNF-α and IL-1β successfully induced EndMT in HUVECs, whereas this process was significantly inhibited by shikonin and shikonin-loaded MPEG-PCL micelles, with greater inhibition mediated by the shikonin-loaded MPEG-PCL micelles.

Conclusion

Shikonin-loaded MPEG-PCL micelles significantly improved the EndMT-inhibiting effect of the free shikonin. MPEG-PCL is suitable for use more generally as a lipophilic drug carrier.

Drug-loaded PEG-PLGA nanoparticles for cancer treatment

Nanoparticles based on single-component synthetic polymers, such as poly (lactic acid-co-glycolic acid) (PLGA), have been extensively studied for antitumor drug delivery and adjuvant therapy due to their ability to encapsulate and release drugs, as well as passively target tumors. Amphiphilic block co-polymers, such as polyethylene glycol (PEG)-PLGA, have also been used to prepare multifunctional nanodrug delivery systems with prolonged circulation time and greater bioavailability that can encapsulate a wider variety of drugs, including small molecules, gene-targeting drugs, traditional Chinese medicine (TCM) and multi-target enzyme inhibitors, enhancing their antitumor effect and safety. In addition, the surface of PEG-PLGA nanoparticles has been modified with various ligands to achieve active targeting and selective accumulation of antitumor drugs in tumor cells. Modification with two ligands has also been applied with good antitumor effects, while the use of imaging agents and pH-responsive or magnetic materials has paved the way for the application of such nanoparticles in clinical diagnosis. In this work, we provide an overview of the synthesis and application of PEG-PLGA nanoparticles in cancer treatment and we discuss the recent advances in ligand modification for active tumor targeting.

Reduced Cardiotoxicity of Ponatinib-Loaded PLGA-PEG-PLGA Nanoparticles in Zebrafish Xenograft Model

Tyrosine kinase inhibitors (TKIs) are the new generation of anti-cancer drugs with high potential against cancer cells’ proliferation and growth. However, TKIs are associated with severe cardiotoxicity, limiting their clinical value. One TKI that has been developed recently but not explored much is Ponatinib. The use of nanoparticles (NPs) as a better therapeutic agent to deliver anti-cancer drugs and reduce their cardiotoxicity has been recently considered. In this study, with the aim to reduce Ponatinib cardiotoxicity, Poly(D,L-lactide-co-glycolide)-b-poly(ethyleneoxide)-b-poly(D,L-lactide-co-glycolide) (PLGA-PEG-PLGA) triblock copolymer was used to synthesize Ponatinib in loaded PLGA-PEG-PLGA NPs for chronic myeloid leukemia (CML) treatment. In addition to physicochemical NPs characterization (NPs shape, size, size distribution, surface charge, dissolution rate, drug content, and efficacy of encapsulation) the efficacy and safety of these drug-delivery systems were assessed in vivo using zebrafish. Zebrafish are a powerful animal model for investigating the cardiotoxicity associated with anti-cancer drugs such as TKIs, to determine the optimum concentration of smart NPs with the least side effects, and to generate a xenograft model of several cancer types. Therefore, the cardiotoxicity of unloaded and drug-loaded PLGA-PEG-PLGA NPs was studied using the zebrafish model by measuring the survival rate and cardiac function parameters, and therapeutic concentration for in vivo efficacy studies was optimized in an in vivo setting. Further, the efficacy of drug-loaded PLGA-PEG-PLGA NPs was tested on the zebrafish cancer xenograft model, in which human myelogenous leukemia cell line K562 was transplanted into zebrafish embryos. Our results demonstrated that the Ponatinib-loaded PLGA-PEG-PLGA NPs at a concentration of 0.001 mg/mL are non-toxic/non-cardio-toxic in the studied zebrafish xenograft model.

Improvements in Drug-Delivery Properties by Co-Encapsulating Curcumin in SN-38-Loaded Anticancer Polymeric Nanoparticles

SN-38 is an immensely potent anticancer agent although its use necessitates encapsulation to overcome issues of poor solubility and stability. Since SN-38 is a notoriously challenging drug to encapsulate, new avenues to increase encapsulation efficiency in polymer nanoparticles (PNPs) are needed. In this paper, we show that nanoprecipitation with curcumin (CUR) increases SN-38 encapsulation efficiencies in coloaded SN-38/CUR-PNPs based on poly(ε-caprolactone)-block-poly(ethylene glycol) (PCL-b-PEG) by up to a factor of 10. In addition, we find a dramatic decrease in PNP polydispersities, from 0.34 to 0.07, as the initial CUR-to-polymer ratio increases from 0 to 10, with only a modest increase in PNP size (from 40 to 55 nm). Compared to coloaded PNP formation using nanoprecipitation in the bulk or in a gas-liquid, a two-phase microfluidic reactor shows similar trends with respect to CUR content, although improvements in SN-38 encapsulation efficiencies both with and without CUR are found using the microfluidic method. Additional precipitation studies without copolymer suggest that CUR increases the dispersion of SN-38 in the solvent medium of micelle formation, which may contribute to the observed encapsulation enhancement. Cytotoxicity studies of unencapsulated SN-38/CUR mixtures show that addition of CUR does not significantly affect SN-38 potency against either U87 (glioblastoma) or A204 (rhabdomyosarcoma) cell lines. However, we find significant differences in the potencies of SN-38/CUR-PNP formulations depending on initial CUR amounts, with an optimized formulation showing subnanomolar cytotoxicity against A204 cells, significantly more potent than either free SN-38 or PNPs containing only SN-38.

Design and evaluation of nanostructured lipid carriers loaded with Salvia officinalis extract for Alzheimer's disease treatment

Considering the potential of Salvia officinalis in prevention and treatment of Alzheimer's disease (AD), as well as the ability of nanostructured lipid carriers (NLC) to successfully deliver drug molecules across blood-brain barrier (BBB), the objective of this study was design, development, optimization and characterization of freeze-dried salvia officinalis extract (FSE) loaded NLC intended for intranasal administration. NLC were prepared by solvent evaporation method and the optimization was carried out using central composite design (CCD) of experiments. Further, the optimized formulation (NLCo) was coated either with chitosan (NLCc) or poloxamer (NLCp). Surface characterization of the particles demonstrated a spherical shape with smooth exterior. Particle size of optimal formulations after 0.45 μm pore size filtration ranged from 127 ± 0.68 nm to 140 ± 0.74 nm. The zeta potential was -25.6 ± 0.404 mV; 22.4 ± 1.106 mV and - 6.74 ± 0.609 mV for NLCo, NLCc, and NLCp, respectively. Differential scanning calorimetry (DSC) confirmed the formation of NLC whereas Fourier-transform infrared spectroscopy confirmed the FSE encapsulation into particles. All formulations showcased relatively high drug loading (>86.74 mcg FSE/mg solid lipid) and were characterized by prolonged and controlled release that followed Peppas-Sahlin in vitro release kinetic model. Protein adsorption studies revealed the lowest adsorption of the proteins onto NLCp (43.53 ± 0.07%) and highest protein adsorption onto NLCc (55.97 ± 0.75%) surface. The modified ORAC assay demonstrated higher antioxidative activity for NLCo (95.31 ± 1.86%) and NLCc (97.76 ± 4.00%) as compared to FSE (90.30 ± 1.53%). Results obtained from cell cultures tests pointed to the potential of prepared NLCs for FSE brain targeting and controlled release.

The impact of molecular tumor profiling on the design strategies for targeting myeloid leukemia and EGFR/CD44-positive solid tumors

Nanomedicine has emerged as a novel cancer treatment and diagnostic modality, whose design constantly evolves towards increasing the safety and efficacy of the chemotherapeutic and diagnostic protocols. Molecular diagnostics, which create a great amount of data related to the unique molecular signatures of each tumor subtype, have emerged as an important tool for detailed profiling of tumors. They provide an opportunity to develop targeting agents for early detection and diagnosis, and to select the most effective combinatorial treatment options. Alongside, the design of the nanoscale carriers needs to cope with novel trends of molecular screening. Also, multiple targeting ligands needed for robust and specific interactions with the targeted cell populations have to be introduced, which should result in substantial improvements in safety and efficacy of the cancer treatment. This article will focus on novel design strategies for nanoscale drug delivery systems, based on the unique molecular signatures of myeloid leukemia and EGFR/CD44-positive solid tumors, and the impact of novel discoveries in molecular tumor profiles on future chemotherapeutic protocols.

Research on the fate of polymeric nanoparticles in the process of the intestinal absorption based on model nanoparticles with various characteristics: size, surface charge and pro-hydrophobics

BACKGROUND

The use of drug nanocarriers to encapsulate drugs for oral administration may become an important strategy in addressing the challenging oral absorption of some drugs. In this study-with the premise of controlling single variables-we prepared model nanoparticles with different particle sizes, surface charges, and surface hydrophobicity/hydrophilicity. The two key stages of intestinal nanoparticles (NPs) absorption-the intestinal mucus layer penetration stage and the trans-intestinal epithelial cell stage-were decoupled and analyzed. The intestinal absorption of each group of model NPs was then investigated.

RESULTS

Differences in the behavioral trends of NPs in each stage of intestinal absorption were found to result from differences in particle properties. Small size, low-magnitude negative charge, and moderate hydrophilicity helped NPs pass through the small intestinal mucus layer more easily. Once through the mucus layer, an appropriate size, positive surface charge, and hydrophobic properties helped NPs complete the process of transintestinal epithelial cell transport.

CONCLUSIONS

To achieve high drug bioavailability, the basic properties of the delivery system must be suitable for overcoming the physiological barrier of the gastrointestinal tract.

Bile acid transporter mediated STC/Soluplus self-assembled hybrid nanoparticles for enhancing the oral drug bioavailability

The nano-particulate system for oral delivery faces a big challenge across the gastrointestinal bio-barriers. The aim was to explore the potential applications of bile acid transporter mediated the self-assembled hybrid nanoparticles (SHNPs) of sodium taurocholate (STC) and polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol (Soluplus) for augmenting the oral delivery of poorly water-soluble drugs. Felodipine (FLDP) was chosen as a model drug. The self-assembly of STC with Soluplus to load FLDP and the microstructure of the SHNPs were confirmed using molecular simulation, STC determination by high performance liquid chromatography (HPLC) and transmission electron microscope. Results showed that STC was integrated with Soluplus on the surface of nanoparticles by hydrophobic interactions. The permeability of FLDP loaded STC/Soluplus SHNPs was STC dependent in the ileum, which was inhibited by the higher concentrations of STC and the inhibitor of apical sodium-dependent bile acid transporter (ASBT). STC/Soluplus (1:9) SHNPs significantly improved the drug loading of FLDP, achieved the highest permeability of FLDP and realized 1.6-fold of the area under the curve (AUC) of Soluplus self-assembled nanoparticles (SNPs). A water-quenching fluorescent probe P4 was loaded into the STC/Soluplus SHNPs, which verified that the SHNPs were transferred intactly across the ileum. In conclusion, STC/Soluplus SHNPs via ASBT are a potential strategy for enhancing the oral bioavailability of poorly water-soluble drugs.

Preparation of Biodegradable PLGA-Nanoparticles Used for pH-Sensitive Intracellular Delivery of an Anti-inflammatory Bacterial Toxin to Macrophages

Poly(D,L-lactide-co-glycolic) acid (PLGA) is a synthetic copolymer that has been used to design micro/nanoparticles as a carrier for macromolecules, such as protein and nucleic acids, that can be internalized by the endocytosis pathway. However, it is difficult to control the intracellular delivery to target organelles. Here we report an intracellular delivery system of nanoparticles modified with bacterial cytotoxins to the endoplasmic reticulum (ER) and anti-inflammatory activity of the nanoparticles. Subtilase cytotoxin (SubAB) is a bacterial toxin in certain enterohemorrhagic Escherichia coli (EHEC) strains that cleaves the host ER chaperone BiP and suppresses nuclear factor-kappaB (NF-κB) activation and nitric oxide (NO) generation in macrophages at sub-lethal concentration. PLGA-nanoparticles were modified with oligo histidine-tagged (6 × His-tagged) recombinant SubAB (SubAB-PLGA) through a pH-sensitive linkage, and their translocation to the ER in macrophage cell line J774.1 cells, effects on inducible NO synthase (iNOS), and levels of tumor necrosis factor (TNF)-α cytokine induced by lipopolysaccharide (LPS) were examined. Compared with free SubAB, SubAB-PLGA was significantly effective in BiP cleavage and the induction of the ER stress marker C/EBP homologous protein (CHOP) in J774.1 cells. Furthermore, SubAB-PLGA attenuated LPS-stimulated induction of iNOS and TNF-α. Our findings provide useful information for protein delivery to macrophages and may encourage therapeutic applications of nanoparticles to the treatment of inflammatory diseases.

Isolation methods for particle protein corona complexes from protein-rich matrices

Background: Nanoparticles become rapidly encased by a protein layer when they are in contact with biological fluids. This protein shell is called a corona. The composition of the corona has a strong influence on the surface properties of the nanoparticles. It can affect their cellular interactions, uptake and signaling properties. For this reason, protein coronae are investigated frequently as an important part of particle characterization. Main body of the abstract: The protein corona can be analyzed by different methods, which have their individual advantages and challenges. The separation techniques to isolate corona-bound particles from the surrounding matrices include centrifugation, magnetism and chromatographic methods. Different organic matrices, such as blood, blood serum, plasma or different complex protein mixtures, are used and the approaches vary in parameters such as time, concentration and temperature. Depending on the investigated particle type, the choice of separation method can be crucial for the subsequent results. In addition, it is important to include suitable controls to avoid misinterpretation and false-positive or false-negative results, thus allowing the achievement of a valuable protein corona analysis result. Conclusion: Protein corona studies are an important part of particle characterization in biological matrices. This review gives a comparative overview about separation techniques, experimental parameters and challenges which occur during the investigation of the protein coronae of different particle types.

A temperature-sensitive phase-change hydrogel of tamoxifen achieves the long-acting antitumor activation on breast cancer cells

Background: Breast cancer is one of the foremost threats to female health nowadays. Tamoxifen, an antagonist of estrogen receptor-α (ERα), is the first choice for endocrine-dependent breast cancer (ERα-positive breast cancer) treatment. However, ERα has an important function in the normal physical regulation of estrogen, and current oral administration of tamoxifen has potential side effects on normal endocrine secretion. In the present work, we aim to develop novel approaches to increase the antitumor effect of tamoxifen on breast cancer cells and decrease the potential side effects in the human body during treatment. Methods: A temperature-sensitive phase-change hydrogel for tamoxifen (Tam-Gel) was generated. After establishing subcutaneous tumors formed by MCF-7, an ERα-positive breast cancer cell line, in nude mice, an intratumoral injection of Tam-Gel was performed to examine whether Tam-Gel facilitated the slow-release or antitumor effect of tamoxifen. A metastatic breast cancer model was established using the intrahepatic growth of MCF-7 cells in immunodeficient rats. Results: Tam-Gel can transform from liquid to hydrogel at room temperature. An intratumoral injection of Tam-Gel facilitated the slow-release or antitumor effect of tamoxifen. Once Tam-Gel, but not Tam-Sol, was administered by intratumoral injection, it significantly decreased the uptake of radionuclide probes (¹⁸F-fluoroestradiol or ¹⁸F-fluorodeoxyglucose) by cells in rats' livers and the intrahepatic growth of MCF-7 cells in rats' livers. Conclusion: A novel slow-release system was successfully prepared to facilitate the long-term release of tamoxifen in breast cancer tissues, and achieved an antitumor effect in the long term.

Microfluidic encapsulation of SN-38 in block copolymer nanoparticles: effect of hydrophobic block composition on loading and release properties

A gas–liquid microfluidic reactor was used to prepare polymer nanoparticles (PNPs) containing the drug 7-ethyl-10-hydroxy camptothecin (SN-38) from a series of poly(methyl caprolactone-co-caprolactone)-b-poly(ethylene oxide) (P(MCL-co-CL)-b-PEO) amphiphilic block copolymers with variable MCL content in the hydrophobic block. All three copolymers formed spheres with ∼20 nm core diameters by TEM, although some rigid rod-like aggregates were also formed by the PMCL-50 and PMCL-75 copolymers. SN-38 encapsulation efficiencies (EE = 2.7%–3.0%) and loading levels (DL = 2.0%–2.9%) were similar for the three copolymers. In vitro release kinetics became significantly slower as the MCL content increased, with release half times increasing monotonically from 3.4 to 6.2 h as the MCL content of the hydrophobic block increased from 50% to 100%. The ability to systematically tune release half times via controlled variation in the hydrophobic block composition, while maintaining constant PNP size and loading levels, represents an intriguing chemical handle for the optimization of SN-38 nanomedicines.

Microfluidic Manufacturing of SN-38-Loaded Polymer Nanoparticles with Shear Processing Control of Drug Delivery Properties

Two-phase gas-liquid microfluidic reactors provide shear processing control of SN-38-loaded polymer nanoparticles (SN-38-PNPs). We prepare SN-38-PNPs from the block copolymer poly(methyl caprolactone- co-caprolactone)- block-poly(ethylene oxides) (P(MCL- co-CL)- b-PEO) using bulk and microfluidic methods and at different drug-to-polymer loading ratios and on-chip flow rates. We show that, as the microfluidic flow rate ( Q) increases, encapsulation efficiency and drug loading increase and release half times increase. Slower SN-38 release is obtained at the highest Q value ( Q = 400 μL/min) than is achieved using a conventional bulk preparation method. For all SN-38-PNP formulations, we find a dominant population (by number) of nanosized particles (<50 nm) along with a small number of larger aggregates (>100 nm). As Q increases, the size of aggregates decreases through a minimum and then increases, attributed to a flow-variable competition of shear-induced particle breakup and shear-induced particle coalescence. IC₂₅ and IC₅₀ values of the various SN-38-PNPs against MCF-7 cells show strong flow rate dependencies that mirror trends in particle size. SN-38-PNPs manufactured on-chip at intermediate flow rates show both minimum particle sizes and maximum potencies with a significantly lower IC₂₅ value than the bulk-prepared sample. Compared to conventional bulk methods, microfluidic shear processing in two-phase reactors provides controlled manufacturing routes for optimizing and improving the properties of SN-38 nanomedicines.