Dermal miconazole nitrate nanocrystals – formulation development, increased antifungal efficacy & skin penetration

Prolonged retention of luliconazole nanofibers for topical mycotic condition: development, in vitro characterization and antifungal activity against Candida albicans

An antifungal agent, luliconazole, is commercially available in cream or gel form. The major limitation of these conventional formulations is less residence time at the infection site. The primary objective of this work was to develop luliconazole-loaded polyvinyl alcohol (Luz-PVA) nanofibers for mycotic skin conditions with a longer retention. Luz-PVA nanofibers were prepared by plate electrospinning and optimized for polymer concentration and process parameters. The optimized batch (Trial 5) was prepared by 10% PVA, processed at 22.4 kV applied voltage, and 14 cm plate and spinneret distance to yield thick, uniform, and peelable nanofibers film. There was no interaction observed between Luz and PVA in the FTIR study. DSC and XRD analysis showed that luliconazole was loaded into fabricated nanofibers with a reduced crystallinity. FESEM studies confirmed the smooth, defect-free mats of nanofibers. Luz-PVA nanofibers possessed a tensile strength of 21.8 N and a maximum elongation of 10.8%, representing the excellent elasticity of the scaffolds. For Luz-PVA nanofibers, the sustained and complete drug release was observed in 48 h. In antifungal activity using Candida albicans, the Luz-PVA nanofibers showed a greater zone of inhibition (30.55 ± 0.38 mm and 29.27 ± 0.31 mm) than marketed cream (28.06 ± 0.18 mm and 28.47 ± 0.24 mm) and pure drug (27.57 ± 0.17 mm and 27.50 ± 0.47 mm) at 1% concentration in Sabouraud dextrose agar and yeast malt agar, respectively. Therefore, Luz-PVA nanofibers exhibited good mechanical properties, longer retention time, and better antifungal activity than marketed products and, therefore, can be further examined preclinically as a potential treatment option for topical mycotic infection.

Anti-Melanoma Effects of Miconazole: Investigating the Mitochondria Involvement

Miconazole is an antimycotic drug showing anti-cancer effects in several cancers. However, little is known on its effects in melanoma. A375 and SK-MEL-28 human melanoma cell lines were exposed to miconazole and clotrimazole (up to 100 mM). Proliferation, viability with MTT assay and vascular mimicry were assayed at 24 h treatment. Molecular effects were measured at 6 h, namely, ATP-, ROS-release and mitochondria-related cytofluorescence. A metabolomic profile was also investigated at 6 h treatment. Carnitine was one of the most affected metabolites; therefore, the expression of 29 genes involved in carnitine metabolism was investigated in the public platform GEPIA2 on 461 melanoma patients and 558 controls. After 24 h treatments, miconazole and clotrimazole strongly and significantly inhibited proliferation in the presence of 10% serum on either melanoma cell lines; they also strongly reduced viability and vascular mimicry. After 6 h treatment, ATP reduction and ROS increase were observed, as well as a significant reduction in mitochondria-related fluorescence. Further, in A375, miconazole strongly and significantly altered expression of several metabolites including carnitines, phosphatidyl-cholines, all amino acids and several other small molecules, mostly metabolized in mitochondria. The expression of 12 genes involved in carnitine metabolism was found significantly modified in melanoma patients, 6 showing a significant impact on patients' survival. Finally, miconazole antiproliferation activity on A375 was found completely abrogated in the presence of carnitine, supporting a specific role of carnitine in melanoma protection toward miconazole effect, and was significantly reversed in the presence of caspases inhibitors such as ZVAD-FMK and Ac-DEVD-CHO, and a clear pro-apoptotic effect was observed in miconazole-treated cells, by FACS analysis of Annexin V-FITC stained cells. Miconazole strongly affects proliferation and other biological features in two human melanoma cell lines, as well as mitochondria-related functions such as ATP- and ROS-release, and the expression of several metabolites is largely dependent on mitochondria function. Miconazole, likely acting via carnitine and mitochondria-dependent apoptosis, is therefore suggested as a candidate for further investigations in melanoma treatments.

New Insights into Pharmaceutical Nanocrystals for the Improved Topical Delivery of Therapeutics in Various Skin Disorders

Nanotechnology has provided nanostructure-based delivery of drugs, among which nanocrystals have been investigated and explored for feasible topical drug delivery. Nanocrystals are nano-sized colloidal carriers, considered pure solid particles with a maximum drug load and a very small amount of stabilizer. The size or mean diameter of the nanocrystals is less than 1 μm and has a crystalline character. Prominent synthesis methods include the utilization of microfluidic- driven platforms as well as the milling approach, which is both adaptable and adjustable. Nanocrystals have shown a high capacity for loading drugs, utilization of negligible amounts of excipients, greater chemical stability, lower toxic effects, and ease of scale-up, as well as manufacturing. They have gained interest as drug delivery platforms, and the significantly large surface area of the skin makes it a potential approach for topical therapeutic formulations for different skin disorders including fungal and bacterial infections, psoriasis, wound healing, and skin cancers, etc. This article explores the preparation techniques, applications, and recent patents of nanocrystals for treating various skin conditions.

Advance and Challenges in the Treatment of Skin Diseases with the Transdermal Drug Delivery System

Skin diseases are among the most prevalent non-fatal conditions worldwide. The transdermal drug delivery system (TDDS) has emerged as a promising approach for treating skin diseases, owing to its numerous advantages such as high bioavailability, low systemic toxicity, and improved patient compliance. However, the effectiveness of the TDDS is hindered by several factors, including the barrier properties of the stratum corneum, the nature of the drug and carrier, and delivery conditions. In this paper, we provide an overview of the development of the TDDS from first-generation to fourth-generation systems, highlighting the characteristics of each carrier in terms of mechanism composition, penetration method, mechanism of action, and recent preclinical studies. We further investigated the significant challenges encountered in the development of the TDDS and the crucial significance of clinical trials.

Topical treatment of tea saponin stabilized silybin nanocrystal gel reduced oxidative stress in UV-induced skin damage

UV-induced peroxidation is a significant factor in skin damage. Some natural products have been utilized to protect the skin. However, most of them suffer from issues such as poor bioavailability. A promising strategy is to prepare them as safe and convenient gels. In this study, we constructed Silybin Nanocrystal Gel (SIL-NG). Tea saponin, a spatial stabilizer that we have previously reported, was used to prepare SIL-NS and subsequently combined with xanthan gum to prepare SIL-NG with an excellent safety profile. This nanogel with a natural stabilizer has a suitable ductility and shows a good safety profile in vitro and in vivo. In L929 cells, SIL-NG was able to reduce H₂O₂-induced ROS levels. In addition, SIL-NG exhibited better antioxidant activity compared to SIL-NS. SIL-NG was able to reduce UVB irradiation-induced oxidative damage in mice, significantly increase SOD activity, and reduce MDA levels. In conclusion, our work gives a new perspective on the treatment of UV skin damage using natural ingredients.

Nanoparticles for Topical Application in the Treatment of Skin Dysfunctions-An Overview of Dermo-Cosmetic and Dermatological Products

Nanomaterials (NM) arouse interest in various fields of science and industry due to their composition-tunable properties and the ease of modification. They appear currently as components of many consumer products such as sunscreen, dressings, sports clothes, surface-cleaning agents, computer devices, paints, as well as pharmaceutical and cosmetics formulations. The use of NPs in products for topical applications improves the permeation/penetration of the bioactive compounds into deeper layers of the skin, providing a depot effect with sustained drug release and specific cellular and subcellular targeting. Nanocarriers provide advances in dermatology and systemic treatments. Examples are a non-invasive method of vaccination, advanced diagnostic techniques, and transdermal drug delivery. The mechanism of action of NPs, efficiency of skin penetration, and potential threat to human health are still open and not fully explained. This review gives a brief outline of the latest nanotechnology achievements in products used in topical applications to prevent and treat skin diseases. We highlighted aspects such as the penetration of NPs through the skin (influence of physical-chemical properties of NPs, the experimental models for skin penetration, methods applied to improve the penetration of NPs through the skin, and methods applied to investigate the skin penetration by NPs). The review summarizes various therapies using NPs to diagnose and treat skin diseases (melanoma, acne, alopecia, vitiligo, psoriasis) and anti-aging and UV-protectant nano-cosmetics.

Development of a Self-Assembled Hydrogels Based on Carboxymethyl Chitosan and Oxidized Hyaluronic Acid Containing Tanshinone Extract Nanocrystals for Enhanced Dissolution and Acne Treatment

This study aimed to construct a pH-responsive nanocrystalline hydrogel drug delivery system for topical delivery of insoluble drugs based on the self-assembly behavior of carboxymethyl chitosan (CMC) and oxidized hyaluronic acid (OHA). The tanshinone nanocrystal (TNCs) extract was prepared by dielectric milling method, the type and ratio of stabilizer of the drug were investigated to optimize the prescription, and the effector surface method was used to optimize the preparation process. OHA was prepared by the sodium periodate oxidation method, and the concentration of CMC and OHA was optimized using gel formation time as an indicator. OHA was dissolved in TNCs and self-assembled with CMC solution to form tanshinone extract nanocrystal hydrogels (CMC-OHA/TNCs), of which the physicochemical properties and in vitro antibacterial activity were evaluated. Results showed that the optimized prescription and process could produce tanshinone extract nanocrystals with a particle size of (223.67 ± 4.03) nm and a polydispersity index (PDI) of 0.2173 ± 0.0008. According to SEM and XRD results, TNCs were completely wrapped in the hydrogel as nanoparticles, and the crystallinity of TNCs was reduced and the diffraction peaks in CMC-OHA/TNCs almost disappeared. In vitro, transdermal test results showed that CMC-OHA/TNCs could release the drug continuously at the acne lesions. The cell-counting kit-8 (CCK-8) assay confirmed that the CMC-OHA/TNCs had no obvious cytotoxicity. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of CMC-OHA/TNCs against Propionibacterium acnes and Staphylococcus aureus were significantly lower and the diameter of the inhibition circle was obviously higher than that of TNCs and tanshinone extract crude suspension. This study demonstrated that CMC-OHA/TNCs was a promising delivery system for topical delivery of insoluble drugs, which could improve the solubility of tanshinone extract and enhance its in vitro bacterial inhibitory activity.

Optimization, Characterization and In Vivo Evaluation of Mupirocin Nanocrystals for Topical Administration

Treatment of infectious skin conditions resulting from wounds and burns with topical antibiotics is challenging, particularly those caused by methicillin-resistant Staphylococcus aureus bacteria (MRSA). This is due to the formation of bacterial biofilms characterized by antimicrobial resistance. Mupirocin (MP), a widely used topical antibiotic, is active against gram-positive bacteria including MRSA. However, MP suffers from sub-optimal therapeutic efficacy due to its poor water-solubility and the significant rise in MP-resistant S. aureus. In this study, the physico-chemical characteristics of MP were modified through nanocrystallization to improve its therapeutic efficacy for the treatment of skin infections. Mupirocin-nanocrystals (MP-NC) were prepared using a nanoprecipitation technique and optimized using a D-optimal response surface design. The optimization of MP-NC produced ultra-small monodisperse spherical particles with a mean diameter of 70 nm and a polydispersity index of 0.2. The design resulted in two optimal MP-NC formulations that were evaluated by performing series of in vitro, ex vivo, microbiological, and in vivo studies. In-vitro results showed a 10-fold increase in the saturation solubility and a 9-fold increase in the dissolution rate of MP-NC. Ex vivo permeation studies, using pig ears skin, showed a 2-fold increase in the dermal deposition of MP-NC with the highest drug deposition occurring at 500-µm skin depth. Moreover, the optimal MP-NC formulations were lyophilized and incorporated into a 2% w/w cream. Microbiological studies revealed a 16-fold decrease in the minimum inhibitory concentration and the minimum bactericidal concentration of MP-NC. In vivo studies, using a rat excision burn wound model, demonstrated rapid and complete healing of infected burn wounds in rats treated with MP-NC cream in comparison to marketed Avoban ointment. Our results suggest that nanocrystallization of MP may provide an avenue through which higher levels of a topically applied MP can be permeated into the skin to reach relevant infectious areas and exert potential local antibacterial effects.

A Nanocrystals-Based Topical Drug Delivery System with Improved Dermal Penetration and Enhanced Treatment of Skin Diseases

Topical drug delivery methods are important in the treatment of skin diseases. Drug nanocrystals, which are nanometersized particles of active pharmaceutical ingredients, offer efficient topical delivery with high stability, high drug loading capacity, steady dissolution, and sustained drug release profiles. The use of nanocrystals for the topical delivery of skin disease therapies is currently being evaluated; this review focuses on how nanocrystals facilitate active pharmaceutical ingredient transport across skin barriers, exploring the underlying transportation mechanisms of the nanocrystals and active pharmaceutical ingredient molecules to the dermal and epidermal skin cells. In topical delivery, previous skin treatments, choice of excipients and vehicles, and penetration enhancement strategies critically influence the topical delivery of drug nanocrystals. Various research and applications of drug nanocrystals in skin disease therapy are highlighted in this review, and intellectual property protection for drug nanocrystal formulations, clinical trial data, and products with commercial potential are also discussed.

Influence of Stabilizer on the Development of Luteolin Nanosuspension for Cutaneous Delivery: An In Vitro and In Vivo Evaluation

Luteolin is a natural drug used as an antioxidant and anti-inflammatory, but unfortunately, it possesses low water solubility, which hinders its delivery via the skin. The main objective of this study was to prepare a luteolin-loaded nanosuspension by the antisolvent precipitation/sonication technique and study the effects of four stabilizers (two nonionic stabilizers, Pluronic F127 and Tween 80, and two polymeric stabilizers, HPMC and alginate) on the physicochemical properties of the prepared formulations. The selected formulations were incorporated into a gel base to evaluate their skin permeability and anti-inflammatory efficacy. The particle size was in the nanosize range (in the range from 468.1 ± 18.6 nm to 1024.8 ± 15.9 nm), while the zeta potential was negative and in the range from −41.7 ± 6.3 mV to −15.3 ± 1.9 mV. In particular, alginate-stabilized nanosuspensions showed the smallest particle size, the highest zeta potential value, and excellent stability due to the dual stabilizing effects (electrostatic and steric effects). The DSC results revealed a less crystalline structure of luteolin in lyophilized NS2 and NS12. Formulations stabilized by 1% Pluronic (NS2) and 2% alginate (NS12) were incorporated into a carbopol 940 gel base and showed good organoleptic character (homogenous with no evidenced phase separation or grittiness). In vitro dissolution studies showed that NS12 enhanced luteolin release rates, indicating the effect of particle size on the drug release pattern. On the other hand, NS2 showed enhanced skin permeability and anti-inflammatory effect in a carrageenan-induced paw edema model, revealing the surface activity role of the stabilizers. In conclusion, while alginate increased the nanosuspension stability by means of dual stabilizing effects, Pluronic F127 improved the skin delivery and pharmacodynamic efficacy of luteolin.

Progress in the development of stabilization strategies for nanocrystal preparations

In recent years, nanocrystal technology has been extensively investigated. Due to the submicron particle size and unique physicochemical properties of nanocrystals, they overcome the problems of low drug solubility and poor bioavailability. Although the structures of nanocrystals are simple, the further development of these materials is hindered by their stability. Drug nanocrystals with particle sizes of 1∼1000 nm usually require the addition of stabilizers such as polymers or surfactants to enhance their stability. The stability of nanocrystal suspensions and the redispersibility of solid nanocrystal drugs are the key factors for the large-scale production of nanocrystal preparations. In this paper, the factors that affect the stability of drug nanocrystal preparations are discussed, and related methods for solving the stability problem are put forward.

Albendazole Nanocrystal-Based Dissolving Microneedles with Improved Pharmacokinetic Performance for Enhanced Treatment of Cystic Echinococcosis

Cystic echinococcosis (CE) is a zoonosis caused by Echinococcus spp., affecting both humans and animals' lives. Current treatment of CE by oral administration of albendazole (ABZ) is hampered by several limitations. The poor aqueous solubility and the rapid metabolism of ABZ in the liver are the main issues, leading to lack of efficacy of the treatment. In the present study, we developed a nanocrystalline (NC) formulation of ABZ to be delivered intradermally using dissolving microneedles (DMNs). The NC formulation was developed using milling in an ultrasmall-scale device. Following several screenings, Pluronic F127 was selected as a suitable stabilizer, producing NCs with around 400 nm in size with narrow particle distribution. The crystallinity of ABZ was maintained as observed by DSC and XRD analysis. The NC approach was able to improve the dissolution percentage of ABZ by approximately three-fold. Furthermore, the incorporation of NCs into DMNs using the combination of poly(vinylpyrrolidone) and poly(vinyl alcohol) formed sharp needles with sufficient mechanical strength and insertion properties. Dermatokinetic studies revealed that >25% of ABZ was localized in the dermis of excised neonatal porcine skin up to 48 h after DMN administration. In in vivo pharmacokinetic studies, the AUC and relative bioavailability values of ABZ delivered by NC-loaded DMNs were found to be significantly higher than those obtained after oral administration of coarse suspension of ABZ or ABZ-NCs, as well as DMNs delivering coarse ABZ as indicated by the relative bioavailability values of >100%. Therefore, the combination approach developed in this study could maintain the systemic circulation of ABZ, which could be possibly caused by avoiding the first-pass metabolism in the liver. This could be beneficial to improve the efficacy of ABZ in CE treatment.

Enhancing Permeation of Drug Molecules Across the Skin via Delivery in Nanocarriers: Novel Strategies for Effective Transdermal Applications

The transdermal route of administration provides numerous advantages over conventional routes i.e., oral or injectable for the treatment of different diseases and cosmetics applications. The skin also works as a reservoir, thus deliver the penetrated drug for more extended periods in a sustained manner. It reduces toxicity and local irritation due to multiple sites for absorption and owes the option of avoiding systemic side effects. However, the transdermal route of delivery for many drugs is limited since very few drugs can be delivered at a viable rate using this route. The stratum corneum of skin works as an effective barrier, limiting most drugs' penetration posing difficulty to cross through the skin. Fortunately, some non-invasive methods can significantly enhance the penetration of drugs through this barrier. The use of nanocarriers for increasing the range of available drugs for the transdermal delivery has emerged as a valuable and exciting alternative. Both the lipophilic and hydrophilic drugs can be delivered via a range of nanocarriers through the stratum corneum with the possibility of having local or systemic effects to treat various diseases. In this review, the skin structure and major obstacle for transdermal drug delivery, different nanocarriers used for transdermal delivery, i.e., nanoparticles, ethosomes, dendrimers, liposomes, etc., have been discussed. Some recent examples of the combination of nanocarrier and physical methods, including iontophoresis, ultrasound, laser, and microneedles, have also been discussed for improving the therapeutic efficacy of transdermal drugs. Limitations and future perspectives of nanocarriers for transdermal drug delivery have been summarized at the end of this manuscript.

Etodolac nanosuspension based gel for enhanced dermal delivery: in vitro and in vivo evaluation

AIM

The objective of this study was to develop dermal nanosuspension (NS) based gel formulation of etodolac (ETD).

METHODS

Etodolac nanosuspension (ETD-NS) was prepared by wet milling method and dispersed in hydroxypropyl methylcellulose (NS-HPMC) or hydroxyethyl cellulose (NS-HEC) gels. Rheologic and mechanical properties were investigated. In vitro and ex vivo permeability studies were performed. Topical anti-inflammatory and analgesic activity were evaluated in regard to carrageenan-induced inflammatory paw oedema and radiant heat tail-flick method, respectively.

RESULTS

The ETD-NS with approximately 190 nm particle size (PS), 0.16 polydispersity index (PDI), and -15 mV zeta potential (ZP) values were obtained. The work of bioadhesion values of NS-HEC and NS-HPMC gels were 0.229 mJ/cm² for both gels. Dermal permeation of ETD from NS-HEC gel (7.18%) was found significantly higher than the NS-HPMC gel (4.56%). Enhanced anti-inflammatory and analgesic activity of NS-HEC gels were observed in comparison with micronised ETD.

CONCLUSIONS

ETD-NS based gel formulation is promising for topical delivery of ETD.

Preparation and in vitro / in vivo evaluation of flurbiprofen nanosuspension-based gel for dermal application

Flurbiprofen (FB) is an analgesic and anti-inflammatory drug, but its low water solubility (BCS Class II) limits its dermal bioavailability. The aim of this study is to develop a FB nanosuspension (NS) based gel and to evaluate its analgesic and anti-inflammatory activities in rats. FB-NS was produced by the wet milling method with Plantacare 2000^Ⓡ, as stabilizer. The FB-NS was then incorporated in different carrier gels such as hydroxypropyl methyl cellulose (HPMC), polycarbophil, oleogel, and chitosan. To select the optimum gel type, visual examinations, pH and rheological property measurements, texture profile analysis, in vitro release and ex vivo permeation studies were performed. Following these tests, the analgesic and anti-inflammatory activities of the optimum NS based gel were evaluated using the tail flick and carrageenan-induced paw edema methods consecutively. The NS was successfully prepared with the wet milling method, and the PS, PDI and ZP values were found to be 237.7 ± 6.8 nm, 0.133±0.030, and -30.4 ± 0.7 mV; respectively. Among the NS-based gels, HPMC gel showed more suitable rheological and mechanical properties, also the percentage of permeated FB and the flux value observed for HPMC gel were higher for HPMC than for the other gels. Thus, HPMC gel was selected as a carrier gel for in vivo pharmacodynamics studies. The anti-inflammatory activity of FB-NS HPMC gel was higher than that of the physical mixture gel and that of the coarse suspension gel. Results of our analgesic activity studies showed that, in the 180th min of FB nanosuspension treatment, the latency time was significantly prolonged compared to that of the control group (p<0.05). As a conclusion, while nanosuspensions increased the in vivo pharmacodynamics effect of FB by means of nanosized particles and a large surface area, the HPMC gel as a carrier prolonged the contact time of NSs with skin and eased the dermal application.

Potential of Nanoparticles as Permeation Enhancers and Targeted Delivery Options for Skin: Advantages and Disadvantages

The topical route of administration has many advantages for the treatment of various skin disorders as well as cosmeceutical purposes. This route bypasses hepatic first-pass effect and systemic availability of many pharmaceuticals is limited to skin organelles such as hair follicles and so could avoid unwanted adverse reactions and increase the localized therapeutic effect. Despite such attributed advantages of the topical route, the most important challenge is skin barrier characteristics that should be overcome to obtain dermal or trans-dermal drug delivery. Different approaches have been recruited to overcome this barrier. In this review, different types of nanoparticles for skin permeation enhancement and targeted delivery to skin organelles are discussed. The potential mechanisms of each nanocarrier in permeation enhancement and dermal delivery are considered and finally, the most important advantages and disadvantages of each group are summarized.

The effect of critical process parameters of the high pressure homogenization technique on the critical quality attributes of flurbiprofen nanosuspensions

Flurbiprofen (FB) is an effective nonsteroidal anti-inflammatory and BCS class II drug and its poor solubility plays a critical role in limiting its bioavailability. Nanosuspensions can be defined as nanosized colloidal dispersions of drug particles stabilized with stabilizers. The solubility of poor soluble drugs can be increased thanks to their small size and large surface area. The aim of this study is to optimize FB nanosuspensions. The formulations were stabilized with Plantacare 2000^® as a surfactant using a combination of High Speed Homogenization (HSH) and High Pressure Homogenization techniques (HPH). We also investigated the effects of the critical process parameters (CPPs) of these techniques (homogenization speed & time for HSH and homogenization pressure & cycle for HPH) on three critical quality attributes of nanosuspensions, being the particle size (PS), polydispersity index (PDI) and zeta potential (ZP). After the optimization of HSH, the macrosuspension was transferred to a high pressure homogenizer. After producing FB nanosuspensions by the HPH technique, seven processes which comprise different homogenization pressures, or combinations and different cycles, were applied. Due to the combination of HSH and HPH techniques and the optimization of CPPs, an optimum formulation for a dermal application was found using a 3³ full factorial design with these process parameters, and characterization studies were also performed.

Nanocrystals: An Overview of Fabrication, Characterization and Therapeutic Applications in Drug Delivery

Approximately 40 % drugs in the market are having poor aqueous solubility related problems and 70 % molecules in discovery pipeline are being practically insoluble in water. Nanocrystals is a prominent tool to solve the issue related to poor aqueous solubility and helps in improving the bioavailability of many drugs as reported in the literature. Nanocrystals can be prepared by top down methods, bottom up methods and combination methods. Many patented products such as Nanocrystals®, DissoCubes®, NANOEDGE® and SmartCrystals ®, etc., are available, which are based on these three preparation methodologies. The particle size reduction resulted into unstable nanocrystalline system and the phenomenon of Ostawald ripening occurs. This instability issue could be resolved by using an appropriate stabilizers or combination of stabilizers. The nanosuspensions could be transformed to the solid state to prevent particle aggregation in liquid state by employing various unit operations such as lyophilisation, spray drying, granulation and pelletisation. These techniques are well known for their scalability and continuous nanocrystal formation advantages. Nanocrystals can be characterized by using scanning electron microscopy, transmission electron microscopy, atomic force microscopy, differential scanning calorimetry, fourier transform infrared spectroscopy, powdered x- ray diffraction and photon correlation spectroscopy. The downscaling of nanocrystals will enable rapid optimization of nanosuspension formulation in parallel screening design of preclinical developmental stage drug moieties. One of the most acceptable advantages of nanocrystals is their wide range of applicability such as oral delivery, ophthalmic delivery, pulmonary delivery, transdermal delivery, intravenous delivery and targeting (brain and tumor targeting). The enhancement in market value of nanocrystals as well as the amount of nanocrystal products in the market is gaining attention to be used as an approach in order to get commercial benefits.

Preparation of luliconazole nanocrystals loaded hydrogel for improvement of dissolution and antifungal activity

Superficial fungal infection in immunocompromised patients can lead to many disorders and complications. Currently, new topical treatment options are critically needed to treat these fungal infections. Luliconazole (LZL) is a topical antifungal medicine used for fungal infection treatment. The purpose of this paper was to develop a new topical luliconazole nanocrystal (LNC) incorporated hydrogel. This study suggested the potential benefits of LNC embedded in a gel as a drug delivery system for topical antifungal treatments. Preliminary experiments were therefore carried out to characterize the LNC in comparison with raw drug. Prepared gel was homogeneous for human use with about 88 percent trapping, non-irritant and safe. Nano-systems showed an overall 5 fold enhancement in solubility, 4 fold increase in dissolution velocity, higher skin retention and better antifungal activity. Drugs retained from LNC hydrogel (N-GEL) in different skin layers within 8 h were the highest, i.e. 62.17% compared to coarse suspension (41.87%), nanosuspension (49.77%), D-GEL (55.76%). In addition, LNC and N-GEL had higher ZOI (41.20 ± 0.61mm and 44.25 ± 0.57mm respectively) than LZL and D-GEL (35.98 ± 0.81mm and 36.83 ± 0.83mm respectively). Therefore, it was observed that LNC loaded hydrogel was more effective in killing the fungus. Consequently, hydrogel incorporated with LNC could be a new approach with improved activity and increased dermal delivery for drugs with poor aqueous solubility rather than coarse drug containing gel.

Impact of Process Parameters on Particle Size Involved in Media Milling Technique Used for Preparing Clotrimazole Nanocrystals for the Management of Cutaneous Candidiasis

Clotrimazole is widely used for the management of cutaneous candidiasis infection. The low solubility of clotrimazole and excipient-related topical side effects (of currently available marketed products) cause the compromised efficacy of the therapy with poor patient compliance. In the present investigation, a clotrimazole nanocrystal-based nanogel was developed. Clotrimazole nanocrystals were optimized with studying the impact of individual process parameters of the media milling technique. The optimum level of individual process parameters was considered in the development of optimized batches. A promising result was obtained with a non-ionic stabilizer, polysorbate 80, at a concentration of 1.5%w/v, showing a distinct reduction in the particle size from above 31 μm to 264 nm and a polydispersity index of 0.211 with media milling at 1500 rpm for 6 h. This result was found to be in concordance with the TEM images, revealing a sharp diminution in particle morphology. Powder X-ray diffraction and differential scanning calorimetry results revealed crystallinity of clotrimazole (CTZ) in nanocrystal form. The optimized nanocrystal suspension was formulated into nanogel with carbopol 934, having a viscosity of 86.43 ± 2.06 Pa s at 25°C, which enhanced the ease of application of CTZ nanocrystals topically. A diffusion study showed around 82% of CTZ is transported across the membrane with the flux of 110.07 μg cm^-2 h^-1. In vivo results of the nanogel revealed improvement in CTZ release with 52% CTZ retention in different strata of the skin. The developed nanogel showed a significant improvement in the eradication of fungal infection within 10 days of application over Candida albicans-induced Wistar rat model. In a nutshell, the CTZ nanocrystal-loaded nanogel could achieve the goal of retaining CTZ in skin layers providing a prolonged effect and was able to treat cutaneous candidiasis in a short span with improved compliance for the candidiasis patients.