Investigating cascade impactor performance using a modified 3D printed induction port

In Vitro and In Silico Investigations on Drug Delivery in the Mouth-Throat Models with Handihaler®

This work aimed to evaluate the relative inhalation parameters that affect the deposition of inhaled aerosols, including mouth-throat morphology, airflow rate, and initial condition of emitted particles. In vitro experiments were conducted using the US Pharmacopeia (USP) throat and a realistic mouth-throat (RMT) with Handihaler®. Then, in silico study of the gas-solid flow was performed by computational fluid dynamics and discrete phase method. Results indicated that aerosol deposition in RMT was higher compared to that in USP throat at an airflow rate of 30 L/min, with 33.16 ± 7.84% and 21.11 ± 7.1% lung deposition in USP throat and RMT models, respectively, which showed a better correlation with in vivo data from the literature. Increasing airflow rate resulted in better drug aerosolization, while the fine particle dose trend ascended before declining, with the peak value obtained at a flow rate of 40 L/min. Overall, the effect of geometrical variation was more significant. Additionally, in silico results demonstrated clearly that the initial conditions of the emitted particles from inhalers affected the subsequent deposition. Larger momentum possessed by the central aerosol jet entering the mouth directly led to stronger impaction, which resulted in the deposition in the front region of mouth-throat models. This study is beneficial to develop an in silico method to understand the underlying mechanisms of in vivo mouth-throat deposition.

Additive manufacturing in respiratory sciences - Current applications and future prospects

Additive Manufacturing (AM) comprises a variety of techniques that enable fabrication of customised objects with specific attributes. The versatility of AM procedures and constant technological improvements allow for their application in the development of medicinal products and medical devices. This review provides an overview of AM applications related to respiratory sciences. For this purpose, both fields of research are briefly introduced and the potential benefits of integrating AM to respiratory sciences at different levels of pharmaceutical development are highlighted. Tailored manufacturing of microstructures as a particle design approach in respiratory drug delivery will be discussed. At the dosage form level, we exemplify AM as an important link in the iterative loop of data driven inhaler design, rapid prototyping and in vitro testing. This review also presents the application of bioprinting in the respiratory field for design of biorelevant in vitro cellular models, followed by an overview of AM-related processes in preventive and therapeutic care. Finally, this review discusses future prospects of AM as a component in a digital health environment.

Opportunities and challenges of physiologically based pharmacokinetic modeling in drug delivery

Physiologically based pharmacokinetic (PBPK) modeling is an important in silico tool to bridge drug properties and in vivo PK behaviors during drug development. Over the recent decade, the PBPK method has been largely applied to drug delivery systems (DDS), including oral, inhaled, transdermal, ophthalmic, and complex injectable products. The related therapeutic agents have included small-molecule drugs, therapeutic proteins, nucleic acids, and even cells. Simulation results have provided important insights into PK behaviors of new dosage forms, which strongly support drug regulation. In this review, we comprehensively summarize recent progress in PBPK applications in drug delivery, which shows large opportunities for facilitating drug development. In addition, we discuss the challenges of applying this methodology from a practical viewpoint.

In vitro-in vivo correlation of cascade impactor data for orally inhaled pharmaceutical aerosols

In vitro-in vivo correlation is the establishment of a predictive relationship between in vitro and in vivo data. In the context of cascade impactor results of orally inhaled pharmaceutical aerosols, this involves the linking of parameters such as the emitted dose, fine particle dose, fine particle fraction, and mass median aerodynamic diameter to in vivo lung deposition from scintigraphy data. If the dissolution and absorption processes after deposition are adequately understood, the correlation may be extended to the pharmacokinetics and pharmacodynamics of the delivered drugs. Correlation of impactor data to lung deposition is a relatively new research area that has been gaining recent interest. Although few in number, experiments and meta-analyses have been conducted to examine such correlations. An artificial neural network approach has also been employed to analyse the complex relationships between multiple factors and responses. However, much research is needed to generate more data to obtain robust correlations. These predictive models will be useful in improving the efficiency in product development by reducing the need of expensive and lengthy clinical trials.

(Solvato-) polymorphism of formulations of rifampicin for pulmonary drug delivery prepared using a crystallization/spray drying process

Rifampicin is an antibiotic used in tuberculosis therapy showing extensive (solvato-) polymorphism. Per oral administration of high doses is recommended, but application as dry powder for inhalation at the site of infection being the lungs, is desirable. Recrystallization from ethanol and consecutive spray drying is reported to yield a rifampicin dihydrate with suitable aerosol performance and stability. Nevertheless, the origin of water in the crystal remained unclear and demanded further investigation so to clarify its solid state throughout manufacture and storage. The present study reports the relationship of (solvato-) polymorphs occurring during manufacture and storage of samples recrystallized and spray dried from ethanol, methanol and water and it was concluded that processes involving a recrystallization from EtOH and MeOH produce particles of a common isostructural group of channel solvates. Samples recrystallized and spray dried from water were identified as members of another isostructural group, which was already characterized in literature. As a second aim, aerosol performance and storage stability of the formulations were investigated and all samples showed stable aerosol performance. Chemical stability of samples spray dried from ethanol was found suitable over a period of six months, whereas samples spray dried from methanol or water showed significant degradation.

Cascade Impactor Performance of Commercial pMDI Formulations Using Modified Induction Ports

The induction port (IP) for aerosol analysis with the Next Generation Pharmaceutical Impactor as monographed in the United States and European pharmacopoeia (USPIP) lacks physiological relevance, which, amongst other reasons, has been identified as critical for the predictability of in vitro aerosol data to lung deposition observed in vivo. In this publication, we report the impact of replacing the USPIP with two modified induction ports, which were designed based around geometries derived from a computer tomographic scan of a human trachea and the distal section of the USPIP. Test formulations were selected on the basis of availability of in vivo lung deposition data so that results obtained in vitro could be evaluated for their predictability. All formulations assessed showed increased deposition in the modified induction ports, and different mechanisms of particle deposition have been identified. In vitro predictions of the lung deposition were found to correlate well with the in vivo observations reported using the modified induction ports. Furthermore, the quality of the correlation was found superior to the one achieved with the USPIP with an average deviation of the predicted from observed values (n = 10) of 6 ± 4, 12 ± 6, and 16 ± 6% for the modified induction ports (mIP and mIPext) and the USPIP, respectively, when using a fine particle fraction (FPF) cutoff value of 5 μm. Using a FPF cutoff value of 3 μm yielded a more accurate in vitro-in vivo correlation with an average deviation of the predicted from observed values of 5 ± 4, 7 ± 5, and 8 ± 4% for the mIP, mIPext, and USPIP, respectively. For both FPF size cutoff values, the mIP yielded the most accurate in vitro-in vivo correlation.

Effect of USP Induction Ports, Glass Sampling Apparatus, and Inhaler Device Resistance on Aerodynamic Patterns of Fluticasone Propionate-Loaded Engineered Mannitol Microparticles

The present investigation is to study the effect of two different induction ports (IP), i.e., USP IP and USP-modified IP equipped with andersen cascade impactor on in vitro aerodynamic performance along with the impact of USP-modified glass sampling apparatus on delivered dose uniformity of fluticasone propionate (FP) dry powder inhaler (DPI). FP DPI was fabricated by spray drying technique using engineered mannitol microparticles (EMP) with different force controlling agents, i.e., leucine and magnesium stearate. Additionally, commercially available two DPI inhaler devices namely Handihaler® and Breezhaler® were used to aerosolize the FP blends. Spherical smooth surface of EMP showed good powder flow properties and acceptable percentage content uniformity (> 95%). Amounts of FP deposited in cascade assembly using USP-modified IP with the Breezhaler® device was significantly higher (1.32-fold) as compared with the Handihaler® device. Moreover, USP-modified IP showed better deposition as compared with USP IP. Additionally, both inhaler devices showed a satisfactory delivered dose (> 105%) for FP using modified glass sampling apparatus at a flow rate of 60 L/min for 2 s. It was interesting to note that not only formulation properties but also IP geometry and device resistance have significant impact on DPI deposition pattern. This study is a first detailed account of aerodynamic performance of FP using USP-modified IP and USP-modified glass sampling apparatus. Thus, it can be of potential importance for both the academic and industry perspective.

Probing the influence of lactose fines, a USP modified induction port and modified DDU apparatus on the aerodynamic behavior of a fluticasone propionate dry powder inhaler

The objective of the present study is to understand the effects of lactose fines, a USP modified induction port (IP) and USP modified glass sampling apparatus (DDU apparatus) on the aerodynamic behavior of a fluticasone propionate (FP) dry powder inhaler (DPI).

3D printed medicines: A new branch of digital healthcare

Three-dimensional printing (3DP) is a highly disruptive technology with the potential to change the way pharmaceuticals are designed, prescribed and produced. Owing to its low cost, diversity, portability and simplicity, fused deposition modeling (FDM) is well suited to a multitude of pharmaceutical applications in digital health. Favourably, through the combination of digital and genomic technologies, FDM enables the remote fabrication of drug delivery systems from 3D models having unique shapes, sizes and dosages, enabling greater control over the release characteristics and hence bioavailability of medications. In turn, this system could accelerate the digital healthcare revolution, enabling medicines to be tailored to the individual needs of each patient on demand. To date, a variety of FDM 3D printed medical products (e.g. implants) have been commercialised for clinical use. However, within pharmaceuticals, certain regulatory hurdles still remain. This article reviews the current state-of-the-art in FDM technology for medical and pharmaceutical research, including its use for personalised treatments and interconnection within digital health networks. The outstanding challenges are also discussed, with a focus on the future developments that are required to facilitate its integration within pharmacies and hospitals.