The rheological and textural characterization of Soluplus®/Vitamin E composites

Ternary solid dispersions of lacidipine: Enhancing dissolution and supersaturation maintenance through strategic formulation optimization

The study aimed to address the challenges related to insufficient dissolution and maintenance of supersaturation in binary solid dispersions. Lacidipine, categorized as a BCS class II drug, was employed as the model drug. A systematic screening of excipients was conducted to determine the most effective carriers for the formulations of the ternary solid dispersions, utilizing the solvent transfer method and equilibrium solubility measurements. Both binary and ternary solid dispersions were prepared via spray drying, and comprehensive physicochemical characterization confirmed the successful preparation of amorphous solid dispersions. In vitro dissolution tests, the ternary solid dispersion exhibited marked superiority over the binary solid dispersion in dissolution and maintenance of supersaturation. Furthermore, an exploration into the factors influencing the stability of ternary solid dispersions revealed their robust resistance under light-protected, room-temperature, and desiccated conditions. The formation of intermolecular hydrogen bonding within the molecules of the ternary solid dispersions significantly enhanced drug solubility and system stability. Strategic formulation optimization, coupled with judicious selection of suitable carrier types and ratios, may serve as a promising approach for designing supersaturated drug delivery systems.

Dual stimuli-responsive polymeric nanoparticles combining soluplus and chitosan for enhanced breast cancer targeting

A dual stimuli-responsive nanocarrier was developed from smart biocompatible chitosan and soluplus graft copolymers. The copolymerization was investigated by differential scanning calorimetry (DSC), thermo-gravimetric analysis (TGA), and Fourier transform infrared (FTIR). The optimized chitosan-soluplus nanoparticles (CS-SP NPs) were further used for the encapsulation of a poorly water-soluble anticancer drug. Tamoxifen citrate (TC) was used as the model drug and it was loaded in CS-SP NPs. TC CS-SP NPs were characterized in terms of particle size, zeta potential, polydispersity, morphology, encapsulation efficiency, and physical stability. The nanoparticles showed homogenous spherical features with a size around 94 nm, a slightly positive zeta potential, and an encapsulation efficiency around 96.66%. Dynamic light scattering (DLS), in vitro drug release, and cytotoxicity confirmed that the created nano-system is smart and exhibits pH and temperature-responsive behavior. In vitro cellular uptake was evaluated by flow cytometry and confocal microscopy. The nanoparticles revealed a triggered increase in size upon reaching the lower critical solution temperature of SP, with 70% of drug release at acidic pH and 40 °C within the first hour and a 3.5-fold increase in cytotoxicity against MCF7 cells incubated at 40 °C. The cellular uptake study manifested that the prepared nanoparticles succeeded in delivering drug molecules to MCF7 and MDA-MB-231 cells. In summary, the distinctive characteristics provided by these novel CS-SP NPs result in a promising nano-platform for effective drug delivery in cancer treatment.

Extrusion-based systems for topical and transdermal drug delivery

INTRODUCTION

Although the administration of drugs on the skin is a safe and noninvasive therapeutic alternative, producing formulations capable of disrupting the cutaneous barriers is still a challenge. In this scenario, extrusion-based techniques have emerged as disruptive technologies to ensure unique drug-excipient interactions that facilitate drug skin diffusion for systemic or local effect and even mean the key to obtain viable industrial products.

AREAS COVERED

This article presents a comprehensive overview of extrusion-based techniques in developing pharmaceutical dosage forms for topical or transdermal drug delivery. First, the theoretical basis of how extrusion-based techniques can optimize the permeation of drugs through the skin is examined. Then, the current state-of-the-art of drug products developed by extrusion-based techniques, specifically by hot-melt extrusion (HME) and fused deposition modeling (FDM) 3D printing, are discussed and contrasted with the current pharmaceutical processes.

EXPERT OPINION

A wide variety of pharmaceutical products can be obtained using HME and FDM 3D printing, including new dosage forms designed for a perfect anatomical fit. Despite the limitations of pharmaceutical products produced with HME and FDM 3D printing regarding thermal stability and available excipients, the advantages in industrial adaptability and improved bioavailability allied with patient-match devices certainly deserve full attention and investment.

Topical hydrophilic gel with itraconazole-loaded polymeric nanomicelles improves wound healing in the treatment of feline sporotrichosis

Sporotrichosis is a superficial fungal disease that can affect animals and humans. The high number of infected cats has been associated with zoonotic transmission and contributed to sporotrichosis being considered by the World Health Organization as one of the main neglected tropical fungal diseases for 2021-2030. Oral administration of itraconazole (ITZ) is the first choice for treatment, but it is expensive, time-consuming, and often related to serious adverse effects. As a strategy to optimize the treatment, we proposed the development of a hydrophilic gel with nanomicelles loaded with ITZ (HGN-ITZ). The HGN-ITZ was developed using an I-optimal design and characterized for particle size, Zeta potential, drug content, microscopic aspects, viscosity, spreadability, in vitro drug release, in vitro antifungal activity, and clinical evaluation in cats. The HGN-ITZ showed a high content of ITZ (97.3 ± 2.1 mg/g); and characteristics suitable for topical application (viscosity, spreadability, globules size, Zeta potential, controlled drug release). In a pilot clinical study, cats with disseminated sporotrichosis were treated with oral ITZ or HGN-ITZ + oral ITZ. A mortality rate of 21.3% was observed for the oral ITZ group compared to 5.3% for the HGN-ITZ + oral ITZ group. In a cat with a single lesion, topical treatment alone (HGN-ITZ) provided complete healing of the lesion in 45 days. No signs of topical irritation were observed during the treatments, suggesting that HGN-ITZ can be a promising strategy in the treatment of sporotrichosis.

Antioxidant Green Factories: Toward Sustainable Production of Vitamin E in Plant In Vitro Cultures

Vitamin E is a dietary supplement synthesized only by photosynthetic organisms and, hence, is an essential vitamin for human well-being. Because of the ever-increasing demand for natural vitamin E and limitations in existing synthesis modes, attempts to improve its yield using plant in vitro cultures have gained traction in recent years. With inflating industrial production costs, integrative approaches to conventional bioprocess optimization is the need of the hour for multifold vitamin E productivity enhancement. In this review, we briefly discuss the structure, isomers, and important metabolic routes of biosynthesis for vitamin E in plants. We then emphasize its vital role in human health and its industrial applications and highlight the market demand and supply. We illustrate the advantages of in vitro plant cell/tissue culture cultivation as an alternative to current commercial production platforms for natural vitamin E. We touch upon the conventional vitamin E metabolic pathway engineering strategies, such as single/multigene overexpression and chloroplast engineering. We highlight the recent progress in plant systems biology to rationally identify metabolic bottlenecks and knockout targets in the vitamin E biosynthetic pathway. We then discuss bioprocess optimization strategies for sustainable vitamin E production, including media/process optimization, precursor/elicitor addition, and scale-up to bioreactors. We culminate the review with a short discussion on kinetic modeling to predict vitamin E production in plant cell cultures and suggestions on sustainable green extraction methods of vitamin E for reduced environmental impact. This review will be of interest to a wider research fraternity, including those from industry and academia working in the field of plant cell biology, plant biotechnology, and bioprocess engineering for phytochemical enhancement.

Soluplus®-based dissolving microarray patches loaded with colchicine: towards a minimally invasive treatment and management of gout

Considered as one of the most common inflammatory arthritis, gout is characterised by a sudden onset of severe joint pain. As the first-line drug of choice used in treating acute gout, colchicine (CLC) is hindered by poor gastrointestinal permeability as well as unfavourable gastrointestinal side effects. Herein, we present, for the first time, the preparation of microarray array patches (MAPs) made of a polymeric solubiliser, Soluplus®, loaded with CLC for its systemic delivery. The fabricated MAPs displayed acceptable mechanical properties and were capable of being inserted into the skin to a depth of ≈500 μm in full thickness ex vivo neonatal porcine skin, as evidenced by optical coherence tomography. In vitro dermatokinetic studies utilising full thickness neonatal porcine skin demonstrated that the CLC-loaded MAPs delivered CLC across all skin strata, resulting in a delivery efficiency of 73% after 24 hours. Furthermore, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) and cell proliferation assays along with LIVE/DEAD™ staining on the 3T3-L1 cell line showed that the MAP formulation displayed minimal toxicity, with acceptable biocompatibility. Lastly, the anti-inflammatory properties of the formulation were evaluated using a THP-1 macrophage cell line. It was shown that treatment of THP-1 macrophages that are exposed to lipopolysaccharide (LPS) with CLC-loaded MAPs caused a significant (p < 0.05) reduction of TNF-α production, a pro-inflammatory cytokine typically associated with the early onset of acute gout. Accordingly, CLC-loaded MAPs could represent a new minimally-invasive alternative strategy for management of acute gout.

Effect of Processing on Bioactive Compounds, Antioxidant Activity, Physicochemical, and Sensory Properties of Orange Sweet Potato, Red Rice, and Their Application for Flake Products

Orange sweet potato (OSP) and red rice (RR) are rich sources of health benefit-associated substances and can be conventionally cooked or developed into food products. This research approach was to closely monitor the changes of bioactive compounds and their ability as antioxidants from the native form to the food products which are ready to be consumed. Moreover, this research explored the individual carotenoids and tocopherols of raw and cooked OSP and RR and their developed flake products, and also investigated their antioxidant activity, physicochemical properties, and sensory properties. Simultaneous identification using the liquid chromatographic method showed that OSP, RR, and their flake products have significant amounts (µg/g) of β-carotene (278.58–48.83), α-carotene (19.57–15.66), β-cryptoxanthin (4.83–2.97), α-tocopherol (57.65–18.31), and also γ-tocopherol (40.11–12.15). Different responses were observed on the bioactive compound and antioxidant activity affected by heating process. Meanwhile, OSP and RR can be combined to form promising flake products, as shown from the physicochemical analysis such as moisture (5.71–4.25%) and dietary fiber (13.86–9.47%) contents, water absorption index (1.69–1.06), fracturability (8.48–2.27), crispness (3.9–1.5), and color. Those quality parameters were affected by the proportions of OSP and RR in the flake products. Moreover, the preference scores (n = 120 panelists) for the flakes ranged from slightly liked to indifferent. It can be concluded that OSP and RR are potential sources of bioactive compounds which could act as antioxidants and could be developed into flake products that meet the dietary and sensory needs of consumers.

Understanding the Impact of Multi-factorial Composition on Efficient Loading of the Stable Ketoprofen Nanoparticles on Orodispersible Films Using Box-Behnken Design

The purpose of the present study was to prepare Orodispersible films (ODFs) loaded with ketoprofen nanoparticles (KT-NP). The Box-Behnken design was constructed in developing and optimizing the KTF-NP-ODFs. The effect of independent variables: Soluplus® concentration (X₁, stabilizer), Tween 80 concentration (X₂, surfactant), and KTF concentration (X₃, drug) were studied on the dependent variables: particle size (PS, Y₁), zeta potential (ZP, Y₂), and the polydispersity index (PDI, Y₃) of the NPs, as well as on the tensile strength (TS, Y₄) and permeability coefficient (PC, Y₅) of the KTF-NP-ODFs. Hydroxypropyl methylcellulose (HPMC E15) and polyethylene glycol (PEG 400) were used as the film former polymer and plasticizer, respectively, and their concentrations were kept constant for all formulations. KTF-NPs were prepared by antisolvent precipitation technology. This was followed by the addition of HPMC E15 and PEG 400 to prepare the ODFs using the solvent-casting method. The PS, PDI, and ZP for all the formulations were found in the range of 94 nm to 350 nm, 0.09 to 0.438, and -21.83 mV to -8.03 mV, respectively. The TS and PC of the prepared KTF-NP-ODFs were found between 1.21 MPa to 3.93 MPa and 3.12 × 10^-4 cm/h to 34.23 × 10^-4 cm/h, respectively. The amorphous nature of the KTF-NP in the ODFs was confirmed by the absence of characteristic crystalline peaks and endothermic events of KTF in X-ray diffraction (XRD) and modulated differential scanning calorimetry (mDSC), respectively. The optimized formulation showed ̴ 4 times higher permeability as compared to the pure KTF. In addition, the dissolution of pure KTF and the optimized KTF-NP-ODF in pH 1.2 at the end of 60 min was found to be ̴ 30% and ̴ 95%, respectively. Conclusively, KTF-NP-ODFs can be a promising drug delivery system to counter the issues related to dysphagia and bypass the common side effects, such as the gastric irritation associated with NSAIDs like KTF.

Preparation and characterization of aqueous vitamin E/Soluplus® dispersions for film coating applications

OBJECTIVE

The goals of this study were to (1) delineate a technique to prepare stable aqueous vitamin E/Soluplus® dispersions; (2) characterize films cast from the aqueous dispersions; and (3) demonstrate the utility of the aqueous dispersions in fluid bed coating applications. This study demonstrated the feasibility of using vitamin E in the preparation of amphiphilic film withs potential use in delayed-release coating applications.

METHODS

Low viscosity aqueous vitamin E/Soluplus® dispersions were prepared by first spray drying ethanolic vitamin E/Soluplus® solutions followed by high-shear homogenization of the solid dispersions in water. Concentrated (10%) aqueous dispersions containing 0%, 10%, 20%, and 30% of vitamin E in the binary blend with Soluplus® were then cast into films and characterized for contact angle and mechanical strength by texture analysis.

RESULTS

All films were hydrophilic and homogenous, which confirmed the utility of vitamin E as a plasticizer for the Soluplus® polymer. The 0% and 10% films were brittle whereas the 30% were tacky. The 20% dispersion was subsequently used to coat acetaminophen granules by a fluidized bed process to a dry weight gain of 10-30%. When tested by a dissolution study, a delay in acetaminophen release was observed as a function of weight gain.

CONCLUSION

The results from this study demonstrated that it is feasible to produce stable vitamin E/Soluplus® aqueous dispersions to be used as solvent-free functional film coating materials.

Vitamin E: A Review of Its Application and Methods of Detection When Combined with Implant Biomaterials

Vitamin E is a common compound used for tocopherols and tocotrienols (α, β, γ, δ); it is the component of many natural products of both plant and animal origin. Thanks to its powerful antioxidant capacity, vitamin E has been very successful in hip and knee arthroplasty, used to confer resistance to oxidation to irradiated UHMWPE. The positive results of these studies have made vitamin E an important object of research in the biomedical field, highlighting other important properties, such as anti-bacterial, -inflammatory, and -cancer activities. In fact, there is an extensive literature dealing with vitamin E in different kinds of material processing, drug delivery, and development of surface coatings. Vitamin E is widely discussed in the literature, and it is possible to find many reviews that discuss the biological role of vitamin E and its applications in food packaging and cosmetics. However, to date, there is not a review that discusses the biomedical applications of vitamin E and that points to the methods used to detect it within a solid. This review specifically aims to compile research about new biomedical applications of vitamin E carried out in the last 20 years, with the intention of providing an overview of the methodologies used to combine it with implantable biomaterials, as well as to detect and characterize it within these materials.

Development of binary dispersions and nanocomposites of irbesartan with enhanced antihypertensive activity

Introduction: Irbesartan (IBS), an angiotensin II receptor (AT1 subtype) antagonist which blocks the vasoconstrictor and aldosterone-secreting effects of angiotensin II by selective binding to AT1 angiotensin II receptor. It belongs to BCS class II drug (low aqueous solubility and high permeability). Improvement of dissolution characteristics of the drug by formulating is being investigated in the current study.

Methods: Solid dispersions (SD) formulations were prepared by the melting fusion technique and nanocomposites (NC) were prepared by a single emulsion technique. Eight batches of SD and three batches of NC were formulated in three ratios of drug to polymer (1:1, 1:2, and 1:3). The batches were evaluated for equilibrium solubility studies, Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM), field emission SEM (FESEM), transmission electron microscopy (TEM), and in vitro dissolution studies.

Results: Solubility studies revealed maximum solubility at a 1:2 ratio of solid dispersions and a 1:1 ratio of nanocomposites. No drug-polymer interaction was observed in FTIR results. DSC, SEM, and XRD analysis revealed changes in drug crystallinity i.e. conversion to the amorphous state of drugs. Nanosize of particles in the NC1 batch was confirmed in TEM studies. Solid dispersions and nanocomposites showed significant enhancement of dissolution in comparison to that of the pure drug (100% drug release in approximately 1 hour).

Conclusion: Nanocomposites proved superior carriers to solid dispersions in terms of the dissolution enhancement. Further, in vivo studies indicated that the induction of systolic and diastolic blood pressure in the optimized formulation (NC1) was significantly decreased in comparison to the disease control group (P <0.01) at all time intervals along with pure drug (P <0.05).

Magnesium Filled Polylactic Acid (PLA) Material for Filament Based 3D Printing

The main objective of this research is to prove the viability of obtaining magnesium (Mg) filled polylactic acid (PLA) biocomposites as filament feedstock for material extrusion-based additive manufacturing (AM). These materials can be used for medical applications, thus benefiting of all the advantages offered by AM technology in terms of design freedom and product customization. Filaments were produced from two PLA + magnesium + vitamin E (α-tocopherol) compositions and then used for manufacturing test samples and ACL (anterior cruciate ligament) screws on a low-cost 3D printer. Filaments and implant screws were characterized using SEM (scanning electron microscopy), FTIR (fourier transform infrared spectrometry), and DSC (differential scanning calorimetry) analysis. Although the filament manufacturing process could not ensure a uniform distribution of Mg particles within the PLA matrix, a good integration was noticed, probably due to the use of vitamin E as a precursor. The results also show that the composite biomaterials can ensure and maintain implant screws structural integrity during the additive manufacturing process.

The physiochemical, mechanical, and adhesive properties of solvent-cast vitamin E/Soluplus® films

Soluplus® is an amphiphilic graft copolymer used in hot melt extrusion applications and electrospinning. Very little information is available on the use of Soluplus® as a film former and in the development of film-based formulations. The overall aim of this work was to study the mechanical and adhesive properties of Soluplus® films prepared by the solvent casting technique. More specifically, we discovered that vitamin E can serve as a plasticizer for the Soluplus® polymer and to significantly modulate its mechanical and adhesive properties. Vitamin E (0-75% w/w) and Soluplus® were dissolved in ethanol and cast on liners to produce transparent films. Cast films were tested for their physiochemical properties by IR, XRD, and MDSC, and for their adhesive and mechanical properties by texture analysis. Vitamin E was found to be miscible with Soluplus® and to reduce the crystallinity of the films. Vitamin E also decreased the films' tensile strength and Young's modulus while significantly increasing their percent elongation. The most notable effect was the observed increase in the adhesiveness (tackiness) and hydrophobicity of the films, which was evidenced by a significant increase in their water contact angle and a decrease in their swelling capacity and disintegration. These observations indicated that vitamin E/Soluplus® blends might be used for the preparation of highly pliable films, especially when made with 30-50% vitamin E, and in the development of a new type of pressure sensitive adhesive films when prepared with ≥65% vitamin E load.