Salmeterol Xinafoate (SX) loaded into mucoadhesive solid lipid microparticles for COPD treatment

Effects of condensates from volcanic fumaroles and cigarette smoke extracts on airway epithelial cells

The impact of volcanic airborne products on airway epithelium homeostasis is largely unknown. This study assessed the effects of volcanic Fumarole Condensates (FC) alone or combined with Cigarette Smoke Extracts (CSE) on airway epithelial cells (16HBE and A549). Chemical composition of FC was analyzed by gas chromatography and HPLC. Cells were exposed to FC and IL-33 and IL-8 were assessed. The effects of FC and CSE on cell injury were evaluated assessing cell metabolism/cell viability, mitochondrial stress, cell apoptosis/cell necrosis, and cell proliferation. FC contained: water vapor (70-97%), CO2 (3-30%), acid gases (H2S, SO2, HCl, HF) around 1%. FC increased the intracellular IL-33 but differently modulated IL-33 and IL-8 gene expression and IL-8 release in the tested cell lines. FC without/with CSE: (a) increased cell metabolism/cell viability in 16HBE, while decreased it in A549; (b) increased mitochondrial stress in both cell types. FC with CSE increased cell necrosis in A549 in comparison to CSE alone. CSE reduced cell proliferation in 16HB,E while increased it in A549 and FC counteracted these effects in both cell types. Overall, FC induce a pro-inflammatory profile associated to a metabolic reprogramming without a relevant toxicity also in presence of CSE in airway epithelial cells.

Inhalable microparticles as drug delivery systems to the lungs in a dry powder formulations

Inhalation-administrated drugs remain an interesting possibility of addressing pulmonary diseases. Direct drug delivery to the lungs allows one to obtain high concentration in the site of action with limited systemic distribution, leading to a more effective therapy with reduced required doses and side effects. On the other hand, there are several difficulties in obtaining a formulation that would meet all the criteria related to physicochemical, aerodynamic and biological properties, which is the reason why only very few of the investigated systems can reach the clinical trial phase and proceed to everyday use as a result. Therefore, we focused on powders consisting of polysaccharides, lipids, proteins or natural and synthetic polymers in the form of microparticles that are delivered by inhalation to the lungs as drug carriers. We summarized the most common trends in research today to provide the best dry powders in the right fraction for inhalation that would be able to release the drug before being removed by natural mechanisms. This review article addresses the most common manufacturing methods with novel modifications, pros and cons of different materials, drug loading capacities with release profiles, and biological properties such as cytocompatibility, bactericidal or anticancer properties.

Nanocarrier-based approaches to combat chronic obstructive pulmonary disease

Abnormalities in airway mucus lead to chronic disorders in the pulmonary system such as asthma, fibrosis and chronic obstructive pulmonary disease (COPD). Among these, COPD is more prominent worldwide. Various conventional approaches are available in the market for the treatment of COPD, but the delivery of drugs to the target site remains a challenge with conventional approaches. Nanocarrier-based approaches are considered the best due to their sustained release properties to the target site, smaller size, high surface-to-volume ratio, patient compliance, overcoming airway defenses and improved pharmacotherapy. This article provides updated information about the treatment of COPD along with nanocarrier-based approaches as well as the potential of gene therapy and stem cell therapy to combat the COPD.

Targeting mucus barrier in respiratory diseases by chemically modified advanced delivery systems

Mucus gel constitutes of heavily cross-linked mucin fibers forming a viscoelastic, dense porous network that coats all the exposed epithelia not covered with the skin. The layer provides protection to the underlying gastrointestinal, respiratory, and female reproductive tracts, in addition to the organs such as the surface of eye by trapping the pathogens, irritants, environmental fine particles, and potentially hazardous foreign matter. However, this property of mucus gel poses a substantial challenge for realizing the localized and sustained drug delivery across the mucosal surfaces. The mucus permeating particles that spare the protective properties of mucus gel improve the therapeutic potency of the drugs aimed at the management of diseases, including sexually transmitted infections, lung cancer, irritable bowel disease, degenerative eye diseases and infections, and cystic fibrosis. As such, the mucoadhesive materials conjugated with drug molecules display a prolonged retention time in the mucosal gel that imparts a sustained release of the deliberated drug molecules across the mucosa. The contemporarily developed mucus penetrating materials for drug delivery applications comprise of a finer size, appreciable hydrophilicity, and a neutral surface to escape the entrapment within the cross-inked mucus fibers. Pertaining to the mucus secretion as a first line of defence in respiratory tract in response to the invading physical, chemical, and biological pathogens, the development of mucus penetrating materials hold promise as a stalwart approach for revolutionizing the respiratory drug delivery paradigm. The present review provides an epigrammatic collation of the mucus penetrating/mucoadhesive materials for achieving a controlled/sustained release of the cargo pharmaceutics and drug molecules across the respiratory mucus barrier.

Surface Modification of Lipid-Based Nanoparticles

There is a growing interest in the development of lipid-based nanocarriers for multiple purposes, including the recent increase of these nanocarriers as vaccine components during the COVID-19 pandemic. The number of studies that involve the surface modification of nanocarriers to improve their performance (increase the delivery of a therapeutic to its target site with less off-site accumulation) is enormous. The present review aims to provide an overview of various methods associated with lipid nanoparticle grafting, including techniques used to separate grafted nanoparticles from unbound ligands or to characterize grafted nanoparticles. We also provide a critical perspective on the usefulness and true impact of these modifications on overcoming different biological barriers, with our prediction on what to expect in the near future in this field.

Novel Fluticasone Propionate and Salmeterol Fixed-Dose Combination Nano-Encapsulated Particles Using Polyamide Based on L-Lysine

One of the key challenges in developing a dry powder inhaler (DPI) of an inhalable potent fixed-dose combination (FDC) is the ability of the formulation to generate an effective and reproducible aerosol able to reach the lower parts of the lungs. Herein, a one-step approach is presented to expedite the synthesis of nanoaggregates made from a biocompatible and biodegradable polyamide based on L-lysine amino acid employing market-leading active pharmaceutical ingredients (fluticasone propionate (FP) and salmeterol xinafoate (SAL)) for the management of asthma. The nanoaggregates were synthesized using interfacial polycondensation that produced nanocapsules with an average particle size of 226.7 ± 35.3 nm and zeta potential of −30.6 ± 4.2 mV. Differential scanning calorimetric analysis and x-ray diffraction, as well as scanning electron microscopy of the produced FDC, revealed the ability of the produced nanocapsules to encapsulate the two actives and display the best aerodynamic performance. The FDC nanocapsules displayed 88.5% and 98.5% of the emitted dose for FP and SAL, respectively. The fine particle fraction of the nominated dose was superior to the marketed product (Seretide Diskus®, Brentford, United Kingdom). The in-vitro release study showed an extended drug release profile. Our findings suggest that nanoaggregates using polyamides based on L-lysine and interfacial polycondensation can serve as a good platform for pulmonary drug delivery of FDC systems.

Value of refined care in patients with acute exacerbation of chronic obstructive pulmonary disease

BACKGROUND

Under physiological conditions, sputum produced during acute exacerbation of chronic obstructive pulmonary disease (AECOPD) can move passively with the cilia in the airway; the sputum is gradually excreted from the depth of the airways through the stimulation of the coughing reflex on the sensory nerve on the surface of the airway. However, when the sputum is thick, the cough is weak, or the tracheal cilia are abnormal, sputum accumulation may occur and affect the exchange of oxygen and carbon dioxide in the lung. Furthermore, the presence of pathogenic microorganisms in sputum may cause or aggravate the symptoms of pulmonary infection in patients, which is the main factor leading to AECOPD. Therefore, promoting effective drainage of sputum and maintaining airway opening are key points requiring clinical attention.

AIM

To explore the effect of refined nursing strategies in patients with AECOPD and dysphagia.

METHODS

We selected 126 patients with AECOPD and difficulty of expectoration at our hospital, and divided them into a refined care group and a routine care group, with 63 cases each, using a random number table. The two groups of patients were treated with expectorant, anti-infection, oxygen inhalation, and other basic treatment measures; patients in the refined care group were given refined nursing intervention during hospitalization, and the routine care group received conventional nursing intervention. The differences in sputum expectoration, negative pressure suction rate, blood gas parameters, dyspnea score measured through the tool developed by the Medical Research Council (MRC), and quality of life were compared between the two groups.

RESULTS

After 7 d of intervention, the sputum expectoration effect of the refined care group was 62.30%, the effective rate was 31.15%, and the inefficiency rate was 6.56%. The sputum expectoration effect of the routine care group was 44.07%, the effective rate was 42.37%, and the inefficiency rate was 13.56%. The refined care group had better sputum expectoration than the routine care group (P < 0.05). The negative pressure suction rate in the refined care group was significantly lower than that of the routine care group during the treatment (22.95% vs 44.07%, P < 0.05). Before the intervention, the arterial oxygen saturation (PaO₂) and arterial carbon dioxide saturation (PaCO₂) values were not significantly different between the two groups (P > 0.05); the PaO₂ and PaCO₂ values in the refined care group were comparable to those in the routine care group after 7 d of intervention (P > 0.05). Before the intervention, there was no significant difference in the MRC score between the two groups (P > 0.05); the MRC score of the refined care group was lower than that of the routine care group after 7 d of intervention, but the difference was not statistically significant (P > 0.05). Before intervention, there was no significant difference in the symptoms, activities, disease impact, or St. George’s Respiratory questionnaire (SGRQ) total scores between the two groups (P> 0.05). After 7 days of intervention, the symptoms, activities, and total score of SGRQ of the refined care group were higher than those of the routine care group, but the difference was not statistically significant (P > 0.05).

CONCLUSION

AECOPD with thick sputum, weak coughing reflex, and abnormal tracheal cilia function will lead to sputum accumulation and affect the exchange of oxygen and carbon dioxide in the lung. Patients with AECOPD who have difficulty expectorating sputum may undergo refined nursing strategies that will promote expectoration, alleviate clinical symptoms, and improve the quality of life.

Progress in the Application of Nano- and Micro-based Drug Delivery Systems in Pulmonary Drug Delivery

Nanotechnology is associated with the development of particles in the nano-size range that can be used in a wide range of applications in the medical field. It has gained more importance in the pharmaceutical research field particularly in drug delivery, as it results in enhanced therapeutic drug performance, improved drug solubility, targeted drug delivery to the specific sites, minimized side effects, and prolonged drug retention time in the targeted site. To date, the application of nanotechnology continues to offer several benefits in the treatment of various chronic diseases and results in remarkable improvements in treatment outcomes. The use of nano-based delivery systems such as liposomes, micelles, and nanoparticles in pulmonary drug delivery have shown to be a promising strategy in achieving drug deposition and maintained controlled drug release in the lungs. They have been widely used to minimize the risks of drug toxicity in vivo. In this review, recent advances in the application of nano- and micro-based delivery systems in pulmonary drug delivery for the treatment of various pulmonary diseases, such as lung cancer, asthma, and chronic obstructive pulmonary disease, are highlighted. Limitations in the application of these drug delivery systems and some key strategies in improving their formulation properties to overcome challenges encountered in drug delivery are also discussed.

Novel drug delivery systems targeting oxidative stress in chronic obstructive pulmonary disease: a review

Oxidative stress is significantly involved in the pathogenesis and progression of chronic obstructive pulmonary disease (COPD). Combining antioxidant drugs or nutrients results in a noteworthy therapeutic value in animal models of COPD. However, the benefits have not been reproduced in clinical applications, this may be attributed to the limited absorption, concentration, and half-life of exogenous antioxidants. Therefore, novel drug delivery systems to combat oxidative stress in COPD are needed. This review presents a brief insight into the current knowledge on the role of oxidative stress and highlights the recent trends in novel drug delivery carriers that could aid in combating oxidative stress in COPD. The introduction of nanotechnology has enabled researchers to overcome several problems and improve the pharmacokinetics and bioavailability of drugs. Large porous microparticles, and porous nanoparticle-encapsulated microparticles are the most promising carriers for achieving effective pulmonary deposition of inhaled medication and obtaining controlled drug release. However, translating drug delivery systems for administration in pulmonary clinical settings is still in its initial phases.

Microencapsulation of Fluticasone Propionate and Salmeterol Xinafoate in Modified Chitosan Microparticles for Release Optimization

Chitosan (CS) is a natural polysaccharide, widely studied in the past due to its unique properties such as biocompatibility, biodegradability and non-toxicity. Chemical modification of CS is an effective pathway to prepare new matrices with additional functional groups and improved properties, such as increment of hydrophilicity and swelling rate, for drug delivery purposes. In the present study, four derivatives of CS with trans-aconitic acid (t-Acon), succinic anhydride (Succ), 2-hydroxyethyl acrylate (2-HEA) and acrylic acid (AA) were prepared, and their successful grafting was confirmed by FTIR and ¹H-NMR spectroscopies. Neat chitosan and its grafted derivatives were fabricated for the encapsulation of fluticasone propionate (FLU) and salmeterol xinafoate (SX) drugs, used for chronic obstructive pulmonary disease (COPD), via the ionotropic gelation technique. Scanning electron microscopy (SEM) micrographs demonstrated that round-shaped microparticles (MPs) were effectively prepared with average sizes ranging between 0.4 and 2.2 μm, as were measured by dynamic light scattering (DLS), while zeta potential verified in all cases their positive charged surface. FTIR spectroscopy showed that some interactions take place between the drugs and the polymeric matrices, while X-ray diffraction (XRD) patterns exhibited that both drugs were encapsulated in MPs’ interior with a lower degree of crystallinity than the neat drugs. In vitro release studies of FLU and SX exposed a great amelioration in the drugs’ dissolution profile from all modified CS’s MPs, in comparison to those of neat drugs. The latter fact is attributed to the reduction in crystallinity of the active substances in the MPs’ interior.