Development of nanoparticle-based orodispersible palatable pediatric formulations

The interplay of poorly soluble drugs in dissolution from amorphous solid dispersions

In recent years, the application of fixed dose combinations of antiretroviral drugs in HIV therapy has been established. Despite numerous therapeutic benefits, this approach poses several challenges for the formulation development especially when poorly soluble drugs are considered. Amorphous solid dispersions (ASD) thereby have gained considerable interest in the pharmaceutical field, however, mainly including binary systems containing only one drug and a polymer. The co-formulation of two amorphous drugs can be accompanied by an immense increase in the complexity of the system as exemplarily reported for ritonavir and lopinavir embedded in a composite polymer matrix of PVPVA. The present study aims to present a new formulation approach to overcome the well-documented interaction during dissolution. Two different polymers, PVPVA and HPMCAS were used to produce ASDs for both drugs individually via hot-melt extrusion. The embedding of lopinavir in the slower dissolving polymer HPMCAS, while using PVPVA for ritonavir was found to significantly improve the overall dissolution performance compared to the individual use of PVPVA as well as to the commercial product Kaletra®. In addition, the use of different grades of HPMCAS demonstrated the possibility to further modify the dissolution profile. For a preliminary biorelevant assessment, the selected formulations were tested in a biphasic dissolution setup.

State of the art in pediatric nanomedicines

In recent years, the continuous development of innovative nanopharmaceuticals is expanding their biomedical and clinical applications. Nanomedicines are being revolutionized to circumvent the limitations of unbound therapeutic agents as well as overcome barriers posed by biological interfaces at the cellular, organ, system, and microenvironment levels. In many ways, the use of nanoconfigured delivery systems has eased challenges associated with patient differences, and in our opinion, this forms the foundation for their potential usefulness in developing innovative medicines and diagnostics for special patient populations. Here, we present a comprehensive review of nanomedicines specifically designed and evaluated for disease management in the pediatric population. Typically, the pediatric population has distinguishing needs relative to those of adults majorly because of their constantly growing bodies and age-related physiological changes, which often need specialized drug formulation interventions to provide desirable therapeutic effects and outcomes. Besides, child-centric drug carriers have unique delivery routes, dosing flexibility, organoleptic properties (e.g., taste, flavor), and caregiver requirements that are often not met by traditional formulations and can impact adherence to therapy. Engineering pediatric medicines as nanoconfigured structures can potentially resolve these limitations stemming from traditional drug carriers because of their unique capabilities. Consequently, researchers from different specialties relentlessly and creatively investigate the usefulness of nanomedicines for pediatric disease management as extensively captured in this compilation. Some examples of nanomedicines covered include nanoparticles, liposomes, and nanomicelles for cancer; solid lipid and lipid-based nanostructured carriers for hypertension; self-nanoemulsifying lipid-based systems and niosomes for infections; and nanocapsules for asthma pharmacotherapy.

Development of Child-Friendly Lisdexamfetamine Chewable Tablets Using Ion Exchange Resin as a Taste-Masking Carrier Based on the Concept of Quality by Design (QbD)

Taste masking is critical to improving the compliance of pediatric oral dosage forms. However, it is challenging for extremely bitter lisdexamfetamine dimesylate (LDX) with a long half-life and given in large dose. The present study aims to develop an immediate-release, taste-masked lisdexamfetamine chewable tablet. Lisdexamfetamine-resin complexes (LRCs) were prepared using the batch method. The molecular mechanism of taste masking was explored by PXRD, PLM, STA, and FT-IR. The results showed that taste masking was attributed to the ionic interaction between drug and the resin. The ion exchange process conformed to first-order kinetics. The rate-limiting step of drug release was the diffusion of ions inside the particles, and the concentration of H⁺ was the key factor for immediate release. The masking efficiency of the prepared LRCs in saliva exceeded 96%, and the drug could be completely released within 15 min in aqueous HCl (pH 1.2). Furthermore, the SeDeM expert system was used for the first time to comprehensively study the powder properties of LRCs and to quickly visualize their defects (compressibility, lubricity/stability, and lubricity/dosage). The selection of excipients was targeted rather than traditional screening, thus obtaining a robust chewable tablet formulation suitable for direct compression. Finally, the difference between chewable tablets containing LRCs and chewable tablets containing lisdexamfetamine dimesylate was compared by in vitro dissolution test, electronic tongue, and disintegration test. In conclusion, an immediate-released, child-friendly lisdexamfetamine chewable tablets without bitterness was successfully developed by the QbD approach, using the SeDeM system, which may help in further development of chewable tablets.

Orally disintegrating drug carriers for paediatric pharmacotherapy

Non-compliance, dosing inaccuracy, choking risk, flavour, and instability, are some of the issues associated with paediatric, oral dosage forms - tablets, capsules, solutions, and suspensions. Orally disintegrating drug carriers, a dosage form with growing interest, are thought to overcome several of the challenges associated with these conventional formulations by rapidly disintegrating within the buccal cavity without the need for water. This review serves as an up-to-date report on the various types of orodispersible delivery systems, currently being developed or commercialized, by detailing their characteristics, manufacturing processes, and applications in the paediatric population. Mentioned are orodispersible tablets, films, wafers and lyophilisates, mini-tablets, capsules, granules, electrospun fibers and webs. Also highlighted are the choice of excipients, quality control requirements, and expected pharmacokinetics of orally disintegrating drug carriers concerning the paediatric population. Overall, orodispersible formulations, particularly tablets, films, and lyophilisates/wafers, have shown to be a valuable addition to medication administration in minors, thus the execution of more targeted research and development activities is expected to lead to enhanced paediatric care and outcomes.

Downstream processing of amorphous solid dispersions into orodispersible tablets

The formulation development of amorphous solid dispersions (ASDs) towards a patient-friendly oral solid dosage form is proving to be still challenging. To increase patient's compliance orodispersible tablets (ODTs) can be seen as promising alternative. Two different ASDs were prepared via hot melt extrusion (HME), using PVPVA as polymer for ritonavir (RTV) and HPMCAS for lopinavir (LPV). The extrudates were milled, sieved, and blended with Hisorad® (HRD) or Ludiflash® (LF), two established co-processed excipients (CPE) prior to tableting. Interestingly, the selected ASD particle size was pointed out to be a key parameter for a fast disintegration and high mechanical strength. In terms of PVPVA based ASDs, larger particle sizes > 500 µm enabled a rapid disintegration even under 30 s for 50 % ASD loaded ODTs, whereas the use of smaller particles went along with significant higher disintegration times. However, the influence of the CPE was immense for PVPVA based ASDs, since it was only possible to prepare well performing ODTs, when Hisorad® was chosen. In contrast for HPMCAS based ASDs the selection of smaller particle sizes 180-500 µm was beneficial for overcoming the poor compressibility of the ASD matrix polymer. ODTs with LPV could be produced using both CPEs even with higher ASD loads up to 75 %, while still showing remarkably fast disintegration.

Role of Nanotechnology in Taste Masking: Recent Updates

One of the important parameters in the case of dosage form is taste. Most of the drugs available in oral dosage form have an unpleasant taste which leads to patient incompliance and affects the success ratio of products in the market. Geriatric and paediatric patients suffer more with the bitter taste of medicines. According to the studies reported, it is found that 50% of the population have the problem swallowing tablets, especially the pediatric and geriatric population. Masking the taste of bitter drugs has become necessary in the pharmaceutical field and increasing interest of researchers to develop various methods for masking the bitter taste of drugs. Five major tastes, felt by our tongue are salt, sour, sweet, bitter, and umami. When the drug dissolves with saliva, drug molecules interact with taste receptors present on the tongue and give taste sensations. Although, many solid oral dosage forms like pills, and tablets have an additional advantage of masking and encapsulation of bitter taste drugs; however, they might not be effective for children because they may or may not swallow pills or tablets. There are various other methods that mask the bitter taste of drugs such as the addition of sweeteners and flavouring agents, granulation, coating, inclusion complexes, extrusion method, ion-exchange resins, etc, discussed in the first section of the article. The second part of this article consists of various nanotechnology-based drug delivery systems that were fabricated by researchers to mask the bitter taste of drugs. A brief of recent literature on various nanocarriers that were fabricated or developed for taste masking has been discussed in this part. A better understanding of these methods will help researchers and pharmaceutical industries to develop novel drug delivery systems with improved taste masking properties.

Orally Dispersible Dosage Forms for Paediatric Use: Current Knowledge and Development of Nanostructure-Based Formulations

The paediatric population has always suffered from a lack of medicines tailored to their needs, especially in terms of accurate dosage, stability and acceptability. Orodispersible dosage forms have gone through a resurrection as an alternative to liquid formulations or fractioned solid formulations, although they are still subject to several inconveniences, among which the unpleasant taste and the low oral bioavailability of the API are the most significant hurdles in the way of achieving an optimal drug product. Nanostructures can address these inconveniences through their size and variety, owing to the plethora of materials that can be used in their manufacturing. Through the formation and functionalisation of nanostructures, followed by their inclusion in orodispersible dosage forms, safe, stable and acceptable medicines intended for paediatric use can be developed.

Pharmacotechnical Evaluation by SeDeM Expert System to Develop Orodispersible Tablets

Sediment delivery model (SeDeM) system is innovative tool to correlate micromeritic properties of powders with compressibility. It involves computation of indices which facilitate direct compressibility of solids and enable corrective measures through particle engineering. Study had multiple objectives, viz, (i) to enhance solubility of BCS class II, nevirapine using solid dispersions; (ii) SeDeM analyses of excipients and solid dispersions to analyze direct compressibility; and (iii) prepare orodispersible tablets (ODT). Solid dispersions were prepared by solvent evaporation. Superdisintegrants and solid dispersions were analyzed for primary indices of dimension, compressibility, flowability, stability, and disgregability derived from micromeritic properties. Radar diagrams were constructed to provide visual clues to deficient properties for direct compressibility. ODTs were prepared using excipients which passed criteria for direct compressibility and evaluated for tablet properties. Solid dispersions with Eudragit S100 revealed 6 to 10 fold increase in solubility in various dissolution media including biorelevant media in comparison with plain drug. Solubility was found to be pH dependent. SeDeM analyses facilitated identification of superdisintegrants and excipients with unfavorable compressibility. Radar diagrams provided a clear pictorial evidence of lacunae in powder properties. Based on SeDeM results, tablets were formulated by direct compression using crosspovidone, croscarmellose sodium, and mannitol. All batches showed 40% release in first minute in simulated salivary fluid.

Orodispersible tablets for pediatric drug delivery: current challenges and recent advances

INTRODUCTION

Child appropriate dosage forms are indispensable in modern medicine and are a prerequisite for successful pediatric drug therapy. For years, experts have called for a paradigm shift, from liquid dosage forms to novel oral solid dosage forms. This review aims to shed light on recent developments in Orodispersible tablets (ODTs) and mini-tablets (ODMTs).

AREAS COVERED

This review focuses on the presentation and critical discussion of current challenges as well as recent advances in ODTs for pediatric drug delivery. Highlighted aspects are the evidence for acceptability by children, e.g. in comparison to other dosage forms, and limitations given by tablet size at different ages, as well as advances in special ODT formulations (taste masking, modified release, enabling formulations).

EXPERT OPINION

It is the authors' belief that OD(M)Ts have significant potential as dosage forms in pediatric therapy that has not yet been fully exploited. The reasons for this are, first, that the number of direct acceptance studies is extremely low and the resulting knowledge is therefore rather anecdotal. Despite the high relevance, there seems to be reluctance both in the therapeutic use and conduction of respective studies in children. However, if one combines the knowledge from the few existing studies, surveys, and from approved products, it becomes apparent that so far there is no evidence on limitations of the use of ODTs in pediatric patients.

Orodispersible Membranes from a Modified Coaxial Electrospinning for Fast Dissolution of Diclofenac Sodium

The dissolution of poorly water-soluble drugs has been a longstanding and important issue in pharmaceutics during the past several decades. Nanotechnologies and their products have been broadly investigated for providing novel strategies for resolving this problem. In the present study, a new orodispersible membrane (OM) comprising electrospun nanofibers is developed for the fast dissolution of diclofenac sodium (DS). A modified coaxial electrospinning was implemented for the preparation of membranes, during which an unspinnable solution of sucralose was explored as the sheath working fluid for smoothing the working processes and also adjusting the taste of membranes. SEM and TEM images demonstrated that the OMs were composed of linear nanofibers with core-sheath inner structures. XRD and ATR-FTIR results suggested that DS presented in the OMs in an amorphous state due to the fine compatibility between DS and PVP. In vitro dissolution measurements and simulated artificial tongue experiments verified that the OMs were able to release the loaded DS in a pulsatile manner. The present protocols pave the way for the fast dissolution and fast action of a series of poorly water-soluble active ingredients that are suitable for oral administration.

Eudragit®: A Versatile Family of Polymers for Hot Melt Extrusion and 3D Printing Processes in Pharmaceutics

Eudragit® polymers are polymethacrylates highly used in pharmaceutics for the development of modified drug delivery systems. They are widely known due to their versatility with regards to chemical composition, solubility, and swelling properties. Moreover, Eudragit polymers are thermoplastic, and their use has been boosted in some production processes, such as hot melt extrusion (HME) and fused deposition modelling 3D printing, among other 3D printing techniques. Therefore, this review covers the studies using Eudragit polymers in the development of drug delivery systems produced by HME and 3D printing techniques over the last 10 years. Eudragit E has been the most used among them, mostly to formulate immediate release systems or as a taste-masker agent. On the other hand, Eudragit RS and Eudragit L100-55 have mainly been used to produce controlled and delayed release systems, respectively. The use of Eudragit polymers in these processes has frequently been devoted to producing solid dispersions and/or to prepare filaments to be 3D printed in different dosage forms. In this review, we highlight the countless possibilities offered by Eudragit polymers in HME and 3D printing, whether alone or in blends, discussing their prominence in the development of innovative modified drug release systems.

Polymeric and Lipid Nanoparticles: Which Applications in Pediatrics?

This review aims to provide the state of the art on polymeric and lipid nanoparticles, used or suggested to approach pediatric diseases’ problems and needs, and to inspire new researches in this field. Several drugs are currently not available in formulations suitable for pediatric patients. The United States Pediatric Formulation Initiative suggested applying new technologies to pediatric drug formulations, for instance, nanotechnology. The literature analysis showed that polymeric and lipid nanoparticles have been widely studied to treat pediatric diseases, and albumin nanoparticles and liposomes are already used in clinical practice. Nevertheless, these studies are focused almost exclusively on pediatric cancer treatment. Although nanomedicine may solve many needs of pediatric diseases and medicines, the unavailability of data on pharmacokinetics, safety and efficacy of both drugs and nanoparticles in pediatric patients limits the development of new pediatric medicines based on nanoparticles. Therefore, nanomedicine applied in pediatrics remains a significant challenge in the near future.