100% visual inspection of tablets produced with continuous direct compression and coating

Genesis, mechanism, and avoidance of cosmetic coating defects - An industrial case study

Film-coated tablets as solid oral dosage forms are a well-accepted way of administering drugs but are not without specific challenges during manufacturing. One relevant criterion of the final product is the visual integrity and therewith, the absence of cosmetic optical defects such as edge chipping. The aim of the present study was to examine the origin of those edge chipping defects, which were observed during commercial manufacturing of film-coated tablets, and to provide recommendations for process optimization to reduce the defect occurrence. The unraveling of the herein described phenomenon necessitated an interplay of in-depth material characterization, discrete element modeling (DEM) as well as an in-house developed optical measurement system for the automated quantification of tablet defects. As a result of this investigation, the automatic unloading step after the tablet coating process was identified as the most critical step for the occurrence of chipping defects and a replacement by manual unloading was proposed to reduce the defect propensity. The recommended optimization was subsequently confirmed in several manufacturing runs and a reduction of defect propensity by a factor of 5 was observed, highlighting the relevance and the impact of the performed thorough investigation.

Introducing Fiber-Assisted Colorimetric Measurements as a Quality Control Tool of Hot Melt Extruded Filaments

Pharmaceutical and medicinal printing technologies allow personalization and on-demand manufacturing of drug and medicinal products. Being able to manufacture patient tailored dosage forms or medical devices in a pharmacy, medical office, dental laboratory, or hospital at the point of care raises new demands on quality control procedures. For Fused Deposition Modeling, for example, it must be ensured that the starting materials, the (drug-loaded) filaments, are not accidentally exchanged by the operator. This study investigated the potential of colorimetric measurements for direct and indirect determination of the identity of extruded filaments consisting of polymer matrix, different API and/or coloring agents. Since reflection measurements were affected by surface properties of the filaments, a self-constructed filament holder was utilized with an optical fiber positioned in a 180° angle to a white light LED to perform transmission measurements. It was possible to distinguish filaments with different API concentrations by their color values, taking into account that transmission partially decreased by increased API concentration. Therefore, the intensity of the light source had to be adjusted depending on the transparency of the filament. It was shown that colorimetry can be used as a quality control tool to detect differences in drug-loading and is able to distinguish various extruded batches. Additionally, if differences in API/polymer concentrations do not lead to significant changes in L*a*b values, coloring agents were used as additives in low concentrations to color code filaments. In future studies, the setup must be supplemented with a standardized light source and obscuring filters for light intensity adjustments.

Visualising liquid transport through coated pharmaceutical tablets using Terahertz pulsed imaging

Dissolution of pharmaceutical tablets is a complex process, especially for coated tablets where layered structures form an additional barrier for liquid transport into the porous tablet matrix. A better understanding of the role of the coating structure in the mass transport processes that govern drug release, starting with the wetting of the coating layer by the dissolution medium, can benefit the formulation design and optimisation of the production. For this study, terahertz pulsed imaging was used to investigate how dissolution medium can penetrate coated tablets. In order to focus on the fundamental process, the model system for this proof-of-principle study consisted of tablet cores made from pure microcrystalline cellulose compacted to a defined porosity coated with Opadry II, a PVA-based immediate release coating blend. The coating was applied to a single side of flat-faced tablets using vacuum compression moulding. It was possible to resolve the hydration of the coating layer and the subsequent liquid ingress into the dry tablet core. The analysis revealed a discontinuity in density at the interface between coating and core, where coating polymer could enter the pore space at the immediate surface of the tablet cores during the coating process. This structure affected the liquid transport of the dissolution medium into the core. We found evidence for the formation of a gel layer upon hydration of the coating polymer. The porosity of the tablet core impacted the quality of coating and thus affected its dissolution performance (r =  0.6932 for the effective liquid penetration rate RP_eff and the core porosity). This study established a methodology and can facilitate a more in-depth understanding of the role of coating on tablet dissolution.